Motion-PRO: Code cleanup, fix of a typo in OF_STDOUT_PATH.
authorBartlomiej Sieka <tur@semihalf.com>
Sun, 27 May 2007 15:26:46 +0000 (17:26 +0200)
committerBartlomiej Sieka <tur@semihalf.com>
Sun, 27 May 2007 15:26:46 +0000 (17:26 +0200)
Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
board/motionpro/motionpro.c
include/configs/motionpro.h

index b05e2ab1cdb851d75a20396d50feb8824f7fa148..40d304b7cc2087af0a216badb088a9f3b670a7b8 100644 (file)
@@ -102,7 +102,7 @@ void reset_phy(void)
 /*
  * Helper function to initialize SDRAM controller.
  */
-static void sdram_start (int hi_addr)
+static void sdram_start(int hi_addr)
 {
        long hi_addr_bit = hi_addr ? 0x01000000 : 0;
 
@@ -134,7 +134,7 @@ static void sdram_start (int hi_addr)
 /*
  * Initalize SDRAM - configure SDRAM controller, detect memory size.
  */
-long int initdram (int board_type)
+long int initdram(int board_type)
 {
        ulong dramsize = 0;
 #ifndef CFG_RAMBOOT
@@ -187,7 +187,7 @@ long int initdram (int board_type)
 }
 
 
-int checkboard (void)
+int checkboard(void)
 {
        uchar rev = *(vu_char *)CPLD_REV_REGISTER;
        printf("Board: Promess Motion-PRO board (CPLD rev. 0x%02x)\n", rev);
@@ -204,7 +204,7 @@ void ft_board_setup(void *blob, bd_t *bd)
 
 
 #if defined(CONFIG_STATUS_LED)
-void __led_init (led_id_t regaddr, int state)
+void __led_init(led_id_t regaddr, int state)
 {
        *((vu_long *) regaddr) |= ENABLE_GPIO_OUT;
 
@@ -214,7 +214,7 @@ void __led_init (led_id_t regaddr, int state)
                *((vu_long *) regaddr) &= ~LED_ON;
 }
 
-void __led_set (led_id_t regaddr, int state)
+void __led_set(led_id_t regaddr, int state)
 {
        if (state == STATUS_LED_ON)
                *((vu_long *) regaddr) |= LED_ON;
@@ -222,7 +222,7 @@ void __led_set (led_id_t regaddr, int state)
                *((vu_long *) regaddr) &= ~LED_ON;
 }
 
-void __led_toggle (led_id_t regaddr)
+void __led_toggle(led_id_t regaddr)
 {
        *((vu_long *) regaddr) ^= LED_ON;
 }
index 8170ccbbc7668d8da714b7afac9f7cca1606ac5b..e3899a5ab4066da21b7d8b21f12687c83f923697 100644 (file)
        "fdt_file=/tftpboot/motionpro/motionpro.dtb\0"                  \
        "ramdisk_file=/tftpboot/motionpro/uRamdisk\0"                   \
        "multi_image_file=kernel+initrd+dtb.img\0"                      \
-       "load=tftp $(u-boot_addr) $(u-boot)\0"                          \
+       "load=tftp ${u-boot_addr} ${u-boot}\0"                          \
        "update=prot off fff00000 fff3ffff; era fff00000 fff3ffff; "    \
-               "cp.b $(u-boot_addr) fff00000 $(filesize);"             \
+               "cp.b ${u-boot_addr} fff00000 ${filesize};"             \
                "prot on fff00000 fff3ffff\0"                           \
        "ramargs=setenv bootargs root=/dev/ram rw\0"                    \
        "nfsargs=setenv bootargs root=/dev/nfs rw "                     \
-               "nfsroot=$(serverip):$(rootpath)\0"                     \
+               "nfsroot=${serverip}:${rootpath}\0"                     \
        "fat_args=setenv bootargs rw\0"                                 \
-       "addmtd=setenv bootargs $(bootargs) $(mtdparts)\0"              \
-       "addip=setenv bootargs $(bootargs) "                            \
-               "ip=$(ipaddr):$(serverip):$(gatewayip):"                \
-               "$(netmask):$(hostname):$(netdev):off panic=1 "         \
-               "console=$(console)\0"                                  \
-       "net_nfs=tftp $(kernel_addr) $(bootfile); "                     \
-               "tftp $(fdt_addr) $(fdt_file); run nfsargs addip; "     \
-               "bootm $(kernel_addr) - $(fdt_addr)\0"                  \
-       "net_self=tftp $(kernel_addr) $(bootfile); "                    \
-               "tftp $(fdt_addr) $(fdt_file); "                        \
-               "tftp $(ramdisk_addr) $(ramdisk_file); "                \
+       "addmtd=setenv bootargs ${bootargs} ${mtdparts}\0"              \
+       "addip=setenv bootargs ${bootargs} "                            \
+               "ip=${ipaddr}:${serverip}:${gatewayip}:"                \
+               "${netmask}:${hostname}:${netdev}:off panic=1 "         \
+               "console=${console}\0"                                  \
+       "net_nfs=tftp ${kernel_addr} ${bootfile}; "                     \
+               "tftp ${fdt_addr} ${fdt_file}; run nfsargs addip; "     \
+               "bootm ${kernel_addr} - ${fdt_addr}\0"                  \
+       "net_self=tftp ${kernel_addr} ${bootfile}; "                    \
+               "tftp ${fdt_addr} ${fdt_file}; "                        \
+               "tftp ${ramdisk_addr} ${ramdisk_file}; "                \
                "run ramargs addip; "                                   \
-               "bootm $(kernel_addr) $(ramdisk_addr) $(fdt_addr)\0"    \
+               "bootm ${kernel_addr} ${ramdisk_addr} ${fdt_addr}\0"    \
        "fat_multi=run fat_args addip; fatload ide 0:1 "                \
                "${multi_image_addr} ${multi_image_file}; "             \
                "bootm ${multi_image_addr}\0"                           \
@@ -418,6 +418,6 @@ extern void __led_set(led_id_t id, int state);
 #define OF_CPU                 "PowerPC,5200@0"
 #define OF_SOC                 "soc5200@f0000000"
 #define OF_TBCLK               (bd->bi_busfreq / 4)
-#define OF_STDOUT_PAT          "/soc5200@f0000000/serial@2000"
+#define OF_STDOUT_PATH         "/soc5200@f0000000/serial@2000"
 
 #endif /* __CONFIG_H */