u32 apb1_reset_cfg; /* 0x5b4 Bus Software Reset Register 4 */
};
-/* pll4_periph0_cfg */
-#define PLL4_CFG_DEFAULT 0x90002800 /* 960 MHz */
-
#define CCM_PLL4_CTRL_N_SHIFT 8
#define CCM_PLL4_CTRL_N_MASK (0xff << CCM_PLL4_CTRL_N_SHIFT)
#define CCM_PLL4_CTRL_P_SHIFT 16
#define CCM_PLL4_CTRL_M_SHIFT 18
#define CCM_PLL4_CTRL_M_MASK (0x1 << CCM_PLL4_CTRL_M_SHIFT)
+/* pllx_cfg bits */
+#define CCM_PLL1_CTRL_N(n) (((n) & 0xff) << 8)
+#define CCM_PLL1_CTRL_P(n) (((n) & 0x1) << 16)
+#define CCM_PLL1_CTRL_EN (1 << 31)
+#define CCM_PLL1_CLOCK_TIME_2 (2 << 24)
+
+#define CCM_PLL2_CTRL_N(n) (((n) & 0xff) << 8)
+#define CCM_PLL2_CTRL_P(n) (((n) & 0x1) << 16)
+#define CCM_PLL2_CTRL_EN (1 << 31)
+#define CCM_PLL2_CLOCK_TIME_2 (2 << 24)
+
+#define CCM_PLL4_CTRL_N(n) (((n) & 0xff) << 8)
+#define CCM_PLL4_CTRL_EN (1 << 31)
+
+#define CCM_PLL6_CTRL_N(n) (((n) & 0xff) << 8)
+#define CCM_PLL6_CTRL_P(p) (((p) & 0x1) << 16)
+#define CCM_PLL6_CTRL_EN (1 << 31)
+#define CCM_PLL6_CFG_UPDATE (1 << 30)
+
+#define CCM_PLL12_CTRL_N(n) (((n) & 0xff) << 8)
+#define CCM_PLL12_CTRL_EN (1 << 31)
+
+#define PLL_C0CPUX_STATUS (1 << 0)
+#define PLL_C1CPUX_STATUS (1 << 1)
+#define PLL_DDR_STATUS (1 << 5)
+#define PLL_PERIPH1_STATUS (1 << 11)
+
+/* cpu_clk_source bits */
+#define C0_CPUX_CLK_SRC_SHIFT 0
+#define C1_CPUX_CLK_SRC_SHIFT 8
+#define C0_CPUX_CLK_SRC_MASK (1 << C0_CPUX_CLK_SRC_SHIFT)
+#define C1_CPUX_CLK_SRC_MASK (1 << C1_CPUX_CLK_SRC_SHIFT)
+#define C0_CPUX_CLK_SRC_OSC24M (0 << C0_CPUX_CLK_SRC_SHIFT)
+#define C0_CPUX_CLK_SRC_PLL1 (1 << C0_CPUX_CLK_SRC_SHIFT)
+#define C1_CPUX_CLK_SRC_OSC24M (0 << C1_CPUX_CLK_SRC_SHIFT)
+#define C1_CPUX_CLK_SRC_PLL2 (1 << C1_CPUX_CLK_SRC_SHIFT)
+
+/* c0_cfg */
+#define C0_CFG_AXI0_CLK_DIV_RATIO(n) (((n - 1) & 0x3) << 0)
+#define C0_CFG_APB0_CLK_DIV_RATIO(n) (((n - 1) & 0x3) << 8)
+
+/* ahbx_cfg */
+#define AHBx_SRC_CLK_SELECT_SHIFT 24
+#define AHBx_SRC_MASK (0x3 << AHBx_SRC_CLK_SELECT_SHIFT)
+#define AHB0_SRC_GTBUS_CLK (0x0 << AHBx_SRC_CLK_SELECT_SHIFT)
+#define AHB1_SRC_GTBUS_CLK (0x0 << AHBx_SRC_CLK_SELECT_SHIFT)
+#define AHB2_SRC_OSC24M (0x0 << AHBx_SRC_CLK_SELECT_SHIFT)
+#define AHBx_SRC_PLL_PERIPH0 (0x1 << AHBx_SRC_CLK_SELECT_SHIFT)
+#define AHBx_SRC_PLL_PERIPH1 (0x2 << AHBx_SRC_CLK_SELECT_SHIFT)
+#define AHBx_CLK_DIV_RATIO(n) (((ffs(n) - 1) & 0x3) << 0)
+
+/* apb0_cfg */
+#define APB0_SRC_CLK_SELECT_SHIFT 24
+#define APB0_SRC_MASK (0x1 << APB0_SRC_CLK_SELECT_SHIFT)
+#define APB0_SRC_OSC24M (0x0 << APB0_SRC_CLK_SELECT_SHIFT)
+#define APB0_SRC_PLL_PERIPH0 (0x1 << APB0_SRC_CLK_SELECT_SHIFT)
+#define APB0_CLK_DIV_RATIO(n) (((ffs(n) - 1) & 0x3) << 0)
+
+/* gtbus_clk_cfg */
+#define GTBUS_SRC_CLK_SELECT_SHIFT 24
+#define GTBUS_SRC_MASK (0x3 << GTBUS_SRC_CLK_SELECT_SHIFT)
+#define GTBUS_SRC_OSC24M (0x0 << GTBUS_SRC_CLK_SELECT_SHIFT)
+#define GTBUS_SRC_PLL_PERIPH0 (0x1 << GTBUS_SRC_CLK_SELECT_SHIFT)
+#define GTBUS_SRC_PLL_PERIPH1 (0x2 << GTBUS_SRC_CLK_SELECT_SHIFT)
+#define GTBUS_CLK_DIV_RATIO(n) (((n - 1) & 0x3) << 0)
+
+/* cci400_clk_cfg */
+#define CCI400_SRC_CLK_SELECT_SHIFT 24
+#define CCI400_SRC_MASK (0x3 << CCI400_SRC_CLK_SELECT_SHIFT)
+#define CCI400_SRC_OSC24M (0x0 << CCI400_SRC_CLK_SELECT_SHIFT)
+#define CCI400_SRC_PLL_PERIPH0 (0x1 << CCI400_SRC_CLK_SELECT_SHIFT)
+#define CCI400_SRC_PLL_PERIPH1 (0x2 << CCI400_SRC_CLK_SELECT_SHIFT)
+#define CCI400_CLK_DIV_RATIO(n) (((n - 1) & 0x3) << 0)
+
/* sd#_clk_cfg fields */
#define CCM_MMC_CTRL_M(x) ((x) - 1)
#define CCM_MMC_CTRL_OCLK_DLY(x) ((x) << 8)
#ifndef __ASSEMBLY__
+void clock_set_pll1(unsigned int clk);
+void clock_set_pll2(unsigned int clk);
+void clock_set_pll4(unsigned int clk);
+void clock_set_pll6(unsigned int clk);
+void clock_set_pll12(unsigned int clk);
unsigned int clock_get_pll4_periph0(void);
#endif
+
/*
* sun9i specific clock code
*
* (C) Copyright 2015 Hans de Goede <hdegoede@redhat.com>
*
+ * (C) Copyright 2016 Theobroma Systems Design und Consulting GmbH
+ * Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
+ *
* SPDX-License-Identifier: GPL-2.0+
*/
#include <asm/arch/prcm.h>
#include <asm/arch/sys_proto.h>
+
+#ifdef CONFIG_SPL_BUILD
+
+void clock_init_safe(void)
+{
+ struct sunxi_ccm_reg * const ccm =
+ (struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
+
+ /* Set up PLL12 (peripheral 1) */
+ clock_set_pll12(1200000000);
+
+ /* Set up PLL1 (cluster 0) and PLL2 (cluster 1) */
+ clock_set_pll1(408000000);
+ clock_set_pll2(408000000);
+
+ /* Set up PLL4 (peripheral 0) */
+ clock_set_pll4(960000000);
+
+ /* Set up dividers for AXI0 and APB0 on cluster 0: PLL1 / 2 = 204MHz */
+ writel(C0_CFG_AXI0_CLK_DIV_RATIO(2) |
+ C0_CFG_APB0_CLK_DIV_RATIO(2), &ccm->c0_cfg);
+
+ /* AHB0: 120 MHz (PLL_PERIPH0 / 8) */
+ writel(AHBx_SRC_PLL_PERIPH0 | AHBx_CLK_DIV_RATIO(8),
+ &ccm->ahb0_cfg);
+ /* AHB1: 240 MHz (PLL_PERIPH0 / 4) */
+ writel(AHBx_SRC_PLL_PERIPH0 | AHBx_CLK_DIV_RATIO(4),
+ &ccm->ahb1_cfg);
+ /* AHB2: 120 MHz (PLL_PERIPH0 / 8) */
+ writel(AHBx_SRC_PLL_PERIPH0 | AHBx_CLK_DIV_RATIO(8),
+ &ccm->ahb2_cfg);
+ /* APB0: 120 MHz (PLL_PERIPH0 / 8) */
+ writel(APB0_SRC_PLL_PERIPH0 | APB0_CLK_DIV_RATIO(8),
+ &ccm->apb0_cfg);
+
+ /* GTBUS: 400MHz (PERIPH0 div 3) */
+ writel(GTBUS_SRC_PLL_PERIPH1 | GTBUS_CLK_DIV_RATIO(3),
+ &ccm->gtbus_cfg);
+ /* CCI400: 480MHz (PERIPH1 div 2) */
+ writel(CCI400_SRC_PLL_PERIPH0 | CCI400_CLK_DIV_RATIO(2),
+ &ccm->cci400_cfg);
+
+ /* Deassert DMA reset and open clock gating for DMA */
+ setbits_le32(&ccm->ahb_reset1_cfg, (1 << 24));
+ setbits_le32(&ccm->apb1_gate, (1 << 24));
+
+ /* set enable-bit in TSTAMP_CTRL_REG */
+ writel(1, 0x01720000);
+}
+#endif
+
void clock_init_uart(void)
{
struct sunxi_ccm_reg *const ccm =
setbits_le32(&ccm->apb1_reset_cfg,
1 << (APB1_RESET_UART_SHIFT +
CONFIG_CONS_INDEX - 1));
+}
+
+#ifdef CONFIG_SPL_BUILD
+void clock_set_pll1(unsigned int clk)
+{
+ struct sunxi_ccm_reg * const ccm =
+ (struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
+ const int p = 0;
+
+ /* Switch cluster 0 to 24MHz clock while changing PLL1 */
+ clrsetbits_le32(&ccm->cpu_clk_source, C0_CPUX_CLK_SRC_MASK,
+ C0_CPUX_CLK_SRC_OSC24M);
+
+ writel(CCM_PLL1_CTRL_EN | CCM_PLL1_CTRL_P(p) |
+ CCM_PLL1_CLOCK_TIME_2 |
+ CCM_PLL1_CTRL_N(clk / 24000000),
+ &ccm->pll1_c0_cfg);
+ /*
+ * Don't bother with the stable-time registers, as it doesn't
+ * wait until the PLL is stable. Note, that even Allwinner
+ * just uses a delay loop (or rather the AVS timer) for this
+ * instead of the PLL_STABLE_STATUS register.
+ */
+ sdelay(2000);
+
+ /* Switch cluster 0 back to PLL1 */
+ clrsetbits_le32(&ccm->cpu_clk_source, C0_CPUX_CLK_SRC_MASK,
+ C0_CPUX_CLK_SRC_PLL1);
+}
+
+void clock_set_pll2(unsigned int clk)
+{
+ struct sunxi_ccm_reg * const ccm =
+ (struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
+ const int p = 0;
+
+ /* Switch cluster 1 to 24MHz clock while changing PLL2 */
+ clrsetbits_le32(&ccm->cpu_clk_source, C1_CPUX_CLK_SRC_MASK,
+ C1_CPUX_CLK_SRC_OSC24M);
+
+ writel(CCM_PLL2_CTRL_EN | CCM_PLL2_CTRL_P(p) |
+ CCM_PLL2_CLOCK_TIME_2 | CCM_PLL2_CTRL_N(clk / 24000000),
+ &ccm->pll2_c1_cfg);
+
+ sdelay(2000);
+
+ /* Switch cluster 1 back to PLL2 */
+ clrsetbits_le32(&ccm->cpu_clk_source, C1_CPUX_CLK_SRC_MASK,
+ C1_CPUX_CLK_SRC_PLL2);
+}
+
+void clock_set_pll6(unsigned int clk)
+{
+ struct sunxi_ccm_reg * const ccm =
+ (struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
+ const int p = 0;
+
+ writel(CCM_PLL6_CTRL_EN | CCM_PLL6_CFG_UPDATE | CCM_PLL6_CTRL_P(p)
+ | CCM_PLL6_CTRL_N(clk / 24000000),
+ &ccm->pll6_ddr_cfg);
+ do { } while (!(readl(&ccm->pll_stable_status) & PLL_DDR_STATUS));
+
+ sdelay(2000);
+}
+
+void clock_set_pll12(unsigned int clk)
+{
+ struct sunxi_ccm_reg * const ccm =
+ (struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
+
+ if (readl(&ccm->pll12_periph1_cfg) & CCM_PLL12_CTRL_EN)
+ return;
+
+ writel(CCM_PLL12_CTRL_EN | CCM_PLL12_CTRL_N(clk / 24000000),
+ &ccm->pll12_periph1_cfg);
+
+ sdelay(2000);
+}
+
+
+void clock_set_pll4(unsigned int clk)
+{
+ struct sunxi_ccm_reg * const ccm =
+ (struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
+
+ writel(CCM_PLL4_CTRL_EN | CCM_PLL4_CTRL_N(clk / 24000000),
+ &ccm->pll4_periph0_cfg);
- /* Dup with clock_init_safe(), drop once sun9i SPL support lands */
- writel(PLL4_CFG_DEFAULT, &ccm->pll4_periph0_cfg);
+ sdelay(2000);
}
+#endif
int clock_twi_onoff(int port, int state)
{
projects / oweals / u-boot.git / commitdiff