+commit c440bfe6d6d92d66478a7e84402b31f48413617b
+Author: Stefan Roese <sr@denx.de>
+Date: Wed Jun 6 11:42:13 2007 +0200
+
+ ppc4xx: Add NAND booting support for AMCC Acadia (405EZ) eval board
+
+ This patch adds NAND booting support for the AMCC Acadia eval board.
+
+ Please make sure to configure jumper J7 to position 2-3 when booting
+ from NOR, and to position 1-2 when booting for NAND.
+
+ I also added a board command to configure the I2C bootstrap EEPROM
+ values. Right now only 267MHz is support for booting either via NOR
+ or NAND FLASH. Here the usage:
+
+ => bootstrap 267 nor ;to configure the board for 267MHz NOR booting
+ => bootstrap 267 nand ;to configure the board for 267MHz NNAND booting
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 32922cdc470fdfd39bea0c1c4f582d3fb340421e
+Author: Ed Swarthout <Ed.Swarthout@freescale.com>
+Date: Tue Jun 5 12:30:52 2007 -0500
+
+ mpc8641 image size cleanup
+
+ e600 does not have a bootpg restriction.
+ Move the version string to beginning of image at fff00000.
+ Resetvec.S is not needed.
+ Update flash copy instructions.
+ Add tftpflash env variable
+
+ Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit e3cbe1f93c5722f8ebbad468e30c069a2b511097
+Author: Benoît Monin <bmonin@adeneo.eu>
+Date: Mon Jun 4 08:36:05 2007 +0200
+
+ [PATCH] Fix ppc4xx bootstrap letter displayed on startup
+
+ The attached patch is mainly cosmetic, allowing u-boot to
+ display the correct bootstrap option letter according to the
+ datasheets.
+
+ The original patch was extended with 405EZ support by Stefan
+ Roese.
+
+ Signed-off-by: Benoit Monin <bmonin@adeneo.eu>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 18d156eb37c90fadc8ec7a81a3b89176161f85b7
+Author: Stefan Roese <sr@denx.de>
+Date: Fri Jun 1 16:18:17 2007 +0200
+
+ ppc4xx: Add missing file for Bamboo NAND booting support
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 155a96478a0881e6da96cbbbcf34952d6a3b1b4b
+Author: Stefan Roese <sr@denx.de>
+Date: Fri Jun 1 15:58:19 2007 +0200
+
+ ppc4xx: Undo Sequoia patch for dynamic EBC speed support of 83MHz
+
+ This patch undoes the patch by Jeff Mann with commit-id ada4697d. As
+ suggested by AMCC it is not recommended to dynamically change the EBC
+ speed after bootup. So we undo this change to be on the safe side.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 9d9096043e8f713d4bf1743d32e1459e6a11644b
+Author: Stefan Roese <sr@denx.de>
+Date: Fri Jun 1 15:29:04 2007 +0200
+
+ ppc4xx: Update Sequoia NAND booting support with ECC
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit cf959c7d6687567c308e366e9581e1a5aff5cc5b
+Author: Stefan Roese <sr@denx.de>
+Date: Fri Jun 1 15:27:11 2007 +0200
+
+ ppc4xx: Add NAND booting support for AMCC Bamboo (440EP) eval board
+
+ This patch adds NAND booting support for the AMCC Bamboo eval board.
+ Since the NAND-SPL boot image is limited to 4kbytes, this version
+ only supports the onboard 64MBytes of DDR. The DIMM modules can't be
+ supported, since the setup code for I2C DIMM autodetection and
+ configuration is too big for this NAND bootloader.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 42be56f53c8b107868e6125c8524ae84293e95a7
+Author: Stefan Roese <sr@denx.de>
+Date: Fri Jun 1 15:23:04 2007 +0200
+
+ NAND: Add ECC support to NAND booting support in nand_spl/nand_boot.c
+
+ The U-Boot NAND booting support is now extended to support ECC
+ upon loading of the NAND U-Boot image.
+
+ Tested on AMCC Sequoia (440EPx) and Bamboo (440EP).
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit a471db07fbb65a841ffc9f4f112562b945230f98
+Author: Stefan Roese <sr@denx.de>
+Date: Fri Jun 1 15:19:29 2007 +0200
+
+ ppc4xx: Prepare Bamboo port for NAND booting support
+
+ This patch updates the "normal" Bamboo NOR booting port, so
+ that it is compatible with the coming soon NAND booting
+ Bamboo port.
+
+ It also enables the 2nd NAND flash on the Bamboo.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 53ad02103fb8be4138a9937a8ab91fcdff7b4987
+Author: Stefan Roese <sr@denx.de>
+Date: Fri Jun 1 15:16:58 2007 +0200
+
+ ppc4xx: Update in_be32() functions and friends to latest Linux version
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 91da09cfbce0c1de05d6d84aa8363d666fa7ea3c
+Author: Stefan Roese <sr@denx.de>
+Date: Fri Jun 1 15:15:12 2007 +0200
+
+ NAND: Add hardware ECC support to the PPC4xx NAND driver ndfc.c
+
+ This patch adds hardware ECC support to the NDFC driver. It also
+ changes the register access from using the "simple" in32/out32
+ functions to the in_be32/out_be32 functions, which make sure
+ that the access is correctly synced. This is the only recommended
+ access to SoC registers in the current Linux kernel.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 17b5e862287cca76f19dcf8b741e61a7d06617f2
+Author: Stefan Roese <sr@denx.de>
+Date: Fri Jun 1 15:12:15 2007 +0200
+
+ NAND: Update nand_ecc.c to latest Linux version
+
+ This patch updates the nand_ecc code to the latest Linux version.
+ The main reason for this is the more compact code. This makes
+ it possible to include the ECC code into the NAND bootloader
+ image (NAND_SPL) for PPC4xx.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit d2d432760d2199d0e8558fdd9d1789b8131abcf7
+Author: Stefan Roese <sr@denx.de>
+Date: Fri Jun 1 15:09:50 2007 +0200
+
+ ppc4xx: 44x DDR driver code cleanup and small fix for Bamboo
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit e4bbed2803a2ad0521c7362f5d3e065f99abaedc
+Author: Stefan Roese <sr@denx.de>
+Date: Fri Jun 1 13:45:24 2007 +0200
+
+ ppc4xx: Change Luan config file to support ECC
+
+ With the updated 44x DDR2 driver the Luan board now supports
+ ECC generation and checking.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 7187db73491c8de0fb56efb5e5134ba5ec443089
+Author: Stefan Roese <sr@denx.de>
+Date: Fri Jun 1 13:45:00 2007 +0200
+
+ ppc4xx: Update 44x_spd_ddr2 code (440SP/440SPe)
+
+ Add config option for 180 degree advance clock control as needed
+ for the AMCC Luan eval board.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit ee1529838abbfaa35f14e3ffbeaaba693159475f
+Author: Wolfgang Denk <wd@denx.de>
+Date: Thu May 31 17:20:09 2007 +0200
+
+ Add support for STX GP3SSA (stxssa) Board with 4 MiB flash.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 7049288fb1f16f1b317140226cdebd07bd416395
+Author: Bartlomiej Sieka <tur@semihalf.com>
+Date: Sun May 27 17:26:46 2007 +0200
+
+ Motion-PRO: Code cleanup, fix of a typo in OF_STDOUT_PATH.
+
+ Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
+
+commit 4520fd4d2c450da49637216aa0e53739b61c60ac
+Author: Bartlomiej Sieka <tur@semihalf.com>
+Date: Sun May 27 17:06:36 2007 +0200
+
+ Motion-PRO: Add support for redundant environment.
+
+ Enable redundant environment, add a MTD partition for it; also add env.
+ variable command for passing MTD partitions to the kernel command line.
+
+ Signed-off-by: Piotr Kruszynski <ppk@semihalf.com>
+ Acked-by: Bartlomiej Sieka <tur@semihalf.com>
+
+commit a26eabeec31746f06d309103690892805696e344
+Author: Bartlomiej Sieka <tur@semihalf.com>
+Date: Sun May 27 17:05:11 2007 +0200
+
+ Motion-PRO: Change maximum console buffer size from 256 to 1024 bytes.
+
+ Allow passing longer command line to the kernel - useful especially
+ for passing MTD partition layout.
+
+ Signed-off-by: Piotr Kruszynski <ppk@semihalf.com>
+ Acked-by: Bartlomiej Sieka <tur@semihalf.com>
+
+commit 9160b96f71483a116de81c68985e8ee306d36764
+Author: Bartlomiej Sieka <tur@semihalf.com>
+Date: Sun May 27 17:04:18 2007 +0200
+
+ Fix: Add missing NULL termination in strings expanded by macros parser.
+
+ Signed-off-by: Piotr Kruszynski <ppk@semihalf.com>
+ Acked-by: Bartlomiej Sieka <tur@semihalf.com>
+
+commit 630ec84aef7228fc1dbfb38dec78541403a786cd
+Author: Bartlomiej Sieka <tur@semihalf.com>
+Date: Sun May 27 17:03:37 2007 +0200
+
+ Motion-PRO: Update EEPROM's page write bits and write delay.
+
+ Change EEPROM configuration according to the datasheet: "The 24C01A and 24C02A
+ have a page write capability of two bytes", and "This device offers fast (1ms)
+ byte write". Add 3ms of extra delay.
+
+ Signed-off-by: Piotr Kruszynski <ppk@semihalf.com>
+ Acked-by: Bartlomiej Sieka <tur@semihalf.com>
+
+commit c00125e07c1ebc125bab40e1e18bceed8be0c162
+Author: Bartlomiej Sieka <tur@semihalf.com>
+Date: Sun May 27 16:58:45 2007 +0200
+
+ MPC5XXX, Motion-PRO: Fix PHY initialization problem.
+
+ After being reset in mpc5xxx_fec_init_phy(), PHY goes into FX mode, in which
+ networking does not function. This commit switches PHY to TX mode by clearing
+ the FX_SEL bit of Mode Control Register. It also reverses commit
+ 008861a2f3ef2c062744d733787c7e530a1b8761, i.e., a temporary workaround.
+
+ Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
+ Acked-by: Bartlomiej Sieka <tur@semihalf.com>
+
+commit 93b78f534a6e708b4cf1a4ffb4d8438c67a007db
+Author: Bartlomiej Sieka <tur@semihalf.com>
+Date: Sun May 27 16:57:15 2007 +0200
+
+ Motion-PRO: Add support for the temperature sensor.
+
+ Signed-off-by: Piotr Kruszynski <ppk@semihalf.com>
+ Acked-by: Bartlomiej Sieka <tur@semihalf.com>
+
+commit c75e639630cc132dc19cd1ecda5922c0db0bfbba
+Author: Bartlomiej Sieka <tur@semihalf.com>
+Date: Sun May 27 16:55:23 2007 +0200
+
+ Motion-PRO: Add displaying of CPLD revision information during boot.
+
+ Signed-off-by: Jan Wrobel <wrr@semihalf.com>
+ Acked-by: Bartlomiej Sieka <tur@semihalf.com>
+
+commit c99512d6bd3973f01ca2fc4896d829b46e68f150
+Author: Bartlomiej Sieka <tur@semihalf.com>
+Date: Sun May 27 16:53:43 2007 +0200
+
+ MPC5xxx: Change names of defines related to IPB and PCI clocks.
+
+ Both CFG_PCISPEED_66 and CFG_IPBSPEED_133 are misnamed, as defining
+ them does not cause PCI or IPB clocks to run at the specified speed.
+ Instead, they configure divisors used to calculate said clocks. This
+ patch renames the defines according to their real function.
+
+ Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
+ Acked-by: Bartlomiej Sieka <tur@semihalf.com>
+
+commit a11c0b85dc3664bb3c1e781137118730c8f619ab
+Author: Bartlomiej Sieka <tur@semihalf.com>
+Date: Sun May 27 16:51:48 2007 +0200
+
+ Motion-PRO: Add LED support.
+
+ Signed-off-by: Jan Wrobel <wrr@semihalf.com>
+ Signed-off-by: Marian Balakowicz <m8@semihalf.com>
+ Acked-by: Bartlomiej Sieka <tur@semihalf.com>
+
+commit d756894722c888d09a9fa1df8323753772d3dcce
+Author: Stefan Roese <sr@denx.de>
+Date: Thu May 24 09:49:00 2007 +0200
+
+ ppc4xx: Fix small 405EZ OCM initilization bug in start.S
+
+ As pointed out by Bruce Adler <bruce.adler@acm.org> this patch
+ fixes a small bug in the 405EZ OCM initialization. Thanks for
+ spotting.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 5d4a179013d59a76446462e1eb0a969fba63eb81
+Author: Stefan Roese <sr@denx.de>
+Date: Thu May 24 08:22:09 2007 +0200
+
+ ppc4xx: Update AMCC Acadia support for board revision 1.1
+
+ This patch updates the Acadia (405EZ) support for the new 1.1 board
+ revision. It also adds support for NAND FLASH via the 4xx NDFC.
+
+ Please note that the jumper J7 must be in position 2-3 for this
+ NAND support. Position 1-2 is for NAND booting only. NAND booting
+ support will follow later.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 9f0077abd69f7a7c756a915b961037302be3e6f2
+Author: Stefan Roese <sr@denx.de>
+Date: Tue May 22 12:48:09 2007 +0200
+
+ ppc4xx: Use do { ... } while (0) for CPR & SDR access macros
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 6f3dfc139a838b0841c151efe00ad47db2366e79
+Author: Stefan Roese <sr@denx.de>
+Date: Tue May 22 12:46:10 2007 +0200
+
+ ppc4xx: Add 405 support to 4xx NAND driver ndfc.c
+
+ This patch adds support for 405 PPC's to the 4xx NAND driver
+ ndfc.c. This is in preparation for the new AMCC 405EZ.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 10603d76767426be803dadd4fb688b97eb69481c
+Author: Stefan Roese <sr@denx.de>
+Date: Mon May 21 07:41:22 2007 +0200
+
+ ppc4xx: Fix problem in 405EZ OCM initialization
+
+ As spotted by Bruce Adler this patch fixes an initialization problem
+ for the 405EZ OCM.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 3e3b956906eba9e4ad7931581ecedaad10eccce8
+Author: Peter Pearse <peter.pearse@arm.com>
+Date: Fri May 18 16:47:03 2007 +0100
+
+ Reduce line lengths to 80 characters max.
+
+commit 93ef45c9ddfdd9fc17c4e74bd8e2f2456580eb72
+Author: Peter Pearse <peter.pearse@arm.com>
+Date: Fri May 18 14:34:07 2007 +0100
+
+ Makefile permissions
+
+commit 1443a31457d68f7e8f0b9403e9832ec1e79dc59d
+Author: Peter Pearse <peter.pearse@arm.com>
+Date: Fri May 18 14:33:11 2007 +0100
+
+ Makefile permissions
+
+commit 70124c2602ae2d4c5d3dba05b482d91548242de8
+Author: Stefano Babic <sbabic@denx.de>
+Date: Wed May 16 14:49:12 2007 +0200
+
+ Fix compile problem cause my Microblaze merge
+
+ Signed-off-by: Stefano Babic <sbabic@denx.de>
+
+commit ada4697d0230d6da552867777f98a67ec3ba2579
+Author: Jeffrey Mann <mannj@embeddedplanet.com>
+Date: Wed May 16 13:23:10 2007 +0200
+
+ [PATCH] Run new sequoia boards with an EBC speed of 83MHz
+
+ Because the Sequoia board does not boot with an EBC faster than 66MHz,
+ the clock divider are changed after the initial boot process.
+
+ This allows for maximum clocking speeds to be achieved on newer boards.
+ Sequoia boards with 666.66 MHz processors require that the EBC divider
+ be set to 3 in order to start the initial boot process at a slower EBC
+ speed. After the initial boot process, the divider can be set back to 2,
+ which will cause the boards to run at 83.333MHz. This is backward
+ compatible with boards with 533.33 MHz processors, as these boards will
+ already be set with an EBC divider of 2.
+
+ Signed-off-by: Jeffrey Mann <mannj@embeddedplanet.com>
+
+commit a7676ea7732f3c596805079fed7e5c9fac652cfc
+Author: Wolfgang Denk <wd@denx.de>
+Date: Wed May 16 01:16:53 2007 +0200
+
+ Minor Coding Style cleanup, update CHANGELOG.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
commit d62f64cc23a940eafe712c776b3249e4160753d1
Author: Wolfgang Denk <wd@denx.de>
Date: Wed May 16 00:13:33 2007 +0200
Coding Style Cleanup, new CHANGELOG
+commit 61936667e86a250ae12fd2dc189d3588f0a59e0b
+Author: Stefan Roese <sr@denx.de>
+Date: Fri May 11 12:01:49 2007 +0200
+
+ ppc4xx: Add mtcpr/mfcpr access macros
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 343c48bd84606c4025c8a7c7263fda465d6e284c
+Author: Stefan Roese <sr@denx.de>
+Date: Fri May 11 12:01:06 2007 +0200
+
+ ppc4xx: Set bd->bi_pci_busfreq on 440EPx/GRx too
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
commit 7d98ba770a7eaefa29ce927f31a0956df85bf650
Author: Piotr Kruszynski <ppk@semihalf.com>
Date: Thu May 10 16:55:52 2007 +0200
[Motion-PRO] Add MTD and JFFS2 support, also add default partition
definition.
+commit 65fb6a676e821f9570a2a376dc204bf611ce5f81
+Author: Peter Pearse <peter.pearse@arm.com>
+Date: Wed May 9 11:42:44 2007 +0100
+
+ Add the board directory for SMN42
+
+commit 160131bf965785419626df6c388729fe0b597992
+Author: Peter Pearse <peter.pearse@arm.com>
+Date: Wed May 9 11:41:58 2007 +0100
+
+ Add the files for the SMN42 board
+
+commit 5c6d2b5a500f8c49670de8910150b78a41f781fc
+Author: Peter Pearse <peter.pearse@arm.com>
+Date: Wed May 9 11:40:34 2007 +0100
+
+ Remove the deleted files for the SMN42 patch
+
+commit b0d8f5bf0d215adc9424cb228b2484dbf07f7761
+Author: Peter Pearse <peter.pearse@arm.com>
+Date: Wed May 9 11:37:56 2007 +0100
+
+ New board SMN42 branch
+
+commit 29f3be0caf0799ca6b89dfd9824c15619a50000f
+Author: Peter Pearse <peter.pearse@arm.com>
+Date: Wed May 9 10:24:38 2007 +0100
+
+ Makefile permissions
+
+commit b84289b595731e8851df46e893845cc1322c9b9b
+Author: Ed Swarthout <Ed.Swarthout@freescale.com>
+Date: Tue May 8 14:17:07 2007 -0500
+
+ 8641hpcn: Fix Makefile after moving pixis to board/freescale.
+
+ The OBJTREE != SRCTREE build scenario was broken.
+ This fixes it.
+
+ Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
commit e69f66c6ebe82bbbd1da766bc4eda40ec7ee5af1
Author: Michal Simek <monstr@monstr.eu>
Date: Tue May 8 15:57:43 2007 +0200
fix: read and write MSR - repair number of parameters
+commit 193b4a3bb3acaddf798da8de0da05d94ba8774ee
+Author: Jeffrey Mann <mannj@embeddedplanet.com>
+Date: Mon May 7 19:42:49 2007 +0200
+
+ [PATCH] ppc4xx: Fix CONFIG_SYS_CLK_FREQ definition in Sequoia config file
+
+ A '3' got cut off in the formatting of the last patch to automatically
+ change the clock speed of the system clock on sequoia board.
+
+ Signed-off-by: Jeffrey Mann <mannj@embeddedplanet.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
commit 19bf1fbad7f19d5a120be9b1daf136e052fcab39
Author: Michal Simek <monstr@monstr.eu>
Date: Mon May 7 19:33:51 2007 +0200
projects / oweals / u-boot.git / commitdiff