corenet_ds: Extend board specific parameters
authorYork Sun <yorksun@freescale.com>
Mon, 10 Jan 2011 12:03:02 +0000 (12:03 +0000)
committerKumar Gala <galak@kernel.crashing.org>
Thu, 20 Jan 2011 04:58:24 +0000 (22:58 -0600)
Extend board specific parameters to include cpo, write leveling override
Extend write leveling sample to 0xf
Adding rcw overrid for quad-rank RDIMMs

Signed-off-by: York Sun <yorksun@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
arch/powerpc/include/asm/fsl_ddr_sdram.h
board/freescale/corenet_ds/ddr.c

index e6f0d3275a65c4d0bc8e8c7d8a0f5061d57a7a21..852e5c3bd031bf194fb6830bda0affa5e43ad5dd 100644 (file)
@@ -120,6 +120,9 @@ typedef ddr3_spd_eeprom_t generic_spd_eeprom_t;
 #define MD_CNTL_WRCW           0x00080000
 #define MD_CNTL_MD_VALUE(x)    (x & 0x0000FFFF)
 
+/* DDR_CDR1 */
+#define DDR_CDR1_DHC_EN        0x80000000
+
 /* Record of register values computed */
 typedef struct fsl_ddr_cfg_regs_s {
        struct {
index 85b6c78efb167de1eb634dcebd903c453f2f53fe..6660b01c82589e526fcd7de581dd75c430d52f56 100644 (file)
@@ -56,12 +56,14 @@ phys_size_t fixed_sdram(void)
                        strmhz(buf, sysinfo.freqDDRBus));
 
        ddr_size = (phys_size_t) CONFIG_SYS_SDRAM_SIZE * 1024 * 1024;
+       ddr_cfg_regs.ddr_cdr1 = DDR_CDR1_DHC_EN;
        fsl_ddr_set_memctl_regs(&ddr_cfg_regs, 0);
 
 #if (CONFIG_NUM_DDR_CONTROLLERS == 2)
        memcpy(&ddr_cfg_regs,
                fixed_ddr_parm_1[i].ddr_settings,
                sizeof(ddr_cfg_regs));
+       ddr_cfg_regs.ddr_cdr1 = DDR_CDR1_DHC_EN;
        fsl_ddr_set_memctl_regs(&ddr_cfg_regs, 1);
 #endif
 
@@ -143,6 +145,7 @@ typedef struct {
        u32 datarate_mhz_high;
        u32 n_ranks;
        u32 clk_adjust;
+       u32 wrlvl_start;
        u32 cpo;
        u32 write_data_delay;
        u32 force_2T;
@@ -162,57 +165,61 @@ typedef struct {
 /* XXX: Single rank at 800 MHz is OK.  */
 const board_specific_parameters_t board_specific_parameters[][30] = {
        {
-       /*      memory controller 0                     */
-       /*        lo|  hi|  num|  clk| cpo|wrdata|2T    */
-       /*       mhz| mhz|ranks|adjst|    | delay|      */
-               {  0, 333,    4,    6,   7,    3,  0},
-               {334, 400,    4,    6,   9,    3,  0},
-               {401, 549,    4,    6,  11,    3,  0},
-               {550, 680,    4,    1,  10,    5,  0},
-               {681, 850,    4,    1,  12,    5,  0},
-               {851, 1050,   4,    1,  12,    5,  0},
-               {1051, 1250,  4,    1,  15,    4,  0},
-               {1251, 1350,  4,    1,  15,    4,  0},
-               {  0, 333,    2,    6,   7,    3,  0},
-               {334, 400,    2,    6,   9,    3,  0},
-               {401, 549,    2,    6,  11,    3,  0},
-               {550, 680,    2,    1,  10,    5,  0},
-               {681, 850,    2,    1,  12,    5,  0},
-               {851, 1050,   2,    1,  12,    5,  0},
-               {1051, 1250,  2,    1,  15,    4,  0},
-               {1251, 1350,  2,    1,  15,    4,  0},
-               {  0, 333,    1,    6,   7,    3,  0},
-               {334, 400,    1,    6,   9,    3,  0},
-               {401, 549,    1,    6,  11,    3,  0},
-               {550, 680,    1,    1,  10,    5,  0},
-               {681, 850,    1,    1,  12,    5,  0}
+       /*
+        * memory controller 0
+        *  lo|  hi|  num|  clk| wrlvl | cpo  |wrdata|2T
+        * mhz| mhz|ranks|adjst| start | delay|
+        */
+               {  0, 333,    4,    5,     7,   0xff,    2,  0},
+               {334, 400,    4,    5,     7,   0xff,    2,  0},
+               {401, 549,    4,    5,     7,   0xff,    2,  0},
+               {550, 680,    4,    5,     7,   0xff,    2,  0},
+               {681, 850,    4,    5,     7,   0xff,    2,  0},
+               {851, 1050,   4,    5,     7,   0xff,    2,  0},
+               {1051, 1250,  4,    5,     8,   0xff,    2,  0},
+               {1251, 1350,  4,    5,     9,   0xff,    2,  0},
+               {  0, 333,    2,    5,     7,   0xff,    2,  0},
+               {334, 400,    2,    5,     7,   0xff,    2,  0},
+               {401, 549,    2,    5,     7,   0xff,    2,  0},
+               {550, 680,    2,    5,     7,   0xff,    2,  0},
+               {681, 850,    2,    5,     7,   0xff,    2,  0},
+               {851, 1050,   2,    5,     7,   0xff,    2,  0},
+               {1051, 1250,  2,    5,     7,   0xff,    2,  0},
+               {1251, 1350,  2,    5,     7,   0xff,    2,  0},
+               {  0, 333,    1,    5,     7,   0xff,    2,  0},
+               {334, 400,    1,    5,     7,   0xff,    2,  0},
+               {401, 549,    1,    5,     7,   0xff,    2,  0},
+               {550, 680,    1,    5,     7,   0xff,    2,  0},
+               {681, 850,    1,    5,     7,   0xff,    2,  0}
        },
 
        {
-       /*      memory controller 1                     */
-       /*        lo|  hi|  num|  clk| cpo|wrdata|2T    */
-       /*       mhz| mhz|ranks|adjst|    | delay|      */
-               {  0, 333,    4,    6,   7,    3,  0},
-               {334, 400,    4,    6,   9,    3,  0},
-               {401, 549,    4,    6,  11,    3,  0},
-               {550, 680,    4,    1,  10,    5,  0},
-               {681, 850,    4,    1,  12,    5,  0},
-               {851, 1050,   4,    1,  12,    5,  0},
-               {1051, 1250,  4,    1,  15,    4,  0},
-               {1251, 1350,  4,    1,  15,    4,  0},
-               {  0, 333,    2,     6,  7,    3,  0},
-               {334, 400,    2,     6,  9,    3,  0},
-               {401, 549,    2,     6, 11,    3,  0},
-               {550, 680,    2,     1, 11,    6,  0},
-               {681, 850,    2,     1, 13,    6,  0},
-               {851, 1050,   2,     1, 13,    6,  0},
-               {1051, 1250,  2,     1, 15,    4,  0},
-               {1251, 1350,  2,     1, 15,    4,  0},
-               {  0, 333,    1,     6,  7,    3,  0},
-               {334, 400,    1,     6,  9,    3,  0},
-               {401, 549,    1,     6, 11,    3,  0},
-               {550, 680,    1,     1, 11,    6,  0},
-               {681, 850,    1,     1, 13,    6,  0}
+       /*
+        * memory controller 1
+        *  lo|  hi|  num|  clk| wrlvl | cpo  |wrdata|2T
+        * mhz| mhz|ranks|adjst| start | delay|
+        */
+               {  0, 333,    4,    5,     7,   0xff,    2,  0},
+               {334, 400,    4,    5,     7,   0xff,    2,  0},
+               {401, 549,    4,    5,     7,   0xff,    2,  0},
+               {550, 680,    4,    5,     7,   0xff,    2,  0},
+               {681, 850,    4,    5,     7,   0xff,    2,  0},
+               {851, 1050,   4,    5,     7,   0xff,    2,  0},
+               {1051, 1250,  4,    5,     8,   0xff,    2,  0},
+               {1251, 1350,  4,    5,     9,   0xff,    2,  0},
+               {  0, 333,    2,    5,     7,   0xff,    2,  0},
+               {334, 400,    2,    5,     7,   0xff,    2,  0},
+               {401, 549,    2,    5,     7,   0xff,    2,  0},
+               {550, 680,    2,    5,     7,   0xff,    2,  0},
+               {681, 850,    2,    5,     7,   0xff,    2,  0},
+               {851, 1050,   2,    5,     7,   0xff,    2,  0},
+               {1051, 1250,  2,    5,     7,   0xff,    2,  0},
+               {1251, 1350,  2,    5,     7,   0xff,    2,  0},
+               {  0, 333,    1,    5,     7,   0xff,    2,  0},
+               {334, 400,    1,    5,     7,   0xff,    2,  0},
+               {401, 549,    1,    5,     7,   0xff,    2,  0},
+               {550, 680,    1,    5,     7,   0xff,    2,  0},
+               {681, 850,    1,    5,     7,   0xff,    2,  0}
        }
 };
 
@@ -227,37 +234,18 @@ void fsl_ddr_board_options(memctl_options_t *popts,
        u32 i;
        ulong ddr_freq;
 
-       /* set odt_rd_cfg and odt_wr_cfg. If the there is only one dimm in
-        * that controller, set odt_wr_cfg to 4 for CS0, and 0 to CS1. If
-        * there are two dimms in the controller, set odt_rd_cfg to 3 and
-        * odt_wr_cfg to 3 for the even CS, 0 for the odd CS.
-        */
-       for (i = 0; i < CONFIG_CHIP_SELECTS_PER_CTRL; i++) {
-               if (i&1) {      /* odd CS */
-                       popts->cs_local_opts[i].odt_rd_cfg = 0;
-                       popts->cs_local_opts[i].odt_wr_cfg = 1;
-               } else {        /* even CS */
-                       if (CONFIG_DIMM_SLOTS_PER_CTLR == 1) {
-                               popts->cs_local_opts[i].odt_rd_cfg = 0;
-                               popts->cs_local_opts[i].odt_wr_cfg = 1;
-                       } else if (CONFIG_DIMM_SLOTS_PER_CTLR == 2) {
-                       popts->cs_local_opts[i].odt_rd_cfg = 3;
-                       popts->cs_local_opts[i].odt_wr_cfg = 3;
-                       }
-               }
-       }
-
        /* Get clk_adjust, cpo, write_data_delay,2T, according to the board ddr
         * freqency and n_banks specified in board_specific_parameters table.
         */
        ddr_freq = get_ddr_freq(0) / 1000000;
        for (i = 0; i < num_params; i++) {
                if (ddr_freq >= pbsp->datarate_mhz_low &&
-                   ddr_freq <= pbsp->datarate_mhz_high &&
-                   pdimm->n_ranks == pbsp->n_ranks) {
-                       popts->cpo_override = 0xff; /* force auto CPO calibration */
-                       popts->write_data_delay = 2;
-                       popts->clk_adjust = 5; /* Force value to be 5/8 clock cycle */
+                       ddr_freq <= pbsp->datarate_mhz_high &&
+                       pdimm[0].n_ranks == pbsp->n_ranks) {
+                       popts->cpo_override = pbsp->cpo;
+                       popts->write_data_delay = pbsp->write_data_delay;
+                       popts->clk_adjust = pbsp->clk_adjust;
+                       popts->wrlvl_start = pbsp->wrlvl_start;
                        popts->twoT_en = pbsp->force_2T;
                }
                pbsp++;
@@ -272,17 +260,32 @@ void fsl_ddr_board_options(memctl_options_t *popts,
         * Write leveling override
         */
        popts->wrlvl_override = 1;
-       popts->wrlvl_sample = 0xa;
-       popts->wrlvl_start = 0x7;
+       popts->wrlvl_sample = 0xf;
+
        /*
         * Rtt and Rtt_WR override
         */
-       popts->rtt_override = 1;
-       popts->rtt_override_value = DDR3_RTT_120_OHM;
-       popts->rtt_wr_override_value = 0; /* Rtt_WR= dynamic ODT off */
+       popts->rtt_override = 0;
 
        /* Enable ZQ calibration */
        popts->zq_en = 1;
+
+       /* DHC_EN =1, ODT = 60 Ohm */
+       popts->ddr_cdr1 = DDR_CDR1_DHC_EN;
+
+       /* override SPD values. rcw_2 should vary at differnt speed */
+       if (pdimm[0].n_ranks == 4) {
+               popts->rcw_override = 1;
+               popts->rcw_1 = 0x000a5a00;
+               if (ddr_freq <= 800)
+                       popts->rcw_2 = 0x00000000;
+               else if (ddr_freq <= 1066)
+                       popts->rcw_2 = 0x00100000;
+               else if (ddr_freq <= 1333)
+                       popts->rcw_2 = 0x00200000;
+               else
+                       popts->rcw_2 = 0x00300000;
+       }
 }
 
 phys_size_t initdram(int board_type)