--- /dev/null
+#
+# For a description of the syntax of this configuration file,
+# see scripts/kbuild/config-language.txt.
+#
+
+mainmenu "BusyBox Configuration"
+
+config HAVE_DOT_CONFIG
+ bool
+ default y
+
+menu "General Configuration"
+
+choice
+ prompt "Buffer allocation policy"
+ default CONFIG_FEATURE_BUFFERS_USE_MALLOC
+ help
+ There are 3 ways BusyBox can handle buffer allocations:
+ - Use malloc. This costs code size for the call to xmalloc.
+ - Put them on stack. For some very small machines with limited stack
+ space, this can be deadly. For most folks, this works just fine.
+ - Put them in BSS. This works beautifully for computers with a real
+ MMU (and OS support), but wastes runtime RAM for uCLinux. This
+ behavior was the only one available for BusyBox versions 0.48 and
+ earlier.
+
+config CONFIG_FEATURE_BUFFERS_USE_MALLOC
+ bool "Allocate with Malloc"
+
+config CONFIG_FEATURE_BUFFERS_GO_ON_STACK
+ bool "Allocate on the Stack"
+
+config CONFIG_FEATURE_BUFFERS_GO_IN_BSS
+ bool "Allocate in the .bss section"
+
+endchoice
+
+config CONFIG_FEATURE_VERBOSE_USAGE
+ bool "Show verbose applet usage messages"
+ default n
+ help
+ All BusyBox applets will show more verbose help messages when
+ busybox is invoked with --help. This will add a lot of text to the
+ busybox binary. In the default configuration, this will add about
+ 13k, but it can add much more depending on your configuration.
+
+config CONFIG_FEATURE_INSTALLER
+ bool "Support --install [-s] to install applet links at runtime"
+ default n
+ help
+ Enable 'busybox --install [-s]' support. This will allow you to use
+ busybox at runtime to create hard links or symlinks for all the
+ applets that are compiled into busybox. This feature requires the
+ /proc filesystem.
+
+config CONFIG_LOCALE_SUPPORT
+ bool "Enable locale support (system needs locale for this to work)"
+ default n
+ help
+ Enable this if your system has locale support and you would like
+ busybox to support locale settings.
+
+config CONFIG_FEATURE_DEVFS
+ bool "Support for devfs"
+ default n
+ help
+ Enable if you want BusyBox to work with devfs.
+
+config CONFIG_FEATURE_DEVPTS
+ bool "Use the devpts filesystem for Unix98 PTYs"
+ default y if CONFIG_FEATURE_DEVFS
+ help
+ Enable if you want BusyBox to use Unix98 PTY support. If enabled,
+ busybox will use /dev/ptmx for the master side of the pseudoterminal
+ and /dev/pts/<number> for the slave side. Otherwise, BSD style
+ /dev/ttyp<number> will be used. To use this option, you should have
+ devpts or devfs mounted.
+
+config CONFIG_FEATURE_CLEAN_UP
+ bool "Clean up all memory before exiting (usually not needed)"
+ default n
+ help
+ As a size optimization, busybox by default does not cleanup memory
+ that is dynamically allocated or close files before exiting. This
+ saves space and is usually not needed since the OS will clean up for
+ us. Don't enable this unless you have a really good reason to clean
+ things up manually.
+
+config CONFIG_FEATURE_SUID
+ bool "Support for SUID/SGID handling"
+ default n
+ help
+ Support SUID and SGID binaries.
+
+config CONFIG_FEATURE_SUID_CONFIG
+ bool "Runtime SUID/SGID configuration via /etc/busybox.conf"
+ default n if CONFIG_FEATURE_SUID
+ depends on CONFIG_FEATURE_SUID
+ help
+ Allow the SUID / SGID state of an applet to be determined runtime by
+ checking /etc/busybox.conf. The format of this file is as follows:
+
+ <applet> = [Ssx-][Ssx-][x-] (<username>|<uid>).(<groupname>|<gid>)
+
+ An example might help:
+
+ [SUID]
+ su = ssx root.0 # applet su can be run by anyone and runs with euid=0/egid=0
+ su = ssx # exactly the same
+
+ mount = sx- root.disk # applet mount can be run by root and members of group disk
+ # and runs with euid=0
+
+ cp = --- # disable applet cp for everyone
+
+ The file has to be owned by user root, group root and has to be
+ writeable only by root:
+ (chown 0.0 /etc/busybox.conf; chmod 600 /etc/busybox.conf)
+ The busybox executable has to be owned by user root, group
+ root and has to be setuid root for this to work:
+ (chown 0.0 /bin/busybox; chmod 4755 /bin/busybox)
+
+ Robert 'sandman' Griebl has more information here:
+ <url: http://www.softforge.de/bb/suid.html >.
+
+config CONFIG_FEATURE_SUID_CONFIG_QUIET
+ bool "Suppress warning message if /etc/busybox.conf is not readable"
+ default n
+ depends on CONFIG_FEATURE_SUID_CONFIG
+ help
+ /etc/busybox.conf should be readable by the user needing the SUID, check
+ this option to avoid users to be notified about missing permissions.
+
+config CONFIG_SELINUX
+ bool "Support NSA Security Enhanced Linux"
+ default n
+ help
+ Enable support for SE Linux in applets ls, ps, and id. Also provide
+ the option of compiling in SE Linux applets.
+
+ If you do not have a complete SE Linux Full Userland installed, this
+ stuff will not compile. Go visit
+ http://www.nsa.gov/selinux/index.html
+ to download the necessary stuff to allow busybox to compile with this
+ option enabled.
+
+ Most people will leave this set to 'N'.
+
+endmenu
+
+menu 'Build Options'
+
+config CONFIG_STATIC
+ bool "Build BusyBox as a static binary (no shared libs)"
+ default n
+ help
+ If you want to build a static BusyBox binary, which does not
+ use or require any shared libraries, then enable this option.
+ This can cause BusyBox to be considerably larger, so you should
+ leave this option false unless you have a good reason (i.e.
+ your target platform does not support shared libraries, or
+ you are building an initrd which doesn't need anything but
+ BusyBox, etc).
+
+ Most people will leave this set to 'N'.
+
+config CONFIG_LFS
+ bool "Build with Large File Support (for accessing files > 2 GB)"
+ default n
+ select FDISK_SUPPORT_LARGE_DISKS
+ help
+ If you want to build BusyBox with large file support, then enable
+ this option. This will have no effect if your kernel or your C
+ library lacks large file support for large files. Some of the
+ programs that can benefit from large file support include dd, gzip,
+ cp, mount, tar, and many others. If you want to access files larger
+ than 2 Gigabytes, enable this option. Otherwise, leave it set to 'N'.
+
+config USING_CROSS_COMPILER
+ bool "Do you want to build BusyBox with a Cross Compiler?"
+ default n
+ help
+ Do you want to build BusyBox with a Cross Compiler? If so,
+ then enable this option. Otherwise leave it set to 'N'.
+
+config CROSS_COMPILER_PREFIX
+ string "Cross Compiler prefix"
+ default "/usr/i386-linux-uclibc/bin/i386-uclibc-"
+ depends on USING_CROSS_COMPILER
+ help
+ If you want to build BusyBox with a cross compiler, then you
+ will need to set this to the cross-compiler prefix. For example,
+ if my cross-compiler is /usr/i386-linux-uclibc/bin/i386-uclibc-gcc
+ then I would enter '/usr/i386-linux-uclibc/bin/i386-uclibc-' here,
+ which will ensure the correct compiler is used.
+
+config EXTRA_CFLAGS_OPTIONS
+ string "Any extra CFLAGS options for the compiler?"
+ default ""
+ help
+ Do you want to pass any extra CFLAGS options to the compiler as
+ you build BusyBox? If so, this is the option for you... For example,
+ if you want to add some simple compiler switches (like -march=i686),
+ or check for warnings using -Werror, just those options here.
+
+config CONFIG_FEATURE_SUSv2
+ bool "Enable features that are in SuSv2 but not SuSv3?"
+ default y
+ help
+ This option will enable backwards compatability with SuSv2,
+ specifically, numeric options such as 'head -1 <file>' will be
+ supported.
+
+config CONFIG_FEATURE_SUSv2_OBSOLETE
+ bool "Enable features that are obsolete in SuSv2"
+ depends on CONFIG_FEATURE_SUSv2
+ default y
+ help
+ Disables support for numeric arguments in fold.
+
+endmenu
+
+menu 'Installation Options'
+
+config CONFIG_INSTALL_NO_USR
+ bool "Don't use /usr"
+ default n
+ help
+ Disable use of /usr. Don't activate this option if you don't know
+ that you really want this behaviour.
+
+choice
+ prompt "Applets links"
+ default CONFIG_INSTALL_APPLET_SYMLINKS
+ help
+ Choose how you install applets links.
+
+config CONFIG_INSTALL_APPLET_SYMLINKS
+ bool "as soft-links"
+ help
+ Install applets as soft-links to the busybox binary. This needs some
+ free inodes on the filesystem, but might help with filesystem
+ generators that can't cope with hard-links.
+
+config CONFIG_INSTALL_APPLET_HARDLINKS
+ bool "as hard-links"
+ help
+ Install applets as hard-links to the busybox binary. This might count
+ on a filesystem with few inodes.
+
+config CONFIG_INSTALL_APPLET_DONT
+ bool
+ prompt "not installed"
+ depends on CONFIG_FEATURE_INSTALLER || CONFIG_FEATURE_SH_STANDALONE_SHELL
+ help
+ Do not install applets links. Usefull when using the -install feature
+ or a standalone shell for rescue pruposes.
+
+endchoice
+
+config PREFIX
+ string "BusyBox installation prefix"
+ default "./_install"
+ help
+ Define your directory to install BusyBox files/subdirs in.
+
+
+
+endmenu
+
+source archival/Config.in
+source coreutils/Config.in
+source console-tools/Config.in
+source debianutils/Config.in
+source e2fsprogs/Config.in
+source editors/Config.in
+source findutils/Config.in
+source init/Config.in
+source loginutils/Config.in
+source miscutils/Config.in
+source modutils/Config.in
+source networking/Config.in
+source procps/Config.in
+source shell/Config.in
+source sysklogd/Config.in
+source util-linux/Config.in
+
+menu 'Debugging Options'
+
+config CONFIG_DEBUG
+ bool "Build BusyBox with Debugging symbols"
+ default n
+ help
+ Say Y here if you wish to compile BusyBox with debugging symbols.
+ This will allow you to use a debugger to examine BusyBox internals
+ while applets are running. This increases the size of the binary
+ considerably and should only be used when doing development.
+ If you are doing development and want to debug BusyBox, answer Y.
+
+ Most people should answer N.
+
+choice
+ prompt "Additional debugging library"
+ default CONFIG_NO_DEBUG_LIB
+ depends on CONFIG_DEBUG
+ help
+ Using an additional debugging library will make BusyBox become
+ considerable larger and will cause it to run more slowly. You
+ should always leave this option disabled for production use.
+
+ dmalloc support:
+ ----------------
+ This enables compiling with dmalloc ( http://dmalloc.com/ )
+ which is an excellent public domain mem leak and malloc problem
+ detector. To enable dmalloc, before running busybox you will
+ want to properly set your environment, for example:
+ export DMALLOC_OPTIONS=debug=0x34f47d83,inter=100,log=logfile
+ The 'debug=' value is generated using the following command
+ dmalloc -p log-stats -p log-non-free -p log-bad-space -p log-elapsed-time \
+ -p check-fence -p check-heap -p check-lists -p check-blank \
+ -p check-funcs -p realloc-copy -p allow-free-null
+
+ Electric-fence support:
+ -----------------------
+ This enables compiling with Electric-fence support. Electric
+ fence is another very useful malloc debugging library which uses
+ your computer's virtual memory hardware to detect illegal memory
+ accesses. This support will make BusyBox be considerable larger
+ and run slower, so you should leave this option disabled unless
+ you are hunting a hard to find memory problem.
+
+
+config CONFIG_NO_DEBUG_LIB
+ bool "None"
+
+config CONFIG_DMALLOC
+ bool "Dmalloc"
+
+config CONFIG_EFENCE
+ bool "Electric-fence"
+
+endchoice
+
+
+endmenu
.PHONY: _all
_all:
-CONFIG_CONFIG_IN = $(top_srcdir)/sysdeps/$(TARGET_OS)/Config.in
-CONFIG_DEFCONFIG = $(top_srcdir)/sysdeps/$(TARGET_OS)/defconfig
+CONFIG_CONFIG_IN = $(top_srcdir)/Config.in
+CONFIG_DEFCONFIG = $(top_srcdir)/defconfig
ifeq ($(KBUILD_SRC),)
--- /dev/null
+#
+# Automatically generated make config: don't edit
+#
+HAVE_DOT_CONFIG=y
+
+#
+# General Configuration
+#
+# CONFIG_FEATURE_BUFFERS_USE_MALLOC is not set
+CONFIG_FEATURE_BUFFERS_GO_ON_STACK=y
+# CONFIG_FEATURE_BUFFERS_GO_IN_BSS is not set
+CONFIG_FEATURE_VERBOSE_USAGE=y
+# CONFIG_FEATURE_INSTALLER is not set
+# CONFIG_LOCALE_SUPPORT is not set
+# CONFIG_FEATURE_DEVFS is not set
+CONFIG_FEATURE_DEVPTS=y
+# CONFIG_FEATURE_CLEAN_UP is not set
+# CONFIG_FEATURE_SUID is not set
+# CONFIG_SELINUX is not set
+
+#
+# Build Options
+#
+# CONFIG_STATIC is not set
+# CONFIG_LFS is not set
+# USING_CROSS_COMPILER is not set
+EXTRA_CFLAGS_OPTIONS=""
+
+#
+# Installation Options
+#
+# CONFIG_INSTALL_NO_USR is not set
+PREFIX="./_install"
+
+#
+# Archival Utilities
+#
+# CONFIG_AR is not set
+CONFIG_BUNZIP2=y
+# CONFIG_CPIO is not set
+# CONFIG_DPKG is not set
+# CONFIG_DPKG_DEB is not set
+CONFIG_GUNZIP=y
+# CONFIG_FEATURE_GUNZIP_UNCOMPRESS is not set
+CONFIG_GZIP=y
+# CONFIG_RPM2CPIO is not set
+# CONFIG_RPM is not set
+CONFIG_TAR=y
+CONFIG_FEATURE_TAR_CREATE=y
+CONFIG_FEATURE_TAR_BZIP2=y
+# CONFIG_FEATURE_TAR_FROM is not set
+CONFIG_FEATURE_TAR_GZIP=y
+# CONFIG_FEATURE_TAR_COMPRESS is not set
+CONFIG_FEATURE_TAR_OLDGNU_COMPATABILITY=y
+CONFIG_FEATURE_TAR_GNU_EXTENSIONS=y
+# CONFIG_FEATURE_TAR_LONG_OPTIONS is not set
+# CONFIG_UNCOMPRESS is not set
+CONFIG_UNZIP=y
+
+#
+# Common options for cpio and tar
+#
+# CONFIG_FEATURE_UNARCHIVE_TAPE is not set
+
+#
+# Coreutils
+#
+CONFIG_BASENAME=y
+# CONFIG_CAL is not set
+CONFIG_CAT=y
+CONFIG_CHGRP=y
+CONFIG_CHMOD=y
+CONFIG_CHOWN=y
+CONFIG_CHROOT=y
+CONFIG_CMP=y
+CONFIG_CP=y
+CONFIG_CUT=y
+CONFIG_DATE=y
+CONFIG_FEATURE_DATE_ISOFMT=y
+CONFIG_DD=y
+CONFIG_DF=y
+CONFIG_DIRNAME=y
+# CONFIG_DOS2UNIX is not set
+CONFIG_DU=y
+CONFIG_FEATURE_DU_DEFALT_BLOCKSIZE_1K=y
+CONFIG_ECHO=y
+CONFIG_FEATURE_FANCY_ECHO=y
+CONFIG_ENV=y
+CONFIG_EXPR=y
+CONFIG_FALSE=y
+# CONFIG_FOLD is not set
+CONFIG_HEAD=y
+# CONFIG_FEATURE_FANCY_HEAD is not set
+# CONFIG_HOSTID is not set
+CONFIG_ID=y
+CONFIG_INSTALL=y
+# CONFIG_LENGTH is not set
+CONFIG_LN=y
+# CONFIG_LOGNAME is not set
+CONFIG_LS=y
+CONFIG_FEATURE_LS_FILETYPES=y
+CONFIG_FEATURE_LS_FOLLOWLINKS=y
+CONFIG_FEATURE_LS_RECURSIVE=y
+CONFIG_FEATURE_LS_SORTFILES=y
+CONFIG_FEATURE_LS_TIMESTAMPS=y
+CONFIG_FEATURE_LS_USERNAME=y
+CONFIG_FEATURE_LS_COLOR=y
+# CONFIG_MD5SUM is not set
+CONFIG_MKDIR=y
+# CONFIG_MKFIFO is not set
+CONFIG_MKNOD=y
+CONFIG_MV=y
+# CONFIG_OD is not set
+# CONFIG_PRINTF is not set
+CONFIG_PWD=y
+# CONFIG_REALPATH is not set
+CONFIG_RM=y
+CONFIG_RMDIR=y
+# CONFIG_SEQ is not set
+# CONFIG_SHA1SUM is not set
+CONFIG_SLEEP=y
+# CONFIG_FEATURE_FANCY_SLEEP is not set
+CONFIG_SORT=y
+CONFIG_FEATURE_SORT_BIG=y
+# CONFIG_STTY is not set
+CONFIG_SYNC=y
+CONFIG_TAIL=y
+CONFIG_FEATURE_FANCY_TAIL=y
+CONFIG_TEE=y
+CONFIG_FEATURE_TEE_USE_BLOCK_IO=y
+CONFIG_TEST=y
+
+#
+# test (forced enabled for use with shell)
+#
+CONFIG_TOUCH=y
+CONFIG_TR=y
+CONFIG_TRUE=y
+CONFIG_TTY=y
+CONFIG_UNAME=y
+CONFIG_UNIQ=y
+CONFIG_USLEEP=y
+# CONFIG_UUDECODE is not set
+# CONFIG_UUENCODE is not set
+# CONFIG_WATCH is not set
+CONFIG_WC=y
+# CONFIG_WHO is not set
+CONFIG_WHOAMI=y
+CONFIG_YES=y
+
+#
+# Common options for cp and mv
+#
+CONFIG_FEATURE_PRESERVE_HARDLINKS=y
+
+#
+# Common options for ls and more
+#
+CONFIG_FEATURE_AUTOWIDTH=y
+
+#
+# Common options for df, du, ls
+#
+CONFIG_FEATURE_HUMAN_READABLE=y
+
+#
+# Console Utilities
+#
+CONFIG_CHVT=y
+CONFIG_CLEAR=y
+CONFIG_DEALLOCVT=y
+# CONFIG_DUMPKMAP is not set
+# CONFIG_LOADFONT is not set
+# CONFIG_LOADKMAP is not set
+CONFIG_OPENVT=y
+CONFIG_RESET=y
+# CONFIG_SETKEYCODES is not set
+
+#
+# Debian Utilities
+#
+CONFIG_MKTEMP=y
+# CONFIG_PIPE_PROGRESS is not set
+CONFIG_READLINK=y
+# CONFIG_RUN_PARTS is not set
+# CONFIG_START_STOP_DAEMON is not set
+CONFIG_WHICH=y
+
+#
+# Editors
+#
+# CONFIG_AWK is not set
+# CONFIG_PATCH is not set
+CONFIG_SED=y
+CONFIG_VI=y
+CONFIG_FEATURE_VI_COLON=y
+CONFIG_FEATURE_VI_YANKMARK=y
+CONFIG_FEATURE_VI_SEARCH=y
+CONFIG_FEATURE_VI_USE_SIGNALS=y
+CONFIG_FEATURE_VI_DOT_CMD=y
+CONFIG_FEATURE_VI_READONLY=y
+CONFIG_FEATURE_VI_SETOPTS=y
+CONFIG_FEATURE_VI_SET=y
+CONFIG_FEATURE_VI_WIN_RESIZE=y
+CONFIG_FEATURE_VI_OPTIMIZE_CURSOR=y
+
+#
+# Finding Utilities
+#
+CONFIG_FIND=y
+CONFIG_FEATURE_FIND_MTIME=y
+CONFIG_FEATURE_FIND_PERM=y
+CONFIG_FEATURE_FIND_TYPE=y
+CONFIG_FEATURE_FIND_XDEV=y
+# CONFIG_FEATURE_FIND_NEWER is not set
+# CONFIG_FEATURE_FIND_INUM is not set
+CONFIG_GREP=y
+CONFIG_FEATURE_GREP_EGREP_ALIAS=y
+CONFIG_FEATURE_GREP_FGREP_ALIAS=y
+CONFIG_FEATURE_GREP_CONTEXT=y
+CONFIG_XARGS=y
+# CONFIG_FEATURE_XARGS_SUPPORT_CONFIRMATION is not set
+CONFIG_FEATURE_XARGS_SUPPORT_QUOTES=y
+CONFIG_FEATURE_XARGS_SUPPORT_TERMOPT=y
+CONFIG_FEATURE_XARGS_SUPPORT_ZERO_TERM=y
+
+#
+# Init Utilities
+#
+CONFIG_INIT=y
+CONFIG_FEATURE_USE_INITTAB=y
+CONFIG_FEATURE_INITRD=y
+# CONFIG_FEATURE_INIT_COREDUMPS is not set
+CONFIG_FEATURE_EXTRA_QUIET=y
+CONFIG_HALT=y
+CONFIG_POWEROFF=y
+CONFIG_REBOOT=y
+# CONFIG_MESG is not set
+
+#
+# Login/Password Management Utilities
+#
+# CONFIG_USE_BB_PWD_GRP is not set
+# CONFIG_ADDGROUP is not set
+# CONFIG_DELGROUP is not set
+# CONFIG_ADDUSER is not set
+# CONFIG_DELUSER is not set
+# CONFIG_GETTY is not set
+# CONFIG_LOGIN is not set
+# CONFIG_PASSWD is not set
+# CONFIG_SU is not set
+# CONFIG_SULOGIN is not set
+# CONFIG_VLOCK is not set
+
+#
+# Miscellaneous Utilities
+#
+# CONFIG_ADJTIMEX is not set
+# CONFIG_CROND is not set
+# CONFIG_CRONTAB is not set
+# CONFIG_DC is not set
+# CONFIG_DEVFSD is not set
+# CONFIG_LAST is not set
+# CONFIG_HDPARM is not set
+# CONFIG_MAKEDEVS is not set
+# CONFIG_MT is not set
+# CONFIG_RX is not set
+CONFIG_STRINGS=y
+CONFIG_TIME=y
+# CONFIG_WATCHDOG is not set
+
+#
+# Linux Module Utilities
+#
+# CONFIG_INSMOD is not set
+# CONFIG_LSMOD is not set
+# CONFIG_MODPROBE is not set
+# CONFIG_RMMOD is not set
+
+#
+# Networking Utilities
+#
+# CONFIG_FEATURE_IPV6 is not set
+# CONFIG_ARPING is not set
+# CONFIG_FTPGET is not set
+# CONFIG_FTPPUT is not set
+CONFIG_HOSTNAME=y
+# CONFIG_HTTPD is not set
+CONFIG_IFCONFIG=y
+CONFIG_FEATURE_IFCONFIG_STATUS=y
+# CONFIG_FEATURE_IFCONFIG_SLIP is not set
+# CONFIG_FEATURE_IFCONFIG_MEMSTART_IOADDR_IRQ is not set
+# CONFIG_FEATURE_IFCONFIG_HW is not set
+# CONFIG_FEATURE_IFCONFIG_BROADCAST_PLUS is not set
+# CONFIG_IFUPDOWN is not set
+# CONFIG_INETD is not set
+# CONFIG_IP is not set
+# CONFIG_IPCALC is not set
+# CONFIG_IPADDR is not set
+# CONFIG_IPLINK is not set
+# CONFIG_IPROUTE is not set
+# CONFIG_IPTUNNEL is not set
+# CONFIG_NAMEIF is not set
+# CONFIG_NC is not set
+# CONFIG_NETSTAT is not set
+# CONFIG_NSLOOKUP is not set
+CONFIG_PING=y
+CONFIG_FEATURE_FANCY_PING=y
+CONFIG_ROUTE=y
+# CONFIG_TELNET is not set
+# CONFIG_TELNETD is not set
+# CONFIG_TFTP is not set
+# CONFIG_TRACEROUTE is not set
+# CONFIG_VCONFIG is not set
+CONFIG_WGET=y
+CONFIG_FEATURE_WGET_STATUSBAR=y
+CONFIG_FEATURE_WGET_AUTHENTICATION=y
+# CONFIG_FEATURE_WGET_IP6_LITERAL is not set
+
+#
+# udhcp Server/Client
+#
+# CONFIG_UDHCPD is not set
+# CONFIG_UDHCPC is not set
+
+#
+# Process Utilities
+#
+CONFIG_FREE=y
+CONFIG_KILL=y
+CONFIG_KILLALL=y
+CONFIG_PIDOF=y
+CONFIG_PS=y
+# CONFIG_RENICE is not set
+# CONFIG_TOP is not set
+CONFIG_UPTIME=y
+# CONFIG_BB_SYSCTL is not set
+
+#
+# Another Bourne-like Shell
+#
+CONFIG_FEATURE_SH_IS_ASH=y
+# CONFIG_FEATURE_SH_IS_HUSH is not set
+# CONFIG_FEATURE_SH_IS_LASH is not set
+# CONFIG_FEATURE_SH_IS_MSH is not set
+# CONFIG_FEATURE_SH_IS_NONE is not set
+CONFIG_ASH=y
+
+#
+# Ash Shell Options
+#
+CONFIG_ASH_JOB_CONTROL=y
+CONFIG_ASH_ALIAS=y
+CONFIG_ASH_MATH_SUPPORT=y
+CONFIG_ASH_MATH_SUPPORT_64=y
+# CONFIG_ASH_GETOPTS is not set
+# CONFIG_ASH_CMDCMD is not set
+# CONFIG_ASH_MAIL is not set
+CONFIG_ASH_OPTIMIZE_FOR_SIZE=y
+# CONFIG_ASH_RANDOM_SUPPORT is not set
+# CONFIG_HUSH is not set
+# CONFIG_LASH is not set
+# CONFIG_MSH is not set
+
+#
+# Bourne Shell Options
+#
+# CONFIG_FEATURE_SH_EXTRA_QUIET is not set
+# CONFIG_FEATURE_SH_STANDALONE_SHELL is not set
+CONFIG_FEATURE_COMMAND_EDITING=y
+CONFIG_FEATURE_COMMAND_HISTORY=15
+CONFIG_FEATURE_COMMAND_SAVEHISTORY=y
+CONFIG_FEATURE_COMMAND_TAB_COMPLETION=y
+# CONFIG_FEATURE_COMMAND_USERNAME_COMPLETION is not set
+CONFIG_FEATURE_SH_FANCY_PROMPT=y
+
+#
+# System Logging Utilities
+#
+CONFIG_SYSLOGD=y
+CONFIG_FEATURE_ROTATE_LOGFILE=y
+# CONFIG_FEATURE_REMOTE_LOG is not set
+# CONFIG_FEATURE_IPC_SYSLOG is not set
+CONFIG_KLOGD=y
+CONFIG_LOGGER=y
+
+#
+# Linux System Utilities
+#
+CONFIG_DMESG=y
+# CONFIG_FBSET is not set
+# CONFIG_FDFLUSH is not set
+# CONFIG_FDFORMAT is not set
+# CONFIG_FDISK is not set
+# CONFIG_FREERAMDISK is not set
+# CONFIG_FSCK_MINIX is not set
+# CONFIG_MKFS_MINIX is not set
+# CONFIG_GETOPT is not set
+CONFIG_HEXDUMP=y
+# CONFIG_HWCLOCK is not set
+# CONFIG_IPCRM is not set
+# CONFIG_IPCS is not set
+# CONFIG_LOSETUP is not set
+# CONFIG_MKSWAP is not set
+CONFIG_MORE=y
+CONFIG_FEATURE_USE_TERMIOS=y
+CONFIG_PIVOT_ROOT=y
+# CONFIG_RDATE is not set
+CONFIG_SWAPONOFF=y
+CONFIG_MOUNT=y
+# CONFIG_FEATURE_MOUNT_NFS is not set
+CONFIG_UMOUNT=y
+
+#
+# Common options for mount/umount
+#
+CONFIG_FEATURE_MOUNT_LOOP=y
+# CONFIG_FEATURE_MTAB_SUPPORT is not set
+
+#
+# Debugging Options
+#
+# CONFIG_DEBUG is not set
const char conf_def_filename[] = ".config";
-const char conf_defname[] = "sysdeps/linux/defconfig";
+const char conf_defname[] = "defconfig";
const char *conf_confnames[] = {
".config",
+++ /dev/null
-#
-# For a description of the syntax of this configuration file,
-# see scripts/kbuild/config-language.txt.
-#
-
-mainmenu "BusyBox Configuration"
-
-config HAVE_DOT_CONFIG
- bool
- default y
-
-config MODULES
- bool
- default y
-
-menu "General Configuration"
-
-choice
- prompt "Buffer allocation policy"
- default CONFIG_FEATURE_BUFFERS_USE_MALLOC
- help
- There are 3 ways BusyBox can handle buffer allocations:
- - Use malloc. This costs code size for the call to xmalloc.
- - Put them on stack. For some very small machines with limited stack
- space, this can be deadly. For most folks, this works just fine.
- - Put them in BSS. This works beautifully for computers with a real
- MMU (and OS support), but wastes runtime RAM for uCLinux. This
- behavior was the only one available for BusyBox versions 0.48 and
- earlier.
-
-config CONFIG_FEATURE_BUFFERS_USE_MALLOC
- bool "Allocate with Malloc"
-
-config CONFIG_FEATURE_BUFFERS_GO_ON_STACK
- bool "Allocate on the Stack"
-
-config CONFIG_FEATURE_BUFFERS_GO_IN_BSS
- bool "Allocate in the .bss section"
-
-endchoice
-
-config CONFIG_FEATURE_VERBOSE_USAGE
- bool "Show verbose applet usage messages"
- default n
- help
- All BusyBox applets will show more verbose help messages when
- busybox is invoked with --help. This will add a lot of text to the
- busybox binary. In the default configuration, this will add about
- 13k, but it can add much more depending on your configuration.
-
-config CONFIG_FEATURE_INSTALLER
- bool "Support --install [-s] to install applet links at runtime"
- default n
- help
- Enable 'busybox --install [-s]' support. This will allow you to use
- busybox at runtime to create hard links or symlinks for all the
- applets that are compiled into busybox. This feature requires the
- /proc filesystem.
-
-config CONFIG_LOCALE_SUPPORT
- bool "Enable locale support (system needs locale for this to work)"
- default n
- help
- Enable this if your system has locale support and you would like
- busybox to support locale settings.
-
-config CONFIG_FEATURE_DEVFS
- bool "Support for devfs"
- default n
- help
- Enable if you want BusyBox to work with devfs.
-
-config CONFIG_FEATURE_DEVPTS
- bool "Use the devpts filesystem for Unix98 PTYs"
- default y if CONFIG_FEATURE_DEVFS
- help
- Enable if you want BusyBox to use Unix98 PTY support. If enabled,
- busybox will use /dev/ptmx for the master side of the pseudoterminal
- and /dev/pts/<number> for the slave side. Otherwise, BSD style
- /dev/ttyp<number> will be used. To use this option, you should have
- devpts or devfs mounted.
-
-config CONFIG_FEATURE_CLEAN_UP
- bool "Clean up all memory before exiting (usually not needed)"
- default n
- help
- As a size optimization, busybox by default does not cleanup memory
- that is dynamically allocated or close files before exiting. This
- saves space and is usually not needed since the OS will clean up for
- us. Don't enable this unless you have a really good reason to clean
- things up manually.
-
-config CONFIG_FEATURE_SUID
- bool "Support for SUID/SGID handling"
- default n
- help
- Support SUID and SGID binaries.
-
-config CONFIG_FEATURE_SUID_CONFIG
- bool "Runtime SUID/SGID configuration via /etc/busybox.conf"
- default n if CONFIG_FEATURE_SUID
- depends on CONFIG_FEATURE_SUID
- help
- Allow the SUID / SGID state of an applet to be determined runtime by
- checking /etc/busybox.conf. The format of this file is as follows:
-
- <applet> = [Ssx-][Ssx-][x-] (<username>|<uid>).(<groupname>|<gid>)
-
- An example might help:
-
- [SUID]
- su = ssx root.0 # applet su can be run by anyone and runs with euid=0/egid=0
- su = ssx # exactly the same
-
- mount = sx- root.disk # applet mount can be run by root and members of group disk
- # and runs with euid=0
-
- cp = --- # disable applet cp for everyone
-
- The file has to be owned by user root, group root and has to be
- writeable only by root:
- (chown 0.0 /etc/busybox.conf; chmod 600 /etc/busybox.conf)
- The busybox executable has to be owned by user root, group
- root and has to be setuid root for this to work:
- (chown 0.0 /bin/busybox; chmod 4755 /bin/busybox)
-
- Robert 'sandman' Griebl has more information here:
- <url: http://www.softforge.de/bb/suid.html >.
-
-config CONFIG_FEATURE_SUID_CONFIG_QUIET
- bool "Suppress warning message if /etc/busybox.conf is not readable"
- default n
- depends on CONFIG_FEATURE_SUID_CONFIG
- help
- /etc/busybox.conf should be readable by the user needing the SUID, check
- this option to avoid users to be notified about missing permissions.
-
-config CONFIG_SELINUX
- bool "Support NSA Security Enhanced Linux"
- default n
- help
- Enable support for SE Linux in applets ls, ps, and id. Also provide
- the option of compiling in SE Linux applets.
-
- If you do not have a complete SE Linux Full Userland installed, this
- stuff will not compile. Go visit
- http://www.nsa.gov/selinux/index.html
- to download the necessary stuff to allow busybox to compile with this
- option enabled.
-
- Most people will leave this set to 'N'.
-
-endmenu
-
-menu 'Build Options'
-
-config CONFIG_STATIC
- bool "Build BusyBox as a static binary (no shared libs)"
- default n
- help
- If you want to build a static BusyBox binary, which does not
- use or require any shared libraries, then enable this option.
- This can cause BusyBox to be considerably larger, so you should
- leave this option false unless you have a good reason (i.e.
- your target platform does not support shared libraries, or
- you are building an initrd which doesn't need anything but
- BusyBox, etc).
-
- Most people will leave this set to 'N'.
-
-config CONFIG_BUILD_LIBBUSYBOX
- bool "Build shared libbusybox"
- default y
- help
- Build a shared library libbusybox.so which contains all
- libraries used inside busybox.
-
-config CONFIG_FEATURE_FULL_LIBBUSYBOX
- bool "Feature-complete libbusybox"
- default n if !CONFIG_FEATURE_SHARED_BUSYBOX
- depends on CONFIG_BUILD_LIBBUSYBOX
- help
- Build a libbusybox with the complete feature-set, disregarding
- the actually selected config.
-
- Normally, libbusybox will only contain the features which are
- used by busybox itself. If you plan to write a separate
- standalone application which uses libbusybox say 'Y'.
-
- Say 'N' if in doubt.
-
-config CONFIG_FEATURE_SHARED_BUSYBOX
- bool "Use shared libbusybox for busybox"
- default y if CONFIG_BUILD_LIBBUSYBOX
- depends on !CONFIG_STATIC && CONFIG_BUILD_LIBBUSYBOX
- help
- Use libbusybox.so also for busybox itself.
- You need to have a working dynamic linker to use this variant.
-
-config CONFIG_LFS
- bool "Build with Large File Support (for accessing files > 2 GB)"
- default n
- select FDISK_SUPPORT_LARGE_DISKS
- help
- If you want to build BusyBox with large file support, then enable
- this option. This will have no effect if your kernel or your C
- library lacks large file support for large files. Some of the
- programs that can benefit from large file support include dd, gzip,
- cp, mount, tar, and many others. If you want to access files larger
- than 2 Gigabytes, enable this option. Otherwise, leave it set to 'N'.
-
-config USING_CROSS_COMPILER
- bool "Do you want to build BusyBox with a Cross Compiler?"
- default n
- help
- Do you want to build BusyBox with a Cross Compiler? If so,
- then enable this option. Otherwise leave it set to 'N'.
-
-config CROSS_COMPILER_PREFIX
- string "Cross Compiler prefix"
- default "/usr/i386-linux-uclibc/bin/i386-uclibc-"
- depends on USING_CROSS_COMPILER
- help
- If you want to build BusyBox with a cross compiler, then you
- will need to set this to the cross-compiler prefix. For example,
- if my cross-compiler is /usr/i386-linux-uclibc/bin/i386-uclibc-gcc
- then I would enter '/usr/i386-linux-uclibc/bin/i386-uclibc-' here,
- which will ensure the correct compiler is used.
-
-config EXTRA_CFLAGS_OPTIONS
- string "Any extra CFLAGS options for the compiler?"
- default ""
- help
- Do you want to pass any extra CFLAGS options to the compiler as
- you build BusyBox? If so, this is the option for you... For example,
- if you want to add some simple compiler switches (like -march=i686),
- or check for warnings using -Werror, just those options here.
-
-config CONFIG_BUILD_AT_ONCE
- bool "Compile all sources at once"
- default n
- help
- Normally each source-file is compiled with one invocation of
- the compiler.
- If you set this option, all sources are compiled at once.
- This gives the compiler more opportunities to optimize which can
- result in smaller and/or faster binaries.
-
- Setting this option will consume alot of memory, e.g. if you
- enable all applets with all features, gcc uses more than 300MB
- RAM during compilation of busybox.
-
- This option is most likely only beneficial for newer compilers
- such as gcc-4.1 and above.
-
- Say 'N' unless you know what you are doing.
-
-config CONFIG_FEATURE_SUSv2
- bool "Enable features that are in SuSv2 but not SuSv3?"
- default y
- help
- This option will enable backwards compatability with SuSv2,
- specifically, numeric options such as 'head -1 <file>' will be
- supported.
-
-config CONFIG_FEATURE_SUSv2_OBSOLETE
- bool "Enable features that are obsolete in SuSv2"
- depends on CONFIG_FEATURE_SUSv2
- default y
- help
- Enable pre- SuSv2 features which are deprecated in SuSv2 and
- above.
- Disables support for e.g. numeric arguments in fold.
-
-endmenu
-
-menu 'Installation Options'
-
-config CONFIG_INSTALL_NO_USR
- bool "Don't use /usr"
- default n
- help
- Disable use of /usr. Don't activate this option if you don't know
- that you really want this behaviour.
-
-choice
- prompt "Applets links"
- default CONFIG_INSTALL_APPLET_SYMLINKS
- help
- Choose how you install applets links.
-
-config CONFIG_INSTALL_APPLET_SYMLINKS
- bool "as soft-links"
- help
- Install applets as soft-links to the busybox binary. This needs some
- free inodes on the filesystem, but might help with filesystem
- generators that can't cope with hard-links.
-
-config CONFIG_INSTALL_APPLET_HARDLINKS
- bool "as hard-links"
- help
- Install applets as hard-links to the busybox binary. This might count
- on a filesystem with few inodes.
-
-config CONFIG_INSTALL_APPLET_DONT
- bool
- prompt "not installed"
- depends on CONFIG_FEATURE_INSTALLER || CONFIG_FEATURE_SH_STANDALONE_SHELL
- help
- Do not install applets links. Usefull when using the -install feature
- or a standalone shell for rescue pruposes.
-
-endchoice
-
-config PREFIX
- string "BusyBox installation prefix"
- default "./_install"
- help
- Define your directory to install BusyBox files/subdirs in.
-
-endmenu
-
-source archival/Config.in
-source coreutils/Config.in
-source console-tools/Config.in
-source debianutils/Config.in
-source editors/Config.in
-source findutils/Config.in
-source init/Config.in
-source loginutils/Config.in
-source e2fsprogs/Config.in
-source modutils/Config.in
-source util-linux/Config.in
-source miscutils/Config.in
-source networking/Config.in
-source procps/Config.in
-source shell/Config.in
-source sysklogd/Config.in
-
-menu 'Debugging Options'
-
-config CONFIG_DEBUG
- bool "Build BusyBox with Debugging symbols"
- default n
- help
- Say Y here if you wish to compile BusyBox with debugging symbols.
- This will allow you to use a debugger to examine BusyBox internals
- while applets are running. This increases the size of the binary
- considerably and should only be used when doing development.
- If you are doing development and want to debug BusyBox, answer Y.
-
- Most people should answer N.
-
-choice
- prompt "Additional debugging library"
- default CONFIG_NO_DEBUG_LIB
- depends on CONFIG_DEBUG
- help
- Using an additional debugging library will make BusyBox become
- considerable larger and will cause it to run more slowly. You
- should always leave this option disabled for production use.
-
- dmalloc support:
- ----------------
- This enables compiling with dmalloc ( http://dmalloc.com/ )
- which is an excellent public domain mem leak and malloc problem
- detector. To enable dmalloc, before running busybox you will
- want to properly set your environment, for example:
- export DMALLOC_OPTIONS=debug=0x34f47d83,inter=100,log=logfile
- The 'debug=' value is generated using the following command
- dmalloc -p log-stats -p log-non-free -p log-bad-space -p log-elapsed-time \
- -p check-fence -p check-heap -p check-lists -p check-blank \
- -p check-funcs -p realloc-copy -p allow-free-null
-
- Electric-fence support:
- -----------------------
- This enables compiling with Electric-fence support. Electric
- fence is another very useful malloc debugging library which uses
- your computer's virtual memory hardware to detect illegal memory
- accesses. This support will make BusyBox be considerable larger
- and run slower, so you should leave this option disabled unless
- you are hunting a hard to find memory problem.
-
-
-config CONFIG_NO_DEBUG_LIB
- bool "None"
-
-config CONFIG_DMALLOC
- bool "Dmalloc"
-
-config CONFIG_EFENCE
- bool "Electric-fence"
-
-endchoice
-
-
-endmenu
+++ /dev/null
-#
-# Automatically generated make config: don't edit
-#
-HAVE_DOT_CONFIG=y
-
-#
-# General Configuration
-#
-# CONFIG_FEATURE_BUFFERS_USE_MALLOC is not set
-CONFIG_FEATURE_BUFFERS_GO_ON_STACK=y
-# CONFIG_FEATURE_BUFFERS_GO_IN_BSS is not set
-CONFIG_FEATURE_VERBOSE_USAGE=y
-# CONFIG_FEATURE_INSTALLER is not set
-# CONFIG_LOCALE_SUPPORT is not set
-# CONFIG_FEATURE_DEVFS is not set
-CONFIG_FEATURE_DEVPTS=y
-# CONFIG_FEATURE_CLEAN_UP is not set
-# CONFIG_FEATURE_SUID is not set
-# CONFIG_SELINUX is not set
-
-#
-# Build Options
-#
-# CONFIG_STATIC is not set
-# CONFIG_LFS is not set
-# USING_CROSS_COMPILER is not set
-EXTRA_CFLAGS_OPTIONS=""
-
-#
-# Installation Options
-#
-# CONFIG_INSTALL_NO_USR is not set
-PREFIX="./_install"
-
-#
-# Archival Utilities
-#
-# CONFIG_AR is not set
-CONFIG_BUNZIP2=y
-# CONFIG_CPIO is not set
-# CONFIG_DPKG is not set
-# CONFIG_DPKG_DEB is not set
-CONFIG_GUNZIP=y
-# CONFIG_FEATURE_GUNZIP_UNCOMPRESS is not set
-CONFIG_GZIP=y
-# CONFIG_RPM2CPIO is not set
-# CONFIG_RPM is not set
-CONFIG_TAR=y
-CONFIG_FEATURE_TAR_CREATE=y
-CONFIG_FEATURE_TAR_BZIP2=y
-# CONFIG_FEATURE_TAR_FROM is not set
-CONFIG_FEATURE_TAR_GZIP=y
-# CONFIG_FEATURE_TAR_COMPRESS is not set
-CONFIG_FEATURE_TAR_OLDGNU_COMPATABILITY=y
-CONFIG_FEATURE_TAR_GNU_EXTENSIONS=y
-# CONFIG_FEATURE_TAR_LONG_OPTIONS is not set
-# CONFIG_UNCOMPRESS is not set
-CONFIG_UNZIP=y
-
-#
-# Common options for cpio and tar
-#
-# CONFIG_FEATURE_UNARCHIVE_TAPE is not set
-
-#
-# Coreutils
-#
-CONFIG_BASENAME=y
-# CONFIG_CAL is not set
-CONFIG_CAT=y
-CONFIG_CHGRP=y
-CONFIG_CHMOD=y
-CONFIG_CHOWN=y
-CONFIG_CHROOT=y
-CONFIG_CMP=y
-CONFIG_CP=y
-CONFIG_CUT=y
-CONFIG_DATE=y
-CONFIG_FEATURE_DATE_ISOFMT=y
-CONFIG_DD=y
-CONFIG_DF=y
-CONFIG_DIRNAME=y
-# CONFIG_DOS2UNIX is not set
-CONFIG_DU=y
-CONFIG_FEATURE_DU_DEFALT_BLOCKSIZE_1K=y
-CONFIG_ECHO=y
-CONFIG_FEATURE_FANCY_ECHO=y
-CONFIG_ENV=y
-CONFIG_EXPR=y
-CONFIG_FALSE=y
-# CONFIG_FOLD is not set
-CONFIG_HEAD=y
-# CONFIG_FEATURE_FANCY_HEAD is not set
-# CONFIG_HOSTID is not set
-CONFIG_ID=y
-CONFIG_INSTALL=y
-# CONFIG_LENGTH is not set
-CONFIG_LN=y
-# CONFIG_LOGNAME is not set
-CONFIG_LS=y
-CONFIG_FEATURE_LS_FILETYPES=y
-CONFIG_FEATURE_LS_FOLLOWLINKS=y
-CONFIG_FEATURE_LS_RECURSIVE=y
-CONFIG_FEATURE_LS_SORTFILES=y
-CONFIG_FEATURE_LS_TIMESTAMPS=y
-CONFIG_FEATURE_LS_USERNAME=y
-CONFIG_FEATURE_LS_COLOR=y
-# CONFIG_MD5SUM is not set
-CONFIG_MKDIR=y
-# CONFIG_MKFIFO is not set
-CONFIG_MKNOD=y
-CONFIG_MV=y
-# CONFIG_OD is not set
-# CONFIG_PRINTF is not set
-CONFIG_PWD=y
-# CONFIG_REALPATH is not set
-CONFIG_RM=y
-CONFIG_RMDIR=y
-# CONFIG_SEQ is not set
-# CONFIG_SHA1SUM is not set
-CONFIG_SLEEP=y
-# CONFIG_FEATURE_FANCY_SLEEP is not set
-CONFIG_SORT=y
-CONFIG_FEATURE_SORT_BIG=y
-# CONFIG_STTY is not set
-CONFIG_SYNC=y
-CONFIG_TAIL=y
-CONFIG_FEATURE_FANCY_TAIL=y
-CONFIG_TEE=y
-CONFIG_FEATURE_TEE_USE_BLOCK_IO=y
-CONFIG_TEST=y
-
-#
-# test (forced enabled for use with shell)
-#
-CONFIG_TOUCH=y
-CONFIG_TR=y
-CONFIG_TRUE=y
-CONFIG_TTY=y
-CONFIG_UNAME=y
-CONFIG_UNIQ=y
-CONFIG_USLEEP=y
-# CONFIG_UUDECODE is not set
-# CONFIG_UUENCODE is not set
-# CONFIG_WATCH is not set
-CONFIG_WC=y
-# CONFIG_WHO is not set
-CONFIG_WHOAMI=y
-CONFIG_YES=y
-
-#
-# Common options for cp and mv
-#
-CONFIG_FEATURE_PRESERVE_HARDLINKS=y
-
-#
-# Common options for ls and more
-#
-CONFIG_FEATURE_AUTOWIDTH=y
-
-#
-# Common options for df, du, ls
-#
-CONFIG_FEATURE_HUMAN_READABLE=y
-
-#
-# Console Utilities
-#
-CONFIG_CHVT=y
-CONFIG_CLEAR=y
-CONFIG_DEALLOCVT=y
-# CONFIG_DUMPKMAP is not set
-# CONFIG_LOADFONT is not set
-# CONFIG_LOADKMAP is not set
-CONFIG_OPENVT=y
-CONFIG_RESET=y
-# CONFIG_SETKEYCODES is not set
-
-#
-# Debian Utilities
-#
-CONFIG_MKTEMP=y
-# CONFIG_PIPE_PROGRESS is not set
-CONFIG_READLINK=y
-# CONFIG_RUN_PARTS is not set
-# CONFIG_START_STOP_DAEMON is not set
-CONFIG_WHICH=y
-
-#
-# Editors
-#
-# CONFIG_AWK is not set
-# CONFIG_PATCH is not set
-CONFIG_SED=y
-CONFIG_VI=y
-CONFIG_FEATURE_VI_COLON=y
-CONFIG_FEATURE_VI_YANKMARK=y
-CONFIG_FEATURE_VI_SEARCH=y
-CONFIG_FEATURE_VI_USE_SIGNALS=y
-CONFIG_FEATURE_VI_DOT_CMD=y
-CONFIG_FEATURE_VI_READONLY=y
-CONFIG_FEATURE_VI_SETOPTS=y
-CONFIG_FEATURE_VI_SET=y
-CONFIG_FEATURE_VI_WIN_RESIZE=y
-CONFIG_FEATURE_VI_OPTIMIZE_CURSOR=y
-
-#
-# Finding Utilities
-#
-CONFIG_FIND=y
-CONFIG_FEATURE_FIND_MTIME=y
-CONFIG_FEATURE_FIND_PERM=y
-CONFIG_FEATURE_FIND_TYPE=y
-CONFIG_FEATURE_FIND_XDEV=y
-# CONFIG_FEATURE_FIND_NEWER is not set
-# CONFIG_FEATURE_FIND_INUM is not set
-CONFIG_GREP=y
-CONFIG_FEATURE_GREP_EGREP_ALIAS=y
-CONFIG_FEATURE_GREP_FGREP_ALIAS=y
-CONFIG_FEATURE_GREP_CONTEXT=y
-CONFIG_XARGS=y
-# CONFIG_FEATURE_XARGS_SUPPORT_CONFIRMATION is not set
-CONFIG_FEATURE_XARGS_SUPPORT_QUOTES=y
-CONFIG_FEATURE_XARGS_SUPPORT_TERMOPT=y
-CONFIG_FEATURE_XARGS_SUPPORT_ZERO_TERM=y
-
-#
-# Init Utilities
-#
-CONFIG_INIT=y
-CONFIG_FEATURE_USE_INITTAB=y
-CONFIG_FEATURE_INITRD=y
-# CONFIG_FEATURE_INIT_COREDUMPS is not set
-CONFIG_FEATURE_EXTRA_QUIET=y
-CONFIG_HALT=y
-CONFIG_POWEROFF=y
-CONFIG_REBOOT=y
-# CONFIG_MESG is not set
-
-#
-# Login/Password Management Utilities
-#
-# CONFIG_USE_BB_PWD_GRP is not set
-# CONFIG_ADDGROUP is not set
-# CONFIG_DELGROUP is not set
-# CONFIG_ADDUSER is not set
-# CONFIG_DELUSER is not set
-# CONFIG_GETTY is not set
-# CONFIG_LOGIN is not set
-# CONFIG_PASSWD is not set
-# CONFIG_SU is not set
-# CONFIG_SULOGIN is not set
-# CONFIG_VLOCK is not set
-
-#
-# Miscellaneous Utilities
-#
-# CONFIG_ADJTIMEX is not set
-# CONFIG_CROND is not set
-# CONFIG_CRONTAB is not set
-# CONFIG_DC is not set
-# CONFIG_DEVFSD is not set
-# CONFIG_LAST is not set
-# CONFIG_HDPARM is not set
-# CONFIG_MAKEDEVS is not set
-# CONFIG_MT is not set
-# CONFIG_RX is not set
-CONFIG_STRINGS=y
-CONFIG_TIME=y
-# CONFIG_WATCHDOG is not set
-
-#
-# Linux Module Utilities
-#
-# CONFIG_INSMOD is not set
-# CONFIG_LSMOD is not set
-# CONFIG_MODPROBE is not set
-# CONFIG_RMMOD is not set
-
-#
-# Networking Utilities
-#
-# CONFIG_FEATURE_IPV6 is not set
-# CONFIG_ARPING is not set
-# CONFIG_FTPGET is not set
-# CONFIG_FTPPUT is not set
-CONFIG_HOSTNAME=y
-# CONFIG_HTTPD is not set
-CONFIG_IFCONFIG=y
-CONFIG_FEATURE_IFCONFIG_STATUS=y
-# CONFIG_FEATURE_IFCONFIG_SLIP is not set
-# CONFIG_FEATURE_IFCONFIG_MEMSTART_IOADDR_IRQ is not set
-# CONFIG_FEATURE_IFCONFIG_HW is not set
-# CONFIG_FEATURE_IFCONFIG_BROADCAST_PLUS is not set
-# CONFIG_IFUPDOWN is not set
-# CONFIG_INETD is not set
-# CONFIG_IP is not set
-# CONFIG_IPCALC is not set
-# CONFIG_IPADDR is not set
-# CONFIG_IPLINK is not set
-# CONFIG_IPROUTE is not set
-# CONFIG_IPTUNNEL is not set
-# CONFIG_NAMEIF is not set
-# CONFIG_NC is not set
-# CONFIG_NETSTAT is not set
-# CONFIG_NSLOOKUP is not set
-CONFIG_PING=y
-CONFIG_FEATURE_FANCY_PING=y
-CONFIG_ROUTE=y
-# CONFIG_TELNET is not set
-# CONFIG_TELNETD is not set
-# CONFIG_TFTP is not set
-# CONFIG_TRACEROUTE is not set
-# CONFIG_VCONFIG is not set
-CONFIG_WGET=y
-CONFIG_FEATURE_WGET_STATUSBAR=y
-CONFIG_FEATURE_WGET_AUTHENTICATION=y
-# CONFIG_FEATURE_WGET_IP6_LITERAL is not set
-
-#
-# udhcp Server/Client
-#
-# CONFIG_UDHCPD is not set
-# CONFIG_UDHCPC is not set
-
-#
-# Process Utilities
-#
-CONFIG_FREE=y
-CONFIG_KILL=y
-CONFIG_KILLALL=y
-CONFIG_PIDOF=y
-CONFIG_PS=y
-# CONFIG_RENICE is not set
-# CONFIG_TOP is not set
-CONFIG_UPTIME=y
-# CONFIG_BB_SYSCTL is not set
-
-#
-# Another Bourne-like Shell
-#
-CONFIG_FEATURE_SH_IS_ASH=y
-# CONFIG_FEATURE_SH_IS_HUSH is not set
-# CONFIG_FEATURE_SH_IS_LASH is not set
-# CONFIG_FEATURE_SH_IS_MSH is not set
-# CONFIG_FEATURE_SH_IS_NONE is not set
-CONFIG_ASH=y
-
-#
-# Ash Shell Options
-#
-CONFIG_ASH_JOB_CONTROL=y
-CONFIG_ASH_ALIAS=y
-CONFIG_ASH_MATH_SUPPORT=y
-CONFIG_ASH_MATH_SUPPORT_64=y
-# CONFIG_ASH_GETOPTS is not set
-# CONFIG_ASH_CMDCMD is not set
-# CONFIG_ASH_MAIL is not set
-CONFIG_ASH_OPTIMIZE_FOR_SIZE=y
-# CONFIG_ASH_RANDOM_SUPPORT is not set
-# CONFIG_HUSH is not set
-# CONFIG_LASH is not set
-# CONFIG_MSH is not set
-
-#
-# Bourne Shell Options
-#
-# CONFIG_FEATURE_SH_EXTRA_QUIET is not set
-# CONFIG_FEATURE_SH_STANDALONE_SHELL is not set
-CONFIG_FEATURE_COMMAND_EDITING=y
-CONFIG_FEATURE_COMMAND_HISTORY=15
-CONFIG_FEATURE_COMMAND_SAVEHISTORY=y
-CONFIG_FEATURE_COMMAND_TAB_COMPLETION=y
-# CONFIG_FEATURE_COMMAND_USERNAME_COMPLETION is not set
-CONFIG_FEATURE_SH_FANCY_PROMPT=y
-
-#
-# System Logging Utilities
-#
-CONFIG_SYSLOGD=y
-CONFIG_FEATURE_ROTATE_LOGFILE=y
-# CONFIG_FEATURE_REMOTE_LOG is not set
-# CONFIG_FEATURE_IPC_SYSLOG is not set
-CONFIG_KLOGD=y
-CONFIG_LOGGER=y
-
-#
-# Linux System Utilities
-#
-CONFIG_DMESG=y
-# CONFIG_FBSET is not set
-# CONFIG_FDFLUSH is not set
-# CONFIG_FDFORMAT is not set
-# CONFIG_FDISK is not set
-# CONFIG_FREERAMDISK is not set
-# CONFIG_FSCK_MINIX is not set
-# CONFIG_MKFS_MINIX is not set
-# CONFIG_GETOPT is not set
-CONFIG_HEXDUMP=y
-# CONFIG_HWCLOCK is not set
-# CONFIG_IPCRM is not set
-# CONFIG_IPCS is not set
-# CONFIG_LOSETUP is not set
-# CONFIG_MKSWAP is not set
-CONFIG_MORE=y
-CONFIG_FEATURE_USE_TERMIOS=y
-CONFIG_PIVOT_ROOT=y
-# CONFIG_RDATE is not set
-CONFIG_SWAPONOFF=y
-CONFIG_MOUNT=y
-# CONFIG_FEATURE_MOUNT_NFS is not set
-CONFIG_UMOUNT=y
-
-#
-# Common options for mount/umount
-#
-CONFIG_FEATURE_MOUNT_LOOP=y
-# CONFIG_FEATURE_MTAB_SUPPORT is not set
-
-#
-# Debugging Options
-#
-# CONFIG_DEBUG is not set
projects / oweals / busybox.git / commitdiff