x86: coreboot: Implement recursively scanning PCI busses

A hook is installed to configure PCI bus bridges as they encountered by u-boot.
The hook extracts the secondary bus number from the bridge's config space and
then recursively scans that bus.

On Coreboot, the PCI bus address space has identity mapping with the
physical address space, so declare it as such to ensure that the "pci_map_bar"
function used by some PCI drivers is behaving properly. This fixes the
EHCI PCI driver initialization on Stumpy.

This was tested as follows:

Ran the PCI command on Alex, saw devices on bus 0, the OXPCIe 952 on
bus 1, and empty busses 2 through 5. This matches the bridges
reported on bus 0 and the PCI configuration output from coreboot.

Signed-off-by: Gabe Black <gabeblack@chromium.org>
Signed-off-by: Vincent Palatin <vpalatin@chromium.org>
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Signed-off-by: Simon Glass <sjg@chromium.org>

diff --git a/arch/x86/cpu/coreboot/pci.c b/arch/x86/cpu/coreboot/pci.c
index 0ddc97501b7807ef72c322d0e88ab5e2bf4b9846..8f941674806ce749087a0d678abfe2aa3c131dd4 100644 (file)
--- a/arch/x86/cpu/coreboot/pci.c
+++ b/arch/x86/cpu/coreboot/pci.c
@@ -31,15 +31,35 @@
 
 static struct pci_controller coreboot_hose;
 
+static void config_pci_bridge(struct pci_controller *hose, pci_dev_t dev,
+                             struct pci_config_table *table)
+{
+       u8 secondary;
+       hose->read_byte(hose, dev, PCI_SECONDARY_BUS, &secondary);
+       hose->last_busno = max(hose->last_busno, secondary);
+       pci_hose_scan_bus(hose, secondary);
+}
+
+static struct pci_config_table pci_coreboot_config_table[] = {
+       /* vendor, device, class, bus, dev, func */
+       { PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_BRIDGE_PCI,
+               PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, &config_pci_bridge },
+       {}
+};
+
 void pci_init_board(void)
 {
+       coreboot_hose.config_table = pci_coreboot_config_table;
        coreboot_hose.first_busno = 0;
-       coreboot_hose.last_busno = 0xff;
-       coreboot_hose.region_count = 0;
+       coreboot_hose.last_busno = 0;
+
+       pci_set_region(coreboot_hose.regions + 0, 0x0, 0x0, 0xffffffff,
+               PCI_REGION_MEM);
+       coreboot_hose.region_count = 1;
 
        pci_setup_type1(&coreboot_hose);
 
        pci_register_hose(&coreboot_hose);
 
-       coreboot_hose.last_busno = pci_hose_scan(&coreboot_hose);
+       pci_hose_scan(&coreboot_hose);
 }