sun6i: ehci: Add sun6i ehci support
authorHans de Goede <hdegoede@redhat.com>
Fri, 7 Nov 2014 13:51:12 +0000 (14:51 +0100)
committerHans de Goede <hdegoede@redhat.com>
Thu, 13 Nov 2014 13:49:02 +0000 (14:49 +0100)
Add support for the 2 ehci controllers found on the sun6i (A31) soc.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Ian Campbell <ijc@hellion.org.uk>
Acked-by: Marek Vasut <marex@denx.de>
arch/arm/include/asm/arch-sunxi/clock_sun4i.h
arch/arm/include/asm/arch-sunxi/clock_sun6i.h
arch/arm/include/asm/arch-sunxi/cpu.h
board/sunxi/Kconfig
configs/Mele_M9_defconfig
drivers/usb/host/ehci-sunxi.c
include/configs/sun6i.h

index 90af8e250699b835bbf94c080e798d9eaa575121..9dca800d7851a762de594e46ac92bc6354560de4 100644 (file)
@@ -262,5 +262,8 @@ struct sunxi_ccm_reg {
 #define CCM_USB_CTRL_PHY1_RST (0x1 << 1)
 #define CCM_USB_CTRL_PHY2_RST (0x1 << 2)
 #define CCM_USB_CTRL_PHYGATE (0x1 << 8)
+/* These 2 are sun6i only, define them as 0 on sun4i */
+#define CCM_USB_CTRL_PHY1_CLK 0
+#define CCM_USB_CTRL_PHY2_CLK 0
 
 #endif /* _SUNXI_CLOCK_SUN4I_H */
index 4992dbc5030cdeceba14da4ac155dcd09f7dc904..e16a7647ed9f711800e17ae06b98e54b838da429 100644 (file)
@@ -193,6 +193,10 @@ struct sunxi_ccm_reg {
 
 #define AXI_GATE_OFFSET_DRAM           0
 
+#define AHB_GATE_OFFSET_USB_OHCI1      30
+#define AHB_GATE_OFFSET_USB_OHCI0      29
+#define AHB_GATE_OFFSET_USB_EHCI1      27
+#define AHB_GATE_OFFSET_USB_EHCI0      26
 #define AHB_GATE_OFFSET_MCTL           14
 #define AHB_GATE_OFFSET_MMC3           11
 #define AHB_GATE_OFFSET_MMC2           10
@@ -205,6 +209,13 @@ struct sunxi_ccm_reg {
 
 #define CCM_MMC_CTRL_ENABLE (0x1 << 31)
 
+#define CCM_USB_CTRL_PHY1_RST (0x1 << 1)
+#define CCM_USB_CTRL_PHY2_RST (0x1 << 2)
+/* There is no global phy clk gate on sun6i, define as 0 */
+#define CCM_USB_CTRL_PHYGATE 0
+#define CCM_USB_CTRL_PHY1_CLK (0x1 << 9)
+#define CCM_USB_CTRL_PHY2_CLK (0x1 << 10)
+
 #define MDFS_CLK_DEFAULT               0x81000002 /* PLL6 / 3 */
 
 #define CCM_DRAMCLK_CFG_DIV0(x)                ((x - 1) << 8)
index 6550e5016328d9163eaf8b2489021fe05a270ac3..bdee89e87da7c95c01e00b6a67c5d18f0a09d0cd 100644 (file)
 #define SUNXI_MMC1_BASE                        0x01c10000
 #define SUNXI_MMC2_BASE                        0x01c11000
 #define SUNXI_MMC3_BASE                        0x01c12000
+#ifndef CONFIG_MACH_SUN6I
 #define SUNXI_USB0_BASE                        0x01c13000
 #define SUNXI_USB1_BASE                        0x01c14000
+#endif
 #define SUNXI_SS_BASE                  0x01c15000
 #define SUNXI_HDMI_BASE                        0x01c16000
 #define SUNXI_SPI2_BASE                        0x01c17000
 #define SUNXI_SATA_BASE                        0x01c18000
+#ifndef CONFIG_MACH_SUN6I
 #define SUNXI_PATA_BASE                        0x01c19000
 #define SUNXI_ACE_BASE                 0x01c1a000
 #define SUNXI_TVE1_BASE                        0x01c1b000
 #define SUNXI_USB2_BASE                        0x01c1c000
+#else
+#define SUNXI_USB0_BASE                        0x01c19000
+#define SUNXI_USB1_BASE                        0x01c1a000
+#define SUNXI_USB2_BASE                        0x01c1b000
+#endif
 #define SUNXI_CSI1_BASE                        0x01c1d000
 #define SUNXI_TZASC_BASE               0x01c1e000
 #define SUNXI_SPI3_BASE                        0x01c1f000
index b2beea07e08e35a47096f2901d3842a5ea2a3158..c3f865d2983e89fb8ecc2e25ff6ab1469d8c7a53 100644 (file)
@@ -200,6 +200,7 @@ config MMC_SUNXI_SLOT_EXTRA
 config USB1_VBUS_PIN
        string "Vbus enable pin for usb1 (ehci0)"
        default "PH6" if MACH_SUN4I || MACH_SUN7I
+       default "PH27" if MACH_SUN6I
        ---help---
        Set the Vbus enable pin for usb1 (ehci0, usb0 is the otg). This takes
        a string in the format understood by sunxi_name_to_gpio, e.g.
@@ -208,6 +209,7 @@ config USB1_VBUS_PIN
 config USB2_VBUS_PIN
        string "Vbus enable pin for usb2 (ehci1)"
        default "PH3" if MACH_SUN4I || MACH_SUN7I
+       default "PH24" if MACH_SUN6I
        ---help---
        See USB1_VBUS_PIN help text.
 
index 3dacb198baf4da7db52825f48cf71e6845a5ef0a..f46439fa4e8bb91d4d0b90827d82869a6c9b640d 100644 (file)
@@ -1,4 +1,5 @@
 CONFIG_SPL=y
+CONFIG_SYS_EXTRA_OPTIONS="USB_EHCI"
 CONFIG_FDTFILE="sun6i-a31-m9.dtb"
 +S:CONFIG_ARM=y
 +S:CONFIG_ARCH_SUNXI=y
@@ -13,3 +14,5 @@ CONFIG_FDTFILE="sun6i-a31-m9.dtb"
 # HDMI power ?
 +S:CONFIG_AXP221_ALDO2_VOLT=1800
 +S:CONFIG_AXP221_ALDO3_VOLT=3000
+# No Vbus gpio for usb1
++S:CONFIG_USB1_VBUS_PIN=""
index 193ac433c1d575ac44e7981968f07e81c3656976..cc9a8fa71ef3e35139024a11515eb9251a7e38c0 100644 (file)
  */
 
 #include <asm/arch/clock.h>
+#include <asm/arch/cpu.h>
 #include <asm/gpio.h>
 #include <asm/io.h>
 #include <common.h>
 #include "ehci.h"
 
-#define SUNXI_USB1_IO_BASE             0x01c14000
-#define SUNXI_USB2_IO_BASE             0x01c1c000
-
 #define SUNXI_USB_PMU_IRQ_ENABLE       0x800
-#define SUNXI_USB_CSR                  0x01c13404
+#define SUNXI_USB_CSR                  0x404
 #define SUNXI_USB_PASSBY_EN            1
 
 #define SUNXI_EHCI_AHB_ICHR8_EN                (1 << 10)
@@ -32,23 +30,28 @@ static struct sunxi_ehci_hcd {
        int usb_rst_mask;
        int ahb_clk_mask;
        int gpio_vbus;
-       void *csr;
        int irq;
        int id;
 } sunxi_echi_hcd[] = {
        {
-               .usb_rst_mask = CCM_USB_CTRL_PHY1_RST,
+               .usb_rst_mask = CCM_USB_CTRL_PHY1_RST | CCM_USB_CTRL_PHY1_CLK,
                .ahb_clk_mask = 1 << AHB_GATE_OFFSET_USB_EHCI0,
-               .csr = (void *)SUNXI_USB_CSR,
+#ifndef CONFIG_MACH_SUN6I
                .irq = 39,
+#else
+               .irq = 72,
+#endif
                .id = 1,
        },
 #if (CONFIG_USB_MAX_CONTROLLER_COUNT > 1)
        {
-               .usb_rst_mask = CCM_USB_CTRL_PHY2_RST,
+               .usb_rst_mask = CCM_USB_CTRL_PHY2_RST | CCM_USB_CTRL_PHY2_CLK,
                .ahb_clk_mask = 1 << AHB_GATE_OFFSET_USB_EHCI1,
-               .csr = (void *)SUNXI_USB_CSR,
+#ifndef CONFIG_MACH_SUN6I
                .irq = 40,
+#else
+               .irq = 74,
+#endif
                .id = 2,
        }
 #endif
@@ -58,12 +61,16 @@ static int enabled_hcd_count;
 
 static void *get_io_base(int hcd_id)
 {
-       if (hcd_id == 1)
-               return (void *)SUNXI_USB1_IO_BASE;
-       else if (hcd_id == 2)
-               return (void *)SUNXI_USB2_IO_BASE;
-       else
+       switch (hcd_id) {
+       case 0:
+               return (void *)SUNXI_USB0_BASE;
+       case 1:
+               return (void *)SUNXI_USB1_BASE;
+       case 2:
+               return (void *)SUNXI_USB2_BASE;
+       default:
                return NULL;
+       }
 }
 
 static int get_vbus_gpio(int hcd_id)
@@ -79,7 +86,7 @@ static void usb_phy_write(struct sunxi_ehci_hcd *sunxi_ehci, int addr,
                          int data, int len)
 {
        int j = 0, usbc_bit = 0;
-       void *dest = sunxi_ehci->csr;
+       void *dest = get_io_base(0) + SUNXI_USB_CSR;
 
        usbc_bit = 1 << (sunxi_ehci->id * 2);
        for (j = 0; j < len; j++) {
@@ -112,7 +119,7 @@ static void sunxi_usb_phy_init(struct sunxi_ehci_hcd *sunxi_ehci)
        usb_phy_write(sunxi_ehci, 0x20, 0x14, 5);
 
        /* threshold adjustment disconnect */
-#ifdef CONFIG_MACH_SUN4I
+#if defined CONFIG_MACH_SUN4I || defined CONFIG_MACH_SUN6I
        usb_phy_write(sunxi_ehci, 0x2a, 3, 2);
 #else
        usb_phy_write(sunxi_ehci, 0x2a, 2, 2);
@@ -145,6 +152,9 @@ static void sunxi_ehci_enable(struct sunxi_ehci_hcd *sunxi_ehci)
 
        setbits_le32(&ccm->usb_clk_cfg, sunxi_ehci->usb_rst_mask);
        setbits_le32(&ccm->ahb_gate0, sunxi_ehci->ahb_clk_mask);
+#ifdef CONFIG_MACH_SUN6I
+       setbits_le32(&ccm->ahb_reset0_cfg, sunxi_ehci->ahb_clk_mask);
+#endif
 
        sunxi_usb_phy_init(sunxi_ehci);
 
@@ -163,6 +173,9 @@ static void sunxi_ehci_disable(struct sunxi_ehci_hcd *sunxi_ehci)
 
        sunxi_usb_passby(sunxi_ehci, !SUNXI_USB_PASSBY_EN);
 
+#ifdef CONFIG_MACH_SUN6I
+       clrbits_le32(&ccm->ahb_reset0_cfg, sunxi_ehci->ahb_clk_mask);
+#endif
        clrbits_le32(&ccm->ahb_gate0, sunxi_ehci->ahb_clk_mask);
        clrbits_le32(&ccm->usb_clk_cfg, sunxi_ehci->usb_rst_mask);
 }
index 955877151534b889d0059e6233dd9fb42fbcd634..1b738527990972e112a487e9e02ab3031625a6ae 100644 (file)
 
 #define CONFIG_SYS_PROMPT              "sun6i# "
 
+#ifdef CONFIG_USB_EHCI
+#define CONFIG_USB_EHCI_SUNXI
+#define CONFIG_USB_MAX_CONTROLLER_COUNT        2
+#endif
+
 /*
  * Include common sunxi configuration where most the settings are
  */