#include <common.h>
#include <asm/io.h>
+#include <fdtdec.h>
+#include <libfdt.h>
#include <altera.h>
#include <miiphy.h>
#include <netdev.h>
#include <asm/arch/scu.h>
#include <asm/pl310.h>
+#include <dt-bindings/reset/altr,rst-mgr.h>
+
DECLARE_GLOBAL_DATA_PTR;
static struct pl310_regs *const pl310 =
* DesignWare Ethernet initialization
*/
#ifdef CONFIG_ETH_DESIGNWARE
-int cpu_eth_init(bd_t *bis)
+static void dwmac_deassert_reset(const unsigned int of_reset_id)
{
-#if CONFIG_EMAC_BASE == SOCFPGA_EMAC0_ADDRESS
- const int physhift = SYSMGR_EMACGRP_CTRL_PHYSEL0_LSB;
- const u32 reset = SOCFPGA_RESET(EMAC0);
-#elif CONFIG_EMAC_BASE == SOCFPGA_EMAC1_ADDRESS
- const int physhift = SYSMGR_EMACGRP_CTRL_PHYSEL1_LSB;
- const u32 reset = SOCFPGA_RESET(EMAC1);
-#else
-#error "Incorrect CONFIG_EMAC_BASE value!"
-#endif
-
- /* Initialize EMAC. This needs to be done at least once per boot. */
-
- /*
- * Putting the EMAC controller to reset when configuring the PHY
- * interface select at System Manager
- */
- socfpga_per_reset(SOCFPGA_RESET(EMAC0), 1);
- socfpga_per_reset(SOCFPGA_RESET(EMAC1), 1);
+ u32 physhift, reset;
+
+ if (of_reset_id == EMAC0_RESET) {
+ physhift = SYSMGR_EMACGRP_CTRL_PHYSEL0_LSB;
+ reset = SOCFPGA_RESET(EMAC0);
+ } else if (of_reset_id == EMAC1_RESET) {
+ physhift = SYSMGR_EMACGRP_CTRL_PHYSEL1_LSB;
+ reset = SOCFPGA_RESET(EMAC1);
+ } else {
+ printf("GMAC: Invalid reset ID (%i)!\n", of_reset_id);
+ return;
+ }
/* Clearing emac0 PHY interface select to 0 */
clrbits_le32(&sysmgr_regs->emacgrp_ctrl,
/* Release the EMAC controller from reset */
socfpga_per_reset(reset, 0);
+}
+
+int cpu_eth_init(bd_t *bis)
+{
+ const void *fdt = gd->fdt_blob;
+ struct fdtdec_phandle_args args;
+ int nodes[2]; /* Max. two GMACs */
+ int ret, count;
+ int i, node;
+
+ /* Put both GMACs into RESET state. */
+ socfpga_per_reset(SOCFPGA_RESET(EMAC0), 1);
+ socfpga_per_reset(SOCFPGA_RESET(EMAC1), 1);
+
+ count = fdtdec_find_aliases_for_id(fdt, "ethernet",
+ COMPAT_ALTERA_SOCFPGA_DWMAC,
+ nodes, ARRAY_SIZE(nodes));
+ for (i = 0; i < count; i++) {
+ node = nodes[i];
+ if (node <= 0)
+ continue;
+
+ ret = fdtdec_parse_phandle_with_args(fdt, node, "resets",
+ "#reset-cells", 1, 0,
+ &args);
+ if (ret || (args.args_count != 1)) {
+ debug("GMAC%i: Failed to parse DT 'resets'!\n", i);
+ continue;
+ }
+
+ dwmac_deassert_reset(args.args[0]);
+ }
return 0;
}
COMPAT(SOCIONEXT_XHCI, "socionext,uniphier-xhci"),
COMPAT(COMPAT_INTEL_PCH, "intel,bd82x6x"),
COMPAT(COMPAT_INTEL_IRQ_ROUTER, "intel,irq-router"),
+ COMPAT(ALTERA_SOCFPGA_DWMAC, "altr,socfpga-stmmac"),
};
const char *fdtdec_get_compatible(enum fdt_compat_id id)