--- /dev/null
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * K3: System Firmware Loader
+ *
+ * Copyright (C) 2019 Texas Instruments Incorporated - http://www.ti.com/
+ * Andreas Dannenberg <dannenberg@ti.com>
+ */
+
+#include <common.h>
+#include <spl.h>
+#include <malloc.h>
+#include <remoteproc.h>
+#include <linux/soc/ti/ti_sci_protocol.h>
+#include <asm/arch/sys_proto.h>
+
+/* Name of the FIT image nodes for SYSFW and its config data */
+#define SYSFW_FIRMWARE "sysfw.bin"
+#define SYSFW_CFG_BOARD "board-cfg.bin"
+#define SYSFW_CFG_PM "pm-cfg.bin"
+#define SYSFW_CFG_RM "rm-cfg.bin"
+#define SYSFW_CFG_SEC "sec-cfg.bin"
+
+static bool sysfw_loaded;
+static void *sysfw_load_address;
+
+/*
+ * Populate SPL hook to override the default load address used by the SPL
+ * loader function with a custom address for SYSFW loading.
+ */
+struct image_header *spl_get_load_buffer(ssize_t offset, size_t size)
+{
+ if (sysfw_loaded)
+ return (struct image_header *)(CONFIG_SYS_TEXT_BASE + offset);
+ else if (sysfw_load_address)
+ return sysfw_load_address;
+ else
+ panic("SYSFW load address not defined!");
+}
+
+/*
+ * Populate SPL hook to skip the default SPL loader FIT post-processing steps
+ * during SYSFW loading and return to the calling function so we can perform
+ * our own custom processing.
+ */
+bool spl_load_simple_fit_skip_processing(void)
+{
+ return !sysfw_loaded;
+}
+
+static int fit_get_data_by_name(const void *fit, int images, const char *name,
+ const void **addr, size_t *size)
+{
+ int node_offset;
+
+ node_offset = fdt_subnode_offset(fit, images, name);
+ if (node_offset < 0)
+ return -ENOENT;
+
+ return fit_image_get_data(fit, node_offset, addr, size);
+}
+
+static void k3_sysfw_load_using_fit(void *fit)
+{
+ int images;
+ const void *sysfw_addr;
+ size_t sysfw_size;
+ int ret;
+
+ /* Find the node holding the images information */
+ images = fdt_path_offset(fit, FIT_IMAGES_PATH);
+ if (images < 0)
+ panic("Cannot find /images node (%d)\n", images);
+
+ /* Extract System Firmware (SYSFW) image from FIT */
+ ret = fit_get_data_by_name(fit, images, SYSFW_FIRMWARE,
+ &sysfw_addr, &sysfw_size);
+ if (ret < 0)
+ panic("Error accessing %s node in FIT (%d)\n", SYSFW_FIRMWARE,
+ ret);
+
+ /*
+ * Start up system controller firmware
+ *
+ * It is assumed that remoteproc device 0 is the corresponding
+ * system-controller that runs SYSFW. Make sure DT reflects the same.
+ */
+ ret = rproc_dev_init(0);
+ if (ret)
+ panic("rproc failed to be initialized (%d)\n", ret);
+
+ ret = rproc_load(0, (ulong)sysfw_addr, (ulong)sysfw_size);
+ if (ret)
+ panic("Firmware failed to start on rproc (%d)\n", ret);
+
+ ret = rproc_start(0);
+ if (ret)
+ panic("Firmware init failed on rproc (%d)\n", ret);
+}
+
+static void k3_sysfw_configure_using_fit(void *fit,
+ struct ti_sci_handle *ti_sci)
+{
+ struct ti_sci_board_ops *board_ops = &ti_sci->ops.board_ops;
+ int images;
+ const void *cfg_fragment_addr;
+ size_t cfg_fragment_size;
+ int ret;
+
+ /* Find the node holding the images information */
+ images = fdt_path_offset(fit, FIT_IMAGES_PATH);
+ if (images < 0)
+ panic("Cannot find /images node (%d)\n", images);
+
+ /* Extract board configuration from FIT */
+ ret = fit_get_data_by_name(fit, images, SYSFW_CFG_BOARD,
+ &cfg_fragment_addr, &cfg_fragment_size);
+ if (ret < 0)
+ panic("Error accessing %s node in FIT (%d)\n", SYSFW_CFG_BOARD,
+ ret);
+
+ /* Apply board configuration to SYSFW */
+ ret = board_ops->board_config(ti_sci,
+ (u64)(u32)cfg_fragment_addr,
+ (u32)cfg_fragment_size);
+ if (ret)
+ panic("Failed to set board configuration (%d)\n", ret);
+
+ /* Extract power/clock (PM) specific configuration from FIT */
+ ret = fit_get_data_by_name(fit, images, SYSFW_CFG_PM,
+ &cfg_fragment_addr, &cfg_fragment_size);
+ if (ret < 0)
+ panic("Error accessing %s node in FIT (%d)\n", SYSFW_CFG_PM,
+ ret);
+
+ /* Apply power/clock (PM) specific configuration to SYSFW */
+ ret = board_ops->board_config_pm(ti_sci,
+ (u64)(u32)cfg_fragment_addr,
+ (u32)cfg_fragment_size);
+ if (ret)
+ panic("Failed to set board PM configuration (%d)\n", ret);
+
+ /* Extract resource management (RM) specific configuration from FIT */
+ ret = fit_get_data_by_name(fit, images, SYSFW_CFG_RM,
+ &cfg_fragment_addr, &cfg_fragment_size);
+ if (ret < 0)
+ panic("Error accessing %s node in FIT (%d)\n", SYSFW_CFG_RM,
+ ret);
+
+ /* Apply resource management (RM) configuration to SYSFW */
+ ret = board_ops->board_config_rm(ti_sci,
+ (u64)(u32)cfg_fragment_addr,
+ (u32)cfg_fragment_size);
+ if (ret)
+ panic("Failed to set board RM configuration (%d)\n", ret);
+
+ /* Extract security specific configuration from FIT */
+ ret = fit_get_data_by_name(fit, images, SYSFW_CFG_SEC,
+ &cfg_fragment_addr, &cfg_fragment_size);
+ if (ret < 0)
+ panic("Error accessing %s node in FIT (%d)\n", SYSFW_CFG_SEC,
+ ret);
+
+ /* Apply security configuration to SYSFW */
+ ret = board_ops->board_config_security(ti_sci,
+ (u64)(u32)cfg_fragment_addr,
+ (u32)cfg_fragment_size);
+ if (ret)
+ panic("Failed to set board security configuration (%d)\n",
+ ret);
+}
+
+void k3_sysfw_loader(void (*config_pm_done_callback)(void))
+{
+ struct spl_image_info spl_image = { 0 };
+ struct spl_boot_device bootdev = { 0 };
+ struct ti_sci_handle *ti_sci;
+ int ret;
+
+ /* Reserve a block of aligned memory for loading the SYSFW image */
+ sysfw_load_address = memalign(ARCH_DMA_MINALIGN,
+ CONFIG_K3_SYSFW_IMAGE_SIZE_MAX);
+ if (!sysfw_load_address)
+ panic("Error allocating %u bytes of memory for SYSFW image\n",
+ CONFIG_K3_SYSFW_IMAGE_SIZE_MAX);
+
+ debug("%s: allocated %u bytes at 0x%p\n", __func__,
+ CONFIG_K3_SYSFW_IMAGE_SIZE_MAX, sysfw_load_address);
+
+ /* Set load address for legacy modes that bypass spl_get_load_buffer */
+ spl_image.load_addr = (uintptr_t)sysfw_load_address;
+
+ bootdev.boot_device = spl_boot_device();
+
+ /* Load combined System Controller firmware and config data image */
+ switch (bootdev.boot_device) {
+#if CONFIG_IS_ENABLED(MMC_SUPPORT)
+ case BOOT_DEVICE_MMC1:
+ case BOOT_DEVICE_MMC2:
+ case BOOT_DEVICE_MMC2_2:
+ ret = spl_mmc_load(&spl_image, &bootdev,
+#ifdef CONFIG_K3_SYSFW_IMAGE_NAME
+ CONFIG_K3_SYSFW_IMAGE_NAME,
+#else
+ NULL,
+#endif
+#ifdef CONFIG_K3_SYSFW_IMAGE_MMCSD_RAW_MODE_PART
+ CONFIG_K3_SYSFW_IMAGE_MMCSD_RAW_MODE_PART,
+#else
+ 0,
+#endif
+#ifdef CONFIG_K3_SYSFW_IMAGE_MMCSD_RAW_MODE_SECT
+ CONFIG_K3_SYSFW_IMAGE_MMCSD_RAW_MODE_SECT);
+#else
+ 0);
+#endif
+ break;
+#endif
+ default:
+ panic("Loading SYSFW image from device %u not supported!\n",
+ bootdev.boot_device);
+ }
+
+ if (ret)
+ panic("Error %d occurred during loading SYSFW image!\n", ret);
+
+ /*
+ * Now that SYSFW got loaded set helper flag to restore regular SPL
+ * loader behavior so we can later boot into the next stage as expected.
+ */
+ sysfw_loaded = true;
+
+ /* Ensure the SYSFW image is in FIT format */
+ if (image_get_magic((const image_header_t *)sysfw_load_address) !=
+ FDT_MAGIC)
+ panic("SYSFW image not in FIT format!\n");
+
+ /* Extract and start SYSFW */
+ k3_sysfw_load_using_fit(sysfw_load_address);
+
+ /* Get handle for accessing SYSFW services */
+ ti_sci = get_ti_sci_handle();
+
+ /* Parse and apply the different SYSFW configuration fragments */
+ k3_sysfw_configure_using_fit(sysfw_load_address, ti_sci);
+
+ /*
+ * Now that all clocks and PM aspects are setup, invoke a user-
+ * provided callback function. Usually this callback would be used
+ * to setup or re-configure the U-Boot console UART.
+ */
+ if (config_pm_done_callback)
+ config_pm_done_callback();
+
+ /* Output System Firmware version info */
+ printf("SYSFW ABI: %d.%d (firmware rev 0x%04x '%.*s')\n",
+ ti_sci->version.abi_major, ti_sci->version.abi_minor,
+ ti_sci->version.firmware_revision,
+ sizeof(ti_sci->version.firmware_description),
+ ti_sci->version.firmware_description);
+}
projects / oweals / u-boot.git / commitdiff