mtd: nand: zynq: Add support for the NAND lock/unlock operation
authorJoe Hershberger <joe.hershberger@ni.com>
Tue, 7 Nov 2017 02:16:10 +0000 (18:16 -0800)
committerMichal Simek <michal.simek@xilinx.com>
Wed, 29 Nov 2017 07:02:40 +0000 (08:02 +0100)
Zynq NAND driver is not support for NAND lock or unlock operation.
Hence, accidentally write into the critical NAND region might cause
data corruption to occur.

This commit is to add NAND lock/unlock command into NAND SMC register
set for NAND lock/unlock operaion.

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
Signed-off-by: Keng Soon Cheah <keng.soon.cheah@ni.com>
Cc: Chen Yee Chew <chen.yee.chew@ni.com>
Cc: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com>
Cc: Michal Simek <michal.simek@xilinx.com>
Cc: Scott Wood <oss@buserror.net>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
drivers/mtd/nand/zynq_nand.c

index e6c80b5b5c1b6e01ee8c2236c42cb7468850a816..076b878244364dbee57212356bad8e1453427548 100644 (file)
 #define ZYNQ_NAND_ECC_BUSY     (1 << 6)        /* ECC block is busy */
 #define ZYNQ_NAND_ECC_MASK     0x00FFFFFF      /* ECC value mask */
 
+#ifndef NAND_CMD_LOCK_TIGHT
+#define NAND_CMD_LOCK_TIGHT 0x2c
+#endif
+
+#ifndef NAND_CMD_LOCK_STATUS
+#define NAND_CMD_LOCK_STATUS 0x7a
+#endif
 
 /* SMC register set */
 struct zynq_nand_smc_regs {
@@ -144,6 +151,11 @@ static const struct zynq_nand_command_format zynq_nand_commands[] = {
        {NAND_CMD_PARAM, NAND_CMD_NONE, 1, 0},
        {NAND_CMD_GET_FEATURES, NAND_CMD_NONE, 1, 0},
        {NAND_CMD_SET_FEATURES, NAND_CMD_NONE, 1, 0},
+       {NAND_CMD_LOCK, NAND_CMD_NONE, 0, 0},
+       {NAND_CMD_LOCK_TIGHT, NAND_CMD_NONE, 0, 0},
+       {NAND_CMD_UNLOCK1, NAND_CMD_NONE, 3, 0},
+       {NAND_CMD_UNLOCK2, NAND_CMD_NONE, 3, 0},
+       {NAND_CMD_LOCK_STATUS, NAND_CMD_NONE, 3, 0},
        {NAND_CMD_NONE, NAND_CMD_NONE, 0, 0},
        /* Add all the flash commands supported by the flash device */
 };