CREG GPIO: add device tree bindings

Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>

diff --git a/MAINTAINERS b/MAINTAINERS
index fe8423530c10c04287c47c52a1870e5156436737..1bd583c9753d0ef072ba74b2f65d145238eb3208 100644 (file)
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -74,6 +74,7 @@ ARC HSDK CREG GPIO
 M:     Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
 S:     Maintained
 L:     uboot-snps-arc@synopsys.com
+F:     doc/device-tree-bindings/gpio/snps,creg-gpio.txt
 F:     drivers/gpio/hsdk-creg-gpio.c
 
 ARM

diff --git a/doc/device-tree-bindings/gpio/snps,creg-gpio.txt b/doc/device-tree-bindings/gpio/snps,creg-gpio.txt
new file mode 100644 (file)
index 0000000..46ceb65
--- /dev/null
+++ b/doc/device-tree-bindings/gpio/snps,creg-gpio.txt
@@ -0,0 +1,43 @@
+GPIO via CREG (control registers) driver
+
+31                 9        7        5           0   < bit number
+|                  |        |        |           |
+[     not used     | gpio-1 | gpio-0 | <-shift-> ]   < 32 bit register
+                       ^        ^
+                       |        |
+                write 0x2 == set output to "1" (activate)
+                write 0x3 == set output to "0" (deactivate)
+
+Required properties:
+- compatible : "snps,creg-gpio"
+- reg : Exactly one register range with length 0x4.
+- #gpio-cells : Should be one - the pin number.
+- gpio-controller : Marks the device node as a GPIO controller.
+- gpio-count: Number of GPIO pins.
+- gpio-bit-per-line: Number of bits per gpio line (see picture).
+- gpio-first-shift: Shift (in bits) of the first GPIO field in register
+  (see picture).
+- gpio-activate-val: Value should be set in corresponding field to set
+  output to "1" (see picture). Applied to all GPIO ports.
+- gpio-deactivate-val: Value should be set in corresponding field to set
+  output to "0" (see picture). Applied to all GPIO ports.
+
+Optional properties:
+- gpio-bank-name: name of bank (as default driver name is used is used)
+- gpio-default-val: array of default output values (must me 0 or 1)
+
+Example (see picture):
+
+gpio: gpio@f00014b0 {
+       compatible = "snps,creg-gpio";
+       reg = <0xf00014b0 0x4>;
+       gpio-controller;
+       #gpio-cells = <1>;
+       gpio-bank-name = "hsdk-spi-cs";
+       gpio-count = <2>;
+       gpio-first-shift = <5>;
+       gpio-bit-per-line = <2>;
+       gpio-activate-val = <2>;
+       gpio-deactivate-val = <3>;
+       gpio-default-val = <1 1>;
+};