Changes to Yellowstone & Yosemite 440EP/GR eval boards:
authorStefan Roese <sr@denx.de>
Thu, 15 Dec 2005 08:43:12 +0000 (09:43 +0100)
committerStefan Roese <sr@denx.de>
Thu, 15 Dec 2005 08:43:12 +0000 (09:43 +0100)
- Changed GPIO setup to enable another address line in order to
  address 64M of FLASH.
- Added function sdram_tr1_set to auto calculate the tr1 value for
  the DDR.
Patch by Steven Blakeslee, 12 Dec 2005

CHANGELOG
board/amcc/yellowstone/yellowstone.c
board/amcc/yosemite/yosemite.c

index ac3be077d14a6c39a3aff439695ecd6bad1e7abb..e5c53d80f836adf3518ed677dd038f5fd4fa2c10 100644 (file)
--- a/CHANGELOG
+++ b/CHANGELOG
@@ -2,6 +2,13 @@
 Changes for U-Boot 1.1.4:
 ======================================================================
 
+* Changes to Yellowstone & Yosemite 440EP/GR eval boards:
+  - Changed GPIO setup to enable another address line in order to
+    address 64M of FLASH.
+  - Added function sdram_tr1_set to auto calculate the tr1 value for
+    the DDR.
+  Patch by Steven Blakeslee, 12 Dec 2005
+
 * Change port configuration for O2DNT (CODEC1 on PSC1).
 
 * Fix register for PCI async mode on PPC440EP
index 585f0720fb3b8136e5ab31b0f9774b16e2cbdd42..8ddf910c8e4e37264ab8e4f292bc9abb3da241f1 100644 (file)
@@ -59,10 +59,10 @@ int board_early_init_f(void)
         * Setup the GPIO pins
         *-------------------------------------------------------------------*/
        /*CPLD cs */
-       /*setup Address lines for flash sizes larger than 16Meg. */
-       out32(GPIO0_OSRL, in32(GPIO0_OSRL) | 0x40010000);
-       out32(GPIO0_TSRL, in32(GPIO0_TSRL) | 0x40010000);
-       out32(GPIO0_ISR1L, in32(GPIO0_ISR1L) | 0x40000000);
+       /*setup Address lines for flash size 64Meg. */
+       out32(GPIO0_OSRL, in32(GPIO0_OSRL) | 0x50010000);
+       out32(GPIO0_TSRL, in32(GPIO0_TSRL) | 0x50010000);
+       out32(GPIO0_ISR1L, in32(GPIO0_ISR1L) | 0x50000000);
 
        /*setup emac */
        out32(GPIO0_TCR, in32(GPIO0_TCR) | 0xC080);
@@ -129,7 +129,7 @@ int board_early_init_f(void)
 #endif
 
        /*get rid of flash write protect */
-       *(unsigned char *)(CFG_BCSR_BASE | 0x07) = 0x40;
+       *(unsigned char *)(CFG_BCSR_BASE | 0x07) = 0x00;
 
        return 0;
 }
@@ -207,9 +207,85 @@ int checkboard(void)
  *              PLB @ 133 MHz
  *
  ************************************************************************/
+#define NUM_TRIES 64
+#define NUM_READS 10
+
+void sdram_tr1_set(int ram_address, int* tr1_value)
+{
+       int i;
+       int j, k;
+       volatile unsigned int* ram_pointer =  (unsigned int*)ram_address;
+       int first_good = -1, last_bad = 0x1ff;
+
+       unsigned long test[NUM_TRIES] = {
+               0x00000000, 0x00000000, 0xFFFFFFFF, 0xFFFFFFFF,
+               0x00000000, 0x00000000, 0xFFFFFFFF, 0xFFFFFFFF,
+               0xFFFFFFFF, 0xFFFFFFFF, 0x00000000, 0x00000000,
+               0xFFFFFFFF, 0xFFFFFFFF, 0x00000000, 0x00000000,
+               0xAAAAAAAA, 0xAAAAAAAA, 0x55555555, 0x55555555,
+               0xAAAAAAAA, 0xAAAAAAAA, 0x55555555, 0x55555555,
+               0x55555555, 0x55555555, 0xAAAAAAAA, 0xAAAAAAAA,
+               0x55555555, 0x55555555, 0xAAAAAAAA, 0xAAAAAAAA,
+               0xA5A5A5A5, 0xA5A5A5A5, 0x5A5A5A5A, 0x5A5A5A5A,
+               0xA5A5A5A5, 0xA5A5A5A5, 0x5A5A5A5A, 0x5A5A5A5A,
+               0x5A5A5A5A, 0x5A5A5A5A, 0xA5A5A5A5, 0xA5A5A5A5,
+               0x5A5A5A5A, 0x5A5A5A5A, 0xA5A5A5A5, 0xA5A5A5A5,
+               0xAA55AA55, 0xAA55AA55, 0x55AA55AA, 0x55AA55AA,
+               0xAA55AA55, 0xAA55AA55, 0x55AA55AA, 0x55AA55AA,
+               0x55AA55AA, 0x55AA55AA, 0xAA55AA55, 0xAA55AA55,
+               0x55AA55AA, 0x55AA55AA, 0xAA55AA55, 0xAA55AA55 };
+
+       /* go through all possible SDRAM0_TR1[RDCT] values */
+       for (i=0; i<=0x1ff; i++) {
+               /* set the current value for TR1 */
+               mtsdram(mem_tr1, (0x80800800 | i));
+
+               /* write values */
+               for (j=0; j<NUM_TRIES; j++) {
+                       ram_pointer[j] = test[j];
+
+                       /* clear any cache at ram location */
+                       __asm__("dcbf 0,%0": :"r" (&ram_pointer[j]));
+               }
+
+               /* read values back */
+               for (j=0; j<NUM_TRIES; j++) {
+                       for (k=0; k<NUM_READS; k++) {
+                               /* clear any cache at ram location */
+                               __asm__("dcbf 0,%0": :"r" (&ram_pointer[j]));
+
+                               if (ram_pointer[j] != test[j])
+                                       break;
+                       }
+
+                       /* read error */
+                       if (k != NUM_READS) {
+                               break;
+                       }
+               }
+
+               /* we have a SDRAM0_TR1[RDCT] that is part of the window */
+               if (j == NUM_TRIES) {
+                       if (first_good == -1)
+                               first_good = i;         /* found beginning of window */
+               } else { /* bad read */
+                       /* if we have not had a good read then don't care */
+                       if(first_good != -1) {
+                               /* first failure after a good read */
+                               last_bad = i-1;
+                               break;
+                       }
+               }
+       }
+
+       /* return the current value for TR1 */
+       *tr1_value = (first_good + last_bad) / 2;
+}
+
 void sdram_init(void)
 {
        register uint reg;
+       int tr1_bank1, tr1_bank2;
 
        /*--------------------------------------------------------------------
         * Setup some default
@@ -221,7 +297,7 @@ void sdram_init(void)
        mtsdram(mem_wddctr, 0x40000000);        /* ?? */
 
        /*clear this first, if the DDR is enabled by a debugger
-          then you can not make changes. */
+         then you can not make changes. */
        mtsdram(mem_cfg0, 0x00000000);  /* Disable EEC */
 
        /*--------------------------------------------------------------------
@@ -234,7 +310,6 @@ void sdram_init(void)
        mtsdram(mem_b1cr, 0x080a4001);  /* SDBA=0x080 128MB, Mode 3, enabled */
 
        mtsdram(mem_tr0, 0x410a4012);   /* ?? */
-       mtsdram(mem_tr1, 0x8080080b);   /* ?? */
        mtsdram(mem_rtr, 0x04080000);   /* ?? */
        mtsdram(mem_cfg1, 0x00000000);  /* Self-refresh exit, disable PM    */
        mtsdram(mem_cfg0, 0x34000000);  /* Disable EEC */
@@ -250,6 +325,10 @@ void sdram_init(void)
                if (reg & 0x80000000)
                        break;
        }
+
+       sdram_tr1_set(0x00000000, &tr1_bank1);
+       sdram_tr1_set(0x08000000, &tr1_bank2);
+       mtsdram(mem_tr1, (((tr1_bank1+tr1_bank2)/2) | 0x80800800) );
 }
 
 /*************************************************************************
index 66945171031b508ce5c05a1f2ea0c6f9dc03ff91..509d8e4cce422daa8c23f09dd2efe734a94f53da 100644 (file)
@@ -59,10 +59,10 @@ int board_early_init_f(void)
         * Setup the GPIO pins
         *-------------------------------------------------------------------*/
        /*CPLD cs */
-       /*setup Address lines for flash sizes larger than 16Meg. */
-       out32(GPIO0_OSRL, in32(GPIO0_OSRL) | 0x40010000);
-       out32(GPIO0_TSRL, in32(GPIO0_TSRL) | 0x40010000);
-       out32(GPIO0_ISR1L, in32(GPIO0_ISR1L) | 0x40000000);
+       /*setup Address lines for flash size 64Meg. */
+       out32(GPIO0_OSRL, in32(GPIO0_OSRL) | 0x50010000);
+       out32(GPIO0_TSRL, in32(GPIO0_TSRL) | 0x50010000);
+       out32(GPIO0_ISR1L, in32(GPIO0_ISR1L) | 0x50000000);
 
        /*setup emac */
        out32(GPIO0_TCR, in32(GPIO0_TCR) | 0xC080);
@@ -125,7 +125,7 @@ int board_early_init_f(void)
        *(unsigned char *)(CFG_BCSR_BASE | 0x09) = 0x00;
 
        /*get rid of flash write protect */
-       *(unsigned char *)(CFG_BCSR_BASE | 0x07) = 0x40;
+       *(unsigned char *)(CFG_BCSR_BASE | 0x07) = 0x00;
 
        return 0;
 }
@@ -203,9 +203,85 @@ int checkboard(void)
  *              PLB @ 133 MHz
  *
  ************************************************************************/
+#define NUM_TRIES 64
+#define NUM_READS 10
+
+void sdram_tr1_set(int ram_address, int* tr1_value)
+{
+       int i;
+       int j, k;
+       volatile unsigned int* ram_pointer =  (unsigned int*)ram_address;
+       int first_good = -1, last_bad = 0x1ff;
+
+       unsigned long test[NUM_TRIES] = {
+               0x00000000, 0x00000000, 0xFFFFFFFF, 0xFFFFFFFF,
+               0x00000000, 0x00000000, 0xFFFFFFFF, 0xFFFFFFFF,
+               0xFFFFFFFF, 0xFFFFFFFF, 0x00000000, 0x00000000,
+               0xFFFFFFFF, 0xFFFFFFFF, 0x00000000, 0x00000000,
+               0xAAAAAAAA, 0xAAAAAAAA, 0x55555555, 0x55555555,
+               0xAAAAAAAA, 0xAAAAAAAA, 0x55555555, 0x55555555,
+               0x55555555, 0x55555555, 0xAAAAAAAA, 0xAAAAAAAA,
+               0x55555555, 0x55555555, 0xAAAAAAAA, 0xAAAAAAAA,
+               0xA5A5A5A5, 0xA5A5A5A5, 0x5A5A5A5A, 0x5A5A5A5A,
+               0xA5A5A5A5, 0xA5A5A5A5, 0x5A5A5A5A, 0x5A5A5A5A,
+               0x5A5A5A5A, 0x5A5A5A5A, 0xA5A5A5A5, 0xA5A5A5A5,
+               0x5A5A5A5A, 0x5A5A5A5A, 0xA5A5A5A5, 0xA5A5A5A5,
+               0xAA55AA55, 0xAA55AA55, 0x55AA55AA, 0x55AA55AA,
+               0xAA55AA55, 0xAA55AA55, 0x55AA55AA, 0x55AA55AA,
+               0x55AA55AA, 0x55AA55AA, 0xAA55AA55, 0xAA55AA55,
+               0x55AA55AA, 0x55AA55AA, 0xAA55AA55, 0xAA55AA55 };
+
+       /* go through all possible SDRAM0_TR1[RDCT] values */
+       for (i=0; i<=0x1ff; i++) {
+               /* set the current value for TR1 */
+               mtsdram(mem_tr1, (0x80800800 | i));
+
+               /* write values */
+               for (j=0; j<NUM_TRIES; j++) {
+                       ram_pointer[j] = test[j];
+
+                       /* clear any cache at ram location */
+                       __asm__("dcbf 0,%0": :"r" (&ram_pointer[j]));
+               }
+
+               /* read values back */
+               for (j=0; j<NUM_TRIES; j++) {
+                       for (k=0; k<NUM_READS; k++) {
+                               /* clear any cache at ram location */
+                               __asm__("dcbf 0,%0": :"r" (&ram_pointer[j]));
+
+                               if (ram_pointer[j] != test[j])
+                                       break;
+                       }
+
+                       /* read error */
+                       if (k != NUM_READS) {
+                               break;
+                       }
+               }
+
+               /* we have a SDRAM0_TR1[RDCT] that is part of the window */
+               if (j == NUM_TRIES) {
+                       if (first_good == -1)
+                               first_good = i;         /* found beginning of window */
+               } else { /* bad read */
+                       /* if we have not had a good read then don't care */
+                       if(first_good != -1) {
+                               /* first failure after a good read */
+                               last_bad = i-1;
+                               break;
+                       }
+               }
+       }
+
+       /* return the current value for TR1 */
+       *tr1_value = (first_good + last_bad) / 2;
+}
+
 void sdram_init(void)
 {
        register uint reg;
+       int tr1_bank1, tr1_bank2;
 
        /*--------------------------------------------------------------------
         * Setup some default
@@ -217,7 +293,7 @@ void sdram_init(void)
        mtsdram(mem_wddctr, 0x40000000);        /* ?? */
 
        /*clear this first, if the DDR is enabled by a debugger
-          then you can not make changes. */
+         then you can not make changes. */
        mtsdram(mem_cfg0, 0x00000000);  /* Disable EEC */
 
        /*--------------------------------------------------------------------
@@ -230,7 +306,6 @@ void sdram_init(void)
        mtsdram(mem_b1cr, 0x080a4001);  /* SDBA=0x080 128MB, Mode 3, enabled */
 
        mtsdram(mem_tr0, 0x410a4012);   /* ?? */
-       mtsdram(mem_tr1, 0x8080080b);   /* ?? */
        mtsdram(mem_rtr, 0x04080000);   /* ?? */
        mtsdram(mem_cfg1, 0x00000000);  /* Self-refresh exit, disable PM    */
        mtsdram(mem_cfg0, 0x34000000);  /* Disable EEC */
@@ -246,6 +321,10 @@ void sdram_init(void)
                if (reg & 0x80000000)
                        break;
        }
+
+       sdram_tr1_set(0x00000000, &tr1_bank1);
+       sdram_tr1_set(0x08000000, &tr1_bank2);
+       mtsdram(mem_tr1, (((tr1_bank1+tr1_bank2)/2) | 0x80800800) );
 }
 
 /*************************************************************************