return uci_core.cursor(SYSROOT .. "/etc/config", SYSROOT .. "/var/state")
end
+uci_model.inst = uci_model.cursor()
+uci_model.inst_state = uci_model.cursor_state()
+
-- override uvl access
local uvl_model = require "luci.uvl"
local uvl_init = uvl_model.UVL.__init__
end
-- hook helper
+function Node._run_hook(self, hook)
+ if type(self[hook]) == "function" then
+ return self[hook](self)
+ end
+end
+
function Node._run_hooks(self, ...)
local f
local r = false
end
function Delegator.insert_after(self, name, after)
- local n = #self.chain
+ local n = #self.chain + 1
for k, v in ipairs(self.chain) do
- if v == state then
+ if v == after then
n = k + 1
break
end
return FORM_NODATA
elseif stat > FORM_PROCEED
and (not newcurrent or not self:get(newcurrent)) then
- self:_run_hooks("on_done")
- return FORM_DONE
+ return self:_run_hook("on_done") or FORM_DONE
else
self.current = newcurrent or self.current
self.active = self:get(self.current)
end
-local Cursor = getmetatable(cursor())
+inst = cursor()
+inst_state = cursor_state()
+
+local Cursor = getmetatable(inst)
--- Applies UCI configuration changes
-- @param configlist List of UCI configurations
module("luci.dispatcher", package.seeall)
context = util.threadlocal()
+uci = require "luci.model.uci"
authenticator = {}
local tpl = require "luci.template"
local utl = require "luci.util"
local uci = require "luci.model.uci"
- local str = require "luci.store"
- str.uci_state = str.uci_state or uci.cursor()
local nds = dsp.node("niu").nodes
tpl.render("niu/dashboard", {utl = utl, nodes = nds, dsp = dsp, tpl = tpl})
module "luci.controller.niu.network"
function index()
- entry({"niu", "network"}, nil, "Network").dbtemplate = "niu/network"
-
- entry({"niu", "network", "lan"},
- cbi("niu/network/lan", {on_success_to={"niu"}}), "Configure LAN", 10)
+ entry({"niu", "network"}, nil, "Network", 10).dbtemplate = "niu/network"
entry({"niu", "network", "wan"},
- cbi("niu/network/wan", {on_success_to={"niu"}}), "Configure Internet", 20)
+ cbi("niu/network/wan", {on_success_to={"niu"}}), "Configure Internet Connection", 10)
+
+ entry({"niu", "network", "lan"},
+ cbi("niu/network/lan", {on_success_to={"niu"}}), "Configure Local Network", 20)
- entry({"niu", "network", "assign"}, cbi("niu/network/assign",
- {on_success_to={"niu"}}), "Address Assignment", 30)
+ uci.inst_state:foreach("dhcp", "dhcp", function(s)
+ if s.interface == "lan" and s.ignore ~= "1" then
+ entry({"niu", "network", "assign"}, cbi("niu/network/assign",
+ {on_success_to={"niu"}}), "Assign local addresses", 30)
+ end
+ end)
entry({"niu", "network", "routes"}, cbi("niu/network/routes",
- {on_success_to={"niu"}}), "Custom Routing", 40)
+ {on_success_to={"niu"}}), "Assign custom routes", 40)
end
$Id$
]]--
-local require, pairs, unpack = require, pairs, unpack
+local require, pairs, unpack, tonumber = require, pairs, unpack, tonumber
module "luci.controller.niu.system"
function index()
- entry({"niu", "system"}, nil, "System").dbtemplate = "niu/system"
+ entry({"niu", "system"}, nil, "System", 20).dbtemplate = "niu/system"
entry({"niu", "system", "general"},
- cbi("niu/system/general", {on_success_to={"niu"}}), "General", 10)
+ cbi("niu/system/general", {on_success_to={"niu"}}), "Configure Device", 10)
- entry({"niu", "system", "backup"}, call("backup"), "Backup Settings", 20)
+ entry({"niu", "system", "backup"}, call("backup"), "Backup or Restore Settings", 20)
+ entry({"niu", "system", "upgrade"}, call("upgrade"), "Upgrade Firmware", 40)
end
function backup()
- local os = require "os"
- local uci = require "luci.model.uci".cursor()
+ local dsp = require "luci.dispatcher"
+ local os, io = require "os", require "io"
+ local uci = require "luci.model.uci".inst
local nixio, nutl = require "nixio", require "nixio.util"
local fs = require "nixio.fs"
local http = require "luci.http"
+ local tpl = require "luci.template"
-
- local call = {"/bin/tar", "-cz"}
- for k, v in pairs(uci:get_all("luci", "flash_keep")) do
- if k:byte() ~= 46 then -- k[1] ~= "."
- nutl.consume(fs.glob(v), call)
+ local restore_fpi
+ http.setfilehandler(
+ function(meta, chunk, eof)
+ if not restore_fpi then
+ restore_fpi = io.popen("tar -xzC/ >/dev/null 2>&1", "w")
+ end
+ if chunk then
+ restore_fpi:write(chunk)
+ end
+ if eof then
+ restore_fpi:close()
+ end
end
- end
+ )
+ local reset_avail = (fs.readfile("/proc/mtd") or ""):find('"rootfs_data"')
+ local upload = http.formvalue("archive")
+ local backup = http.formvalue("backup")
+ local reset = reset_avail and http.formvalue("reset")
+ local backup_cmd = "tar -cz %s 2>/dev/null"
- http.header(
- 'Content-Disposition', 'attachment; filename="backup-%s-%s.tar.gz"' % {
- nixio.uname().nodename, os.date("%Y-%m-%d")
- }
- )
- http.prepare_content("application/x-targz")
+ if http.formvalue("cancel") then
+ return http.redirect(dsp.build_url("niu"))
+ end
+ if backup then
+ local call = {"/bin/tar", "-cz"}
+ for k, v in pairs(uci:get_all("luci", "flash_keep")) do
+ if k:byte() ~= 46 then -- k[1] ~= "."
+ nutl.consume(fs.glob(v), call)
+ end
+ end
+
+
+ http.header(
+ 'Content-Disposition', 'attachment; filename="backup-%s-%s.tar.gz"' % {
+ nixio.uname().nodename, os.date("%Y-%m-%d")
+ }
+ )
+ http.prepare_content("application/x-targz")
+
+
+ local fdin, fdout = nixio.pipe()
+ local devnull = nixio.open("/dev/null", "r+")
+ local proc = nixio.fork()
+
+ if proc == 0 then
+ fdin:close()
+ nixio.dup(devnull, nixio.stdin)
+ nixio.dup(devnull, nixio.stderr)
+ nixio.dup(fdout, nixio.stdout)
+ nixio.exec(unpack(call))
+ os.exit(1)
+ end
+
+ fdout:close()
+ http.splice(fdin)
+ http.close()
+ elseif (upload and #upload > 0) or reset then
+ tpl.render("niu/system/reboot")
+ if nixio.fork() == 0 then
+ nixio.nanosleep(1)
+ if reset then
+ nixio.execp("mtd", "-r", "erase", "rootfs_data")
+ else
+ nixio.execp("reboot")
+ end
+ os.exit(1)
+ end
+ else
+ tpl.render("niu/system/backup", {reset_avail = reset_avail})
+ end
+end
+
+function upgrade()
+ local io, os, table = require "io", require "os", require "table"
+ local uci = require "luci.store".uci_state
+ local http = require "luci.http"
+ local util = require "luci.util"
+ local tpl = require "luci.template"
+ local nixio = require "nixio", require "nixio.util", require "nixio.fs"
+
+
+ local tmpfile = "/tmp/firmware.img"
+
+ local function image_supported()
+ -- XXX: yay...
+ return ( 0 == os.execute(
+ ". /etc/functions.sh; " ..
+ "include /lib/upgrade; " ..
+ "platform_check_image %q >/dev/null"
+ % tmpfile
+ ) )
+ end
- local fdin, fdout = nixio.pipe()
- local devnull = nixio.open("/dev/null", "r+")
- local proc = nixio.fork()
+ local function image_checksum()
+ return (util.exec("md5sum %q" % tmpfile):match("^([^%s]+)"))
+ end
- if proc == 0 then
- fdin:close()
- nixio.dup(devnull, nixio.stdin)
- nixio.dup(devnull, nixio.stderr)
- nixio.dup(fdout, nixio.stdout)
- nixio.exec(unpack(call))
- os.exit(1)
+ local function storage_size()
+ local size = 0
+ if nixio.fs.access("/proc/mtd") then
+ for l in io.lines("/proc/mtd") do
+ local d, s, e, n = l:match('^([^%s]+)%s+([^%s]+)%s+([^%s]+)%s+"([^%s]+)"')
+ if n == "linux" then
+ size = tonumber(s, 16)
+ break
+ end
+ end
+ elseif nixio.fs.access("/proc/partitions") then
+ for l in io.lines("/proc/partitions") do
+ local x, y, b, n = l:match('^%s*(%d+)%s+(%d+)%s+([^%s]+)%s+([^%s]+)')
+ if b and n and not n:match('[0-9]') then
+ size = tonumber(b) * 1024
+ break
+ end
+ end
+ end
+ return size
end
+
+
+ -- Install upload handler
+ local file
+ http.setfilehandler(
+ function(meta, chunk, eof)
+ if not nixio.fs.access(tmpfile) and not file and chunk and #chunk > 0 then
+ file = io.open(tmpfile, "w")
+ end
+ if file and chunk then
+ file:write(chunk)
+ end
+ if file and eof then
+ file:close()
+ end
+ end
+ )
+
+
+ -- Determine state
+ local keep_avail = true
+ local step = tonumber(http.formvalue("step") or 1)
+ local has_image = nixio.fs.access(tmpfile)
+ local has_support = image_supported()
+ local has_platform = nixio.fs.access("/lib/upgrade/platform.sh")
+ local has_upload = http.formvalue("image")
+
+ -- This does the actual flashing which is invoked inside an iframe
+ -- so don't produce meaningful errors here because the the
+ -- previous pages should arrange the stuff as required.
+ if step == 4 then
+ if has_platform and has_image and has_support then
+ -- Mimetype text/plain
+ http.prepare_content("text/plain")
+
+ local call = {}
+ for k, v in pairs(uci:get_all("luci", "flash_keep")) do
+ if k:byte() ~= 46 then -- k[1] ~= "."
+ nixio.util.consume(nixio.fs.glob(v), call)
+ end
+ end
+
+ -- Now invoke sysupgrade
+ local keepcfg = keep_avail and http.formvalue("keepcfg") == "1"
+ local fd = io.popen("/sbin/luci-flash %s %q" %{
+ keepcfg and "-k %q" % table.concat(call, " ") or "", tmpfile
+ })
+
+ if fd then
+ while true do
+ local ln = fd:read("*l")
+ if not ln then break end
+ http.write(ln .. "\n")
+ end
+ fd:close()
+ end
+
+ -- Make sure the device is rebooted
+ if nixio.fork() == 0 then
+ nixio.nanosleep(1)
+ nixio.execp("reboot")
+ os.exit(1)
+ end
+ end
+
+
+ --
+ -- This is step 1-3, which does the user interaction and
+ -- image upload.
+ --
+
+ -- Step 1: file upload, error on unsupported image format
+ elseif not has_image or not has_support or step == 1 then
+ -- If there is an image but user has requested step 1
+ -- or type is not supported, then remove it.
+ if has_image then
+ nixio.fs.unlink(tmpfile)
+ end
+
+ tpl.render("niu/system/upgrade", {
+ step=1,
+ bad_image=(has_image and not has_support or false),
+ keepavail=keep_avail,
+ supported=has_platform
+ } )
+
+ -- Step 2: present uploaded file, show checksum, confirmation
+ elseif step == 2 then
+ tpl.render("niu/system/upgrade", {
+ step=2,
+ checksum=image_checksum(),
+ filesize=nixio.fs.stat(tmpfile).size,
+ flashsize=storage_size(),
+ keepconfig=(keep_avail and http.formvalue("keepcfg") == "1")
+ } )
- fdout:close()
- http.splice(fdin)
- http.close()
+ -- Step 3: load iframe which calls the actual flash procedure
+ elseif step == 3 then
+ tpl.render("niu/system/upgrade", {
+ step=3,
+ keepconfig=(keep_avail and http.formvalue("keepcfg") == "1")
+ } )
+ end
end
\ No newline at end of file
-local cursor = require "luci.model.uci".cursor()
+local uci = require "luci.model.uci"
+local cursor = uci.cursor()
local d = Delegator()
d.allow_finish = true
d.allow_back = true
d.allow_cancel = true
d:add("lan1", load("niu/network/lan1"))
+d:set("warnip", {Template("niu/network/warn_ip_change")})
function d.on_cancel()
cursor:revert("network")
end
function d.on_done()
+ if uci.inst_state:get("network", "lan", "ipaddr") ~= cursor:get("network", "lan", "ipaddr") then
+ local cs = uci.cursor_state()
+ cs:set("network", "lan", "_ipchanged", "1")
+ cs:save("network")
+ end
+
cursor:commit("network")
cursor:commit("dhcp")
end
--- /dev/null
+local f = Form("reboot", "Rebooting Device", "Device is rebooting. Please wait...")
\ No newline at end of file
<%
local dsp = require "luci.dispatcher"
local utl = require "luci.util"
-local str = require "luci.store"
+local uci = require "luci.model.uci"
local nws = {}
-str.uci_state:foreach("network", "interface", function(s)
+uci.inst_state:foreach("network", "interface", function(s)
nws[#nws+1] = s
end)
+
+if uci.inst_state:get("network", "lan", "_ipchanged") and
+uci.inst_state:revert("network", "lan", "_ipchanged") then
+ include("niu/network/warn_ip_change")
+end
%>
+
<div>Status:</div>
<table>
<%
--- /dev/null
+<strong>Warning!<br />
+Device IP has changed.</strong>
\ No newline at end of file
--- /dev/null
+<%#
+LuCI - Lua Configuration Interface
+Copyright 2008 Steven Barth <steven@midlink.org>
+Copyright 2008 Jo-Philipp Wich <xm@leipzig.freifunk.net>
+
+Licensed under the Apache License, Version 2.0 (the "License");
+you may not use this file except in compliance with the License.
+You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+$Id$
+
+-%>
+<%+header%>
+<h2><a id="content" name="content"><%:System%></a></h2>
+<h3><%:Backup / Restore%></h3>
+<p><%:Here you can backup and restore your router configuration and - if possible - reset the router to the default settings.%></p>
+<br />
+<div>
+ <ul>
+ <li><a href="<%=REQUEST_URI%>?backup=kthxbye"><%:Create backup%></a></li>
+ <% if reset_avail then -%>
+ <li><a href="<%=REQUEST_URI%>?reset=yarly" onclick="return confirm('<%:Proceed reverting all settings and resetting to firmware defaults?%>')"><%:Reset router to defaults%></a></li>
+ <% end -%>
+ </ul>
+</div>
+
+<br />
+
+<form method="post" action="<%=REQUEST_URI%>" enctype="multipart/form-data">
+ <div class="left"><%:Backup Archive%>:</div>
+ <div>
+ <input type="file" size="30" name="archive" />
+ </div>
+ <div>
+ <input type="submit" name="cancel" class="cbi-input-cancel" value="<%:Cancel%>" />
+ <input type="submit" class="cbi-input-apply" value="<%:Restore backup%>" />
+ </div>
+</form>
+<%+footer%>
\ No newline at end of file
--- /dev/null
+Rebooting. Please wait...
+
+<script type="text/javascript">
+window.setInterval(function() {
+ var xmlHttp = new XMLHttpRequest();
+ xmlHttp.open('GET', '/', true);
+ xmlHttp.onreadystatechange = function () {
+ if (xmlHttp.readyState == 4 && req.status >= 200 && req.status < 400) {
+ window.location = "/";
+ }
+ };
+ xmlHttp.send(null);
+}, 10000);
+</script>
\ No newline at end of file
--- /dev/null
+<%#
+LuCI - Lua Configuration Interface
+Copyright 2008 Steven Barth <steven@midlink.org>
+Copyright 2008-2009 Jo-Philipp Wich <xm@subsignal.org>
+
+Licensed under the Apache License, Version 2.0 (the "License");
+you may not use this file except in compliance with the License.
+You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+$Id$
+
+-%>
+
+<%+header%>
+
+<h2><a id="content" name="content"><%:System%></a></h2>
+<h3><%:Flash Firmware%></h3>
+
+<% if step == 1 then %>
+ <% if supported then %>
+ <form method="post" action="<%=REQUEST_URI%>" enctype="multipart/form-data">
+ <p>
+ <%:Upload an OpenWrt image file to reflash the device.%>
+ <% if bad_image then %>
+ <br /><br />
+ <div class="error"><%:The uploaded image file does not
+ contain a supported format. Make sure that you choose the generic
+ image format for your platform. %></div>
+ <% end %>
+ </p>
+ <div>
+ <%:Firmware image%>:<br />
+ <input type="hidden" name="step" value="2" />
+ <input type="file" size="30" name="image" />
+ <br />
+ <br />
+ <% if keepavail then -%>
+ <input type="checkbox" name="keepcfg" value="1" checked="checked" />
+ <span class="bold"><%:Keep configuration files%></span>
+ <% end -%>
+
+ <br />
+ <input class="cbi-button cbi-button-apply" type="submit" value="<%:Upload image%>" />
+ </div>
+ </form>
+ <% else %>
+ <div class="error"><%_ Sorry.
+ OpenWrt does not support a system upgrade on this platform.<br />
+ You need to manually flash your device. %></div>
+ <% end %>
+<% elseif step == 2 then %>
+ <p>
+ <%_ The flash image was uploaded.
+ Below is the checksum and file size listed,
+ compare them with the original file to ensure data integrity.<br />
+ Click "Proceed" below to start the flash procedure. %>
+
+ <% if flashsize > 0 and filesize > flashsize then %>
+ <br /><br />
+ <div class="error"><%:It appears that you try to
+ flash an image that does not fit into the flash memory, please verify
+ the image file! %></div>
+ <% end %>
+
+ <br />
+ <ul>
+ <li><%:Checksum%>: <code><%=checksum%></code></li>
+ <li><%:Size%>: <%
+ local w = require "luci.tools.webadmin"
+ write(w.byte_format(filesize))
+
+ if flashsize > 0 then
+ write(luci.i18n.translatef(
+ " (%s available)",
+ w.byte_format(flashsize)
+ ))
+ end
+ %></li>
+ </ul>
+ </p>
+ <div class="cbi-page-actions right">
+ <form style="display:inline">
+ <input type="hidden" name="step" value="3" />
+ <input type="hidden" name="keepcfg" value="<%=keepconfig and "1" or "0"%>" />
+ <input class="cbi-button cbi-button-apply" type="submit" value="<%:Proceed%>" />
+ </form>
+ <form style="display:inline">
+ <input type="hidden" name="step" value="1" />
+ <input type="hidden" name="keepcfg" value="<%=keepconfig and "1" or "0"%>" />
+ <input class="cbi-button cbi-button-reset" type="submit" value="<%:Cancel%>" />
+ </form>
+ </div>
+<% elseif step == 3 then %>
+ <p><%_ The system is flashing now.<br />
+ DO NOT POWER OFF THE DEVICE!<br />
+ Wait a few minutes until you try to reconnect.
+ It might be necessary to renew the address of your computer to reach the device
+ again, depending on your settings. %></p>
+
+ <iframe src="<%=REQUEST_URI%>?step=4&keepcfg=<%=keepconfig and "1" or "0"%>" style="border:1px solid black; width:100%; height:150px"></iframe>
+<% end %>
+<%+footer%>
+
projects / oweals / luci.git / commitdiff