base - print or set address offset
loop - initialize loop on address range
+config MX_CYCLIC
+ bool "Enable cyclic md/mw commands"
+ depends on CMD_MEMORY
+ help
+ Add the "mdc" and "mwc" memory commands. These are cyclic
+ "md/mw" commands.
+ Examples:
+
+ => mdc.b 10 4 500
+ This command will print 4 bytes (10,11,12,13) each 500 ms.
+
+ => mwc.l 100 12345678 10
+ This command will write 12345678 to address 100 all 10 ms.
+
config CMD_RANDOM
bool "random"
default y
# CONFIG_AUTOBOOT is not set
CONFIG_CMD_IMLS=y
CONFIG_LOOPW=y
+CONFIG_MX_CYCLIC=y
# CONFIG_CMD_SETEXPR is not set
CONFIG_CMD_CACHE=y
CONFIG_DEFAULT_DEVICE_TREE="M5249EVB"
CONFIG_CMD_IMLS=y
# CONFIG_CMD_XIMG is not set
CONFIG_LOOPW=y
+CONFIG_MX_CYCLIC=y
# CONFIG_CMD_SETEXPR is not set
CONFIG_CMD_CACHE=y
CONFIG_CMD_TIMER=y
# CONFIG_AUTOBOOT is not set
CONFIG_CMD_BOOTZ=y
CONFIG_CMD_ASKENV=y
+CONFIG_MX_CYCLIC=y
# CONFIG_CMD_FLASH is not set
CONFIG_CMD_GPIO=y
CONFIG_CMD_I2C=y
# CONFIG_AUTOBOOT is not set
CONFIG_CMD_BOOTZ=y
CONFIG_CMD_ASKENV=y
+CONFIG_MX_CYCLIC=y
# CONFIG_CMD_FLASH is not set
CONFIG_CMD_GPIO=y
CONFIG_CMD_I2C=y
CONFIG_HUSH_PARSER=y
CONFIG_CMD_BOOTZ=y
CONFIG_CMD_ASKENV=y
+CONFIG_MX_CYCLIC=y
# CONFIG_CMD_FLASH is not set
CONFIG_CMD_GPIO=y
CONFIG_CMD_I2C=y
# CONFIG_AUTOBOOT is not set
CONFIG_CMD_BOOTZ=y
CONFIG_CMD_ASKENV=y
+CONFIG_MX_CYCLIC=y
# CONFIG_CMD_FLASH is not set
CONFIG_CMD_GPIO=y
CONFIG_CMD_I2C=y
# CONFIG_AUTOBOOT is not set
CONFIG_CMD_BOOTZ=y
CONFIG_CMD_ASKENV=y
+CONFIG_MX_CYCLIC=y
# CONFIG_CMD_FLASH is not set
CONFIG_CMD_GPIO=y
CONFIG_CMD_I2C=y
# CONFIG_AUTOBOOT is not set
CONFIG_CMD_BOOTZ=y
CONFIG_CMD_ASKENV=y
+CONFIG_MX_CYCLIC=y
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_SETEXPR is not set
CONFIG_CMD_MII=y
# CONFIG_AUTOBOOT is not set
CONFIG_CMD_BOOTZ=y
CONFIG_CMD_ASKENV=y
+CONFIG_MX_CYCLIC=y
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_SETEXPR is not set
CONFIG_CMD_MII=y
# CONFIG_AUTOBOOT is not set
CONFIG_CMD_BOOTZ=y
CONFIG_CMD_ASKENV=y
+CONFIG_MX_CYCLIC=y
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_SETEXPR is not set
CONFIG_CMD_MII=y
# CONFIG_AUTOBOOT is not set
CONFIG_CMD_BOOTZ=y
CONFIG_CMD_ASKENV=y
+CONFIG_MX_CYCLIC=y
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_SETEXPR is not set
CONFIG_CMD_MII=y
# CONFIG_AUTOBOOT is not set
CONFIG_CMD_BOOTZ=y
CONFIG_CMD_ASKENV=y
+CONFIG_MX_CYCLIC=y
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_SETEXPR is not set
CONFIG_CMD_MII=y
# CONFIG_AUTOBOOT is not set
CONFIG_CMD_BOOTZ=y
CONFIG_CMD_ASKENV=y
+CONFIG_MX_CYCLIC=y
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_SETEXPR is not set
CONFIG_CMD_MII=y
CONFIG_CMD_BOOTZ=y
CONFIG_CMD_ASKENV=y
CONFIG_CRC32_VERIFY=y
+CONFIG_MX_CYCLIC=y
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_SETEXPR is not set
CONFIG_CMD_CACHE=y
CONFIG_HUSH_PARSER=y
CONFIG_SYS_PROMPT="U-Boot > "
CONFIG_CRC32_VERIFY=y
+CONFIG_MX_CYCLIC=y
CONFIG_CMD_DM=y
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_GPT is not set
# CONFIG_CMD_BOOTZ is not set
CONFIG_CMD_IMLS=y
CONFIG_CRC32_VERIFY=y
+CONFIG_MX_CYCLIC=y
CONFIG_CMD_DM=y
# CONFIG_CMD_GPT is not set
# CONFIG_CMD_MMC is not set
CONFIG_HUSH_PARSER=y
CONFIG_SYS_PROMPT="U-Boot > "
CONFIG_CRC32_VERIFY=y
+CONFIG_MX_CYCLIC=y
CONFIG_CMD_DM=y
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_GPT is not set
CONFIG_SPL_I2C_SUPPORT=y
CONFIG_SPL_POWER_SUPPORT=y
CONFIG_SPL_SPI_LOAD=y
+CONFIG_MX_CYCLIC=y
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_GPIO is not set
# CONFIG_CMD_GPT is not set
CONFIG_SYS_CONSOLE_INFO_QUIET=y
CONFIG_VERSION_VARIABLE=y
CONFIG_BOARD_EARLY_INIT_F=y
+CONFIG_MX_CYCLIC=y
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_GPIO is not set
# CONFIG_CMD_GPT is not set
CONFIG_SPL_I2C_SUPPORT=y
CONFIG_SPL_POWER_SUPPORT=y
CONFIG_SPL_SPI_LOAD=y
+CONFIG_MX_CYCLIC=y
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_GPIO is not set
# CONFIG_CMD_GPT is not set
CONFIG_SYS_CONSOLE_INFO_QUIET=y
CONFIG_VERSION_VARIABLE=y
CONFIG_BOARD_EARLY_INIT_F=y
+CONFIG_MX_CYCLIC=y
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_GPIO is not set
# CONFIG_CMD_GPT is not set
CONFIG_SPL_I2C_SUPPORT=y
CONFIG_SPL_POWER_SUPPORT=y
CONFIG_SPL_SPI_LOAD=y
+CONFIG_MX_CYCLIC=y
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_GPIO is not set
# CONFIG_CMD_GPT is not set
CONFIG_SYS_CONSOLE_INFO_QUIET=y
CONFIG_VERSION_VARIABLE=y
CONFIG_BOARD_EARLY_INIT_F=y
+CONFIG_MX_CYCLIC=y
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_GPIO is not set
# CONFIG_CMD_GPT is not set
CONFIG_SPL_I2C_SUPPORT=y
CONFIG_SPL_POWER_SUPPORT=y
CONFIG_SPL_SPI_LOAD=y
+CONFIG_MX_CYCLIC=y
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_GPIO is not set
# CONFIG_CMD_GPT is not set
CONFIG_VERSION_VARIABLE=y
CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_HUSH_PARSER=y
+CONFIG_MX_CYCLIC=y
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_GPIO is not set
# CONFIG_CMD_GPT is not set
CONFIG_AUTOBOOT_STOP_STR="l"
CONFIG_CMD_ASKENV=y
CONFIG_CRC32_VERIFY=y
+CONFIG_MX_CYCLIC=y
# CONFIG_CMD_FLASH is not set
CONFIG_CMD_MMC=y
CONFIG_CMD_SF=y
CONFIG_HUSH_PARSER=y
CONFIG_CRC32_VERIFY=y
# CONFIG_CMD_EEPROM is not set
+CONFIG_MX_CYCLIC=y
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_GPIO is not set
CONFIG_CMD_NAND=y
CONFIG_AUTOBOOT_STOP_STR=" "
CONFIG_CMD_IMLS=y
CONFIG_LOOPW=y
+CONFIG_MX_CYCLIC=y
CONFIG_CMD_GPIO=y
CONFIG_CMD_I2C=y
CONFIG_CMD_NAND=y
CONFIG_CMD_IMLS=y
CONFIG_CMD_ASKENV=y
CONFIG_CRC32_VERIFY=y
+CONFIG_MX_CYCLIC=y
CONFIG_CMD_SAVES=y
CONFIG_CMD_DHCP=y
CONFIG_CMD_PING=y
*/
#define CONFIG_SYS_DEVICE_NULLDEV 1 /* include nulldev device */
-#define CONFIG_MX_CYCLIC 1 /* enable mdc/mwc commands */
#define CONFIG_SYS_LOAD_ADDR 0x200000 /* default load address */
/* undef to save memory */
-#define CONFIG_MX_CYCLIC 1 /* enable mdc/mwc commands */
-
#define CONFIG_SYS_LOAD_ADDR 0x20000 /* default load address */
#define CONFIG_SYS_MEMTEST_START 0x0
/* version string, parser, etc */
-#define CONFIG_MX_CYCLIC
-
/* Initial upstream - boot to cmd prompt only */
#define CONFIG_BOOTCOMMAND ""
/* version string, parser, etc */
-#define CONFIG_MX_CYCLIC
-
/* Initial upstream - boot to cmd prompt only */
#define CONFIG_BOOTCOMMAND ""
/* version string, parser, etc */
-#define CONFIG_MX_CYCLIC
-
/* Enable Time Command */
#endif /* __BCM_EP_BOARD_H */
#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Args Buffer Size */
#define CONFIG_SYS_LOAD_ADDR (PHYS_SDRAM_1 + 0x700000)
-#define CONFIG_MX_CYCLIC
/*
* Linux Information
#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Args Buffer Size */
#define CONFIG_SYS_LOAD_ADDR (PHYS_SDRAM_1 + 0x700000)
-#define CONFIG_MX_CYCLIC
/*
* Linux Information
#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Args Buffer Size */
#define CONFIG_SYS_LOAD_ADDR (PHYS_SDRAM_1 + 0x700000)
-#define CONFIG_MX_CYCLIC
/*
* USB Configs
DFU_ALT_INFO_MMC \
/* U-Boot general configuration */
-#define CONFIG_MX_CYCLIC
#define CONFIG_TIMESTAMP
/* EDMA3 */
#define CONFIG_BOOT_PARAMS_ADDR 0x00000100
#define CONFIG_CMDLINE_TAG
#define CONFIG_SETUP_MEMORY_TAGS
-#define CONFIG_MX_CYCLIC /* enable mdc/mwc commands */
#define CONFIG_SYS_MEMTEST_START 0x00800000
#define CONFIG_SYS_MEMTEST_END 0x04000000
/* U-Boot autoboot configuration */
/*==============================*/
-#define CONFIG_MX_CYCLIC
-
/*=========================================*/
/* FPGA Registers (board info and control) */
CONFIG_MXS_AUART
CONFIG_MXS_AUART_BASE
CONFIG_MXS_OCOTP
-CONFIG_MX_CYCLIC
CONFIG_MY_OPTION
CONFIG_NANDFLASH_SIZE
CONFIG_NAND_6BYTES_OOB_FREE_10BYTES_ECC