netstar.h: do not exceed 80 columns

Limit line length to 80 characters mostly by removing obvious and sometimes
misleading comments. Fix indentation, too.

Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>

diff --git a/include/configs/netstar.h b/include/configs/netstar.h
index edda3ce56e6eee74c8a00172e2da1ea8e23b36a4..c63c84650f044f500d492f7ddce07cdc2322ae73 100644 (file)
--- a/include/configs/netstar.h
+++ b/include/configs/netstar.h
@@ -27,17 +27,13 @@
 
 #include <configs/omap1510.h>
 
-/*
- * High Level Configuration Options
- * (easy to change)
- */
 #define CONFIG_ARM925T 1               /* This is an arm925t CPU */
 #define CONFIG_OMAP    1               /* in a TI OMAP core */
 #define CONFIG_OMAP1510 1              /* which is in a 5910 */
 
 /* Input clock of PLL */
-#define CONFIG_SYS_CLK_FREQ    150000000       /* 150MHz input clock */
-#define CONFIG_XTAL_FREQ       12000000
+#define CONFIG_SYS_CLK_FREQ            150000000       /* 150MHz */
+#define CONFIG_XTAL_FREQ               12000000        /*  12MHz */
 
 #undef CONFIG_USE_IRQ                  /* we don't need IRQ/FIQ stuff */
 
@@ -54,10 +50,10 @@
 /*
  * Physical Memory Map
  */
-#define CONFIG_NR_DRAM_BANKS   1               /* we have 1 bank of DRAM */
-#define PHYS_SDRAM_1           0x10000000      /* SDRAM Bank #1 */
-#define PHYS_SDRAM_1_SIZE      (64 * 1024 * 1024)
-#define PHYS_FLASH_1           0x00000000      /* Flash Bank #1 */
+#define CONFIG_NR_DRAM_BANKS           1
+#define PHYS_SDRAM_1                   0x10000000
+#define PHYS_SDRAM_1_SIZE              (64 * 1024 * 1024)
+#define PHYS_FLASH_1                   0x00000000
 
 #define CONFIG_SYS_MONITOR_BASE                PHYS_FLASH_1
 #define CONFIG_SYS_MONITOR_LEN         (256 * 1024)
@@ -66,23 +62,23 @@
  * Environment settings
  */
 #define CONFIG_ENV_IS_IN_FLASH
-#define CONFIG_ENV_ADDR                0x4000
-#define CONFIG_ENV_SIZE                (8 * 1024)
-#define CONFIG_ENV_SECT_SIZE   (8 * 1024)
-#define CONFIG_ENV_ADDR_REDUND 0x6000
-#define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE
+#define CONFIG_ENV_ADDR                        0x4000
+#define CONFIG_ENV_SIZE                        (8 * 1024)
+#define CONFIG_ENV_SECT_SIZE           (8 * 1024)
+#define CONFIG_ENV_ADDR_REDUND         0x6000
+#define CONFIG_ENV_SIZE_REDUND         CONFIG_ENV_SIZE
 #define CONFIG_ENV_OVERWRITE
 
 /*
  * Size of malloc() pool
  */
-#define CONFIG_SYS_GBL_DATA_SIZE       128     /* size in bytes reserved for initial data */
+#define CONFIG_SYS_GBL_DATA_SIZE       128
 #define CONFIG_SYS_MALLOC_LEN          (4 * 1024 * 1024)
 
 /*
  * The stack size is set up in start.S using the settings below
  */
-#define CONFIG_STACKSIZE       (1 * 1024 * 1024)       /* regular stack */
+#define CONFIG_STACKSIZE               (1 * 1024 * 1024)
 
 /*
  * Hardware drivers
@@ -90,8 +86,8 @@
 #define CONFIG_SYS_NS16550
 #define CONFIG_SYS_NS16550_SERIAL
 #define CONFIG_SYS_NS16550_REG_SIZE    (-4)
-#define CONFIG_SYS_NS16550_CLK         (CONFIG_XTAL_FREQ)      /* can be 12M/32Khz or 48Mhz  */
-#define CONFIG_SYS_NS16550_COM1                OMAP1510_UART1_BASE     /* uart1 */
+#define CONFIG_SYS_NS16550_CLK         (CONFIG_XTAL_FREQ)
+#define CONFIG_SYS_NS16550_COM1                OMAP1510_UART1_BASE
 
 #define CONFIG_NET_MULTI
 #define CONFIG_SMC91111
@@ -128,10 +124,10 @@
 /*#define CONFIG_SKIP_LOWLEVEL_INIT */
 
 /*
- * partitions (mtdparts command line support)
+ * Partitions (mtdparts command line support)
  */
 #define CONFIG_CMD_MTDPARTS
-#define CONFIG_MTD_DEVICE              /* needed for mtdparts commands */
+#define CONFIG_MTD_DEVICE
 #define CONFIG_FLASH_CFI_MTD
 #define MTDIDS_DEFAULT         "nor0=physmap-flash.0,nand0=gen_nand.0"
 #define MTDPARTS_DEFAULT       "mtdparts=" \
@@ -139,7 +135,7 @@
        "gen_nand.0:4M(kernel0),40M(rootfs0),4M(kernel1),40M(rootfs1),-(data)"
 
 /*
- * Command line configuration.
+ * Command line configuration
  */
 #define CONFIG_CMD_BDI
 #define CONFIG_CMD_BOOTD
@@ -204,12 +200,13 @@
 /*
  * Miscellaneous configurable options
  */
-#define CONFIG_SYS_LONGHELP                            /* undef to save memory         */
-#define CONFIG_SYS_PROMPT              "# "            /* Monitor Command Prompt       */
-#define CONFIG_SYS_CBSIZE              256             /* Console I/O Buffer Size      */
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
-#define CONFIG_SYS_MAXARGS             16              /* max number of command args   */
-#define CONFIG_SYS_BARGSIZE            CONFIG_SYS_CBSIZE       /* Boot Argument Buffer Size    */
+#define CONFIG_SYS_LONGHELP
+#define CONFIG_SYS_PROMPT              "# "
+#define CONFIG_SYS_CBSIZE              256
+#define CONFIG_SYS_PBSIZE              (CONFIG_SYS_CBSIZE + \
+        sizeof(CONFIG_SYS_PROMPT) + 16)
+#define CONFIG_SYS_MAXARGS             16
+#define CONFIG_SYS_BARGSIZE            CONFIG_SYS_CBSIZE
 
 #define CONFIG_SYS_HUSH_PARSER
 #define CONFIG_SYS_PROMPT_HUSH_PS2     "> "
@@ -217,9 +214,9 @@
 
 #define CONFIG_SYS_MEMTEST_START       PHYS_SDRAM_1
 #define CONFIG_SYS_MEMTEST_END         PHYS_SDRAM_1 + PHYS_SDRAM_1_SIZE - \
-                               (CONFIG_SYS_MONITOR_LEN + CONFIG_SYS_MALLOC_LEN + CONFIG_STACKSIZE)
+       (CONFIG_SYS_MONITOR_LEN + CONFIG_SYS_MALLOC_LEN + CONFIG_STACKSIZE)
 
-#define CONFIG_SYS_LOAD_ADDR           PHYS_SDRAM_1 + 0x400000 /* default load address */
+#define CONFIG_SYS_LOAD_ADDR           (PHYS_SDRAM_1 + 0x400000)
 
 /* The 1510 has 3 timers, they can be driven by the RefClk (12MHz) or by DPLL1.
  * This time is further subdivided by a local divisor.
@@ -228,9 +225,9 @@
 #define CONFIG_SYS_PTV                 7
 #define CONFIG_SYS_HZ                  1000
 
-#define OMAP5910_DPLL_DIV      1
-#define OMAP5910_DPLL_MUL      ((CONFIG_SYS_CLK_FREQ * \
-                                (1 << OMAP5910_DPLL_DIV)) / CONFIG_XTAL_FREQ)
+#define OMAP5910_DPLL_DIV              1
+#define OMAP5910_DPLL_MUL              \
+       ((CONFIG_SYS_CLK_FREQ * (1 << OMAP5910_DPLL_DIV)) / CONFIG_XTAL_FREQ)
 
 #define OMAP5910_ARM_PER_DIV   2       /* CKL/4 */
 #define OMAP5910_LCD_DIV       2       /* CKL/4 */
@@ -240,7 +237,7 @@
 #define OMAP5910_DSP_MMU_DIV   1       /* CKL/2 */
 #define OMAP5910_ARM_TIM_SEL   1       /* CKL used for MPU timers */
 
-#define OMAP5910_ARM_EN_CLK    0x03d6  /* 0000 0011 1101 0110b  Clock Enable */
+#define OMAP5910_ARM_EN_CLK    0x03d6  /* 0000 0011 1101 0110b */
 #define OMAP5910_ARM_CKCTL     ((OMAP5910_ARM_PER_DIV)  |      \
                                 (OMAP5910_LCD_DIV << 2) |      \
                                 (OMAP5910_ARM_DIV << 4) |      \