config PHY_MICREL
bool "Micrel Ethernet PHYs support"
+ help
+ Enable support for the GbE PHYs manufactured by Micrel (now
+ a part of Microchip). This includes drivers for the KSZ804,
+ KSZ8031, KSZ8051, KSZ8081, KSZ8895, KSZ886x, KSZ8721
+ either/or KSZ9021 (see the "Micrel KSZ9021 family support"
+ config option for details), and KSZ9031 (if configured).
+
+if PHY_MICREL
+
+config PHY_MICREL_KSZ9021
+ bool "Micrel KSZ9021 family support"
+ select PHY_GIGE
+ help
+ Enable support for the Micrel KSZ9021 GbE PHY family. If
+ enabled, the extended register read/write for KSZ9021 PHYs
+ is supported through the 'mdio' command and any RGMII signal
+ delays configured in the device tree will be applied to the
+ PHY during initialisation.
+
+ Note that the KSZ9021 uses the same part number os the
+ KSZ8921BL, so enabling this option disables support for the
+ KSZ8721BL.
+
+config PHY_MICREL_KSZ9031
+ bool "Micrel KSZ9031 family support"
+ select PHY_GIGE
+ help
+ Enable support for the Micrel KSZ9031 GbE PHY family. If
+ enabled, the extended register read/write for KSZ9021 PHYs
+ is supported through the 'mdio' command and any RGMII signal
+ delays configured in the device tree will be applied to the
+ PHY during initialisatioin.
+
+endif # PHY_MICREL
+ config PHY_MICREL_KSZ9021
+ bool "Micrel KSZ9021 Ethernet PHYs support"
+ depends on PHY_MICREL
+ help
+ KSZ9021 is a completely integrated triple speed (10Base-T/100Base-TX/1000Base-T)
+ Ethernet Physical Layer Transceiver for transmission and reception of data over
+ standard CAT-5 unshielded twisted pair (UTP) cable.
+
config PHY_MSCC
bool "Microsemi Corp Ethernet PHYs support"
--- /dev/null
-# define CONFIG_HASH_VERIFY
+ /*
+ * Copyright (C) 2016 Amarula Solutions B.V.
+ * Copyright (C) 2016 Engicam S.r.l.
+ *
+ * Configuration settings for the Engicam i.MX6 SOM Starter Kits.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+ #ifndef __IMX6_ENGICAM_CONFIG_H
+ #define __IMX6_ENGICAM_CONFIG_H
+
+ #include <linux/sizes.h>
+ #include "mx6_common.h"
+
+ /* Size of malloc() pool */
+ #define CONFIG_SYS_MALLOC_LEN (16 * SZ_1M)
+
+ /* Total Size of Environment Sector */
+ #define CONFIG_ENV_SIZE SZ_128K
+
+ /* Allow to overwrite serial and ethaddr */
+ #define CONFIG_ENV_OVERWRITE
+
+ /* Environment */
+ #ifndef CONFIG_ENV_IS_NOWHERE
+ /* Environment in MMC */
+ # if defined(CONFIG_ENV_IS_IN_MMC)
+ # define CONFIG_ENV_OFFSET 0x100000
+ /* Environment in NAND */
+ # elif defined(CONFIG_ENV_IS_IN_NAND)
+ # define CONFIG_ENV_OFFSET 0x400000
+ # define CONFIG_ENV_SECT_SIZE CONFIG_ENV_SIZE
+ # endif
+ #endif
+
+ /* Default environment */
+ #define CONFIG_EXTRA_ENV_SETTINGS \
+ "script=boot.scr\0" \
+ "splashpos=m,m\0" \
+ "image=uImage\0" \
+ "fit_image=fit.itb\0" \
+ "fdt_high=0xffffffff\0" \
+ "fdt_addr=" FDT_ADDR "\0" \
+ "boot_fdt=try\0" \
+ "mmcpart=1\0" \
+ "nandroot=ubi0:rootfs rootfstype=ubifs\0" \
+ "mmcautodetect=yes\0" \
+ "mmcargs=setenv bootargs console=${console},${baudrate} " \
+ "root=${mmcroot}\0" \
+ "ubiargs=setenv bootargs console=${console},${baudrate} " \
+ "ubi.mtd=5 root=${nandroot} ${mtdparts}\0" \
+ "loadbootscript=" \
+ "fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
+ "bootscript=echo Running bootscript from mmc ...; " \
+ "source\0" \
+ "loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
+ "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
+ "loadfit=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${fit_image}\0" \
+ "fitboot=echo Booting FIT image from mmc ...; " \
+ "run mmcargs; " \
+ "bootm ${loadaddr}\0" \
+ "_mmcboot=run mmcargs; " \
+ "run mmcargs; " \
+ "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
+ "if run loadfdt; then " \
+ "bootm ${loadaddr} - ${fdt_addr}; " \
+ "else " \
+ "if test ${boot_fdt} = try; then " \
+ "bootm; " \
+ "else " \
+ "echo WARN: Cannot load the DT; " \
+ "fi; " \
+ "fi; " \
+ "else " \
+ "bootm; " \
+ "fi\0" \
+ "mmcboot=echo Booting from mmc ...; " \
+ "if mmc rescan; then " \
+ "if run loadbootscript; then " \
+ "run bootscript; " \
+ "else " \
+ "if run loadfit; then " \
+ "run fitboot; " \
+ "else " \
+ "if run loadimage; then " \
+ "run _mmcboot; " \
+ "fi; " \
+ "fi; " \
+ "fi; " \
+ "fi\0" \
+ "nandboot=echo Booting from nand ...; " \
+ "if mtdparts; then " \
+ "echo Starting nand boot ...; " \
+ "else " \
+ "mtdparts default; " \
+ "fi; " \
+ "run ubiargs; " \
+ "nand read ${loadaddr} kernel 0x800000; " \
+ "nand read ${fdt_addr} dtb 0x100000; " \
+ "bootm ${loadaddr} - ${fdt_addr}\0"
+
+ #define CONFIG_BOOTCOMMAND "run $modeboot"
+
+ /* Miscellaneous configurable options */
+ #define CONFIG_SYS_MEMTEST_START 0x80000000
+ #define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + 0x8000000)
+
+ #define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
+ #define CONFIG_SYS_HZ 1000
+
+ #ifdef CONFIG_MX6UL
+ # define DRAM_OFFSET(x) 0x87##x
+ # define FDT_ADDR __stringify(DRAM_OFFSET(800000))
+ #else
+ # define DRAM_OFFSET(x) 0x1##x
+ # define FDT_ADDR __stringify(DRAM_OFFSET(8000000))
+ #endif
+
+ /* Physical Memory Map */
+ #define CONFIG_NR_DRAM_BANKS 1
+ #define PHYS_SDRAM MMDC0_ARB_BASE_ADDR
+
+ #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
+ #define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
+ #define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
+
+ #define CONFIG_SYS_INIT_SP_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \
+ GENERATED_GBL_DATA_SIZE)
+ #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \
+ CONFIG_SYS_INIT_SP_OFFSET)
+
+ /* FIT */
+ #ifdef CONFIG_FIT
+ # define CONFIG_IMAGE_FORMAT_LEGACY
+ #endif
+
+ /* UART */
+ #ifdef CONFIG_MXC_UART
+ # ifdef CONFIG_MX6UL
+ # define CONFIG_MXC_UART_BASE UART1_BASE
+ # else
+ # define CONFIG_MXC_UART_BASE UART4_BASE
+ # endif
+ #endif
+
+ /* MMC */
+ #ifdef CONFIG_FSL_USDHC
+ # define CONFIG_SYS_MMC_ENV_DEV 0
+ #endif
+
+ /* NAND */
+ #ifdef CONFIG_NAND_MXS
+ # define CONFIG_SYS_MAX_NAND_DEVICE 1
+ # define CONFIG_SYS_NAND_BASE 0x40000000
+ # define CONFIG_SYS_NAND_5_ADDR_CYCLE
+ # define CONFIG_SYS_NAND_ONFI_DETECTION
+ # define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE
+ # define CONFIG_SYS_NAND_U_BOOT_OFFS 0x200000
+
+ /* MTD device */
+ # define CONFIG_MTD_DEVICE
+ # define CONFIG_CMD_MTDPARTS
+ # define CONFIG_MTD_PARTITIONS
+ # define MTDIDS_DEFAULT "nand0=gpmi-nand"
+ # define MTDPARTS_DEFAULT "mtdparts=gpmi-nand:2m(spl),2m(uboot)," \
+ "1m(env),8m(kernel),1m(dtb),-(rootfs)"
+
+ /* UBI */
+ # define CONFIG_CMD_UBIFS
+ # define CONFIG_RBTREE
+ # define CONFIG_LZO
+
+ # define CONFIG_APBH_DMA
+ # define CONFIG_APBH_DMA_BURST
+ # define CONFIG_APBH_DMA_BURST8
+ #endif
+
+ /* Ethernet */
+ #ifdef CONFIG_FEC_MXC
+ # ifdef CONFIG_TARGET_MX6Q_ICORE_RQS
+ # define CONFIG_FEC_MXC_PHYADDR 3
+ # define CONFIG_FEC_XCV_TYPE RGMII
+ # else
+ # define CONFIG_FEC_MXC_PHYADDR 0
+ # define CONFIG_FEC_XCV_TYPE RMII
+ # endif
+
+ # define CONFIG_MII
+ #endif
+
+ /* Framebuffer */
+ #ifdef CONFIG_VIDEO_IPUV3
+ # define CONFIG_IPUV3_CLK 260000000
+ # define CONFIG_IMX_VIDEO_SKIP
+
+ # define CONFIG_SPLASH_SCREEN
+ # define CONFIG_SPLASH_SCREEN_ALIGN
+ # define CONFIG_BMP_16BPP
+ # define CONFIG_VIDEO_BMP_RLE8
+ # define CONFIG_VIDEO_LOGO
+ # define CONFIG_VIDEO_BMP_LOGO
+ #endif
+
+ /* SPL */
+ #ifdef CONFIG_SPL
+ # ifdef CONFIG_NAND_MXS
+ # define CONFIG_SPL_NAND_SUPPORT
+ # else
+ # define CONFIG_SPL_MMC_SUPPORT
+ # endif
+
+ # include "imx6_spl.h"
+ # ifdef CONFIG_SPL_BUILD
+ # if defined(CONFIG_TARGET_MX6Q_ICORE_RQS) || defined(CONFIG_TARGET_MX6UL_ISIOT)
+ # define CONFIG_SYS_FSL_USDHC_NUM 2
+ # else
+ # define CONFIG_SYS_FSL_USDHC_NUM 1
+ # endif
+
+ # define CONFIG_SYS_FSL_ESDHC_ADDR 0
+ # undef CONFIG_DM_GPIO
+ # undef CONFIG_DM_MMC
+ # endif
+ #endif
+
+ #endif /* __IMX6_ENGICAM_CONFIG_H */
projects / oweals / u-boot.git / commitdiff