sunxi: Sync Bananapi M2+ device tree from Linux v5.0-rc1

As of commit aa8fee415f46 ("ARM: dts: sun8i: h3: Split out
non-SoC-specific parts of Bananapi M2 Plus") in the Linux kernel, the
device tree for the Bananapi M2+ has been split into a common dtsi file,
and an SoC-specific board device tree file that includes both the shared
dtsi file and the soc dtsi file. This was done to support both the H3
and H5 variants of the same board. This is similar to what was done for
the Libre Computer ALL-H3-CC in U-boot commit d7b17f1c24af ("sunxi: Split
out common board design for ALL-H3-CC device tree").

The newly split files are directly synced from Linux tag v5.0-rc1.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Reviewed-by: Jagan Teki <jagan@openedev.com>

diff --git a/arch/arm/dts/sun8i-h3-bananapi-m2-plus.dts b/arch/arm/dts/sun8i-h3-bananapi-m2-plus.dts
index 30540dc8e0c5fd5c5657ca7ad725769e316bd185..195a75da13f1b87f1c571227781f40a27f4ee488 100644 (file)
--- a/arch/arm/dts/sun8i-h3-bananapi-m2-plus.dts
+++ b/arch/arm/dts/sun8i-h3-bananapi-m2-plus.dts
@@ -42,195 +42,9 @@
 
 /dts-v1/;
 #include "sun8i-h3.dtsi"
-#include "sunxi-common-regulators.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
+#include "sunxi-bananapi-m2-plus.dtsi"
 
 / {
-       model = "Banana Pi BPI-M2-Plus";
+       model = "Banana Pi BPI-M2-Plus H3";
        compatible = "sinovoip,bpi-m2-plus", "allwinner,sun8i-h3";
-
-       aliases {
-               ethernet0 = &emac;
-               serial0 = &uart0;
-               serial1 = &uart1;
-       };
-
-       chosen {
-               stdout-path = "serial0:115200n8";
-       };
-
-       connector {
-               compatible = "hdmi-connector";
-               type = "a";
-
-               port {
-                       hdmi_con_in: endpoint {
-                               remote-endpoint = <&hdmi_out_con>;
-                       };
-               };
-       };
-
-       leds {
-               compatible = "gpio-leds";
-               pinctrl-names = "default";
-
-               pwr_led {
-                       label = "bananapi-m2-plus:red:pwr";
-                       gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>; /* PL10 */
-                       default-state = "on";
-               };
-       };
-
-       gpio_keys {
-               compatible = "gpio-keys";
-               pinctrl-names = "default";
-
-               sw4 {
-                       label = "power";
-                       linux,code = <BTN_0>;
-                       gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>;
-               };
-       };
-
-       reg_gmac_3v3: gmac-3v3 {
-                     compatible = "regulator-fixed";
-                     regulator-name = "gmac-3v3";
-                     regulator-min-microvolt = <3300000>;
-                     regulator-max-microvolt = <3300000>;
-                     startup-delay-us = <100000>;
-                     enable-active-high;
-                     gpio = <&pio 3 6 GPIO_ACTIVE_HIGH>;
-       };
-
-       wifi_pwrseq: wifi_pwrseq {
-               compatible = "mmc-pwrseq-simple";
-               pinctrl-names = "default";
-               reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */
-       };
-};
-
-&de {
-       status = "okay";
-};
-
-&ehci0 {
-       status = "okay";
-};
-
-&ehci1 {
-       status = "okay";
-};
-
-&ehci2 {
-       status = "okay";
-};
-
-&emac {
-       pinctrl-names = "default";
-       pinctrl-0 = <&emac_rgmii_pins>;
-       phy-supply = <&reg_gmac_3v3>;
-       phy-handle = <&ext_rgmii_phy>;
-       phy-mode = "rgmii";
-
-       status = "okay";
-};
-
-&external_mdio {
-       ext_rgmii_phy: ethernet-phy@1 {
-               compatible = "ethernet-phy-ieee802.3-c22";
-               reg = <0>;
-       };
-};
-
-&hdmi {
-       status = "okay";
-};
-
-&hdmi_out {
-       hdmi_out_con: endpoint {
-               remote-endpoint = <&hdmi_con_in>;
-       };
-};
-
-&ir {
-       pinctrl-names = "default";
-       pinctrl-0 = <&ir_pins_a>;
-       status = "okay";
-};
-
-&mmc0 {
-       vmmc-supply = <&reg_vcc3v3>;
-       bus-width = <4>;
-       cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
-       status = "okay";
-};
-
-&mmc1 {
-       vmmc-supply = <&reg_vcc3v3>;
-       vqmmc-supply = <&reg_vcc3v3>;
-       mmc-pwrseq = <&wifi_pwrseq>;
-       bus-width = <4>;
-       non-removable;
-       status = "okay";
-
-       brcmf: wifi@1 {
-               reg = <1>;
-               compatible = "brcm,bcm4329-fmac";
-               interrupt-parent = <&pio>;
-               interrupts = <6 10 IRQ_TYPE_LEVEL_LOW>; /* PG10 / EINT10 */
-               interrupt-names = "host-wake";
-       };
-};
-
-&mmc2 {
-       pinctrl-names = "default";
-       pinctrl-0 = <&mmc2_8bit_pins>;
-       vmmc-supply = <&reg_vcc3v3>;
-       vqmmc-supply = <&reg_vcc3v3>;
-       bus-width = <8>;
-       non-removable;
-       status = "okay";
-};
-
-&ohci0 {
-       status = "okay";
-};
-
-&ohci1 {
-       status = "okay";
-};
-
-&ohci2 {
-       status = "okay";
-};
-
-&reg_usb0_vbus {
-       gpio = <&pio 3 11 GPIO_ACTIVE_HIGH>; /* PD11 */
-       status = "okay";
-};
-
-&uart0 {
-       pinctrl-names = "default";
-       pinctrl-0 = <&uart0_pins_a>;
-       status = "okay";
-};
-
-&uart1 {
-       pinctrl-names = "default";
-       pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>;
-       status = "okay";
-};
-
-&usb_otg {
-       dr_mode = "otg";
-       status = "okay";
-};
-
-&usbphy {
-       usb0_id_det-gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; /* PL6 */
-       usb0_vbus-supply = <&reg_usb0_vbus>;
-       /* USB host VBUS is on as long as VCC-IO is on */
-       status = "okay";
 };

diff --git a/arch/arm/dts/sunxi-bananapi-m2-plus.dtsi b/arch/arm/dts/sunxi-bananapi-m2-plus.dtsi
new file mode 100644 (file)
index 0000000..3bed375
--- /dev/null
+++ b/arch/arm/dts/sunxi-bananapi-m2-plus.dtsi
@@ -0,0 +1,245 @@
+/*
+ * Copyright (C) 2016 Chen-Yu Tsai <wens@csie.org>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+       aliases {
+               ethernet0 = &emac;
+               serial0 = &uart0;
+               serial1 = &uart1;
+       };
+
+       chosen {
+               stdout-path = "serial0:115200n8";
+       };
+
+       connector {
+               compatible = "hdmi-connector";
+               type = "a";
+
+               port {
+                       hdmi_con_in: endpoint {
+                               remote-endpoint = <&hdmi_out_con>;
+                       };
+               };
+       };
+
+       leds {
+               compatible = "gpio-leds";
+               pinctrl-names = "default";
+
+               pwr_led {
+                       label = "bananapi-m2-plus:red:pwr";
+                       gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>; /* PL10 */
+                       default-state = "on";
+               };
+       };
+
+       gpio_keys {
+               compatible = "gpio-keys";
+               pinctrl-names = "default";
+
+               sw4 {
+                       label = "power";
+                       linux,code = <BTN_0>;
+                       gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>;
+               };
+       };
+
+       reg_gmac_3v3: gmac-3v3 {
+                     compatible = "regulator-fixed";
+                     regulator-name = "gmac-3v3";
+                     regulator-min-microvolt = <3300000>;
+                     regulator-max-microvolt = <3300000>;
+                     startup-delay-us = <100000>;
+                     enable-active-high;
+                     gpio = <&pio 3 6 GPIO_ACTIVE_HIGH>;
+       };
+
+       wifi_pwrseq: wifi_pwrseq {
+               compatible = "mmc-pwrseq-simple";
+               pinctrl-names = "default";
+               reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */
+               clocks = <&rtc 1>;
+               clock-names = "ext_clock";
+       };
+};
+
+&de {
+       status = "okay";
+};
+
+&ehci0 {
+       status = "okay";
+};
+
+&ehci1 {
+       status = "okay";
+};
+
+&ehci2 {
+       status = "okay";
+};
+
+&emac {
+       pinctrl-names = "default";
+       pinctrl-0 = <&emac_rgmii_pins>;
+       phy-supply = <&reg_gmac_3v3>;
+       phy-handle = <&ext_rgmii_phy>;
+       phy-mode = "rgmii";
+
+       status = "okay";
+};
+
+&external_mdio {
+       ext_rgmii_phy: ethernet-phy@1 {
+               compatible = "ethernet-phy-ieee802.3-c22";
+               reg = <1>;
+       };
+};
+
+&hdmi {
+       status = "okay";
+};
+
+&hdmi_out {
+       hdmi_out_con: endpoint {
+               remote-endpoint = <&hdmi_con_in>;
+       };
+};
+
+&ir {
+       pinctrl-names = "default";
+       pinctrl-0 = <&ir_pins_a>;
+       status = "okay";
+};
+
+&mmc0 {
+       vmmc-supply = <&reg_vcc3v3>;
+       bus-width = <4>;
+       cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
+       status = "okay";
+};
+
+&mmc1 {
+       vmmc-supply = <&reg_vcc3v3>;
+       vqmmc-supply = <&reg_vcc3v3>;
+       mmc-pwrseq = <&wifi_pwrseq>;
+       bus-width = <4>;
+       non-removable;
+       status = "okay";
+
+       brcmf: wifi@1 {
+               reg = <1>;
+               compatible = "brcm,bcm4329-fmac";
+               interrupt-parent = <&pio>;
+               interrupts = <6 10 IRQ_TYPE_LEVEL_LOW>; /* PG10 / EINT10 */
+               interrupt-names = "host-wake";
+       };
+};
+
+&mmc2 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&mmc2_8bit_pins>;
+       vmmc-supply = <&reg_vcc3v3>;
+       vqmmc-supply = <&reg_vcc3v3>;
+       bus-width = <8>;
+       non-removable;
+       status = "okay";
+};
+
+&ohci0 {
+       status = "okay";
+};
+
+&ohci1 {
+       status = "okay";
+};
+
+&ohci2 {
+       status = "okay";
+};
+
+&reg_usb0_vbus {
+       gpio = <&pio 3 11 GPIO_ACTIVE_HIGH>; /* PD11 */
+       status = "okay";
+};
+
+&uart0 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&uart0_pins_a>;
+       status = "okay";
+};
+
+&uart1 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>;
+       uart-has-rtscts;
+       status = "okay";
+
+       bluetooth {
+               compatible = "brcm,bcm43438-bt";
+               clocks = <&rtc 1>;
+               clock-names = "lpo";
+               vbat-supply = <&reg_vcc3v3>;
+               vddio-supply = <&reg_vcc3v3>;
+               device-wakeup-gpios = <&pio 6 13 GPIO_ACTIVE_HIGH>; /* PG13 */
+               host-wakeup-gpios = <&pio 6 11 GPIO_ACTIVE_HIGH>; /* PG11 */
+               shutdown-gpios = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */
+       };
+};
+
+&usb_otg {
+       dr_mode = "otg";
+       status = "okay";
+};
+
+&usbphy {
+       usb0_id_det-gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; /* PL6 */
+       usb0_vbus-supply = <&reg_usb0_vbus>;
+       /* USB host VBUS is on as long as VCC-IO is on */
+       status = "okay";
+};