#########################################################################
LIST_pxa=" \
- adsvix \
cerf250 \
cradle \
csb226 \
actux4_config : unconfig
@$(MKCONFIG) $(@:_config=) arm ixp actux4
-adsvix_config : unconfig
- @$(MKCONFIG) $(@:_config=) arm pxa adsvix
-
cerf250_config : unconfig
@$(MKCONFIG) $(@:_config=) arm pxa cerf250
+++ /dev/null
-#
-# (C) Copyright 2000-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-LIB = $(obj)lib$(BOARD).a
-
-COBJS := adsvix.o pcmcia.o
-SOBJS := lowlevel_init.o pxavoltage.o
-
-SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS := $(addprefix $(obj),$(COBJS))
-SOBJS := $(addprefix $(obj),$(SOBJS))
-
-$(LIB): $(obj).depend $(OBJS) $(SOBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
-
-clean:
- rm -f $(SOBJS) $(OBJS)
-
-distclean: clean
- rm -f $(LIB) core *.bak $(obj).depend
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
+++ /dev/null
-/*
- * (C) Copyright 2004
- * Robert Whaley, Applied Data Systems, Inc. rwhaley@applieddata.net
- *
- * (C) Copyright 2002
- * Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net
- *
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Marius Groeger <mgroeger@sysgo.de>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-/* ------------------------------------------------------------------------- */
-
-/*
- * Miscelaneous platform dependent initialisations
- */
-
-int board_init (void)
-{
- /* memory and cpu-speed are setup before relocation */
- /* so we do _nothing_ here */
-
- /* arch number of ADSVIX-Board */
- gd->bd->bi_arch_number = 620;
-
- /* adress of boot parameters */
- gd->bd->bi_boot_params = 0xa000003c;
-
- return 0;
-}
-
-int board_late_init(void)
-{
- setenv("stdout", "serial");
- setenv("stderr", "serial");
- return 0;
-}
-
-
-int dram_init (void)
-{
- gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
- gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
- gd->bd->bi_dram[1].start = PHYS_SDRAM_2;
- gd->bd->bi_dram[1].size = PHYS_SDRAM_2_SIZE;
- gd->bd->bi_dram[2].start = PHYS_SDRAM_3;
- gd->bd->bi_dram[2].size = PHYS_SDRAM_3_SIZE;
- gd->bd->bi_dram[3].start = PHYS_SDRAM_4;
- gd->bd->bi_dram[3].size = PHYS_SDRAM_4_SIZE;
-
- return 0;
-}
+++ /dev/null
-TEXT_BASE = 0xa1700000
+++ /dev/null
-/*
- * This was originally from the Lubbock u-boot port.
- *
- * Most of this taken from Redboot hal_platform_setup.h with cleanup
- *
- * NOTE: I haven't clean this up considerably, just enough to get it
- * running. See hal_platform_setup.h for the source. See
- * board/cradle/lowlevel_init.S for another PXA250 setup that is
- * much cleaner.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <config.h>
-#include <version.h>
-#include <asm/arch/pxa-regs.h>
-
-/* wait for coprocessor write complete */
- .macro CPWAIT reg
- mrc p15,0,\reg,c2,c0,0
- mov \reg,\reg
- sub pc,pc,#4
- .endm
-
-
-/*
- * Memory setup
- */
-
-.globl lowlevel_init
-lowlevel_init:
-
- /* Set up GPIO pins first ----------------------------------------- */
-
- ldr r0, =GPSR0
- ldr r1, =CFG_GPSR0_VAL
- str r1, [r0]
-
- ldr r0, =GPSR1
- ldr r1, =CFG_GPSR1_VAL
- str r1, [r0]
-
- ldr r0, =GPSR2
- ldr r1, =CFG_GPSR2_VAL
- str r1, [r0]
-
- ldr r0, =GPSR3
- ldr r1, =CFG_GPSR3_VAL
- str r1, [r0]
-
- ldr r0, =GPCR0
- ldr r1, =CFG_GPCR0_VAL
- str r1, [r0]
-
- ldr r0, =GPCR1
- ldr r1, =CFG_GPCR1_VAL
- str r1, [r0]
-
- ldr r0, =GPCR2
- ldr r1, =CFG_GPCR2_VAL
- str r1, [r0]
-
- ldr r0, =GPCR3
- ldr r1, =CFG_GPCR3_VAL
- str r1, [r0]
-
- ldr r0, =GPDR0
- ldr r1, =CFG_GPDR0_VAL
- str r1, [r0]
-
- ldr r0, =GPDR1
- ldr r1, =CFG_GPDR1_VAL
- str r1, [r0]
-
- ldr r0, =GPDR2
- ldr r1, =CFG_GPDR2_VAL
- str r1, [r0]
-
- ldr r0, =GPDR3
- ldr r1, =CFG_GPDR3_VAL
- str r1, [r0]
-
- ldr r0, =GAFR0_L
- ldr r1, =CFG_GAFR0_L_VAL
- str r1, [r0]
-
- ldr r0, =GAFR0_U
- ldr r1, =CFG_GAFR0_U_VAL
- str r1, [r0]
-
- ldr r0, =GAFR1_L
- ldr r1, =CFG_GAFR1_L_VAL
- str r1, [r0]
-
- ldr r0, =GAFR1_U
- ldr r1, =CFG_GAFR1_U_VAL
- str r1, [r0]
-
- ldr r0, =GAFR2_L
- ldr r1, =CFG_GAFR2_L_VAL
- str r1, [r0]
-
- ldr r0, =GAFR2_U
- ldr r1, =CFG_GAFR2_U_VAL
- str r1, [r0]
-
- ldr r0, =GAFR3_L
- ldr r1, =CFG_GAFR3_L_VAL
- str r1, [r0]
-
- ldr r0, =GAFR3_U
- ldr r1, =CFG_GAFR3_U_VAL
- str r1, [r0]
-
- ldr r0, =PSSR /* enable GPIO pins */
- ldr r1, =CFG_PSSR_VAL
- str r1, [r0]
-
- /* ---------------------------------------------------------------- */
- /* Enable memory interface */
- /* */
- /* The sequence below is based on the recommended init steps */
- /* detailed in the Intel PXA250 Operating Systems Developers Guide, */
- /* Chapter 10. */
- /* ---------------------------------------------------------------- */
-
- /* ---------------------------------------------------------------- */
- /* Step 1: Wait for at least 200 microsedonds to allow internal */
- /* clocks to settle. Only necessary after hard reset... */
- /* FIXME: can be optimized later */
- /* ---------------------------------------------------------------- */
-
- ldr r3, =OSCR /* reset the OS Timer Count to zero */
- mov r2, #0
- str r2, [r3]
- ldr r4, =0x300 /* really 0x2E1 is about 200usec, */
- /* so 0x300 should be plenty */
-1:
- ldr r2, [r3]
- cmp r4, r2
- bgt 1b
-
-mem_init:
-
- ldr r1, =MEMC_BASE /* get memory controller base addr. */
-
- /* ---------------------------------------------------------------- */
- /* Step 2a: Initialize Asynchronous static memory controller */
- /* ---------------------------------------------------------------- */
-
- /* MSC registers: timing, bus width, mem type */
-
- /* MSC0: nCS(0,1) */
- ldr r2, =CFG_MSC0_VAL
- str r2, [r1, #MSC0_OFFSET]
- ldr r2, [r1, #MSC0_OFFSET] /* read back to ensure */
- /* that data latches */
- /* MSC1: nCS(2,3) */
- ldr r2, =CFG_MSC1_VAL
- str r2, [r1, #MSC1_OFFSET]
- ldr r2, [r1, #MSC1_OFFSET]
-
- /* MSC2: nCS(4,5) */
- ldr r2, =CFG_MSC2_VAL
- str r2, [r1, #MSC2_OFFSET]
- ldr r2, [r1, #MSC2_OFFSET]
-
- /* ---------------------------------------------------------------- */
- /* Step 2b: Initialize Card Interface */
- /* ---------------------------------------------------------------- */
-
- /* MECR: Memory Expansion Card Register */
- ldr r2, =CFG_MECR_VAL
- str r2, [r1, #MECR_OFFSET]
- ldr r2, [r1, #MECR_OFFSET]
-
- /* MCMEM0: Card Interface slot 0 timing */
- ldr r2, =CFG_MCMEM0_VAL
- str r2, [r1, #MCMEM0_OFFSET]
- ldr r2, [r1, #MCMEM0_OFFSET]
-
- /* MCMEM1: Card Interface slot 1 timing */
- ldr r2, =CFG_MCMEM1_VAL
- str r2, [r1, #MCMEM1_OFFSET]
- ldr r2, [r1, #MCMEM1_OFFSET]
-
- /* MCATT0: Card Interface Attribute Space Timing, slot 0 */
- ldr r2, =CFG_MCATT0_VAL
- str r2, [r1, #MCATT0_OFFSET]
- ldr r2, [r1, #MCATT0_OFFSET]
-
- /* MCATT1: Card Interface Attribute Space Timing, slot 1 */
- ldr r2, =CFG_MCATT1_VAL
- str r2, [r1, #MCATT1_OFFSET]
- ldr r2, [r1, #MCATT1_OFFSET]
-
- /* MCIO0: Card Interface I/O Space Timing, slot 0 */
- ldr r2, =CFG_MCIO0_VAL
- str r2, [r1, #MCIO0_OFFSET]
- ldr r2, [r1, #MCIO0_OFFSET]
-
- /* MCIO1: Card Interface I/O Space Timing, slot 1 */
- ldr r2, =CFG_MCIO1_VAL
- str r2, [r1, #MCIO1_OFFSET]
- ldr r2, [r1, #MCIO1_OFFSET]
-
- /* ---------------------------------------------------------------- */
- /* Step 2c: Write FLYCNFG FIXME: what's that??? */
- /* ---------------------------------------------------------------- */
- ldr r2, =CFG_FLYCNFG_VAL
- str r2, [r1, #FLYCNFG_OFFSET]
- str r2, [r1, #FLYCNFG_OFFSET]
-
- /* ---------------------------------------------------------------- */
- /* Step 2d: Initialize Timing for Sync Memory (SDCLK0) */
- /* ---------------------------------------------------------------- */
-
- /* Before accessing MDREFR we need a valid DRI field, so we set */
- /* this to power on defaults + DRI field. */
-
- ldr r4, [r1, #MDREFR_OFFSET]
- ldr r2, =0xFFF
- bic r4, r4, r2
-
- ldr r3, =CFG_MDREFR_VAL
- and r3, r3, r2
-
- orr r4, r4, r3
- str r4, [r1, #MDREFR_OFFSET] /* write back MDREFR */
-
- orr r4, r4, #MDREFR_K0RUN
- orr r4, r4, #MDREFR_K0DB4
- orr r4, r4, #MDREFR_K0FREE
- orr r4, r4, #MDREFR_K0DB2
- orr r4, r4, #MDREFR_K1DB2
- bic r4, r4, #MDREFR_K1FREE
- bic r4, r4, #MDREFR_K2FREE
-
- str r4, [r1, #MDREFR_OFFSET] /* write back MDREFR */
- ldr r4, [r1, #MDREFR_OFFSET]
-
- /* Note: preserve the mdrefr value in r4 */
-
-
- /* ---------------------------------------------------------------- */
- /* Step 3: Initialize Synchronous Static Memory (Flash/Peripherals) */
- /* ---------------------------------------------------------------- */
-
- /* Initialize SXCNFG register. Assert the enable bits */
-
- /* Write SXMRS to cause an MRS command to all enabled banks of */
- /* synchronous static memory. Note that SXLCR need not be written */
- /* at this time. */
-
- ldr r2, =CFG_SXCNFG_VAL
- str r2, [r1, #SXCNFG_OFFSET]
-
- /* ---------------------------------------------------------------- */
- /* Step 4: Initialize SDRAM */
- /* ---------------------------------------------------------------- */
-
- bic r4, r4, #(MDREFR_K2FREE |MDREFR_K1FREE | MDREFR_K0FREE)
-
- orr r4, r4, #MDREFR_K1RUN
- bic r4, r4, #MDREFR_K2DB2
- str r4, [r1, #MDREFR_OFFSET]
- ldr r4, [r1, #MDREFR_OFFSET]
-
- bic r4, r4, #MDREFR_SLFRSH
- str r4, [r1, #MDREFR_OFFSET]
- ldr r4, [r1, #MDREFR_OFFSET]
-
- orr r4, r4, #MDREFR_E1PIN
- str r4, [r1, #MDREFR_OFFSET]
- ldr r4, [r1, #MDREFR_OFFSET]
-
- nop
- nop
-
-
- /* Step 4d: write MDCNFG with MDCNFG:DEx deasserted (set to 0), to */
- /* configure but not enable each SDRAM partition pair. */
-
- ldr r4, =CFG_MDCNFG_VAL
- bic r4, r4, #(MDCNFG_DE0|MDCNFG_DE1)
- bic r4, r4, #(MDCNFG_DE2|MDCNFG_DE3)
-
- str r4, [r1, #MDCNFG_OFFSET] /* write back MDCNFG */
- ldr r4, [r1, #MDCNFG_OFFSET]
-
-
- /* Step 4e: Wait for the clock to the SDRAMs to stabilize, */
- /* 100..200 µsec. */
-
- ldr r3, =OSCR /* reset the OS Timer Count to zero */
- mov r2, #0
- str r2, [r3]
- ldr r4, =0x300 /* really 0x2E1 is about 200usec, */
- /* so 0x300 should be plenty */
-1:
- ldr r2, [r3]
- cmp r4, r2
- bgt 1b
-
-
- /* Step 4f: Trigger a number (usually 8) refresh cycles by */
- /* attempting non-burst read or write accesses to disabled */
- /* SDRAM, as commonly specified in the power up sequence */
- /* documented in SDRAM data sheets. The address(es) used */
- /* for this purpose must not be cacheable. */
-
- ldr r3, =CFG_DRAM_BASE
- str r2, [r3]
- str r2, [r3]
- str r2, [r3]
- str r2, [r3]
- str r2, [r3]
- str r2, [r3]
- str r2, [r3]
- str r2, [r3]
-
-
- /* Step 4g: Write MDCNFG with enable bits asserted */
- /* (MDCNFG:DEx set to 1). */
-
- ldr r3, [r1, #MDCNFG_OFFSET]
- mov r4, r3
- orr r3, r3, #MDCNFG_DE0
- str r3, [r1, #MDCNFG_OFFSET]
- mov r0, r3
-
- /* Step 4h: Write MDMRS. */
-
- ldr r2, =CFG_MDMRS_VAL
- str r2, [r1, #MDMRS_OFFSET]
-
- /* enable APD */
- ldr r3, [r1, #MDREFR_OFFSET]
- orr r3, r3, #MDREFR_APD
- str r3, [r1, #MDREFR_OFFSET]
-
- /* We are finished with Intel's memory controller initialisation */
-
-setvoltage:
-
- mov r10, lr
- bl initPXAvoltage /* In case the board is rebooting with a */
- mov lr, r10 /* low voltage raise it up to a good one. */
-
-wakeup:
- /* Are we waking from sleep? */
- ldr r0, =RCSR
- ldr r1, [r0]
- and r1, r1, #(RCSR_GPR | RCSR_SMR | RCSR_WDR | RCSR_HWR)
- str r1, [r0]
- teq r1, #RCSR_SMR
-
- bne initirqs
-
- ldr r0, =PSSR
- mov r1, #PSSR_PH
- str r1, [r0]
-
- /* if so, resume at PSPR */
- ldr r0, =PSPR
- ldr r1, [r0]
- mov pc, r1
-
- /* ---------------------------------------------------------------- */
- /* Disable (mask) all interrupts at interrupt controller */
- /* ---------------------------------------------------------------- */
-
-initirqs:
-
- mov r1, #0 /* clear int. level register (IRQ, not FIQ) */
- ldr r2, =ICLR
- str r1, [r2]
-
- ldr r2, =ICMR /* mask all interrupts at the controller */
- str r1, [r2]
-
- /* ---------------------------------------------------------------- */
- /* Clock initialisation */
- /* ---------------------------------------------------------------- */
-
-initclks:
-
- /* Disable the peripheral clocks, and set the core clock frequency */
-
- /* Turn Off on-chip peripheral clocks (except for memory) */
- /* for re-configuration. */
- ldr r1, =CKEN
- ldr r2, =CFG_CKEN
- str r2, [r1]
-
- /* ... and write the core clock config register */
- ldr r2, =CFG_CCCR
- ldr r1, =CCCR
- str r2, [r1]
-
- /* Turn on turbo mode */
- mrc p14, 0, r2, c6, c0, 0
- orr r2, r2, #0xB /* Turbo, Fast-Bus, Freq change**/
- mcr p14, 0, r2, c6, c0, 0
-
- /* Re-write MDREFR */
- ldr r1, =MEMC_BASE
- ldr r2, [r1, #MDREFR_OFFSET]
- str r2, [r1, #MDREFR_OFFSET]
-#ifdef RTC
- /* enable the 32Khz oscillator for RTC and PowerManager */
- ldr r1, =OSCC
- mov r2, #OSCC_OON
- str r2, [r1]
-
- /* NOTE: spin here until OSCC.OOK get set, meaning the PLL */
- /* has settled. */
-60:
- ldr r2, [r1]
- ands r2, r2, #1
- beq 60b
-#else
-#error "RTC not defined"
-#endif
-
- /* Interrupt init: Mask all interrupts */
- ldr r0, =ICMR /* enable no sources */
- mov r1, #0
- str r1, [r0]
- /* FIXME */
-
-#ifdef NODEBUG
- /*Disable software and data breakpoints */
- mov r0,#0
- mcr p15,0,r0,c14,c8,0 /* ibcr0 */
- mcr p15,0,r0,c14,c9,0 /* ibcr1 */
- mcr p15,0,r0,c14,c4,0 /* dbcon */
-
- /*Enable all debug functionality */
- mov r0,#0x80000000
- mcr p14,0,r0,c10,c0,0 /* dcsr */
-#endif
-
- /* ---------------------------------------------------------------- */
- /* End lowlevel_init */
- /* ---------------------------------------------------------------- */
-
-endlowlevel_init:
-
- mov pc, lr
+++ /dev/null
-/*
- * (C) Copyright 2004
- * Robert Whaley, Applied Data Systems, Inc. rwhaley@applieddata.net
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <asm/arch/pxa-regs.h>
-
-void pcmcia_power_on(void)
-{
-#if 0
- if (!(GPLR(20) & GPIO_bit(20))) { /* 3.3V */
- GPCR(81) = GPIO_bit(81);
- GPSR(82) = GPIO_bit(82);
- }
- else if (!(GPLR(21) & GPIO_bit(21))) { /* 5.0V */
- GPCR(81) = GPIO_bit(81);
- GPCR(82) = GPIO_bit(82);
- }
-#else
-#warning "Board will only supply 5V, wait for next HW spin for selectable power"
- /* 5.0V */
- GPCR(81) = GPIO_bit(81);
- GPCR(82) = GPIO_bit(82);
-#endif
-
- udelay(300000);
-
- /* reset the card */
- GPSR(52) = GPIO_bit(52);
-
- /* enable PCMCIA */
- GPCR(83) = GPIO_bit(83);
-
- /* clear reset */
- udelay(10);
- GPCR(52) = GPIO_bit(52);
-
- udelay(20000);
-}
-
-void pcmcia_power_off(void)
-{
- /* 0V */
- GPSR(81) = GPIO_bit(81);
- GPSR(82) = GPIO_bit(82);
- /* disable PCMCIA */
- GPSR(83) = GPIO_bit(83);
-}
+++ /dev/null
-/*
- * (C) Copyright 2004
- * Robert Whaley, Applied Data Systems, Inc. rwhaley@applieddata.net
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <asm/arch/pxa-regs.h>
-
-#define LTC1663_ADDR 0x20
-
-#define LTC1663_SY 0x01 /* Sync ACK */
-#define LTC1663_SD 0x04 /* shutdown */
-#define LTC1663_BG 0x04 /* Internal Voltage Ref */
-
-#define VOLT_1_55 18 /* DAC value for 1.55V */
-
- .global initPXAvoltage
-
-@ Set the voltage to 1.55V early in the boot process so we can run
-@ at a high clock speed and boot quickly. Note that this is necessary
-@ because the reset button does not reset the CPU voltage, so if the
-@ voltage was low (say 0.85V) then the CPU would crash without this
-@ routine
-
-@ This routine clobbers r0-r4
-
-initializei2c:
-
- ldr r2, =CKEN
- ldr r3, [r2]
- orr r3, r3, #CKEN15_PWRI2C
- str r3, [r2]
-
- ldr r2, =PCFR
- ldr r3, [r2]
- orr r3, r3, #PCFR_PI2C_EN
- str r3, [r2]
-
- /* delay for about 250msec
- */
- ldr r3, =OSCR
- mov r2, #0
- str r2, [r3]
- ldr r1, =0xC0000
-
-1:
- ldr r2, [r3]
- cmp r1, r2
- bgt 1b
- ldr r0, =PWRICR
- ldr r1, [r0]
- bic r1, r1, #(ICR_MA | ICR_START | ICR_STOP)
- str r1, [r0]
-
- orr r1, r1, #ICR_UR
- str r1, [r0]
-
- ldr r2, =PWRISR
- ldr r3, =0x7ff
- str r3, [r2]
-
- bic r1, r1, #ICR_UR
- str r1, [r0]
-
- mov r1, #(ICR_GCD | ICR_SCLE)
- str r1, [r0]
-
- orr r1, r1, #ICR_IUE
- str r1, [r0]
-
- orr r1, r1, #ICR_FM
- str r1, [r0]
-
- /* delay for about 1msec
- */
- ldr r3, =OSCR
- mov r2, #0
- str r2, [r3]
- ldr r1, =0xC00
-
-1:
- ldr r2, [r3]
- cmp r1, r2
- bgt 1b
- mov pc, lr
-
-sendbytei2c:
- ldr r3, =PWRIDBR
- str r0, [r3]
- ldr r3, =PWRICR
- ldr r0, [r3]
- orr r0, r0, r1
- bic r0, r0, r2
- str r0, [r3]
- orr r0, r0, #ICR_TB
- str r0, [r3]
-
- mov r2, #0x100000
-
-waitfortxemptyi2c:
-
- ldr r0, =PWRISR
- ldr r1, [r0]
-
- /* take it from the top if we don't get empty after a while */
- subs r2, r2, #1
- moveq lr, r4
- beq initPXAvoltage
-
- tst r1, #ISR_ITE
-
- beq waitfortxemptyi2c
-
- orr r1, r1, #ISR_ITE
- str r1, [r0]
-
- mov pc, lr
-
-initPXAvoltage:
-
- mov r4, lr
-
- bl setleds
-
- bl initializei2c
-
- bl setleds
-
- /* now send the real message to set the correct voltage */
- ldr r0, =LTC1663_ADDR
- mov r0, r0, LSL #1
- mov r1, #ICR_START
- ldr r2, =(ICR_STOP | ICR_ALDIE | ICR_ACKNAK)
- bl sendbytei2c
-
- bl setleds
-
- mov r0, #LTC1663_BG
- mov r1, #0
- mov r2, #(ICR_STOP | ICR_START)
- bl sendbytei2c
-
- bl setleds
-
- ldr r0, =VOLT_1_55
- and r0, r0, #0xff
- mov r1, #0
- mov r2, #(ICR_STOP | ICR_START)
- bl sendbytei2c
-
- bl setleds
-
- ldr r0, =VOLT_1_55
- mov r0, r0, ASR #8
- and r0, r0, #0xff
- mov r1, #ICR_STOP
- mov r2, #ICR_START
- bl sendbytei2c
-
- bl setleds
-
- @ delay a little for the volatage to stablize
- ldr r3, =OSCR
- mov r2, #0
- str r2, [r3]
- ldr r1, =0xC0
-
-1:
- ldr r2, [r3]
- cmp r1, r2
- bgt 1b
- mov pc, r4
-
-setleds:
- mov pc, lr
-
- ldr r5, =0x40e00058
- ldr r3, [r5]
- bic r3, r3, #0x3
- str r3, [r5]
- ldr r5, =0x40e0000c
- ldr r3, [r5]
- orr r3, r3, #0x00010000
- str r3, [r5]
-
- @ inner loop
- mov r0, #0x2
-1:
-
- ldr r5, =0x40e00018
- mov r3, #0x00010000
- str r3, [r5]
-
- @ outer loop
- mov r3, #0x00F00000
-2:
- subs r3, r3, #1
- bne 2b
-
- ldr r5, =0x40e00024
- mov r3, #0x00010000
- str r3, [r5]
-
- @ outer loop
- mov r3, #0x00F00000
-3:
- subs r3, r3, #1
- bne 3b
-
- subs r0, r0, #1
- bne 1b
-
- mov pc, lr
+++ /dev/null
-/*
- * (C) Copyright 2000
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm")
-OUTPUT_ARCH(arm)
-ENTRY(_start)
-SECTIONS
-{
- . = 0x00000000;
-
- . = ALIGN(4);
- .text :
- {
- cpu/pxa/start.o (.text)
- *(.text)
- }
-
- . = ALIGN(4);
- .rodata : { *(.rodata) }
-
- . = ALIGN(4);
- .data : { *(.data) }
-
- . = ALIGN(4);
- .got : { *(.got) }
-
- . = .;
- __u_boot_cmd_start = .;
- .u_boot_cmd : { *(.u_boot_cmd) }
- __u_boot_cmd_end = .;
-
- . = ALIGN(4);
- __bss_start = .;
- .bss (NOLOAD) : { *(.bss) }
- _end = .;
-}
set_GPIO_mode(GPIO8_MMCCS0_MD);
#endif
CKEN |= CKEN12_MMC; /* enable MMC unit clock */
-#if defined(CONFIG_ADSVIX)
- /* turn on the power */
- GPCR(114) = GPIO_bit(114);
- udelay(1000);
-#endif
MMC_CLKRT = MMC_CLKRT_0_3125MHZ;
MMC_RESTO = MMC_RES_TO_MAX;
+++ /dev/null
-/*
- * (C) Copyright 2004
- * Robert Whaley, Applied Data Systems, Inc. rwhaley@applieddata.net
- *
- * (C) Copyright 2002
- * Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net
- *
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Marius Groeger <mgroeger@sysgo.de>
- *
- * Configuation settings for the LUBBOCK board.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/*
- * High Level Configuration Options
- * (easy to change)
- */
-#define CONFIG_PXA27X 1 /* This is an PXA27x CPU */
-#define CONFIG_ADSVIX 1 /* on a Adsvix Board */
-#define CONFIG_MMC 1
-#define BOARD_LATE_INIT 1
-
-#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */
-
-#define RTC
-
-/*
- * Size of malloc() pool
- */
-#define CFG_MALLOC_LEN (CFG_ENV_SIZE + 128*1024)
-#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */
-
-/*
- * Hardware drivers
- */
-
-/*
- * select serial console configuration
- */
-#define CONFIG_FFUART 1 /* we use FFUART on ADSVIX */
-
-/* allow to overwrite serial and ethaddr */
-#define CONFIG_ENV_OVERWRITE
-
-#define CONFIG_BAUDRATE 38400
-
-#define CONFIG_DOS_PARTITION 1
-
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_FAT
-#define CONFIG_CMD_IDE
-#define CONFIG_CMD_MMC
-#define CONFIG_CMD_PCMCIA
-
-#undef CONFIG_CMD_NET
-
-
-#undef CONFIG_SHOW_BOOT_PROGRESS
-
-#define CONFIG_BOOTDELAY 3
-#define CONFIG_SERVERIP 192.168.1.99
-#define CONFIG_BOOTCOMMAND "run boot_flash"
-#define CONFIG_BOOTARGS "console=ttyS0,38400 ramdisk_size=12288"\
- " rw root=/dev/ram initrd=0xa0800000,5m"
-
-#define CONFIG_EXTRA_ENV_SETTINGS \
- "program_boot_cf=" \
- "mw.b 0xa0010000 0xff 0x20000; " \
- "if pinit on && " \
- "ide reset && " \
- "fatload ide 0 0xa0010000 u-boot.bin; " \
- "then " \
- "protect off 0x0 0x1ffff; " \
- "erase 0x0 0x1ffff; " \
- "cp.b 0xa0010000 0x0 0x20000; " \
- "fi\0" \
- "program_uzImage_cf=" \
- "mw.b 0xa0010000 0xff 0x180000; " \
- "if pinit on && " \
- "ide reset && " \
- "fatload ide 0 0xa0010000 uzImage; " \
- "then " \
- "protect off 0x40000 0x1bffff; " \
- "erase 0x40000 0x1bffff; " \
- "cp.b 0xa0010000 0x40000 0x180000; " \
- "fi\0" \
- "program_ramdisk_cf=" \
- "mw.b 0xa0010000 0xff 0x500000; " \
- "if pinit on && " \
- "ide reset && " \
- "fatload ide 0 0xa0010000 ramdisk.gz; " \
- "then " \
- "protect off 0x1c0000 0x6bffff; " \
- "erase 0x1c0000 0x6bffff; " \
- "cp.b 0xa0010000 0x1c0000 0x500000; " \
- "fi\0" \
- "boot_cf=" \
- "if pinit on && " \
- "ide reset && " \
- "fatload ide 0 0xa0030000 uzImage && " \
- "fatload ide 0 0xa0800000 ramdisk.gz; " \
- "then " \
- "bootm 0xa0030000; " \
- "fi\0" \
- "program_boot_mmc=" \
- "mw.b 0xa0010000 0xff 0x20000; " \
- "if mmcinit && " \
- "fatload mmc 0 0xa0010000 u-boot.bin; " \
- "then " \
- "protect off 0x0 0x1ffff; " \
- "erase 0x0 0x1ffff; " \
- "cp.b 0xa0010000 0x0 0x20000; " \
- "fi\0" \
- "program_uzImage_mmc=" \
- "mw.b 0xa0010000 0xff 0x180000; " \
- "if mmcinit && " \
- "fatload mmc 0 0xa0010000 uzImage; " \
- "then " \
- "protect off 0x40000 0x1bffff; " \
- "erase 0x40000 0x1bffff; " \
- "cp.b 0xa0010000 0x40000 0x180000; " \
- "fi\0" \
- "program_ramdisk_mmc=" \
- "mw.b 0xa0010000 0xff 0x500000; " \
- "if mmcinit && " \
- "fatload mmc 0 0xa0010000 ramdisk.gz; " \
- "then " \
- "protect off 0x1c0000 0x6bffff; " \
- "erase 0x1c0000 0x6bffff; " \
- "cp.b 0xa0010000 0x1c0000 0x500000; " \
- "fi\0" \
- "boot_mmc=" \
- "if mmcinit && " \
- "fatload mmc 0 0xa0030000 uzImage && " \
- "fatload mmc 0 0xa0800000 ramdisk.gz; " \
- "then " \
- "bootm 0xa0030000; " \
- "fi\0" \
- "boot_flash=" \
- "cp.b 0x1c0000 0xa0800000 0x500000; " \
- "bootm 0x40000\0" \
-
-#define CONFIG_SETUP_MEMORY_TAGS 1
-#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */
-/* #define CONFIG_INITRD_TAG 1 */
-
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
-#endif
-
-/*
- * Miscellaneous configurable options
- */
-#define CFG_HUSH_PARSER 1
-#define CFG_PROMPT_HUSH_PS2 "> "
-
-#define CFG_LONGHELP /* undef to save memory */
-#ifdef CFG_HUSH_PARSER
-#define CFG_PROMPT "$ " /* Monitor Command Prompt */
-#else
-#define CFG_PROMPT "=> " /* Monitor Command Prompt */
-#endif
-#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
-#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#define CFG_MAXARGS 16 /* max number of command args */
-#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
-#define CFG_DEVICE_NULLDEV 1
-
-#define CFG_MEMTEST_START 0xa0400000 /* memtest works on */
-#define CFG_MEMTEST_END 0xa0800000 /* 4 ... 8 MB in DRAM */
-
-#undef CFG_CLKS_IN_HZ /* everything, incl board info, in Hz */
-
-#define CFG_LOAD_ADDR 0xa1000000 /* default load address */
-
-#define CFG_HZ 3686400 /* incrementer freq: 3.6864 MHz */
-#define CFG_CPUSPEED 0x207 /* need to look more closely, I think this is Turbo = 2x, L=91Mhz */
-
- /* valid baudrates */
-#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
-
-#define CFG_MMC_BASE 0xF0000000
-
-/*
- * Stack sizes
- *
- * The stack sizes are set up in start.S using the settings below
- */
-#define CONFIG_STACKSIZE (128*1024) /* regular stack */
-#ifdef CONFIG_USE_IRQ
-#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */
-#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */
-#endif
-
-/*
- * Physical Memory Map
- */
-#define CONFIG_NR_DRAM_BANKS 4 /* we have 2 banks of DRAM */
-#define PHYS_SDRAM_1 0xa0000000 /* SDRAM Bank #1 */
-#define PHYS_SDRAM_1_SIZE 0x04000000 /* 64 MB */
-#define PHYS_SDRAM_2 0xa4000000 /* SDRAM Bank #2 */
-#define PHYS_SDRAM_2_SIZE 0x00000000 /* 0 MB */
-#define PHYS_SDRAM_3 0xa8000000 /* SDRAM Bank #3 */
-#define PHYS_SDRAM_3_SIZE 0x00000000 /* 0 MB */
-#define PHYS_SDRAM_4 0xac000000 /* SDRAM Bank #4 */
-#define PHYS_SDRAM_4_SIZE 0x00000000 /* 0 MB */
-
-#define PHYS_FLASH_1 0x00000000 /* Flash Bank #1 */
-
-#define CFG_DRAM_BASE 0xa0000000
-#define CFG_DRAM_SIZE 0x04000000
-
-#define CFG_FLASH_BASE PHYS_FLASH_1
-
-/*
- * GPIO settings
- */
-
-#define CFG_GPSR0_VAL 0x00018004
-#define CFG_GPSR1_VAL 0x004F0080
-#define CFG_GPSR2_VAL 0x13EFC000
-#define CFG_GPSR3_VAL 0x0006E032
-#define CFG_GPCR0_VAL 0x084AFE1A
-#define CFG_GPCR1_VAL 0x003003F2
-#define CFG_GPCR2_VAL 0x0C014000
-#define CFG_GPCR3_VAL 0x00000C00
-#define CFG_GPDR0_VAL 0xCBC3BFFC
-#define CFG_GPDR1_VAL 0x00FFABF3
-#define CFG_GPDR2_VAL 0x1EEFFC00
-#define CFG_GPDR3_VAL 0x0187EC32
-#define CFG_GAFR0_L_VAL 0x84400000
-#define CFG_GAFR0_U_VAL 0xA51A8010
-#define CFG_GAFR1_L_VAL 0x699A955A
-#define CFG_GAFR1_U_VAL 0x0005A0AA
-#define CFG_GAFR2_L_VAL 0x40000000
-#define CFG_GAFR2_U_VAL 0x0109A400
-#define CFG_GAFR3_L_VAL 0x54000000
-#define CFG_GAFR3_U_VAL 0x00001409
-
-#define CFG_PSSR_VAL 0x20
-
-/*
- * Clock settings
- */
-#define CFG_CKEN 0x00400200
-#define CFG_CCCR 0x02000290 /* 520Mhz */
-/* #define CFG_CCCR 0x02000210 416 Mhz */
-
-/*
- * Memory settings
- */
-
-#define CFG_MSC0_VAL 0x23F2B3DB
-#define CFG_MSC1_VAL 0x0000CCD1
-#define CFG_MSC2_VAL 0x0000B884
-#define CFG_MDCNFG_VAL 0x08000AC8
-#define CFG_MDREFR_VAL 0x0000001E
-#define CFG_MDMRS_VAL 0x00000000
-
-#define CFG_FLYCNFG_VAL 0x00010001
-#define CFG_SXCNFG_VAL 0x40044004
-
-/*
- * PCMCIA and CF Interfaces
- */
-#define CFG_MECR_VAL 0x00000002
-#define CFG_MCMEM0_VAL 0x00004204
-#define CFG_MCMEM1_VAL 0x00000000
-#define CFG_MCATT0_VAL 0x00010504
-#define CFG_MCATT1_VAL 0x00000000
-#define CFG_MCIO0_VAL 0x00008407
-#define CFG_MCIO1_VAL 0x00000000
-
-#define CONFIG_PXA_PCMCIA 1
-#define CONFIG_PXA_IDE 1
-
-#define CONFIG_PCMCIA_SLOT_A 1
-/* just to keep build system happy */
-
-#define CFG_PCMCIA_MEM_ADDR 0x28000000
-#define CFG_PCMCIA_MEM_SIZE 0x04000000
-
-
-#define CFG_IDE_MAXBUS 1
-/* max. 1 IDE bus */
-#define CFG_IDE_MAXDEVICE 1
-/* max. 1 drive per IDE bus */
-
-#define CFG_ATA_IDE0_OFFSET 0x0000
-
-#define CFG_ATA_BASE_ADDR 0x20000000
-
-/* Offset for data I/O */
-#define CFG_ATA_DATA_OFFSET 0x1f0
-
-/* Offset for normal register accesses */
-#define CFG_ATA_REG_OFFSET 0x1f0
-
-/* Offset for alternate registers */
-#define CFG_ATA_ALT_OFFSET 0x3f0
-
-/*
- * FLASH and environment organization
- */
-
-#define CFG_FLASH_CFI
-#define CFG_FLASH_CFI_DRIVER 1
-
-#define CFG_MONITOR_BASE 0
-#define CFG_MONITOR_LEN 0x20000
-
-#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */
-#define CFG_MAX_FLASH_SECT 4 + 255 /* max number of sectors on one chip */
-
-/* timeout values are in ticks */
-#define CFG_FLASH_ERASE_TOUT (25*CFG_HZ) /* Timeout for Flash Erase */
-#define CFG_FLASH_WRITE_TOUT (25*CFG_HZ) /* Timeout for Flash Write */
-
-/* write flash less slowly */
-#define CFG_FLASH_USE_BUFFER_WRITE 1
-
-/* Flash environment locations */
-#define CFG_ENV_IS_IN_FLASH 1
-#define CFG_ENV_ADDR (PHYS_FLASH_1 + CFG_MONITOR_LEN) /* Addr of Environment Sector */
-#define CFG_ENV_SIZE 0x20000 /* Total Size of Environment */
-#define CFG_ENV_SECT_SIZE 0x20000 /* Total Size of Environment Sector */
-
-#endif /* __CONFIG_H */
projects / oweals / u-boot.git / commitdiff