FSL DDR: Convert PM856 to new DDR code.
authorKumar Gala <galak@kernel.crashing.org>
Wed, 27 Aug 2008 04:52:07 +0000 (23:52 -0500)
committerKumar Gala <galak@kernel.crashing.org>
Wed, 27 Aug 2008 16:43:51 +0000 (11:43 -0500)
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
board/pm856/Makefile
board/pm856/ddr.c [new file with mode: 0644]
board/pm856/pm856.c
include/configs/PM856.h

index 2d71cbc516a6fe78cd98fdeb0da9c84a59d1d37a..52a756c8e3af3e123bd3a510ae6daf1bc6c7591f 100644 (file)
@@ -25,10 +25,13 @@ include $(TOPDIR)/config.mk
 
 LIB    = $(obj)lib$(BOARD).a
 
-COBJS  := $(BOARD).o law.o tlb.o
+COBJS-y        += $(BOARD).o
+COBJS-y        += law.o
+COBJS-y        += tlb.o
+COBJS-$(CONFIG_FSL_DDR1) += ddr.o
 
-SRCS   := $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS   := $(addprefix $(obj),$(COBJS))
+SRCS   := $(SOBJS:.o=.S) $(COBJS-y:.o=.c)
+OBJS   := $(addprefix $(obj),$(COBJS-y))
 SOBJS  := $(addprefix $(obj),$(SOBJS))
 
 $(LIB):        $(obj).depend $(OBJS) $(SOBJS)
diff --git a/board/pm856/ddr.c b/board/pm856/ddr.c
new file mode 100644 (file)
index 0000000..45372f4
--- /dev/null
@@ -0,0 +1,70 @@
+/*
+ * Copyright 2008 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * Version 2 as published by the Free Software Foundation.
+ */
+
+#include <common.h>
+#include <i2c.h>
+
+#include <asm/fsl_ddr_sdram.h>
+
+static void
+get_spd(ddr1_spd_eeprom_t *spd, unsigned char i2c_address)
+{
+       i2c_read(i2c_address, 0, 1, (uchar *)spd, sizeof(ddr1_spd_eeprom_t));
+}
+
+
+unsigned int
+fsl_ddr_get_mem_data_rate(void)
+{
+       return get_ddr_freq(0);
+}
+
+
+void
+fsl_ddr_get_spd(ddr1_spd_eeprom_t *ctrl_dimms_spd,
+                     unsigned int ctrl_num)
+{
+       unsigned int i;
+       unsigned int i2c_address = 0;
+
+       for (i = 0; i < CONFIG_DIMM_SLOTS_PER_CTLR; i++) {
+               if (ctrl_num == 0 && i == 0) {
+                       i2c_address = SPD_EEPROM_ADDRESS;
+               }
+               get_spd(&(ctrl_dimms_spd[i]), i2c_address);
+       }
+}
+
+void fsl_ddr_board_options(memctl_options_t *popts, unsigned int ctrl_num)
+{
+       /*
+        * Factors to consider for CPO:
+        *      - frequency
+        *      - ddr1 vs. ddr2
+        */
+       popts->cpo_override = 0;
+
+       /*
+        * Factors to consider for write data delay:
+        *      - number of DIMMs
+        *
+        * 1 = 1/4 clock delay
+        * 2 = 1/2 clock delay
+        * 3 = 3/4 clock delay
+        * 4 = 1   clock delay
+        * 5 = 5/4 clock delay
+        * 6 = 3/2 clock delay
+        */
+       popts->write_data_delay = 3;
+
+       /*
+        * Factors to consider for half-strength driver enable:
+        *      - number of DIMMs installed
+        */
+       popts->half_strength_driver_enable = 0;
+}
index bf325f89efc57fb821bd4ed8007733b362994435..bd4c0651ae917524a713078f2409c592cb9b375b 100644 (file)
@@ -28,7 +28,9 @@
 #include <common.h>
 #include <pci.h>
 #include <asm/processor.h>
+#include <asm/mmu.h>
 #include <asm/immap_85xx.h>
+#include <asm/fsl_ddr_sdram.h>
 #include <ioports.h>
 #include <spd_sdram.h>
 #include <miiphy.h>
@@ -260,7 +262,9 @@ initdram(int board_type)
 #endif
 
 #if defined(CONFIG_SPD_EEPROM)
-       dram_size = spd_sdram ();
+       dram_size = fsl_ddr_sdram();
+       dram_size = setup_ddr_tlbs(dram_size / 0x100000);
+       dram_size *= 0x100000;
 #else
        dram_size = fixed_sdram ();
 #endif
index b2cf06000fda0a3ae53d2680934bdacbe8dfb096..244f09aa95f86e7e194b637f08ec6acda94ba305 100644 (file)
 #define CONFIG_PCI
 #define CONFIG_TSEC_ENET               /* tsec ethernet support */
 #define CONFIG_ENV_OVERWRITE
-#undef  CONFIG_SPD_EEPROM              /* do not use SPD EEPROM for DDR setup*/
-#define CONFIG_DDR_ECC                 /* only for ECC DDR module */
-#define CONFIG_DDR_DLL                 /* possible DLL fix needed */
-#define CONFIG_DDR_2T_TIMING           /* Sets the 2T timing bit */
-#define CONFIG_MEM_INIT_VALUE          0xDEADBEEF
 
 #define CONFIG_FSL_LAW         1       /* Use common FSL init code */
 
 #define CFG_CCSRBAR_PHYS       CFG_CCSRBAR     /* physical addr of CCSRBAR */
 #define CFG_IMMR               CFG_CCSRBAR     /* PQII uses CFG_IMMR */
 
+/* DDR Setup */
+#define CONFIG_FSL_DDR1
+#undef CONFIG_FSL_DDR_INTERACTIVE
+#undef CONFIG_SPD_EEPROM               /* Use SPD EEPROM for DDR setup */
+#undef CONFIG_DDR_SPD
+#define CONFIG_DDR_DLL                      /* possible DLL fix needed */
+#define CONFIG_DDR_ECC                     /* only for ECC DDR module */
 
-/*
- * DDR Setup
- */
-#define CFG_DDR_SDRAM_BASE     0x00000000      /* DDR is system memory*/
-#define CFG_SDRAM_BASE         CFG_DDR_SDRAM_BASE
-
-#if defined(CONFIG_SPD_EEPROM)
-    /*
-     * Determine DDR configuration from I2C interface.
-     */
-    #define SPD_EEPROM_ADDRESS 0x58            /* DDR DIMM */
-
-#else
-    /*
-     * Manually set up DDR parameters
-     */
-    #define CFG_SDRAM_SIZE     256             /* DDR is 256 MB */
-    #define CFG_DDR_CS0_BNDS   0x0000000f      /* 0-256MB */
-    #define CFG_DDR_CS0_CONFIG 0x80000102
-    #define CFG_DDR_TIMING_1   0x47444321
-    #define CFG_DDR_TIMING_2   0x00000800      /* P9-45,may need tuning */
-    #define CFG_DDR_CONTROL    0xc2008000      /* unbuffered,no DYN_PWR */
-    #define CFG_DDR_MODE       0x00000062      /* DLL,normal,seq,4/2.5 */
-    #define CFG_DDR_INTERVAL   0x045b0100      /* autocharge,no open page */
-#endif
+#define CONFIG_MEM_INIT_VALUE  0xDeadBeef
 
+#define CFG_DDR_SDRAM_BASE     0x00000000
+#define CFG_SDRAM_BASE         CFG_DDR_SDRAM_BASE
+#define CONFIG_VERY_BIG_RAM
+
+#define CONFIG_NUM_DDR_CONTROLLERS     1
+#define CONFIG_DIMM_SLOTS_PER_CTLR     1
+#define CONFIG_CHIP_SELECTS_PER_CTRL   2
+
+/* I2C addresses of SPD EEPROMs */
+#define SPD_EEPROM_ADDRESS     0x58    /* CTLR 0 DIMM 0 */
+
+/* Manually set up DDR parameters */
+#define CFG_SDRAM_SIZE 256             /* DDR is 256 MB */
+#define CFG_DDR_CS0_BNDS       0x0000000f      /* 0-256MB */
+#define CFG_DDR_CS0_CONFIG     0x80000102
+#define CFG_DDR_TIMING_1       0x47444321
+#define CFG_DDR_TIMING_2       0x00000800      /* P9-45,may need tuning */
+#define CFG_DDR_CONTROL        0xc2008000      /* unbuffered,no DYN_PWR */
+#define CFG_DDR_MODE   0x00000062      /* DLL,normal,seq,4/2.5 */
+#define CFG_DDR_INTERVAL       0x045b0100      /* autocharge,no open page */
 
 /*
  * SDRAM on the Local Bus