--- /dev/null
+/*
+ * include/asm-arm/arch-at91/at91_pio.h
+ *
+ * Copyright (C) 2005 Ivan Kokshaysky
+ * Copyright (C) SAN People
+ *
+ * Parallel I/O Controller (PIO) - System peripherals registers.
+ * Based on AT91RM9200 datasheet revision E.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91_PIO_H
+#define AT91_PIO_H
+
+#define PIO_PER 0x00 /* Enable Register */
+#define PIO_PDR 0x04 /* Disable Register */
+#define PIO_PSR 0x08 /* Status Register */
+#define PIO_OER 0x10 /* Output Enable Register */
+#define PIO_ODR 0x14 /* Output Disable Register */
+#define PIO_OSR 0x18 /* Output Status Register */
+#define PIO_IFER 0x20 /* Glitch Input Filter Enable */
+#define PIO_IFDR 0x24 /* Glitch Input Filter Disable */
+#define PIO_IFSR 0x28 /* Glitch Input Filter Status */
+#define PIO_SODR 0x30 /* Set Output Data Register */
+#define PIO_CODR 0x34 /* Clear Output Data Register */
+#define PIO_ODSR 0x38 /* Output Data Status Register */
+#define PIO_PDSR 0x3c /* Pin Data Status Register */
+#define PIO_IER 0x40 /* Interrupt Enable Register */
+#define PIO_IDR 0x44 /* Interrupt Disable Register */
+#define PIO_IMR 0x48 /* Interrupt Mask Register */
+#define PIO_ISR 0x4c /* Interrupt Status Register */
+#define PIO_MDER 0x50 /* Multi-driver Enable Register */
+#define PIO_MDDR 0x54 /* Multi-driver Disable Register */
+#define PIO_MDSR 0x58 /* Multi-driver Status Register */
+#define PIO_PUDR 0x60 /* Pull-up Disable Register */
+#define PIO_PUER 0x64 /* Pull-up Enable Register */
+#define PIO_PUSR 0x68 /* Pull-up Status Register */
+#define PIO_ASR 0x70 /* Peripheral A Select Register */
+#define PIO_BSR 0x74 /* Peripheral B Select Register */
+#define PIO_ABSR 0x78 /* AB Status Register */
+#define PIO_OWER 0xa0 /* Output Write Enable Register */
+#define PIO_OWDR 0xa4 /* Output Write Disable Register */
+#define PIO_OWSR 0xa8 /* Output Write Status Register */
+
+#endif
--- /dev/null
+/*
+ * include/asm-arm/arch-at91/at91_pit.h
+ *
+ * Periodic Interval Timer (PIT) - System peripherals regsters.
+ * Based on AT91SAM9261 datasheet revision D.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91_PIT_H
+#define AT91_PIT_H
+
+#define AT91_PIT_MR (AT91_PIT + 0x00) /* Mode Register */
+#define AT91_PIT_PITIEN (1 << 25) /* Timer Interrupt Enable */
+#define AT91_PIT_PITEN (1 << 24) /* Timer Enabled */
+#define AT91_PIT_PIV (0xfffff) /* Periodic Interval Value */
+
+#define AT91_PIT_SR (AT91_PIT + 0x04) /* Status Register */
+#define AT91_PIT_PITS (1 << 0) /* Timer Status */
+
+#define AT91_PIT_PIVR (AT91_PIT + 0x08) /* Periodic Interval Value Register */
+#define AT91_PIT_PIIR (AT91_PIT + 0x0c) /* Periodic Interval Image Register */
+#define AT91_PIT_PICNT (0xfff << 20) /* Interval Counter */
+#define AT91_PIT_CPIV (0xfffff) /* Inverval Value */
+
+#endif
--- /dev/null
+/*
+ * include/asm-arm/arch-at91/at91_pmc.h
+ *
+ * Copyright (C) 2005 Ivan Kokshaysky
+ * Copyright (C) SAN People
+ *
+ * Power Management Controller (PMC) - System peripherals registers.
+ * Based on AT91RM9200 datasheet revision E.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91_PMC_H
+#define AT91_PMC_H
+
+#define AT91_PMC_SCER (AT91_PMC + 0x00) /* System Clock Enable Register */
+#define AT91_PMC_SCDR (AT91_PMC + 0x04) /* System Clock Disable Register */
+
+#define AT91_PMC_SCSR (AT91_PMC + 0x08) /* System Clock Status Register */
+#define AT91_PMC_PCK (1 << 0) /* Processor Clock */
+#define AT91RM9200_PMC_UDP (1 << 1) /* USB Devcice Port Clock [AT91RM9200 only] */
+#define AT91RM9200_PMC_MCKUDP (1 << 2) /* USB Device Port Master Clock Automatic Disable on Suspend [AT91RM9200 only] */
+#define AT91RM9200_PMC_UHP (1 << 4) /* USB Host Port Clock [AT91RM9200 only] */
+#define AT91SAM926x_PMC_UHP (1 << 6) /* USB Host Port Clock [AT91SAM926x only] */
+#define AT91CAP9_PMC_UHP (1 << 6) /* USB Host Port Clock [AT91CAP9 only] */
+#define AT91SAM926x_PMC_UDP (1 << 7) /* USB Devcice Port Clock [AT91SAM926x only] */
+#define AT91_PMC_PCK0 (1 << 8) /* Programmable Clock 0 */
+#define AT91_PMC_PCK1 (1 << 9) /* Programmable Clock 1 */
+#define AT91_PMC_PCK2 (1 << 10) /* Programmable Clock 2 */
+#define AT91_PMC_PCK3 (1 << 11) /* Programmable Clock 3 */
+#define AT91_PMC_HCK0 (1 << 16) /* AHB Clock (USB host) [AT91SAM9261 only] */
+#define AT91_PMC_HCK1 (1 << 17) /* AHB Clock (LCD) [AT91SAM9261 only] */
+
+#define AT91_PMC_PCER (AT91_PMC + 0x10) /* Peripheral Clock Enable Register */
+#define AT91_PMC_PCDR (AT91_PMC + 0x14) /* Peripheral Clock Disable Register */
+#define AT91_PMC_PCSR (AT91_PMC + 0x18) /* Peripheral Clock Status Register */
+
+#define AT91_CKGR_UCKR (AT91_PMC + 0x1C) /* UTMI Clock Register [SAM9RL, CAP9] */
+
+#define AT91_CKGR_MOR (AT91_PMC + 0x20) /* Main Oscillator Register [not on SAM9RL] */
+#define AT91_PMC_MOSCEN (1 << 0) /* Main Oscillator Enable */
+#define AT91_PMC_OSCBYPASS (1 << 1) /* Oscillator Bypass [AT91SAM926x only] */
+#define AT91_PMC_OSCOUNT (0xff << 8) /* Main Oscillator Start-up Time */
+
+#define AT91_CKGR_MCFR (AT91_PMC + 0x24) /* Main Clock Frequency Register */
+#define AT91_PMC_MAINF (0xffff << 0) /* Main Clock Frequency */
+#define AT91_PMC_MAINRDY (1 << 16) /* Main Clock Ready */
+
+#define AT91_CKGR_PLLAR (AT91_PMC + 0x28) /* PLL A Register */
+#define AT91_CKGR_PLLBR (AT91_PMC + 0x2c) /* PLL B Register */
+#define AT91_PMC_DIV (0xff << 0) /* Divider */
+#define AT91_PMC_PLLCOUNT (0x3f << 8) /* PLL Counter */
+#define AT91_PMC_OUT (3 << 14) /* PLL Clock Frequency Range */
+#define AT91_PMC_MUL (0x7ff << 16) /* PLL Multiplier */
+#define AT91_PMC_USBDIV (3 << 28) /* USB Divisor (PLLB only) */
+#define AT91_PMC_USBDIV_1 (0 << 28)
+#define AT91_PMC_USBDIV_2 (1 << 28)
+#define AT91_PMC_USBDIV_4 (2 << 28)
+#define AT91_PMC_USB96M (1 << 28) /* Divider by 2 Enable (PLLB only) */
+
+#define AT91_PMC_MCKR (AT91_PMC + 0x30) /* Master Clock Register */
+#define AT91_PMC_CSS (3 << 0) /* Master Clock Selection */
+#define AT91_PMC_CSS_SLOW (0 << 0)
+#define AT91_PMC_CSS_MAIN (1 << 0)
+#define AT91_PMC_CSS_PLLA (2 << 0)
+#define AT91_PMC_CSS_PLLB (3 << 0)
+#define AT91_PMC_PRES (7 << 2) /* Master Clock Prescaler */
+#define AT91_PMC_PRES_1 (0 << 2)
+#define AT91_PMC_PRES_2 (1 << 2)
+#define AT91_PMC_PRES_4 (2 << 2)
+#define AT91_PMC_PRES_8 (3 << 2)
+#define AT91_PMC_PRES_16 (4 << 2)
+#define AT91_PMC_PRES_32 (5 << 2)
+#define AT91_PMC_PRES_64 (6 << 2)
+#define AT91_PMC_MDIV (3 << 8) /* Master Clock Division */
+#define AT91_PMC_MDIV_1 (0 << 8)
+#define AT91_PMC_MDIV_2 (1 << 8)
+#define AT91_PMC_MDIV_3 (2 << 8)
+#define AT91_PMC_MDIV_4 (3 << 8)
+
+#define AT91_PMC_PCKR(n) (AT91_PMC + 0x40 + ((n) * 4)) /* Programmable Clock 0-3 Registers */
+
+#define AT91_PMC_IER (AT91_PMC + 0x60) /* Interrupt Enable Register */
+#define AT91_PMC_IDR (AT91_PMC + 0x64) /* Interrupt Disable Register */
+#define AT91_PMC_SR (AT91_PMC + 0x68) /* Status Register */
+#define AT91_PMC_MOSCS (1 << 0) /* MOSCS Flag */
+#define AT91_PMC_LOCKA (1 << 1) /* PLLA Lock */
+#define AT91_PMC_LOCKB (1 << 2) /* PLLB Lock */
+#define AT91_PMC_MCKRDY (1 << 3) /* Master Clock */
+#define AT91_PMC_PCK0RDY (1 << 8) /* Programmable Clock 0 */
+#define AT91_PMC_PCK1RDY (1 << 9) /* Programmable Clock 1 */
+#define AT91_PMC_PCK2RDY (1 << 10) /* Programmable Clock 2 */
+#define AT91_PMC_PCK3RDY (1 << 11) /* Programmable Clock 3 */
+#define AT91_PMC_IMR (AT91_PMC + 0x6c) /* Interrupt Mask Register */
+
+#endif
--- /dev/null
+/*
+ * include/asm-arm/arch-at91/at91_rstc.h
+ *
+ * Reset Controller (RSTC) - System peripherals regsters.
+ * Based on AT91SAM9261 datasheet revision D.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91_RSTC_H
+#define AT91_RSTC_H
+
+#define AT91_RSTC_CR (AT91_RSTC + 0x00) /* Reset Controller Control Register */
+#define AT91_RSTC_PROCRST (1 << 0) /* Processor Reset */
+#define AT91_RSTC_PERRST (1 << 2) /* Peripheral Reset */
+#define AT91_RSTC_EXTRST (1 << 3) /* External Reset */
+#define AT91_RSTC_KEY (0xa5 << 24) /* KEY Password */
+
+#define AT91_RSTC_SR (AT91_RSTC + 0x04) /* Reset Controller Status Register */
+#define AT91_RSTC_URSTS (1 << 0) /* User Reset Status */
+#define AT91_RSTC_RSTTYP (7 << 8) /* Reset Type */
+#define AT91_RSTC_RSTTYP_GENERAL (0 << 8)
+#define AT91_RSTC_RSTTYP_WAKEUP (1 << 8)
+#define AT91_RSTC_RSTTYP_WATCHDOG (2 << 8)
+#define AT91_RSTC_RSTTYP_SOFTWARE (3 << 8)
+#define AT91_RSTC_RSTTYP_USER (4 << 8)
+#define AT91_RSTC_NRSTL (1 << 16) /* NRST Pin Level */
+#define AT91_RSTC_SRCMP (1 << 17) /* Software Reset Command in Progress */
+
+#define AT91_RSTC_MR (AT91_RSTC + 0x08) /* Reset Controller Mode Register */
+#define AT91_RSTC_URSTEN (1 << 0) /* User Reset Enable */
+#define AT91_RSTC_URSTIEN (1 << 4) /* User Reset Interrupt Enable */
+#define AT91_RSTC_ERSTL (0xf << 8) /* External Reset Length */
+
+#endif
--- /dev/null
+/*
+ * include/asm-arm/arch-at91/at91_spi.h
+ *
+ * Copyright (C) 2005 Ivan Kokshaysky
+ * Copyright (C) SAN People
+ *
+ * Serial Peripheral Interface (SPI) registers.
+ * Based on AT91RM9200 datasheet revision E.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91_SPI_H
+#define AT91_SPI_H
+
+#define AT91_SPI_CR 0x00 /* Control Register */
+#define AT91_SPI_SPIEN (1 << 0) /* SPI Enable */
+#define AT91_SPI_SPIDIS (1 << 1) /* SPI Disable */
+#define AT91_SPI_SWRST (1 << 7) /* SPI Software Reset */
+#define AT91_SPI_LASTXFER (1 << 24) /* Last Transfer [SAM9261 only] */
+
+#define AT91_SPI_MR 0x04 /* Mode Register */
+#define AT91_SPI_MSTR (1 << 0) /* Master/Slave Mode */
+#define AT91_SPI_PS (1 << 1) /* Peripheral Select */
+#define AT91_SPI_PS_FIXED (0 << 1)
+#define AT91_SPI_PS_VARIABLE (1 << 1)
+#define AT91_SPI_PCSDEC (1 << 2) /* Chip Select Decode */
+#define AT91_SPI_DIV32 (1 << 3) /* Clock Selection [AT91RM9200 only] */
+#define AT91_SPI_MODFDIS (1 << 4) /* Mode Fault Detection */
+#define AT91_SPI_LLB (1 << 7) /* Local Loopback Enable */
+#define AT91_SPI_PCS (0xf << 16) /* Peripheral Chip Select */
+#define AT91_SPI_DLYBCS (0xff << 24) /* Delay Between Chip Selects */
+
+#define AT91_SPI_RDR 0x08 /* Receive Data Register */
+#define AT91_SPI_RD (0xffff << 0) /* Receive Data */
+#define AT91_SPI_PCS (0xf << 16) /* Peripheral Chip Select */
+
+#define AT91_SPI_TDR 0x0c /* Transmit Data Register */
+#define AT91_SPI_TD (0xffff << 0) /* Transmit Data */
+#define AT91_SPI_PCS (0xf << 16) /* Peripheral Chip Select */
+#define AT91_SPI_LASTXFER (1 << 24) /* Last Transfer [SAM9261 only] */
+
+#define AT91_SPI_SR 0x10 /* Status Register */
+#define AT91_SPI_RDRF (1 << 0) /* Receive Data Register Full */
+#define AT91_SPI_TDRE (1 << 1) /* Transmit Data Register Full */
+#define AT91_SPI_MODF (1 << 2) /* Mode Fault Error */
+#define AT91_SPI_OVRES (1 << 3) /* Overrun Error Status */
+#define AT91_SPI_ENDRX (1 << 4) /* End of RX buffer */
+#define AT91_SPI_ENDTX (1 << 5) /* End of TX buffer */
+#define AT91_SPI_RXBUFF (1 << 6) /* RX Buffer Full */
+#define AT91_SPI_TXBUFE (1 << 7) /* TX Buffer Empty */
+#define AT91_SPI_NSSR (1 << 8) /* NSS Rising [SAM9261 only] */
+#define AT91_SPI_TXEMPTY (1 << 9) /* Transmission Register Empty [SAM9261 only] */
+#define AT91_SPI_SPIENS (1 << 16) /* SPI Enable Status */
+
+#define AT91_SPI_IER 0x14 /* Interrupt Enable Register */
+#define AT91_SPI_IDR 0x18 /* Interrupt Disable Register */
+#define AT91_SPI_IMR 0x1c /* Interrupt Mask Register */
+
+#define AT91_SPI_CSR(n) (0x30 + ((n) * 4)) /* Chip Select Registers 0-3 */
+#define AT91_SPI_CPOL (1 << 0) /* Clock Polarity */
+#define AT91_SPI_NCPHA (1 << 1) /* Clock Phase */
+#define AT91_SPI_CSAAT (1 << 3) /* Chip Select Active After Transfer [SAM9261 only] */
+#define AT91_SPI_BITS (0xf << 4) /* Bits Per Transfer */
+#define AT91_SPI_BITS_8 (0 << 4)
+#define AT91_SPI_BITS_9 (1 << 4)
+#define AT91_SPI_BITS_10 (2 << 4)
+#define AT91_SPI_BITS_11 (3 << 4)
+#define AT91_SPI_BITS_12 (4 << 4)
+#define AT91_SPI_BITS_13 (5 << 4)
+#define AT91_SPI_BITS_14 (6 << 4)
+#define AT91_SPI_BITS_15 (7 << 4)
+#define AT91_SPI_BITS_16 (8 << 4)
+#define AT91_SPI_SCBR (0xff << 8) /* Serial Clock Baud Rate */
+#define AT91_SPI_DLYBS (0xff << 16) /* Delay before SPCK */
+#define AT91_SPI_DLYBCT (0xff << 24) /* Delay between Consecutive Transfers */
+
+#endif
--- /dev/null
+/*
+ * include/asm-arm/arch-at91/at91cap9.h
+ *
+ * Copyright (C) 2007 Stelian Pop <stelian.pop@leadtechdesign.com>
+ * Copyright (C) 2007 Lead Tech Design <www.leadtechdesign.com>
+ * Copyright (C) 2007 Atmel Corporation.
+ *
+ * Common definitions.
+ * Based on AT91CAP9 datasheet revision B (Preliminary).
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91CAP9_H
+#define AT91CAP9_H
+
+/*
+ * Peripheral identifiers/interrupts.
+ */
+#define AT91_ID_FIQ 0 /* Advanced Interrupt Controller (FIQ) */
+#define AT91_ID_SYS 1 /* System Peripherals */
+#define AT91CAP9_ID_PIOABCD 2 /* Parallel IO Controller A, B, C and D */
+#define AT91CAP9_ID_MPB0 3 /* MP Block Peripheral 0 */
+#define AT91CAP9_ID_MPB1 4 /* MP Block Peripheral 1 */
+#define AT91CAP9_ID_MPB2 5 /* MP Block Peripheral 2 */
+#define AT91CAP9_ID_MPB3 6 /* MP Block Peripheral 3 */
+#define AT91CAP9_ID_MPB4 7 /* MP Block Peripheral 4 */
+#define AT91CAP9_ID_US0 8 /* USART 0 */
+#define AT91CAP9_ID_US1 9 /* USART 1 */
+#define AT91CAP9_ID_US2 10 /* USART 2 */
+#define AT91CAP9_ID_MCI0 11 /* Multimedia Card Interface 0 */
+#define AT91CAP9_ID_MCI1 12 /* Multimedia Card Interface 1 */
+#define AT91CAP9_ID_CAN 13 /* CAN */
+#define AT91CAP9_ID_TWI 14 /* Two-Wire Interface */
+#define AT91CAP9_ID_SPI0 15 /* Serial Peripheral Interface 0 */
+#define AT91CAP9_ID_SPI1 16 /* Serial Peripheral Interface 0 */
+#define AT91CAP9_ID_SSC0 17 /* Serial Synchronous Controller 0 */
+#define AT91CAP9_ID_SSC1 18 /* Serial Synchronous Controller 1 */
+#define AT91CAP9_ID_AC97C 19 /* AC97 Controller */
+#define AT91CAP9_ID_TCB 20 /* Timer Counter 0, 1 and 2 */
+#define AT91CAP9_ID_PWMC 21 /* Pulse Width Modulation Controller */
+#define AT91CAP9_ID_EMAC 22 /* Ethernet */
+#define AT91CAP9_ID_AESTDES 23 /* Advanced Encryption Standard, Triple DES */
+#define AT91CAP9_ID_ADC 24 /* Analog-to-Digital Converter */
+#define AT91CAP9_ID_ISI 25 /* Image Sensor Interface */
+#define AT91CAP9_ID_LCDC 26 /* LCD Controller */
+#define AT91CAP9_ID_DMA 27 /* DMA Controller */
+#define AT91CAP9_ID_UDPHS 28 /* USB High Speed Device Port */
+#define AT91CAP9_ID_UHP 29 /* USB Host Port */
+#define AT91CAP9_ID_IRQ0 30 /* Advanced Interrupt Controller (IRQ0) */
+#define AT91CAP9_ID_IRQ1 31 /* Advanced Interrupt Controller (IRQ1) */
+
+/*
+ * User Peripheral physical base addresses.
+ */
+#define AT91CAP9_BASE_UDPHS 0xfff78000
+#define AT91CAP9_BASE_TCB0 0xfff7c000
+#define AT91CAP9_BASE_TC0 0xfff7c000
+#define AT91CAP9_BASE_TC1 0xfff7c040
+#define AT91CAP9_BASE_TC2 0xfff7c080
+#define AT91CAP9_BASE_MCI0 0xfff80000
+#define AT91CAP9_BASE_MCI1 0xfff84000
+#define AT91CAP9_BASE_TWI 0xfff88000
+#define AT91CAP9_BASE_US0 0xfff8c000
+#define AT91CAP9_BASE_US1 0xfff90000
+#define AT91CAP9_BASE_US2 0xfff94000
+#define AT91CAP9_BASE_SSC0 0xfff98000
+#define AT91CAP9_BASE_SSC1 0xfff9c000
+#define AT91CAP9_BASE_AC97C 0xfffa0000
+#define AT91CAP9_BASE_SPI0 0xfffa4000
+#define AT91CAP9_BASE_SPI1 0xfffa8000
+#define AT91CAP9_BASE_CAN 0xfffac000
+#define AT91CAP9_BASE_PWMC 0xfffb8000
+#define AT91CAP9_BASE_EMAC 0xfffbc000
+#define AT91CAP9_BASE_ADC 0xfffc0000
+#define AT91CAP9_BASE_ISI 0xfffc4000
+#define AT91_BASE_SYS 0xffffe200
+
+/*
+ * System Peripherals (offset from AT91_BASE_SYS)
+ */
+#define AT91_ECC (0xffffe200 - AT91_BASE_SYS)
+#define AT91_BCRAMC (0xffffe400 - AT91_BASE_SYS)
+#define AT91_DDRSDRC (0xffffe600 - AT91_BASE_SYS)
+#define AT91_SMC (0xffffe800 - AT91_BASE_SYS)
+#define AT91_MATRIX (0xffffea00 - AT91_BASE_SYS)
+#define AT91_CCFG (0xffffeb10 - AT91_BASE_SYS)
+#define AT91_DMA (0xffffec00 - AT91_BASE_SYS)
+#define AT91_DBGU (0xffffee00 - AT91_BASE_SYS)
+#define AT91_AIC (0xfffff000 - AT91_BASE_SYS)
+#define AT91_PIOA (0xfffff200 - AT91_BASE_SYS)
+#define AT91_PIOB (0xfffff400 - AT91_BASE_SYS)
+#define AT91_PIOC (0xfffff600 - AT91_BASE_SYS)
+#define AT91_PIOD (0xfffff800 - AT91_BASE_SYS)
+#define AT91_PMC (0xfffffc00 - AT91_BASE_SYS)
+#define AT91_RSTC (0xfffffd00 - AT91_BASE_SYS)
+#define AT91_SHDWC (0xfffffd10 - AT91_BASE_SYS)
+#define AT91_RTT (0xfffffd20 - AT91_BASE_SYS)
+#define AT91_PIT (0xfffffd30 - AT91_BASE_SYS)
+#define AT91_WDT (0xfffffd40 - AT91_BASE_SYS)
+#define AT91_GPBR (0xfffffd50 - AT91_BASE_SYS)
+
+#define AT91_USART0 AT91CAP9_BASE_US0
+#define AT91_USART1 AT91CAP9_BASE_US1
+#define AT91_USART2 AT91CAP9_BASE_US2
+
+
+/*
+ * Internal Memory.
+ */
+#define AT91CAP9_SRAM_BASE 0x00100000 /* Internal SRAM base address */
+#define AT91CAP9_SRAM_SIZE (32 * SZ_1K) /* Internal SRAM size (32Kb) */
+
+#define AT91CAP9_ROM_BASE 0x00400000 /* Internal ROM base address */
+#define AT91CAP9_ROM_SIZE (32 * SZ_1K) /* Internal ROM size (32Kb) */
+
+#define AT91CAP9_LCDC_BASE 0x00500000 /* LCD Controller */
+#define AT91CAP9_UDPHS_BASE 0x00600000 /* USB High Speed Device Port */
+#define AT91CAP9_UHP_BASE 0x00700000 /* USB Host controller */
+
+#define CONFIG_DRAM_BASE AT91_CHIPSELECT_6
+
+#endif
--- /dev/null
+/*
+ * include/asm-arm/arch-at91/at91cap9_matrix.h
+ *
+ * Copyright (C) 2007 Stelian Pop <stelian.pop@leadtechdesign.com>
+ * Copyright (C) 2007 Lead Tech Design <www.leadtechdesign.com>
+ * Copyright (C) 2006 Atmel Corporation.
+ *
+ * Memory Controllers (MATRIX, EBI) - System peripherals registers.
+ * Based on AT91CAP9 datasheet revision B (Preliminary).
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91CAP9_MATRIX_H
+#define AT91CAP9_MATRIX_H
+
+#define AT91_MATRIX_MCFG0 (AT91_MATRIX + 0x00) /* Master Configuration Register 0 */
+#define AT91_MATRIX_MCFG1 (AT91_MATRIX + 0x04) /* Master Configuration Register 1 */
+#define AT91_MATRIX_MCFG2 (AT91_MATRIX + 0x08) /* Master Configuration Register 2 */
+#define AT91_MATRIX_MCFG3 (AT91_MATRIX + 0x0C) /* Master Configuration Register 3 */
+#define AT91_MATRIX_MCFG4 (AT91_MATRIX + 0x10) /* Master Configuration Register 4 */
+#define AT91_MATRIX_MCFG5 (AT91_MATRIX + 0x14) /* Master Configuration Register 5 */
+#define AT91_MATRIX_MCFG6 (AT91_MATRIX + 0x18) /* Master Configuration Register 6 */
+#define AT91_MATRIX_MCFG7 (AT91_MATRIX + 0x1C) /* Master Configuration Register 7 */
+#define AT91_MATRIX_MCFG8 (AT91_MATRIX + 0x20) /* Master Configuration Register 8 */
+#define AT91_MATRIX_MCFG9 (AT91_MATRIX + 0x24) /* Master Configuration Register 9 */
+#define AT91_MATRIX_MCFG10 (AT91_MATRIX + 0x28) /* Master Configuration Register 10 */
+#define AT91_MATRIX_MCFG11 (AT91_MATRIX + 0x2C) /* Master Configuration Register 11 */
+#define AT91_MATRIX_ULBT (7 << 0) /* Undefined Length Burst Type */
+#define AT91_MATRIX_ULBT_INFINITE (0 << 0)
+#define AT91_MATRIX_ULBT_SINGLE (1 << 0)
+#define AT91_MATRIX_ULBT_FOUR (2 << 0)
+#define AT91_MATRIX_ULBT_EIGHT (3 << 0)
+#define AT91_MATRIX_ULBT_SIXTEEN (4 << 0)
+
+#define AT91_MATRIX_SCFG0 (AT91_MATRIX + 0x40) /* Slave Configuration Register 0 */
+#define AT91_MATRIX_SCFG1 (AT91_MATRIX + 0x44) /* Slave Configuration Register 1 */
+#define AT91_MATRIX_SCFG2 (AT91_MATRIX + 0x48) /* Slave Configuration Register 2 */
+#define AT91_MATRIX_SCFG3 (AT91_MATRIX + 0x4C) /* Slave Configuration Register 3 */
+#define AT91_MATRIX_SCFG4 (AT91_MATRIX + 0x50) /* Slave Configuration Register 4 */
+#define AT91_MATRIX_SCFG5 (AT91_MATRIX + 0x54) /* Slave Configuration Register 5 */
+#define AT91_MATRIX_SCFG6 (AT91_MATRIX + 0x58) /* Slave Configuration Register 6 */
+#define AT91_MATRIX_SCFG7 (AT91_MATRIX + 0x5C) /* Slave Configuration Register 7 */
+#define AT91_MATRIX_SCFG8 (AT91_MATRIX + 0x60) /* Slave Configuration Register 8 */
+#define AT91_MATRIX_SCFG9 (AT91_MATRIX + 0x64) /* Slave Configuration Register 9 */
+#define AT91_MATRIX_SLOT_CYCLE (0xff << 0) /* Maximum Number of Allowed Cycles for a Burst */
+#define AT91_MATRIX_DEFMSTR_TYPE (3 << 16) /* Default Master Type */
+#define AT91_MATRIX_DEFMSTR_TYPE_NONE (0 << 16)
+#define AT91_MATRIX_DEFMSTR_TYPE_LAST (1 << 16)
+#define AT91_MATRIX_DEFMSTR_TYPE_FIXED (2 << 16)
+#define AT91_MATRIX_FIXED_DEFMSTR (0xf << 18) /* Fixed Index of Default Master */
+#define AT91_MATRIX_ARBT (3 << 24) /* Arbitration Type */
+#define AT91_MATRIX_ARBT_ROUND_ROBIN (0 << 24)
+#define AT91_MATRIX_ARBT_FIXED_PRIORITY (1 << 24)
+
+#define AT91_MATRIX_PRAS0 (AT91_MATRIX + 0x80) /* Priority Register A for Slave 0 */
+#define AT91_MATRIX_PRBS0 (AT91_MATRIX + 0x84) /* Priority Register B for Slave 0 */
+#define AT91_MATRIX_PRAS1 (AT91_MATRIX + 0x88) /* Priority Register A for Slave 1 */
+#define AT91_MATRIX_PRBS1 (AT91_MATRIX + 0x8C) /* Priority Register B for Slave 1 */
+#define AT91_MATRIX_PRAS2 (AT91_MATRIX + 0x90) /* Priority Register A for Slave 2 */
+#define AT91_MATRIX_PRBS2 (AT91_MATRIX + 0x94) /* Priority Register B for Slave 2 */
+#define AT91_MATRIX_PRAS3 (AT91_MATRIX + 0x98) /* Priority Register A for Slave 3 */
+#define AT91_MATRIX_PRBS3 (AT91_MATRIX + 0x9C) /* Priority Register B for Slave 3 */
+#define AT91_MATRIX_PRAS4 (AT91_MATRIX + 0xA0) /* Priority Register A for Slave 4 */
+#define AT91_MATRIX_PRBS4 (AT91_MATRIX + 0xA4) /* Priority Register B for Slave 4 */
+#define AT91_MATRIX_PRAS5 (AT91_MATRIX + 0xA8) /* Priority Register A for Slave 5 */
+#define AT91_MATRIX_PRBS5 (AT91_MATRIX + 0xAC) /* Priority Register B for Slave 5 */
+#define AT91_MATRIX_PRAS6 (AT91_MATRIX + 0xB0) /* Priority Register A for Slave 6 */
+#define AT91_MATRIX_PRBS6 (AT91_MATRIX + 0xB4) /* Priority Register B for Slave 6 */
+#define AT91_MATRIX_PRAS7 (AT91_MATRIX + 0xB8) /* Priority Register A for Slave 7 */
+#define AT91_MATRIX_PRBS7 (AT91_MATRIX + 0xBC) /* Priority Register B for Slave 7 */
+#define AT91_MATRIX_PRAS8 (AT91_MATRIX + 0xC0) /* Priority Register A for Slave 8 */
+#define AT91_MATRIX_PRBS8 (AT91_MATRIX + 0xC4) /* Priority Register B for Slave 8 */
+#define AT91_MATRIX_PRAS9 (AT91_MATRIX + 0xC8) /* Priority Register A for Slave 9 */
+#define AT91_MATRIX_PRBS9 (AT91_MATRIX + 0xCC) /* Priority Register B for Slave 9 */
+#define AT91_MATRIX_M0PR (3 << 0) /* Master 0 Priority */
+#define AT91_MATRIX_M1PR (3 << 4) /* Master 1 Priority */
+#define AT91_MATRIX_M2PR (3 << 8) /* Master 2 Priority */
+#define AT91_MATRIX_M3PR (3 << 12) /* Master 3 Priority */
+#define AT91_MATRIX_M4PR (3 << 16) /* Master 4 Priority */
+#define AT91_MATRIX_M5PR (3 << 20) /* Master 5 Priority */
+#define AT91_MATRIX_M6PR (3 << 24) /* Master 6 Priority */
+#define AT91_MATRIX_M7PR (3 << 28) /* Master 7 Priority */
+#define AT91_MATRIX_M8PR (3 << 0) /* Master 8 Priority (in Register B) */
+#define AT91_MATRIX_M9PR (3 << 4) /* Master 9 Priority (in Register B) */
+#define AT91_MATRIX_M10PR (3 << 8) /* Master 10 Priority (in Register B) */
+#define AT91_MATRIX_M11PR (3 << 12) /* Master 11 Priority (in Register B) */
+
+#define AT91_MATRIX_MRCR (AT91_MATRIX + 0x100) /* Master Remap Control Register */
+#define AT91_MATRIX_RCB0 (1 << 0) /* Remap Command for AHB Master 0 (ARM926EJ-S Instruction Master) */
+#define AT91_MATRIX_RCB1 (1 << 1) /* Remap Command for AHB Master 1 (ARM926EJ-S Data Master) */
+#define AT91_MATRIX_RCB2 (1 << 2)
+#define AT91_MATRIX_RCB3 (1 << 3)
+#define AT91_MATRIX_RCB4 (1 << 4)
+#define AT91_MATRIX_RCB5 (1 << 5)
+#define AT91_MATRIX_RCB6 (1 << 6)
+#define AT91_MATRIX_RCB7 (1 << 7)
+#define AT91_MATRIX_RCB8 (1 << 8)
+#define AT91_MATRIX_RCB9 (1 << 9)
+#define AT91_MATRIX_RCB10 (1 << 10)
+#define AT91_MATRIX_RCB11 (1 << 11)
+
+#define AT91_MPBS0_SFR (AT91_MATRIX + 0x114) /* MPBlock Slave 0 Special Function Register */
+#define AT91_MPBS1_SFR (AT91_MATRIX + 0x11C) /* MPBlock Slave 1 Special Function Register */
+
+#define AT91_MATRIX_EBICSA (AT91_MATRIX + 0x120) /* EBI Chip Select Assignment Register */
+#define AT91_MATRIX_EBI_CS1A (1 << 1) /* Chip Select 1 Assignment */
+#define AT91_MATRIX_EBI_CS1A_SMC (0 << 1)
+#define AT91_MATRIX_EBI_CS1A_BCRAMC (1 << 1)
+#define AT91_MATRIX_EBI_CS3A (1 << 3) /* Chip Select 3 Assignment */
+#define AT91_MATRIX_EBI_CS3A_SMC (0 << 3)
+#define AT91_MATRIX_EBI_CS3A_SMC_SMARTMEDIA (1 << 3)
+#define AT91_MATRIX_EBI_CS4A (1 << 4) /* Chip Select 4 Assignment */
+#define AT91_MATRIX_EBI_CS4A_SMC (0 << 4)
+#define AT91_MATRIX_EBI_CS4A_SMC_CF1 (1 << 4)
+#define AT91_MATRIX_EBI_CS5A (1 << 5) /* Chip Select 5 Assignment */
+#define AT91_MATRIX_EBI_CS5A_SMC (0 << 5)
+#define AT91_MATRIX_EBI_CS5A_SMC_CF2 (1 << 5)
+#define AT91_MATRIX_EBI_DBPUC (1 << 8) /* Data Bus Pull-up Configuration */
+#define AT91_MATRIX_EBI_DQSPDC (1 << 9) /* Data Qualifier Strobe Pull-Down Configuration */
+#define AT91_MATRIX_EBI_VDDIOMSEL (1 << 16) /* Memory voltage selection */
+#define AT91_MATRIX_EBI_VDDIOMSEL_1_8V (0 << 16)
+#define AT91_MATRIX_EBI_VDDIOMSEL_3_3V (1 << 16)
+
+#define AT91_MPBS2_SFR (AT91_MATRIX + 0x12C) /* MPBlock Slave 2 Special Function Register */
+#define AT91_MPBS3_SFR (AT91_MATRIX + 0x130) /* MPBlock Slave 3 Special Function Register */
+#define AT91_APB_SFR (AT91_MATRIX + 0x134) /* APB Bridge Special Function Register */
+
+#endif
--- /dev/null
+/*
+ * include/asm-arm/arch-at91/at91sam926x_mc.h
+ *
+ * Memory Controllers (SMC, SDRAMC) - System peripherals registers.
+ * Based on AT91SAM9261 datasheet revision D.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91SAM926x_MC_H
+#define AT91SAM926x_MC_H
+
+/* SDRAM Controller (SDRAMC) registers */
+#define AT91_SDRAMC_MR (AT91_SDRAMC + 0x00) /* SDRAM Controller Mode Register */
+#define AT91_SDRAMC_MODE (0xf << 0) /* Command Mode */
+#define AT91_SDRAMC_MODE_NORMAL 0
+#define AT91_SDRAMC_MODE_NOP 1
+#define AT91_SDRAMC_MODE_PRECHARGE 2
+#define AT91_SDRAMC_MODE_LMR 3
+#define AT91_SDRAMC_MODE_REFRESH 4
+#define AT91_SDRAMC_MODE_EXT_LMR 5
+#define AT91_SDRAMC_MODE_DEEP 6
+
+#define AT91_SDRAMC_TR (AT91_SDRAMC + 0x04) /* SDRAM Controller Refresh Timer Register */
+#define AT91_SDRAMC_COUNT (0xfff << 0) /* Refresh Timer Counter */
+
+#define AT91_SDRAMC_CR (AT91_SDRAMC + 0x08) /* SDRAM Controller Configuration Register */
+#define AT91_SDRAMC_NC (3 << 0) /* Number of Column Bits */
+#define AT91_SDRAMC_NC_8 (0 << 0)
+#define AT91_SDRAMC_NC_9 (1 << 0)
+#define AT91_SDRAMC_NC_10 (2 << 0)
+#define AT91_SDRAMC_NC_11 (3 << 0)
+#define AT91_SDRAMC_NR (3 << 2) /* Number of Row Bits */
+#define AT91_SDRAMC_NR_11 (0 << 2)
+#define AT91_SDRAMC_NR_12 (1 << 2)
+#define AT91_SDRAMC_NR_13 (2 << 2)
+#define AT91_SDRAMC_NB (1 << 4) /* Number of Banks */
+#define AT91_SDRAMC_NB_2 (0 << 4)
+#define AT91_SDRAMC_NB_4 (1 << 4)
+#define AT91_SDRAMC_CAS (3 << 5) /* CAS Latency */
+#define AT91_SDRAMC_CAS_1 (1 << 5)
+#define AT91_SDRAMC_CAS_2 (2 << 5)
+#define AT91_SDRAMC_CAS_3 (3 << 5)
+#define AT91_SDRAMC_DBW (1 << 7) /* Data Bus Width */
+#define AT91_SDRAMC_DBW_32 (0 << 7)
+#define AT91_SDRAMC_DBW_16 (1 << 7)
+#define AT91_SDRAMC_TWR (0xf << 8) /* Write Recovery Delay */
+#define AT91_SDRAMC_TRC (0xf << 12) /* Row Cycle Delay */
+#define AT91_SDRAMC_TRP (0xf << 16) /* Row Precharge Delay */
+#define AT91_SDRAMC_TRCD (0xf << 20) /* Row to Column Delay */
+#define AT91_SDRAMC_TRAS (0xf << 24) /* Active to Precharge Delay */
+#define AT91_SDRAMC_TXSR (0xf << 28) /* Exit Self Refresh to Active Delay */
+
+#define AT91_SDRAMC_LPR (AT91_SDRAMC + 0x10) /* SDRAM Controller Low Power Register */
+#define AT91_SDRAMC_LPCB (3 << 0) /* Low-power Configurations */
+#define AT91_SDRAMC_LPCB_DISABLE 0
+#define AT91_SDRAMC_LPCB_SELF_REFRESH 1
+#define AT91_SDRAMC_LPCB_POWER_DOWN 2
+#define AT91_SDRAMC_LPCB_DEEP_POWER_DOWN 3
+#define AT91_SDRAMC_PASR (7 << 4) /* Partial Array Self Refresh */
+#define AT91_SDRAMC_TCSR (3 << 8) /* Temperature Compensated Self Refresh */
+#define AT91_SDRAMC_DS (3 << 10) /* Drive Strenght */
+#define AT91_SDRAMC_TIMEOUT (3 << 12) /* Time to define when Low Power Mode is enabled */
+#define AT91_SDRAMC_TIMEOUT_0_CLK_CYCLES (0 << 12)
+#define AT91_SDRAMC_TIMEOUT_64_CLK_CYCLES (1 << 12)
+#define AT91_SDRAMC_TIMEOUT_128_CLK_CYCLES (2 << 12)
+
+#define AT91_SDRAMC_IER (AT91_SDRAMC + 0x14) /* SDRAM Controller Interrupt Enable Register */
+#define AT91_SDRAMC_IDR (AT91_SDRAMC + 0x18) /* SDRAM Controller Interrupt Disable Register */
+#define AT91_SDRAMC_IMR (AT91_SDRAMC + 0x1C) /* SDRAM Controller Interrupt Mask Register */
+#define AT91_SDRAMC_ISR (AT91_SDRAMC + 0x20) /* SDRAM Controller Interrupt Status Register */
+#define AT91_SDRAMC_RES (1 << 0) /* Refresh Error Status */
+
+#define AT91_SDRAMC_MDR (AT91_SDRAMC + 0x24) /* SDRAM Memory Device Register */
+#define AT91_SDRAMC_MD (3 << 0) /* Memory Device Type */
+#define AT91_SDRAMC_MD_SDRAM 0
+#define AT91_SDRAMC_MD_LOW_POWER_SDRAM 1
+
+
+/* Static Memory Controller (SMC) registers */
+#define AT91_SMC_SETUP(n) (AT91_SMC + 0x00 + ((n)*0x10)) /* Setup Register for CS n */
+#define AT91_SMC_NWESETUP (0x3f << 0) /* NWE Setup Length */
+#define AT91_SMC_NWESETUP_(x) ((x) << 0)
+#define AT91_SMC_NCS_WRSETUP (0x3f << 8) /* NCS Setup Length in Write Access */
+#define AT91_SMC_NCS_WRSETUP_(x) ((x) << 8)
+#define AT91_SMC_NRDSETUP (0x3f << 16) /* NRD Setup Length */
+#define AT91_SMC_NRDSETUP_(x) ((x) << 16)
+#define AT91_SMC_NCS_RDSETUP (0x3f << 24) /* NCS Setup Length in Read Access */
+#define AT91_SMC_NCS_RDSETUP_(x) ((x) << 24)
+
+#define AT91_SMC_PULSE(n) (AT91_SMC + 0x04 + ((n)*0x10)) /* Pulse Register for CS n */
+#define AT91_SMC_NWEPULSE (0x7f << 0) /* NWE Pulse Length */
+#define AT91_SMC_NWEPULSE_(x) ((x) << 0)
+#define AT91_SMC_NCS_WRPULSE (0x7f << 8) /* NCS Pulse Length in Write Access */
+#define AT91_SMC_NCS_WRPULSE_(x)((x) << 8)
+#define AT91_SMC_NRDPULSE (0x7f << 16) /* NRD Pulse Length */
+#define AT91_SMC_NRDPULSE_(x) ((x) << 16)
+#define AT91_SMC_NCS_RDPULSE (0x7f << 24) /* NCS Pulse Length in Read Access */
+#define AT91_SMC_NCS_RDPULSE_(x)((x) << 24)
+
+#define AT91_SMC_CYCLE(n) (AT91_SMC + 0x08 + ((n)*0x10)) /* Cycle Register for CS n */
+#define AT91_SMC_NWECYCLE (0x1ff << 0 ) /* Total Write Cycle Length */
+#define AT91_SMC_NWECYCLE_(x) ((x) << 0)
+#define AT91_SMC_NRDCYCLE (0x1ff << 16) /* Total Read Cycle Length */
+#define AT91_SMC_NRDCYCLE_(x) ((x) << 16)
+
+#define AT91_SMC_MODE(n) (AT91_SMC + 0x0c + ((n)*0x10)) /* Mode Register for CS n */
+#define AT91_SMC_READMODE (1 << 0) /* Read Mode */
+#define AT91_SMC_WRITEMODE (1 << 1) /* Write Mode */
+#define AT91_SMC_EXNWMODE (3 << 4) /* NWAIT Mode */
+#define AT91_SMC_EXNWMODE_DISABLE (0 << 4)
+#define AT91_SMC_EXNWMODE_FROZEN (2 << 4)
+#define AT91_SMC_EXNWMODE_READY (3 << 4)
+#define AT91_SMC_BAT (1 << 8) /* Byte Access Type */
+#define AT91_SMC_BAT_SELECT (0 << 8)
+#define AT91_SMC_BAT_WRITE (1 << 8)
+#define AT91_SMC_DBW (3 << 12) /* Data Bus Width */
+#define AT91_SMC_DBW_8 (0 << 12)
+#define AT91_SMC_DBW_16 (1 << 12)
+#define AT91_SMC_DBW_32 (2 << 12)
+#define AT91_SMC_TDF (0xf << 16) /* Data Float Time. */
+#define AT91_SMC_TDF_(x) ((x) << 16)
+#define AT91_SMC_TDFMODE (1 << 20) /* TDF Optimization - Enabled */
+#define AT91_SMC_PMEN (1 << 24) /* Page Mode Enabled */
+#define AT91_SMC_PS (3 << 28) /* Page Size */
+#define AT91_SMC_PS_4 (0 << 28)
+#define AT91_SMC_PS_8 (1 << 28)
+#define AT91_SMC_PS_16 (2 << 28)
+#define AT91_SMC_PS_32 (3 << 28)
+
+#if defined(AT91_SMC1) /* The AT91SAM9263 has 2 Static Memory contollers */
+#define AT91_SMC1_SETUP(n) (AT91_SMC1 + 0x00 + ((n)*0x10)) /* Setup Register for CS n */
+#define AT91_SMC1_PULSE(n) (AT91_SMC1 + 0x04 + ((n)*0x10)) /* Pulse Register for CS n */
+#define AT91_SMC1_CYCLE(n) (AT91_SMC1 + 0x08 + ((n)*0x10)) /* Cycle Register for CS n */
+#define AT91_SMC1_MODE(n) (AT91_SMC1 + 0x0c + ((n)*0x10)) /* Mode Register for CS n */
+#endif
+
+#endif
projects / oweals / u-boot.git / commitdiff