PCI1 LAW mapping should use CFG_PCI1_MEM_PHY and not _BASE address.
Enable LBC and ECM errors and clear error registers.
Add tftpflash env var to get uboot from tftp server and flash it.
Add pci/pcie convenience env vars to display register space:
"run pcie3regs" to see all pcie3 ccsr registers
"run pcie3cfg" to see all cfg registers
Whitespace cleanup and MPC8544DS.h
Enable CONFIG_INTERRUPTS.
Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
Acked-by: Andy Fleming <afleming@freescale.com>
*/
#define entry_start \
- mflr r1 ; \
- bl 0f ;
+ mflr r1 ; \
+ bl 0f ;
#define entry_end \
0: mflr r0 ; \
.long 0
.long (LAWAR_TRGT_DDR | (LAWAR_SIZE & LAWAR_SIZE_128M)) & ~LAWAR_EN
- .long (CFG_PCI1_MEM_BASE>>12) & 0xfffff
+ .long (CFG_PCI1_MEM_PHYS>>12) & 0xfffff
.long LAWAR_EN | LAWAR_TRGT_PCI1 | (LAWAR_SIZE & LAWAR_SIZE_512M)
.long (CFG_PCI1_IO_PHYS>>12) & 0xfffff
#include <common.h>
#include <command.h>
+#include <pci.h>
#include <asm/processor.h>
#include <asm/immap_85xx.h>
+#include <asm/immap_fsl_pci.h>
#include <spd.h>
#include <miiphy.h>
{
volatile immap_t *immap = (immap_t *) CFG_CCSRBAR;
volatile ccsr_gur_t *gur = &immap->im_gur;
+ volatile ccsr_lbc_t *lbc = &immap->im_lbc;
+ volatile ccsr_local_ecm_t *ecm = &immap->im_local_ecm;
if ((uint)&gur->porpllsr != 0xe00e0000) {
printf("immap size error %x\n",&gur->porpllsr);
}
printf ("Board: MPC8544DS\n");
+ lbc->ltesr = 0xffffffff; /* Clear LBC error interrupts */
+ lbc->lteir = 0xffffffff; /* Enable LBC error interrupts */
+ ecm->eedr = 0xffffffff; /* Clear ecm errors */
+ ecm->eeer = 0xffffffff; /* Enable ecm errors */
+
return 0;
}
}
#endif
+#ifdef CONFIG_PCI1
+static struct pci_controller pci1_hose;
+#endif
+
+#ifdef CONFIG_PCIE1
+static struct pci_controller pcie1_hose;
+#endif
+
+#ifdef CONFIG_PCIE2
+static struct pci_controller pcie2_hose;
+#endif
+
+#ifdef CONFIG_PCIE3
+static struct pci_controller pcie3_hose;
+#endif
+
+int first_free_busno=0;
+
+void
+pci_init_board(void)
+{
+ volatile immap_t *immap = (immap_t *)CFG_IMMR;
+ volatile ccsr_gur_t *gur = &immap->im_gur;
+ uint devdisr = gur->devdisr;
+ uint io_sel = (gur->pordevsr & MPC85xx_PORDEVSR_IO_SEL) >> 19;
+ uint host_agent = (gur->porbmsr & MPC85xx_PORBMSR_HA) >> 16;
+
+ debug (" pci_init_board: devdisr=%x, io_sel=%x, host_agent=%x\n",
+ devdisr, io_sel, host_agent);
+
+ if (io_sel & 1) {
+ if (!(gur->pordevsr & MPC85xx_PORDEVSR_SGMII1_DIS))
+ printf (" eTSEC1 is in sgmii mode.\n");
+ if (!(gur->pordevsr & MPC85xx_PORDEVSR_SGMII3_DIS))
+ printf (" eTSEC3 is in sgmii mode.\n");
+ }
+
+#ifdef CONFIG_PCIE3
+{
+ volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CFG_PCIE3_ADDR;
+ extern void fsl_pci_init(struct pci_controller *hose);
+ struct pci_controller *hose = &pcie3_hose;
+ int pcie_ep = (host_agent == 3);
+ int pcie_configured = io_sel >= 1;
+
+ if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE)){
+ printf ("\n PCIE3 connected to ULI as %s (base address %x)",
+ pcie_ep ? "End Point" : "Root Complex",
+ (uint)pci);
+ if (pci->pme_msg_det) {
+ pci->pme_msg_det = 0xffffffff;
+ debug (" with errors. Clearing. Now 0x%08x",pci->pme_msg_det);
+ }
+ printf ("\n");
+
+ /* inbound */
+ pci_set_region(hose->regions + 0,
+ CFG_PCI_MEMORY_BUS,
+ CFG_PCI_MEMORY_PHYS,
+ CFG_PCI_MEMORY_SIZE,
+ PCI_REGION_MEM | PCI_REGION_MEMORY);
+
+ /* outbound memory */
+ pci_set_region(hose->regions + 1,
+ CFG_PCIE3_MEM_BASE,
+ CFG_PCIE3_MEM_PHYS,
+ CFG_PCIE3_MEM_SIZE,
+ PCI_REGION_MEM);
+
+ /* outbound io */
+ pci_set_region(hose->regions + 2,
+ CFG_PCIE3_IO_BASE,
+ CFG_PCIE3_IO_PHYS,
+ CFG_PCIE3_IO_SIZE,
+ PCI_REGION_IO);
+
+ hose->region_count = 3;
+#ifdef CFG_PCIE3_MEM_BASE2
+ /* outbound memory */
+ pci_set_region(hose->regions + 3,
+ CFG_PCIE3_MEM_BASE2,
+ CFG_PCIE3_MEM_PHYS2,
+ CFG_PCIE3_MEM_SIZE2,
+ PCI_REGION_MEM);
+ hose->region_count++;
+#endif
+ hose->first_busno=first_free_busno;
+ pci_setup_indirect(hose, (int) &pci->cfg_addr, (int) &pci->cfg_data);
+
+ fsl_pci_init(hose);
+
+ first_free_busno=hose->last_busno+1;
+ printf (" PCIE3 on bus %02x - %02x\n",
+ hose->first_busno,hose->last_busno);
+
+ } else {
+ printf (" PCIE3: disabled\n");
+ }
+
+ }
+#else
+ gur->devdisr |= MPC85xx_DEVDISR_PCIE3; /* disable */
+#endif
+
+#ifdef CONFIG_PCIE1
+ {
+ volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CFG_PCIE1_ADDR;
+ extern void fsl_pci_init(struct pci_controller *hose);
+ struct pci_controller *hose = &pcie1_hose;
+ int pcie_ep = (host_agent == 5);
+ int pcie_configured = io_sel & 6;
+
+ if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE)){
+ printf ("\n PCIE1 connected to Slot2 as %s (base address %x)",
+ pcie_ep ? "End Point" : "Root Complex",
+ (uint)pci);
+ if (pci->pme_msg_det) {
+ pci->pme_msg_det = 0xffffffff;
+ debug (" with errors. Clearing. Now 0x%08x",pci->pme_msg_det);
+ }
+ printf ("\n");
+
+ /* inbound */
+ pci_set_region(hose->regions + 0,
+ CFG_PCI_MEMORY_BUS,
+ CFG_PCI_MEMORY_PHYS,
+ CFG_PCI_MEMORY_SIZE,
+ PCI_REGION_MEM | PCI_REGION_MEMORY);
+
+ /* outbound memory */
+ pci_set_region(hose->regions + 1,
+ CFG_PCIE1_MEM_BASE,
+ CFG_PCIE1_MEM_PHYS,
+ CFG_PCIE1_MEM_SIZE,
+ PCI_REGION_MEM);
+
+ /* outbound io */
+ pci_set_region(hose->regions + 2,
+ CFG_PCIE1_IO_BASE,
+ CFG_PCIE1_IO_PHYS,
+ CFG_PCIE1_IO_SIZE,
+ PCI_REGION_IO);
+
+ hose->region_count = 3;
+#ifdef CFG_PCIE1_MEM_BASE2
+ /* outbound memory */
+ pci_set_region(hose->regions + 3,
+ CFG_PCIE1_MEM_BASE2,
+ CFG_PCIE1_MEM_PHYS2,
+ CFG_PCIE1_MEM_SIZE2,
+ PCI_REGION_MEM);
+ hose->region_count++;
+#endif
+ hose->first_busno=first_free_busno;
+
+ pci_setup_indirect(hose, (int) &pci->cfg_addr, (int) &pci->cfg_data);
+
+ fsl_pci_init(hose);
+
+ first_free_busno=hose->last_busno+1;
+ printf(" PCIE1 on bus %02x - %02x\n",
+ hose->first_busno,hose->last_busno);
+
+ } else {
+ printf (" PCIE1: disabled\n");
+ }
+
+ }
+#else
+ gur->devdisr |= MPC85xx_DEVDISR_PCIE; /* disable */
+#endif
+
+#ifdef CONFIG_PCIE2
+ {
+ volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CFG_PCIE2_ADDR;
+ extern void fsl_pci_init(struct pci_controller *hose);
+ struct pci_controller *hose = &pcie2_hose;
+ int pcie_ep = (host_agent == 3);
+ int pcie_configured = io_sel & 4;
+
+ if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE)){
+ printf ("\n PCIE2 connected to Slot 1 as %s (base address %x)",
+ pcie_ep ? "End Point" : "Root Complex",
+ (uint)pci);
+ if (pci->pme_msg_det) {
+ pci->pme_msg_det = 0xffffffff;
+ debug (" with errors. Clearing. Now 0x%08x",pci->pme_msg_det);
+ }
+ printf ("\n");
+
+ /* inbound */
+ pci_set_region(hose->regions + 0,
+ CFG_PCI_MEMORY_BUS,
+ CFG_PCI_MEMORY_PHYS,
+ CFG_PCI_MEMORY_SIZE,
+ PCI_REGION_MEM | PCI_REGION_MEMORY);
+
+ /* outbound memory */
+ pci_set_region(hose->regions + 1,
+ CFG_PCIE2_MEM_BASE,
+ CFG_PCIE2_MEM_PHYS,
+ CFG_PCIE2_MEM_SIZE,
+ PCI_REGION_MEM);
+
+ /* outbound io */
+ pci_set_region(hose->regions + 2,
+ CFG_PCIE2_IO_BASE,
+ CFG_PCIE2_IO_PHYS,
+ CFG_PCIE2_IO_SIZE,
+ PCI_REGION_IO);
+
+ hose->region_count = 3;
+#ifdef CFG_PCIE2_MEM_BASE2
+ /* outbound memory */
+ pci_set_region(hose->regions + 3,
+ CFG_PCIE2_MEM_BASE2,
+ CFG_PCIE2_MEM_PHYS2,
+ CFG_PCIE2_MEM_SIZE2,
+ PCI_REGION_MEM);
+ hose->region_count++;
+#endif
+ hose->first_busno=first_free_busno;
+ pci_setup_indirect(hose, (int) &pci->cfg_addr, (int) &pci->cfg_data);
+
+ fsl_pci_init(hose);
+ first_free_busno=hose->last_busno+1;
+ printf (" PCIE2 on bus %02x - %02x\n",
+ hose->first_busno,hose->last_busno);
+
+ } else {
+ printf (" PCIE2: disabled\n");
+ }
+
+ }
+#else
+ gur->devdisr |= MPC85xx_DEVDISR_PCIE2; /* disable */
+#endif
+
+
+#ifdef CONFIG_PCI1
+{
+ volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CFG_PCI1_ADDR;
+ extern void fsl_pci_init(struct pci_controller *hose);
+ struct pci_controller *hose = &pci1_hose;
+
+ uint pci_agent = (host_agent == 6);
+ uint pci_speed = 66666000; /*get_clock_freq (); PCI PSPEED in [4:5] */
+ uint pci_32 = 1;
+ uint pci_arb = gur->pordevsr & MPC85xx_PORDEVSR_PCI1_ARB; /* PORDEVSR[14] */
+ uint pci_clk_sel = gur->porpllsr & MPC85xx_PORDEVSR_PCI1_SPD; /* PORPLLSR[16] */
+
+
+ if (!(devdisr & MPC85xx_DEVDISR_PCI1)) {
+ printf ("\n PCI: %d bit, %s MHz, %s, %s, %s (base address %x)\n",
+ (pci_32) ? 32 : 64,
+ (pci_speed == 33333000) ? "33" :
+ (pci_speed == 66666000) ? "66" : "unknown",
+ pci_clk_sel ? "sync" : "async",
+ pci_agent ? "agent" : "host",
+ pci_arb ? "arbiter" : "external-arbiter",
+ (uint)pci
+ );
+
+ /* inbound */
+ pci_set_region(hose->regions + 0,
+ CFG_PCI_MEMORY_BUS,
+ CFG_PCI_MEMORY_PHYS,
+ CFG_PCI_MEMORY_SIZE,
+ PCI_REGION_MEM | PCI_REGION_MEMORY);
+
+ /* outbound memory */
+ pci_set_region(hose->regions + 1,
+ CFG_PCI1_MEM_BASE,
+ CFG_PCI1_MEM_PHYS,
+ CFG_PCI1_MEM_SIZE,
+ PCI_REGION_MEM);
+
+ /* outbound io */
+ pci_set_region(hose->regions + 2,
+ CFG_PCI1_IO_BASE,
+ CFG_PCI1_IO_PHYS,
+ CFG_PCI1_IO_SIZE,
+ PCI_REGION_IO);
+ hose->region_count = 3;
+#ifdef CFG_PCIE3_MEM_BASE2
+ /* outbound memory */
+ pci_set_region(hose->regions + 3,
+ CFG_PCIE3_MEM_BASE2,
+ CFG_PCIE3_MEM_PHYS2,
+ CFG_PCIE3_MEM_SIZE2,
+ PCI_REGION_MEM);
+ hose->region_count++;
+#endif
+ hose->first_busno=first_free_busno;
+ pci_setup_indirect(hose, (int) &pci->cfg_addr, (int) &pci->cfg_data);
+
+ fsl_pci_init(hose);
+ first_free_busno=hose->last_busno+1;
+ printf ("PCI on bus %02x - %02x\n",
+ hose->first_busno,hose->last_busno);
+ } else {
+ printf (" PCI: disabled\n");
+ }
+}
+#else
+ gur->devdisr |= MPC85xx_DEVDISR_PCI1; /* disable */
+#endif
+}
+
+
int last_stage_init(void)
{
return 0;
ft_cpu_setup(blob, bd);
+ p = ft_get_prop(blob, "/memory/reg", &len);
+ if (p != NULL) {
+ *p++ = cpu_to_be32(bd->bi_memstart);
+ *p = cpu_to_be32(bd->bi_memsize);
+ }
+#ifdef CONFIG_PCIE1
+ p = (u32 *)ft_get_prop(blob, "/" OF_SOC "/pci@a000/bus-range", &len);
+ if (p != NULL) {
+ p[0] = 0;
+ p[1] = pcie1_hose.last_busno - pcie1_hose.first_busno;
+ debug("PCI@a000 first_busno=%d last_busno=%d\n",p[0],p[1]);
+ }
+#endif
+#ifdef CONFIG_PCIE2
+ p = (u32 *)ft_get_prop(blob, "/" OF_SOC "/pci@9000/bus-range", &len);
+ if (p != NULL) {
+ p[0] = 0;
+ p[1] = pcie2_hose.last_busno - pcie2_hose.first_busno;
+ debug("PCI@9000 first_busno=%d last_busno=%d\n",p[0],p[1]);
+ }
+#endif
+#ifdef CONFIG_PCIE3
+ p = (u32 *)ft_get_prop(blob, "/" OF_SOC "/pci@b000/bus-range", &len);
+ if (p != NULL) {
+ p[0] = 0;
+ p[1] = pcie3_hose.last_busno - pcie3_hose.first_busno;;
+ debug("PCI@b000 first_busno=%d last_busno=%d\n",p[0],p[1]);
+ }
+#endif
+ ft_cpu_setup(blob, bd);
+
p = ft_get_prop(blob, "/memory/reg", &len);
if (p != NULL) {
*p++ = cpu_to_be32(bd->bi_memstart);
/*
* MPC85xx Internal Memory Map
*
+ * Copyright 2007 Freescale Semiconductor.
+ *
* Copyright(c) 2002,2003 Motorola Inc.
* Xianghua Xiao (x.xiao@motorola.com)
*
typedef struct ccsr_gur {
uint porpllsr; /* 0xe0000 - POR PLL ratio status register */
uint porbmsr; /* 0xe0004 - POR boot mode status register */
+#define MPC85xx_PORBMSR_HA 0x00070000
uint porimpscr; /* 0xe0008 - POR I/O impedance status and control register */
uint pordevsr; /* 0xe000c - POR I/O device status regsiter */
+#define MPC85xx_PORDEVSR_SGMII1_DIS 0x20000000
+#define MPC85xx_PORDEVSR_SGMII2_DIS 0x10000000
+#define MPC85xx_PORDEVSR_SGMII3_DIS 0x08000000
+#define MPC85xx_PORDEVSR_SGMII4_DIS 0x04000000
+#define MPC85xx_PORDEVSR_IO_SEL 0x00380000
+#define MPC85xx_PORDEVSR_PCI2_ARB 0x00040000
+#define MPC85xx_PORDEVSR_PCI1_ARB 0x00020000
+#define MPC85xx_PORDEVSR_PCI1_PCI32 0x00010000
+#define MPC85xx_PORDEVSR_PCI1_SPD 0x00008000
+#define MPC85xx_PORDEVSR_PCI2_SPD 0x00004000
+#define MPC85xx_PORDEVSR_DRAM_RTYPE 0x00000060
+#define MPC85xx_PORDEVSR_RIO_CTLS 0x00000008
+#define MPC85xx_PORDEVSR_RIO_DEV_ID 0x00000007
uint pordbgmsr; /* 0xe0010 - POR debug mode status register */
char res1[12];
uint gpporcr; /* 0xe0020 - General-purpose POR configuration register */
uint pmuxcr; /* 0xe0060 - Alternate function signal multiplex control */
char res6[12];
uint devdisr; /* 0xe0070 - Device disable control */
+#define MPC85xx_DEVDISR_PCI1 0x80000000
+#define MPC85xx_DEVDISR_PCI2 0x40000000
+#define MPC85xx_DEVDISR_PCIE 0x20000000
+#define MPC85xx_DEVDISR_LBC 0x08000000
+#define MPC85xx_DEVDISR_PCIE2 0x04000000
+#define MPC85xx_DEVDISR_PCIE3 0x02000000
+#define MPC85xx_DEVDISR_SEC 0x01000000
+#define MPC85xx_DEVDISR_SRIO 0x00080000
+#define MPC85xx_DEVDISR_RMSG 0x00040000
+#define MPC85xx_DEVDISR_DDR 0x00010000
+#define MPC85xx_DEVDISR_CPU 0x00008000
+#define MPC85xx_DEVDISR_TB 0x00004000
+#define MPC85xx_DEVDISR_DMA 0x00000400
+#define MPC85xx_DEVDISR_TSEC1 0x00000080
+#define MPC85xx_DEVDISR_TSEC2 0x00000040
+#define MPC85xx_DEVDISR_TSEC3 0x00000020
+#define MPC85xx_DEVDISR_TSEC4 0x00000010
+#define MPC85xx_DEVDISR_I2C 0x00000004
+#define MPC85xx_DEVDISR_DUART 0x00000002
char res7[12];
uint powmgtcsr; /* 0xe0080 - Power management status and control register */
char res8[12];
uint ddrioovcr; /* 0xe0f24 - DDR IO Override Control */
uint res14; /* 0xe0f28 */
uint tsec34ioovcr; /* 0xe0f2c - eTSEC 3/4 IO override control */
- char res15[61651];
+ char res15[61648]; /* 0xe0f30 to 0xefffff */
} ccsr_gur_t;
#define PORDEVSR_PCI (0x00800000) /* PCI Mode */
#define CONFIG_MPC8544 1
#define CONFIG_MPC8544DS 1
-#undef CONFIG_PCI /* Enable PCI/PCIE */
-#undef CONFIG_PCI1 /* PCI controller 1 */
-#undef CONFIG_PCIE1 /* PCIE controler 1 (slot 1) */
-#undef CONFIG_PCIE2 /* PCIE controler 2 (slot 2) */
-#undef CONFIG_PCIE3 /* PCIE controler 3 (ULI bridge) */
-#undef CONFIG_FSL_PCI_INIT /* Use common FSL init code */
-
-#define CONFIG_TSEC_ENET /* tsec ethernet support */
+#define CONFIG_PCI 1 /* Enable PCI/PCIE */
+#define CONFIG_PCI1 1 /* PCI controller 1 */
+#define CONFIG_PCIE1 1 /* PCIE controler 1 (slot 1) */
+#define CONFIG_PCIE2 1 /* PCIE controler 2 (slot 2) */
+#define CONFIG_PCIE3 1 /* PCIE controler 3 (ULI bridge) */
+#define CONFIG_FSL_PCI_INIT 1 /* Use common FSL init code */
+
+#define CONFIG_TSEC_ENET /* tsec ethernet support */
#define CONFIG_ENV_OVERWRITE
#define CONFIG_SPD_EEPROM /* Use SPD EEPROM for DDR setup */
#undef CONFIG_DDR_DLL
#define CONFIG_MEM_INIT_VALUE 0xDeadBeef
#define CONFIG_DDR_ECC_CMD
+#define CONFIG_INTERRUPTS /* enable pci, srio, ddr interrupts */
/*
* When initializing flash, if we cannot find the manufacturer ID,
/*
* These can be toggled for performance analysis, otherwise use default.
*/
-#define CONFIG_L2_CACHE /* toggle L2 cache */
+#define CONFIG_L2_CACHE /* toggle L2 cache */
#define CONFIG_BTB /* toggle branch predition */
#define CONFIG_ADDR_STREAMING /* toggle addr streaming */
#define CONFIG_CLEAR_LAW0 /* Clear LAW0 in cpu_init_r */
#define CFG_MEMTEST_START 0x00200000 /* memtest works on */
#define CFG_MEMTEST_END 0x00400000
#define CFG_ALT_MEMTEST
-#define CONFIG_PANIC_HANG /* do not reset board on panic */
+#define CONFIG_PANIC_HANG /* do not reset board on panic */
/*
* Base addresses -- Note these are effective addresses where the
* actual resources get mapped (not physical addresses)
*/
-#define CFG_CCSRBAR_DEFAULT 0xff700000 /* CCSRBAR Default */
+#define CFG_CCSRBAR_DEFAULT 0xff700000 /* CCSRBAR Default */
#define CFG_CCSRBAR 0xe0000000 /* relocated CCSRBAR */
#define CFG_IMMR CFG_CCSRBAR /* PQII uses CFG_IMMR */
#define CONFIG_SATA_ULI5288
#define CFG_SCSI_MAX_SCSI_ID 4
#define CFG_SCSI_MAX_LUN 1
-#define CFG_SCSI_MAX_DEVICE (CFG_SCSI_MAX_SCSI_ID * CFG_SCSI_MAX_LUN)
+#define CFG_SCSI_MAX_DEVICE (CFG_SCSI_MAX_SCSI_ID * CFG_SCSI_MAX_LUN)
#define CFG_SCSI_MAXDEVICE CFG_SCSI_MAX_DEVICE
#endif /* SCSCI */
#if defined(CONFIG_TSEC_ENET)
#ifndef CONFIG_NET_MULTI
-#define CONFIG_NET_MULTI 1
+#define CONFIG_NET_MULTI 1
#endif
#define CONFIG_MII 1 /* MII PHY management */
#define CONFIG_TSEC3_NAME "eTSEC3"
#undef CONFIG_MPC85XX_FEC
+#define CONFIG_TSEC_TBI 1 /* enable internal TBI phy */
+#define CONFIG_SGMII_RISER
+#define TSEC1_SGMII_PHY_ADDR_OFFSET 0x1c /* sgmii phy base */
+
#define TSEC1_PHY_ADDR 0
#define TSEC3_PHY_ADDR 1
#define CONFIG_ETHPRIME "eTSEC1"
#define CONFIG_PHY_GIGE 1 /* Include GbE speed/duplex detection */
-
#endif /* CONFIG_TSEC_ENET */
/*
#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
#define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
-
/*
* BOOTP options
*/
#define CONFIG_CMD_PCI
#define CONFIG_CMD_BEDBUG
#define CONFIG_CMD_NET
+ #define CONFIG_CMD_SCSI
+ #define CONFIG_CMD_EXT2
#endif
* have to be in the first 8 MB of memory, since this is
* the maximum mapped by the Linux kernel during initialization.
*/
-#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux*/
+#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux*/
/* Cache Configuration */
-#define CFG_DCACHE_SIZE 32768
+#define CFG_DCACHE_SIZE 32768
#define CFG_CACHELINE_SIZE 32
#if defined(CONFIG_CMD_KGDB)
#define CFG_CACHELINE_SHIFT 5 /*log base 2 of the above value*/
#define CONFIG_HOSTNAME 8544ds_unknown
#define CONFIG_ROOTPATH /nfs/mpc85xx
-#define CONFIG_BOOTFILE 8544ds_tmt/uImage.uboot
+#define CONFIG_BOOTFILE 8544ds/uImage.uboot
+#define CONFIG_UBOOTPATH 8544ds/u-boot.bin /* TFTP server */
#define CONFIG_SERVERIP 192.168.0.1
#define CONFIG_GATEWAYIP 192.168.0.1
#define CONFIG_LOADADDR 1000000 /*default location for tftp and bootm*/
#define CONFIG_BOOTDELAY 10 /* -1 disables auto-boot */
-#undef CONFIG_BOOTARGS /* the boot command will set bootargs*/
+#undef CONFIG_BOOTARGS /* the boot command will set bootargs*/
#define CONFIG_BAUDRATE 115200
#define PCIE_ENV \
"pciereg=md ${a}000 6; md ${a}020 4; md ${a}bf8 2; echo o;md ${a}c00 25;" \
"echo i; md ${a}da0 15; echo e;md ${a}e00 e; echo d; md ${a}f00 c\0" \
- "pcie1regs=setenv a e000a; run pciereg\0" \
- "pcie2regs=setenv a e0009; run pciereg\0" \
- "pcie3regs=setenv a e000b; run pciereg\0" \
- "pcieerr=md ${a}020 1; md ${a}e00;" \
+ "pcieerr=md ${a}020 1; md ${a}e00 e;" \
"pci d.b $b.0 7 1; pci d.w $b.0 1e 1;" \
"pci d.w $b.0 56 1;" \
"pci d $b.0 104 1;pci d $b.0 110 1;pci d $b.0 130 1\0" \
"pci w $b.0 104 ffffffff; pci w $b.0 110 ffffffff;" \
"pci w $b.0 130 ffffffff\0" \
"pciecfg=pci d $b.0 0 20; pci d $b.0 100 e; pci d $b.0 400 69\0" \
- "pcie1err=setenv a e000a; run pcieerr\0" \
- "pcie2err=setenv a e0009; run pcieerr\0" \
- "pcie3err=setenv a e000b; run pcieerr\0" \
- "pcie1errc=setenv a e000a; run pcieerrc\0" \
- "pcie2errc=setenv a e0009; run pcieerrc\0" \
- "pcie3errc=setenv a e000b; run pcieerrc\0"
+ "pcie1regs=setenv a e000a; run pciereg\0" \
+ "pcie2regs=setenv a e0009; run pciereg\0" \
+ "pcie3regs=setenv a e000b; run pciereg\0" \
+ "pcie1cfg=setenv b 3; run pciecfg\0" \
+ "pcie2cfg=setenv b 5; run pciecfg\0" \
+ "pcie3cfg=setenv b 0; run pciecfg\0" \
+ "pcie1err=setenv a e000a; setenv b 3; run pcieerr\0" \
+ "pcie2err=setenv a e0009; setenv b 5; run pcieerr\0" \
+ "pcie3err=setenv a e000b; setenv b 0; run pcieerr\0" \
+ "pcie1errc=setenv a e000a; setenv b 3; run pcieerrc\0" \
+ "pcie2errc=setenv a e0009; setenv b 5; run pcieerrc\0" \
+ "pcie3errc=setenv a e000b; setenv b 0; run pcieerrc\0"
#else
#define PCIE_ENV ""
#endif
#if defined(CONFIG_PCI1)
#define PCI_ENV \
"pcireg=md ${a}000 3; echo o;md ${a}c00 25; echo i; md ${a}da0 15;" \
- "echo e;md ${a}e00 9\0" \
+ "echo e;md ${a}e00 9\0" \
"pci1regs=setenv a e0008; run pcireg\0" \
"pcierr=md ${a}e00 8; pci d.b $b.0 7 1; pci d.w $b.0 1e 1;" \
"pci d.w $b.0 56 1\0" \
- "pcierrc=mw ${a}e00 ffffffff; pci w.b $b.0 7 ff; pci w.w $b.0 1e ffff;" \
- "pci w.w $b.0 56 ffff\0" \
- "pci1err=setenv a e0008; run pcierr\0" \
- "pci1errc=setenv a e0008; run pcierrc\0"
+ "pcierrc=mw ${a}e00 ffffffff; mw ${a}e0c 0; pci w.b $b.0 7 ff;" \
+ "pci w.w $b.0 1e ffff; pci w.w $b.0 56 ffff\0" \
+ "pci1err=setenv a e0008; setenv b 7; run pcierr\0" \
+ "pci1errc=setenv a e0008; setenv b 7; run pcierrc\0"
#else
#define PCI_ENV ""
#endif
#define ENET_ENV ""
#endif
-#define CONFIG_EXTRA_ENV_SETTINGS \
- "netdev=eth0\0" \
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "netdev=eth0\0" \
+ "uboot=" MK_STR(CONFIG_UBOOTPATH) "\0" \
+ "tftpflash=tftpboot $loadaddr $uboot; " \
+ "protect off " MK_STR(TEXT_BASE) " +$filesize; " \
+ "erase " MK_STR(TEXT_BASE) " +$filesize; " \
+ "cp.b $loadaddr " MK_STR(TEXT_BASE) " $filesize; " \
+ "protect on " MK_STR(TEXT_BASE) " +$filesize; " \
+ "cmp.b $loadaddr " MK_STR(TEXT_BASE) " $filesize\0" \
"consoledev=ttyS0\0" \
"ramdiskaddr=2000000\0" \
- "ramdiskfile=8544ds_tmt/ramdisk.uboot\0" \
- "fdtaddr=400000\0" \
- "fdtfile=8544ds_tmt/mpc8544ds.dtb\0" \
- "eoi=mw e00400b0 0\0" \
- "iack=md e00400a0 1\0" \
+ "ramdiskfile=8544ds/ramdisk.uboot\0" \
+ "dtbaddr=c00000\0" \
+ "dtbfile=8544ds/mpc8544ds.dtb\0" \
+ "bdev=sda3\0" \
+ "eoi=mw e00400b0 0\0" \
+ "iack=md e00400a0 1\0" \
"ddrreg=md ${a}000 8; md ${a}080 8;md ${a}100 d; md ${a}140 4; md ${a}bf0 4;" \
"md ${a}e00 3; md ${a}e20 3; md ${a}e40 7; md ${a}f00 5\0" \
- "ddrregs=setenv a e0002; run ddrreg\0" \
+ "ddrregs=setenv a e0002; run ddrreg\0" \
"gureg=md ${a}000 2c; md ${a}0b0 1; md ${a}0c0 1; md ${a}b20 3;" \
- "md ${a}e00 1; md ${a}e60 1; md ${a}ef0 15\0" \
- "guregs=setenv a e00e0; run gureg\0" \
+ "md ${a}e00 1; md ${a}e60 1; md ${a}ef0 15\0" \
+ "guregs=setenv a e00e0; run gureg\0" \
"ecmreg=md ${a}000 1; md ${a}010 1; md ${a}bf8 2; md ${a}e00 6\0" \
- "ecmregs=setenv a e0001; run ecmreg\0" \
- PCIE_ENV \
- PCI_ENV \
+ "ecmregs=setenv a e0001; run ecmreg\0" \
+ "lawregs=md e0000c08 4b\0" \
+ "lbcregs=md e0005000 36\0" \
+ "dma0regs=md e0021100 12\0" \
+ "dma1regs=md e0021180 12\0" \
+ "dma2regs=md e0021200 12\0" \
+ "dma3regs=md e0021280 12\0" \
+ PCIE_ENV \
+ PCI_ENV \
ENET_ENV
"ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
"console=$consoledev,$baudrate $othbootargs;" \
"tftp $loadaddr $bootfile;" \
- "tftp $fdtaddr $fdtfile;" \
- "bootm $loadaddr - $fdtaddr"
+ "tftp $dtbaddr $dtbfile;" \
+ "bootm $loadaddr - $dtbaddr"
-#define CONFIG_RAMBOOTCOMMAND \
+#define CONFIG_RAMBOOTCOMMAND \
"setenv bootargs root=/dev/ram rw " \
"console=$consoledev,$baudrate $othbootargs;" \
"tftp $ramdiskaddr $ramdiskfile;" \
"tftp $loadaddr $bootfile;" \
- "tftp $fdtaddr $fdtfile;" \
- "bootm $loadaddr $ramdiskaddr $fdtaddr"
+ "tftp $dtbaddr $dtbfile;" \
+ "bootm $loadaddr $ramdiskaddr $dtbaddr"
-#define CONFIG_BOOTCOMMAND \
- "setenv bootargs root=/dev/sda3 rw " \
+#define CONFIG_BOOTCOMMAND \
+ "setenv bootargs root=/dev/$bdev rw " \
"console=$consoledev,$baudrate $othbootargs;" \
"tftp $loadaddr $bootfile;" \
- "tftp $fdtaddr $fdtfile;" \
- "bootm $loadaddr - $fdtaddr"
+ "tftp $dtbaddr $dtbfile;" \
+ "bootm $loadaddr - $dtbaddr"
#endif /* __CONFIG_H */
projects / oweals / u-boot.git / commitdiff