sun7i: Add new Bananapro board / defconfig

Add support for the new Bananapro A20 development board from lemaker.org.
This board features 1G RAM, 2 USB A receptacles, 1 micro USB receptacle for
OTG, 1 micro USB receptacle for power, HDMI, sata, Gbit ethernet, ir receiver,
3.5 mm jack for a/v out, on board microphone, 40 gpio pins and sdio wifi.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Ian Campbell <ijc@hellion.org.uk>

diff --git a/board/sunxi/Kconfig b/board/sunxi/Kconfig
index 8d3016272a8e684ef5e666d89e6cbeb3fc4da947..80dc3f96baef2c617966b004ecfbdce998516d84 100644 (file)
--- a/board/sunxi/Kconfig
+++ b/board/sunxi/Kconfig
@@ -96,6 +96,10 @@ config TARGET_BANANAPI
        bool "BANANAPI"
        depends on MACH_SUN7I
 
+config TARGET_BANANAPRO
+       bool "BANANAPRO"
+       depends on MACH_SUN7I
+
 config TARGET_COLOMBUS
        bool "COLOMBUS"
        depends on MACH_SUN6I

diff --git a/board/sunxi/MAINTAINERS b/board/sunxi/MAINTAINERS
index c45b8616c1dc1c9f4cc309cfe3aadff8d3482597..d926d2e469e519d9d7954a6eed71008d0cb2ff05 100644 (file)
--- a/board/sunxi/MAINTAINERS
+++ b/board/sunxi/MAINTAINERS
@@ -23,6 +23,7 @@ F:    configs/Mele_M9_defconfig
 F:     include/configs/sun7i.h
 F:     configs/A20-OLinuXino_MICRO_defconfig
 F:     configs/Bananapi_defconfig
+F:     configs/Bananapro_defconfig
 F:     configs/i12-tvbox_defconfig
 F:     configs/Linksprite_pcDuino3_defconfig
 F:     configs/Linksprite_pcDuino3_fdt_defconfig

diff --git a/board/sunxi/Makefile b/board/sunxi/Makefile
index 97aff10e07160e790eb1ff141b1db9fa2f1276f2..8ca01f670a296516d891ec33f479a106adf75b20 100644 (file)
--- a/board/sunxi/Makefile
+++ b/board/sunxi/Makefile
@@ -22,6 +22,7 @@ obj-$(CONFIG_TARGET_A20_OLINUXINO_M)  += dram_sun7i_384_1024_iow16.o
 obj-$(CONFIG_TARGET_AUXTEK_T004)       += dram_a10s_olinuxino_m.o
 obj-$(CONFIG_TARGET_BA10_TV_BOX)       += dram_sun4i_384_1024_iow8.o
 obj-$(CONFIG_TARGET_BANANAPI)          += dram_bananapi.o
+obj-$(CONFIG_TARGET_BANANAPRO)         += dram_bananapi.o
 obj-$(CONFIG_TARGET_CUBIEBOARD)                += dram_cubieboard.o
 obj-$(CONFIG_TARGET_CUBIEBOARD2)       += dram_cubieboard2.o
 obj-$(CONFIG_TARGET_CUBIETRUCK)                += dram_cubietruck.o

diff --git a/board/sunxi/gmac.c b/board/sunxi/gmac.c
index 571bc9e0ab0d49ba3ab6c1ef621adff2f038441e..4e4615e12f654fed06c8200ce5061e1ba76e2493 100644 (file)
--- a/board/sunxi/gmac.c
+++ b/board/sunxi/gmac.c
@@ -34,7 +34,7 @@ int sunxi_gmac_initialize(bd_t *bis)
         * need to set bits 10-12 GTXDC "GMAC Transmit Clock Delay Chain"
         * of the GMAC clk register to 3.
         */
-#ifdef CONFIG_TARGET_BANANAPI
+#if defined CONFIG_TARGET_BANANAPI || defined CONFIG_TARGET_BANANAPRO
        setbits_le32(&ccm->gmac_clk_cfg, 0x3 << 10);
 #endif
 

diff --git a/configs/Bananapro_defconfig b/configs/Bananapro_defconfig
new file mode 100644 (file)
index 0000000..7f9ce13
--- /dev/null
+++ b/configs/Bananapro_defconfig
@@ -0,0 +1,9 @@
+CONFIG_SPL=y
+CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_GMAC,RGMII,MACPWR=SUNXI_GPH(23),AHCI,USB_EHCI"
+CONFIG_FDTFILE="sun7i-a20-bananapro.dtb"
+CONFIG_USB1_VBUS_PIN="PH0"
+CONFIG_USB2_VBUS_PIN="PH1"
++S:CONFIG_ARM=y
++S:CONFIG_ARCH_SUNXI=y
++S:CONFIG_MACH_SUN7I=y
++S:CONFIG_TARGET_BANANAPRO=y