rockchip: Enable PCIe/M.2 on rk3399 board w/ M.2
authorJagan Teki <jagan@amarulasolutions.com>
Sat, 9 May 2020 16:56:23 +0000 (22:26 +0530)
committerKever Yang <kever.yang@rock-chips.com>
Fri, 22 May 2020 12:53:20 +0000 (20:53 +0800)
Enable PCIe/M.2 support on
- NanoPC-T4
- ROC-RK3399-PC Mezzanine boards.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Tested-by: Suniel Mahesh <sunil@amarulasolutions.com> #roc-rk3399-pc
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
arch/arm/dts/rk3399-u-boot.dtsi
configs/nanopc-t4-rk3399_defconfig
configs/roc-pc-mezzanine-rk3399_defconfig

index 22017ecd60da0606f8d0a9bb58b55a23aa464b7a..8237782408528d6008844d2747484250f340866b 100644 (file)
@@ -8,6 +8,7 @@
        aliases {
                mmc0 = &sdhci;
                mmc1 = &sdmmc;
+               pci0 = &pcie0;
        };
 
        cic: syscon@ff620000 {
index ae865908d815abc5279fcacb5f8ebc2ae13db79f..3bb5b498f2b3066855b7becddc727e3784e358b8 100644 (file)
@@ -18,6 +18,7 @@ CONFIG_CMD_BOOTZ=y
 CONFIG_CMD_GPT=y
 CONFIG_CMD_MMC=y
 CONFIG_CMD_USB=y
+CONFIG_CMD_PCI=y
 # CONFIG_CMD_SETEXPR is not set
 CONFIG_CMD_TIME=y
 CONFIG_SPL_OF_CONTROL=y
@@ -34,10 +35,13 @@ CONFIG_MMC_SDHCI_ROCKCHIP=y
 CONFIG_DM_ETH=y
 CONFIG_ETH_DESIGNWARE=y
 CONFIG_GMAC_ROCKCHIP=y
+CONFIG_NVME=y
+CONFIG_PCI=y
 CONFIG_PMIC_RK8XX=y
 CONFIG_REGULATOR_PWM=y
 CONFIG_REGULATOR_RK8XX=y
 CONFIG_PWM_ROCKCHIP=y
+CONFIG_DM_RESET=y
 CONFIG_BAUDRATE=1500000
 CONFIG_DEBUG_UART_SHIFT=2
 CONFIG_SYSRESET=y
index 1879944bc5e71db1a34e4f5f841d39aec419f173..7f55307676773692919cc7463aa80009e5a92733 100644 (file)
@@ -19,6 +19,7 @@ CONFIG_CMD_BOOTZ=y
 CONFIG_CMD_GPT=y
 CONFIG_CMD_MMC=y
 CONFIG_CMD_USB=y
+CONFIG_CMD_PCI=y
 # CONFIG_CMD_SETEXPR is not set
 CONFIG_CMD_TIME=y
 CONFIG_SPL_OF_CONTROL=y
@@ -36,11 +37,14 @@ CONFIG_SPI_FLASH_WINBOND=y
 CONFIG_DM_ETH=y
 CONFIG_ETH_DESIGNWARE=y
 CONFIG_GMAC_ROCKCHIP=y
+CONFIG_NVME=y
+CONFIG_PCI=y
 CONFIG_PMIC_RK8XX=y
 CONFIG_REGULATOR_PWM=y
 CONFIG_REGULATOR_RK8XX=y
 CONFIG_PWM_ROCKCHIP=y
 CONFIG_RAM_RK3399_LPDDR4=y
+CONFIG_DM_RESET=y
 CONFIG_BAUDRATE=1500000
 CONFIG_DEBUG_UART_SHIFT=2
 CONFIG_ROCKCHIP_SPI=y