Commit
d397f7c45b0b ("net: phy: micrel: Separate KSZ9000 drivers from
KSZ8000 drivers") separated the KSZ8xxx and KSZ90x1 drivers and warns
that you shouldn't select both of them due to a device ID clash between
the KSZ9021 and the KS8721, asserting that "it is highly unlikely for a
system to contain both a KSZ8000 and a KSZ9000 PHY". Unfortunately
boards like the SAMA5D3xEK do contain both types of PHY, but fortunately
the Linux Micrel PHY driver provides a solution by using different PHY
ID and mask values to distinguish these chips.
This commit contains the following changes:
- The PHY ID and mask values for the KSZ9021 and the KS8721 now match
those used by the Linux driver.
- The warnings about not enabling both drivers have been removed.
- The description for PHY_MICREL_KSZ8XXX has been corrected (these are
10/100 PHYs, not GbE PHYs).
- PHY_MICREL_KSZ9021 and PHY_MICREL_KSZ9031 no longer select PHY_GIGE
since this is selected by PHY_MICREL_KSZ90X1.
- All of the relevant defconfig files have been updated now that
PHY_MICREL_KSZ8XXX does not default to 'Y'.
Signed-off-by: James Byrne <james.byrne@origamienergy.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
CONFIG_SPI_FLASH_SPANSION=y
CONFIG_SPI_FLASH_MTD=y
CONFIG_PHY_MICREL=y
+CONFIG_PHY_MICREL_KSZ8XXX=y
CONFIG_DM_ETH=y
CONFIG_SH_ETHER=y
CONFIG_PCI=y
CONFIG_MTD_UBI_FASTMAP_AUTOCONVERT=1
CONFIG_PHYLIB=y
CONFIG_PHY_MICREL=y
+CONFIG_PHY_MICREL_KSZ8XXX=y
CONFIG_MII=y
CONFIG_SPI=y
CONFIG_MXC_SPI=y
CONFIG_SPI_FLASH_MTD=y
CONFIG_PHYLIB=y
CONFIG_PHY_MICREL=y
+CONFIG_PHY_MICREL_KSZ8XXX=y
CONFIG_DM_ETH=y
CONFIG_FEC_MXC=y
CONFIG_MII=y
CONFIG_FSL_ESDHC=y
CONFIG_PHYLIB=y
CONFIG_PHY_MICREL=y
+CONFIG_PHY_MICREL_KSZ8XXX=y
CONFIG_MII=y
CONFIG_PINCTRL=y
CONFIG_PINCTRL_IMX6=y
CONFIG_MTD_UBI_FASTMAP=y
CONFIG_PHYLIB=y
CONFIG_PHY_MICREL=y
+CONFIG_PHY_MICREL_KSZ8XXX=y
CONFIG_MII=y
CONFIG_PINCTRL=y
CONFIG_PINCTRL_IMX7=y
CONFIG_FSL_ESDHC=y
CONFIG_PHYLIB=y
CONFIG_PHY_MICREL=y
+CONFIG_PHY_MICREL_KSZ8XXX=y
CONFIG_MII=y
CONFIG_PINCTRL=y
CONFIG_PINCTRL_IMX7=y
CONFIG_MTD_UBI_FASTMAP=y
CONFIG_PHYLIB=y
CONFIG_PHY_MICREL=y
+CONFIG_PHY_MICREL_KSZ8XXX=y
CONFIG_DM_ETH=y
CONFIG_FEC_MXC=y
CONFIG_MII=y
CONFIG_NAND_MXC=y
CONFIG_PHYLIB=y
CONFIG_PHY_MICREL=y
+CONFIG_PHY_MICREL_KSZ8XXX=y
CONFIG_MII=y
CONFIG_SPI=y
CONFIG_MXC_SPI=y
CONFIG_SPI_FLASH_SPANSION=y
CONFIG_SPI_FLASH_MTD=y
CONFIG_PHY_MICREL=y
+CONFIG_PHY_MICREL_KSZ8XXX=y
CONFIG_DM_ETH=y
CONFIG_SH_ETHER=y
CONFIG_PCI=y
CONFIG_FSL_ESDHC=y
CONFIG_PHYLIB=y
CONFIG_PHY_MICREL=y
+CONFIG_PHY_MICREL_KSZ8XXX=y
CONFIG_FEC_MXC=y
CONFIG_MII=y
CONFIG_PINCTRL_IMX6=y
CONFIG_FSL_ESDHC=y
CONFIG_PHYLIB=y
CONFIG_PHY_MICREL=y
+CONFIG_PHY_MICREL_KSZ8XXX=y
CONFIG_FEC_MXC=y
CONFIG_MII=y
CONFIG_PINCTRL=y
CONFIG_PHYLIB=y
CONFIG_PHY_MARVELL=y
CONFIG_PHY_MICREL=y
+CONFIG_PHY_MICREL_KSZ8XXX=y
CONFIG_PHY_TI=y
CONFIG_DM_ETH=y
CONFIG_MII=y
CONFIG_PHYLIB=y
CONFIG_PHY_MARVELL=y
CONFIG_PHY_MICREL=y
+CONFIG_PHY_MICREL_KSZ8XXX=y
CONFIG_DM_ETH=y
CONFIG_MII=y
CONFIG_DRIVER_TI_KEYSTONE_NET=y
CONFIG_SPI_FLASH_SPANSION=y
CONFIG_SPI_FLASH_MTD=y
CONFIG_PHY_MICREL=y
+CONFIG_PHY_MICREL_KSZ8XXX=y
CONFIG_DM_ETH=y
CONFIG_SH_ETHER=y
CONFIG_PCI=y
CONFIG_SPI_FLASH_SPANSION=y
CONFIG_SPI_FLASH_MTD=y
CONFIG_PHY_MICREL=y
+CONFIG_PHY_MICREL_KSZ8XXX=y
CONFIG_DM_ETH=y
CONFIG_SH_ETHER=y
CONFIG_PCI=y
CONFIG_NAND_MXC=y
CONFIG_PHYLIB=y
CONFIG_PHY_MICREL=y
+CONFIG_PHY_MICREL_KSZ8XXX=y
CONFIG_RTC_M41T62=y
CONFIG_USB=y
CONFIG_USB_EHCI_MX5=y
CONFIG_SPI_FLASH_STMICRO=y
CONFIG_PHYLIB=y
CONFIG_PHY_MICREL=y
+CONFIG_PHY_MICREL_KSZ8XXX=y
CONFIG_DM_ETH=y
CONFIG_MII=y
CONFIG_PINCTRL=y
CONFIG_SPI_FLASH_STMICRO=y
CONFIG_PHYLIB=y
CONFIG_PHY_MICREL=y
+CONFIG_PHY_MICREL_KSZ8XXX=y
CONFIG_DM_ETH=y
CONFIG_MII=y
CONFIG_PINCTRL=y
CONFIG_FSL_ESDHC=y
CONFIG_PHYLIB=y
CONFIG_PHY_MICREL=y
+CONFIG_PHY_MICREL_KSZ8XXX=y
CONFIG_FEC_MXC=y
CONFIG_MII=y
CONFIG_PINCTRL=y
CONFIG_SPI_FLASH_MTD=y
CONFIG_PHYLIB=y
CONFIG_PHY_MICREL=y
+CONFIG_PHY_MICREL_KSZ8XXX=y
CONFIG_DM_ETH=y
CONFIG_FEC_MXC=y
CONFIG_MII=y
CONFIG_NAND_MXS_DT=y
CONFIG_PHYLIB=y
CONFIG_PHY_MICREL=y
+CONFIG_PHY_MICREL_KSZ8XXX=y
CONFIG_FEC_MXC=y
CONFIG_MII=y
CONFIG_PINCTRL=y
CONFIG_FSL_ESDHC=y
CONFIG_PHYLIB=y
CONFIG_PHY_MICREL=y
+CONFIG_PHY_MICREL_KSZ8XXX=y
CONFIG_MII=y
CONFIG_PINCTRL=y
CONFIG_PINCTRL_IMX6=y
CONFIG_FSL_ESDHC=y
CONFIG_PHYLIB=y
CONFIG_PHY_MICREL=y
+CONFIG_PHY_MICREL_KSZ8XXX=y
CONFIG_MII=y
CONFIG_PINCTRL=y
CONFIG_PINCTRL_IMX6=y
CONFIG_FSL_ESDHC=y
CONFIG_PHYLIB=y
CONFIG_PHY_MICREL=y
+CONFIG_PHY_MICREL_KSZ8XXX=y
CONFIG_MII=y
CONFIG_PINCTRL=y
CONFIG_PINCTRL_IMX6=y
CONFIG_SPI_FLASH_SPANSION=y
CONFIG_SPI_FLASH_MTD=y
CONFIG_PHY_MICREL=y
+CONFIG_PHY_MICREL_KSZ8XXX=y
CONFIG_DM_ETH=y
CONFIG_SH_ETHER=y
CONFIG_PCI=y
CONFIG_SPI_FLASH_SPANSION=y
CONFIG_SPI_FLASH_MTD=y
CONFIG_PHY_MICREL=y
+CONFIG_PHY_MICREL_KSZ8XXX=y
CONFIG_DM_ETH=y
CONFIG_SH_ETHER=y
CONFIG_PCI=y
CONFIG_SPI_FLASH_SPANSION=y
CONFIG_SPI_FLASH_MTD=y
CONFIG_PHY_MICREL=y
+CONFIG_PHY_MICREL_KSZ8XXX=y
CONFIG_DM_ETH=y
CONFIG_SH_ETHER=y
CONFIG_PCI=y
CONFIG_SPI_FLASH_STMICRO=y
CONFIG_SPI_FLASH_WINBOND=y
CONFIG_PHY_MICREL=y
+CONFIG_PHY_MICREL_KSZ8XXX=y
CONFIG_ETH_DESIGNWARE=y
CONFIG_MII=y
CONFIG_CADENCE_QSPI=y
CONFIG_FSL_ESDHC=y
CONFIG_PHYLIB=y
CONFIG_PHY_MICREL=y
+CONFIG_PHY_MICREL_KSZ8XXX=y
CONFIG_MII=y
CONFIG_OF_LIBFDT=y
CONFIG_SYS_NAND_BUSWIDTH_16BIT=y
CONFIG_PHYLIB=y
CONFIG_PHY_MICREL=y
+CONFIG_PHY_MICREL_KSZ8XXX=y
CONFIG_MII=y
CONFIG_DM_SERIAL=y
CONFIG_FSL_LPUART=y
CONFIG_SYS_NAND_BUSWIDTH_16BIT=y
CONFIG_PHYLIB=y
CONFIG_PHY_MICREL=y
+CONFIG_PHY_MICREL_KSZ8XXX=y
CONFIG_MII=y
CONFIG_DM_SERIAL=y
CONFIG_FSL_LPUART=y
CONFIG_NAND_MXC=y
CONFIG_PHYLIB=y
CONFIG_PHY_MICREL=y
+CONFIG_PHY_MICREL_KSZ8XXX=y
CONFIG_MII=y
CONFIG_SPI=y
CONFIG_MXC_SPI=y
CONFIG_NAND_MXC=y
CONFIG_PHYLIB=y
CONFIG_PHY_MICREL=y
+CONFIG_PHY_MICREL_KSZ8XXX=y
CONFIG_MII=y
CONFIG_SPI=y
CONFIG_MXC_SPI=y
bool "Micrel Ethernet PHYs support"
help
Enable support for the GbE PHYs manufactured by Micrel (now
- a part of Microchip). This includes drivers for the KSZ804,
- KSZ8031, KSZ8051, KSZ8081, KSZ8895, KSZ886x, KSZ8721
- either/or KSZ9021 (see the "Micrel KSZ9021 family support"
- config option for details), and KSZ9031 (if configured).
+ a part of Microchip). This includes drivers for the KSZ804, KSZ8031,
+ KSZ8051, KSZ8081, KSZ8895, KSZ886x and KSZ8721 (if "Micrel KSZ8xxx
+ family support" is selected) and the KSZ9021 and KSZ9031 (if "Micrel
+ KSZ90x1 family support" is selected).
if PHY_MICREL
config PHY_MICREL_KSZ9021
bool
- select PHY_GIGE
select PHY_MICREL_KSZ90X1
config PHY_MICREL_KSZ9031
bool
- select PHY_GIGE
select PHY_MICREL_KSZ90X1
config PHY_MICREL_KSZ90X1
delays configured in the device tree will be applied to the
PHY during initialization.
- This should not be enabled at the same time with PHY_MICREL_KSZ8XXX
- as the KSZ9021 and KS8721 share the same ID.
-
config PHY_MICREL_KSZ8XXX
bool "Micrel KSZ8xxx family support"
- default y if !PHY_MICREL_KSZ90X1
help
- Enable support for the 8000 series GbE PHYs manufactured by Micrel
+ Enable support for the 8000 series 10/100 PHYs manufactured by Micrel
(now a part of Microchip). This includes drivers for the KSZ804,
KSZ8031, KSZ8051, KSZ8081, KSZ8895, KSZ886x, and KSZ8721.
- This should not be enabled at the same time with PHY_MICREL_KSZ90X1
- as the KSZ9021 and KS8721 share the same ID.
-
endif # PHY_MICREL
config PHY_MSCC
.shutdown = &genphy_shutdown,
};
-/* Micrel used the exact same part number for the KSZ9021. */
+/* Micrel used the exact same model number for the KSZ9021,
+ * so the revision number is used to distinguish them.
+ */
static struct phy_driver KS8721_driver = {
.name = "Micrel KS8721BL",
- .uid = 0x221610,
- .mask = 0xfffff0,
+ .uid = 0x221618,
+ .mask = 0xfffffc,
.features = PHY_BASIC_FEATURES,
.config = &genphy_config,
.startup = &genphy_startup,
static struct phy_driver ksz9021_driver = {
.name = "Micrel ksz9021",
.uid = 0x221610,
- .mask = 0xfffff0,
+ .mask = 0xfffffe,
.features = PHY_GBIT_FEATURES,
.config = &ksz9021_config,
.startup = &ksz90xx_startup,