ARM: socfpga: Convert to DM serial
authorMarek Vasut <marex@denx.de>
Fri, 11 May 2018 20:26:35 +0000 (22:26 +0200)
committerMarek Vasut <marex@denx.de>
Fri, 18 May 2018 08:30:46 +0000 (10:30 +0200)
Pull the serial port configuration from DT and use DM serial instead
of having the serial configuration in two places, DT and board config.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Chin Liang See <chin.liang.see@intel.com>
Cc: Dinh Nguyen <dinguyen@kernel.org>
arch/arm/Kconfig
arch/arm/dts/socfpga.dtsi
arch/arm/dts/socfpga_arria10_socdk_sdmmc.dts
include/configs/socfpga_common.h

index 532aa41a87ebb8faab668e692bf45153716f11c3..2012ac64105e1ad523034ce3b46bb71f43398d1d 100644 (file)
@@ -737,6 +737,7 @@ config ARCH_SOCFPGA
        select ARCH_MISC_INIT
        select CPU_V7A
        select DM
+       select DM_SERIAL
        select ENABLE_ARM_SOC_BOOT0_HOOK
        select OF_CONTROL
        select SPL_LIBCOMMON_SUPPORT
@@ -746,11 +747,13 @@ config ARCH_SOCFPGA
        select SPL_NAND_SUPPORT if SPL_NAND_DENALI
        select SPL_OF_CONTROL
        select SPL_SERIAL_SUPPORT
+       select SPL_DM_SERIAL
        select SPL_SPI_FLASH_SUPPORT if SPL_SPI_SUPPORT
        select SPL_SPI_SUPPORT if DM_SPI
        select SPL_WATCHDOG_SUPPORT
        select SUPPORT_SPL
        select SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION_TYPE
+       select SYS_NS16550
        select SYS_THUMB_BUILD
        imply CMD_MTDPARTS
        imply CRC32_VERIFY
index e64127fcb289620d4bd95f79ade8244191c5a76e..314449478d0ba5c48762b26f571c9b9d1e7dd861 100644 (file)
                        reg-shift = <2>;
                        reg-io-width = <4>;
                        clocks = <&l4_sp_clk>;
+                       clock-frequency = <100000000>;
                };
 
                uart1: serial1@ffc03000 {
                        reg-shift = <2>;
                        reg-io-width = <4>;
                        clocks = <&l4_sp_clk>;
+                       clock-frequency = <100000000>;
                };
 
                rst: rstmgr@ffd05000 {
index b573d0e658224c9791d6f6095dcc72626dd3c3b7..06b61cb0af27d93a039416f1f1ffa85d53deaffe 100644 (file)
@@ -24,6 +24,7 @@
 };
 
 &uart1 {
+       clock-frequency = <50000000>;
        u-boot,dm-pre-reloc;
        status = "okay";
 };
index 54b9edc97cd05b89aa566c3dcd70b5b2da63201c..a60da85499b1e5ac17b538e0e37c6261ee297032 100644 (file)
@@ -173,14 +173,6 @@ unsigned int cm_get_qspi_controller_clk_hz(void);
  * Serial Driver
  */
 #define CONFIG_SYS_NS16550_SERIAL
-#define CONFIG_SYS_NS16550_REG_SIZE    -4
-#if defined(CONFIG_TARGET_SOCFPGA_GEN5)
-#define CONFIG_SYS_NS16550_COM1                SOCFPGA_UART0_ADDRESS
-#define CONFIG_SYS_NS16550_CLK         100000000
-#elif defined(CONFIG_TARGET_SOCFPGA_ARRIA10)
-#define CONFIG_SYS_NS16550_COM1        SOCFPGA_UART1_ADDRESS
-#define CONFIG_SYS_NS16550_CLK         50000000
-#endif
 
 /*
  * USB