powerpc/B4860: enable PBL tool for B4860
authorShaohui Xie <Shaohui.Xie@freescale.com>
Sun, 22 Sep 2013 01:56:02 +0000 (09:56 +0800)
committerYork Sun <yorksun@freescale.com>
Wed, 16 Oct 2013 23:13:12 +0000 (16:13 -0700)
Use a default RCW of protocol 0x2A_0x98, and a PBI configure file which
uses CPC1 as 512KB SRAM, then PBL tool can be used on B4860 to build a
pbl boot image.

Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com>
board/freescale/b4860qds/b4_pbi.cfg [new file with mode: 0644]
board/freescale/b4860qds/b4_rcw.cfg [new file with mode: 0644]
include/configs/B4860QDS.h

diff --git a/board/freescale/b4860qds/b4_pbi.cfg b/board/freescale/b4860qds/b4_pbi.cfg
new file mode 100644 (file)
index 0000000..57b726e
--- /dev/null
@@ -0,0 +1,27 @@
+#PBI commands
+#Initialize CPC1
+09010000 00200400
+09138000 00000000
+091380c0 00000100
+#Configure CPC1 as 512KB SRAM
+09010100 00000000
+09010104 fff80009
+09010f00 08000000
+09010000 80000000
+#Configure LAW for CPC1
+09000d00 00000000
+09000d04 fff80000
+09000d08 81000012
+#Configure alternate space
+09000010 00000000
+09000014 ff000000
+09000018 81000000
+#Configure SPI controller
+09110000 80000403
+09110020 2d170008
+09110024 00100008
+09110028 00100008
+0911002c 00100008
+#Flush PBL data
+09138000 00000000
+091380c0 00000000
diff --git a/board/freescale/b4860qds/b4_rcw.cfg b/board/freescale/b4860qds/b4_rcw.cfg
new file mode 100644 (file)
index 0000000..577dabf
--- /dev/null
@@ -0,0 +1,7 @@
+#PBL preamble and RCW header
+aa55aa55 010e0100
+# serdes protocol 0x2A_0x98
+140e0018 0f001218 00000000 00000000
+54980000 9000a000 f8025000 a9000000
+01000000 00000000 00000000 0001b1f8
+00000000 14000020 00000000 00000011
index aa62d94eacb159a2c49c6b8668de5e82b9f623bf..992aea7f55409a747bf09c590a64ded337a111b2 100644 (file)
@@ -16,6 +16,8 @@
 #ifdef CONFIG_RAMBOOT_PBL
 #define CONFIG_RAMBOOT_TEXT_BASE       CONFIG_SYS_TEXT_BASE
 #define CONFIG_RESET_VECTOR_ADDRESS    0xfffffffc
+#define CONFIG_PBLPBI_CONFIG $(SRCTREE)/board/freescale/b4860qds/b4_pbi.cfg
+#define CONFIG_PBLRCW_CONFIG $(SRCTREE)/board/freescale/b4860qds/b4_rcw.cfg
 #endif
 
 #ifdef CONFIG_SRIO_PCIE_BOOT_SLAVE