rockchip: rk3368: use common TPL board file
authorKever Yang <kever.yang@rock-chips.com>
Tue, 9 Jul 2019 14:05:58 +0000 (22:05 +0800)
committerKever Yang <kever.yang@rock-chips.com>
Sat, 20 Jul 2019 15:59:44 +0000 (23:59 +0800)
Use common tpl.c instead of rk3368-board-tpl.c

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
arch/arm/mach-rockchip/Kconfig
arch/arm/mach-rockchip/Makefile
arch/arm/mach-rockchip/rk3368-board-tpl.c [deleted file]

index 8a7f2bbea05c5673791615103b1404a7a3c4815b..3c17994452b107b7cf90f5ee325798c4cd9cf8bb 100644 (file)
@@ -127,6 +127,7 @@ config ROCKCHIP_RK3368
        imply SPL_SEPARATE_BSS
        imply SPL_SERIAL_SUPPORT
        imply TPL_SERIAL_SUPPORT
+       imply TPL_ROCKCHIP_COMMON_BOARD
        help
          The Rockchip RK3368 is a ARM-based SoC with a octa-core (organised
          into a big and little cluster with 4 cores each) Cortex-A53 including
index d01293bd25da568ee63424d2a9e19fe0e2567e8d..c1b1c31d02c583375ca5a13f9b1ad56bd9bab2eb 100644 (file)
@@ -10,7 +10,6 @@ obj-spl-$(CONFIG_ROCKCHIP_BROM_HELPER) += bootrom.o
 obj-tpl-$(CONFIG_ROCKCHIP_BROM_HELPER) += bootrom.o
 obj-tpl-$(CONFIG_TPL_ROCKCHIP_COMMON_BOARD) += tpl.o
 
-obj-tpl-$(CONFIG_ROCKCHIP_RK3368) += rk3368-board-tpl.o
 obj-tpl-$(CONFIG_ROCKCHIP_RK3399) += rk3399-board-tpl.o
 
 obj-spl-$(CONFIG_ROCKCHIP_RK3036) += rk3036-board-spl.o
diff --git a/arch/arm/mach-rockchip/rk3368-board-tpl.c b/arch/arm/mach-rockchip/rk3368-board-tpl.c
deleted file mode 100644 (file)
index fdb1c3b..0000000
+++ /dev/null
@@ -1,74 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * (C) Copyright 2017 Theobroma Systems Design und Consulting GmbH
- */
-
-#include <common.h>
-#include <debug_uart.h>
-#include <dm.h>
-#include <ram.h>
-#include <spl.h>
-#include <asm/io.h>
-#include <asm/arch-rockchip/bootrom.h>
-
-#define TIMER_LOAD_COUNT_L     0x00
-#define TIMER_LOAD_COUNT_H     0x04
-#define TIMER_CONTROL_REG      0x10
-#define TIMER_EN       0x1
-#define        TIMER_FMODE     BIT(0)
-#define        TIMER_RMODE     BIT(1)
-
-__weak void rockchip_stimer_init(void)
-{
-       writel(0, CONFIG_ROCKCHIP_STIMER_BASE + TIMER_CONTROL_REG);
-       writel(0xffffffff, CONFIG_ROCKCHIP_STIMER_BASE);
-       writel(0xffffffff, CONFIG_ROCKCHIP_STIMER_BASE + 4);
-       writel(TIMER_EN | TIMER_FMODE, CONFIG_ROCKCHIP_STIMER_BASE +
-              TIMER_CONTROL_REG);
-}
-
-void board_init_f(ulong dummy)
-{
-       struct udevice *dev;
-       int ret;
-
-#ifdef CONFIG_DEBUG_UART
-       /*
-        * Debug UART can be used from here if required:
-        *
-        * debug_uart_init();
-        * printch('a');
-        * printhex8(0x1234);
-        * printascii("string");
-        */
-       debug_uart_init();
-       printascii("U-Boot TPL board init\n");
-#endif
-
-       ret = spl_early_init();
-       if (ret) {
-               debug("spl_early_init() failed: %d\n", ret);
-               hang();
-       }
-
-       /* Init secure timer */
-       rockchip_stimer_init();
-       /* Init ARM arch timer in arch/arm/cpu/ */
-       timer_init();
-
-       ret = uclass_get_device(UCLASS_RAM, 0, &dev);
-       if (ret) {
-               debug("DRAM init failed: %d\n", ret);
-               return;
-       }
-}
-
-void board_return_to_bootrom(void)
-{
-       back_to_bootrom(BROM_BOOT_NEXTSTAGE);
-}
-
-u32 spl_boot_device(void)
-{
-       return BOOT_DEVICE_BOOTROM;
-}