sunxi: Sync GR8 DTS and AXP209 with the kernel
authorMaxime Ripard <maxime.ripard@free-electrons.com>
Mon, 27 Feb 2017 17:22:14 +0000 (18:22 +0100)
committerJagan Teki <jagan@amarulasolutions.com>
Fri, 7 Apr 2017 05:53:46 +0000 (11:23 +0530)
Those DT will be part of 4.10, sync them so we can have our own config.

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Jagan Teki <jagan@openedev.com>
arch/arm/dts/Makefile
arch/arm/dts/axp209.dtsi
arch/arm/dts/sun5i-gr8-chip-pro.dts [new file with mode: 0644]
arch/arm/dts/sun5i-gr8.dtsi [new file with mode: 0644]

index 759a149f718883d90aab751883d6a16da1842e3d..17a7e8eb09e6cde2b70348e5ea52b10e8ab5916e 100644 (file)
@@ -228,6 +228,7 @@ dtb-$(CONFIG_MACH_SUN5I) += \
        sun5i-a13-olinuxino-micro.dtb \
        sun5i-a13-q8-tablet.dtb \
        sun5i-a13-utoo-p66.dtb \
+       sun5i-gr8-chip-pro.dtb \
        sun5i-r8-chip.dtb
 dtb-$(CONFIG_MACH_SUN6I) += \
        sun6i-a31-app4-evb1.dtb \
index afbe89c01df582a45e9480d1d2180dcaf3859935..675bb0f30825b44abf72581aecb4fdd024964eee 100644 (file)
        interrupt-controller;
        #interrupt-cells = <1>;
 
+       axp_gpio: gpio {
+               compatible = "x-powers,axp209-gpio";
+               gpio-controller;
+               #gpio-cells = <2>;
+       };
+
        regulators {
                /* Default work frequency for buck regulators */
                x-powers,dcdc-freq = <1500>;
diff --git a/arch/arm/dts/sun5i-gr8-chip-pro.dts b/arch/arm/dts/sun5i-gr8-chip-pro.dts
new file mode 100644 (file)
index 0000000..92a2dc6
--- /dev/null
@@ -0,0 +1,266 @@
+/*
+ * Copyright 2016 Free Electrons
+ * Copyright 2016 NextThing Co
+ *
+ * Maxime Ripard <maxime.ripard@free-electrons.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun5i-gr8.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+       model = "NextThing C.H.I.P. Pro";
+       compatible = "nextthing,chip-pro", "nextthing,gr8";
+
+       aliases {
+               i2c0 = &i2c0;
+               i2c1 = &i2c1;
+               serial0 = &uart1;
+               serial1 = &uart2;
+               serial2 = &uart3;
+       };
+
+       chosen {
+               stdout-path = "serial0:115200n8";
+       };
+
+       leds {
+               compatible = "gpio-leds";
+
+               status {
+                       label = "chip-pro:white:status";
+                       gpios = <&axp_gpio 2 GPIO_ACTIVE_HIGH>;
+                       default-state = "on";
+               };
+       };
+
+       mmc0_pwrseq: mmc0_pwrseq {
+               compatible = "mmc-pwrseq-simple";
+               pinctrl-names = "default";
+               pinctrl-0 = <&wifi_reg_on_pin_chip_pro>;
+               reset-gpios = <&pio 1 10 GPIO_ACTIVE_LOW>; /* PB10 */
+       };
+};
+
+&codec {
+       status = "okay";
+};
+
+&ehci0 {
+       status = "okay";
+};
+
+&i2c0 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&i2c0_pins_a>;
+       status = "okay";
+
+       axp209: pmic@34 {
+               reg = <0x34>;
+
+               /*
+               * The interrupt is routed through the "External Fast
+               * Interrupt Request" pin (ball G13 of the module)
+               * directly to the main interrupt controller, without
+               * any other controller interfering.
+               */
+               interrupts = <0>;
+       };
+};
+
+#include "axp209.dtsi"
+
+&i2c1 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&i2c1_pins_a>;
+       status = "disabled";
+};
+
+&i2s0 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&i2s0_mclk_pins_a>, <&i2s0_data_pins_a>;
+       status = "disabled";
+};
+
+&mmc0 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&mmc0_pins_a>;
+       vmmc-supply = <&reg_vcc3v3>;
+       mmc-pwrseq = <&mmc0_pwrseq>;
+       bus-width = <4>;
+       non-removable;
+       status = "okay";
+};
+
+&nfc {
+       pinctrl-names = "default";
+       pinctrl-0 = <&nand_pins_a &nand_cs0_pins_a &nand_rb0_pins_a>;
+       status = "okay";
+
+       nand@0 {
+               #address-cells = <2>;
+               #size-cells = <2>;
+               reg = <0>;
+               allwinner,rb = <0>;
+               nand-ecc-mode = "hw";
+       };
+};
+
+&ohci0 {
+       status = "okay";
+};
+
+&otg_sram {
+       status = "okay";
+};
+
+&pio {
+       usb0_id_pin_chip_pro: usb0-id-pin@0 {
+               allwinner,pins = "PG2";
+               allwinner,function = "gpio_in";
+               allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+               allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+       };
+
+       wifi_reg_on_pin_chip_pro: wifi-reg-on-pin@0 {
+               allwinner,pins = "PB10";
+               allwinner,function = "gpio_out";
+               allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+               allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+       };
+};
+
+&pwm {
+       pinctrl-names = "default";
+       pinctrl-0 = <&pwm0_pins_a>, <&pwm1_pins>;
+       status = "disabled";
+};
+
+&reg_dcdc2 {
+       regulator-min-microvolt = <1000000>;
+       regulator-max-microvolt = <1400000>;
+       regulator-name = "vdd-cpu";
+       regulator-always-on;
+};
+
+&reg_dcdc3 {
+       regulator-min-microvolt = <1000000>;
+       regulator-max-microvolt = <1300000>;
+       regulator-name = "vdd-sys";
+       regulator-always-on;
+};
+
+&reg_ldo1 {
+       regulator-name = "vdd-rtc";
+};
+
+&reg_ldo2 {
+       regulator-min-microvolt = <2700000>;
+       regulator-max-microvolt = <3300000>;
+       regulator-name = "avcc";
+       regulator-always-on;
+};
+
+/*
+ * Both LDO3 and LDO4 are used in parallel to power up the
+ * WiFi/BT chip.
+ */
+&reg_ldo3 {
+       regulator-min-microvolt = <3300000>;
+       regulator-max-microvolt = <3300000>;
+       regulator-name = "vcc-wifi-1";
+       regulator-always-on;
+};
+
+&reg_ldo4 {
+       regulator-min-microvolt = <3300000>;
+       regulator-max-microvolt = <3300000>;
+       regulator-name = "vcc-wifi-2";
+       regulator-always-on;
+};
+
+&uart1 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&uart1_pins_a>, <&uart1_cts_rts_pins_a>;
+       status = "okay";
+};
+
+&uart2 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&uart2_pins_a>, <&uart2_cts_rts_pins_a>;
+       status = "disabled";
+};
+
+&uart3 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&uart3_pins_a>, <&uart3_cts_rts_pins_a>;
+       status = "okay";
+};
+
+&usb_otg {
+       /*
+        * The CHIP Pro doesn't have a controllable VBUS, nor does it
+        * have any 5v rail on the board itself.
+        *
+        * If one wants to use it as a true OTG port, it should be
+        * done in the baseboard, and its DT / overlay will add it.
+        */
+       dr_mode = "otg";
+       status = "okay";
+};
+
+&usb_power_supply {
+       status = "okay";
+};
+
+&usbphy {
+       pinctrl-names = "default";
+       pinctrl-0 = <&usb0_id_pin_chip_pro>;
+       usb0_id_det-gpio = <&pio 6 2 GPIO_ACTIVE_HIGH>; /* PG2 */
+       usb0_vbus_power-supply = <&usb_power_supply>;
+       usb1_vbus-supply = <&reg_vcc5v0>;
+       status = "okay";
+};
diff --git a/arch/arm/dts/sun5i-gr8.dtsi b/arch/arm/dts/sun5i-gr8.dtsi
new file mode 100644 (file)
index 0000000..ea86d4d
--- /dev/null
@@ -0,0 +1,1132 @@
+/*
+ * Copyright 2016 Mylène Josserand
+ *
+ * Mylène Josserand <mylene.josserand@free-electrons.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This library is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This library is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include <dt-bindings/clock/sun4i-a10-pll2.h>
+#include <dt-bindings/dma/sun4i-a10.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
+
+/ {
+       interrupt-parent = <&intc>;
+       #address-cells = <1>;
+       #size-cells = <1>;
+
+       cpus {
+               #address-cells = <1>;
+               #size-cells = <0>;
+
+               cpu0: cpu@0 {
+                       device_type = "cpu";
+                       compatible = "arm,cortex-a8";
+                       reg = <0x0>;
+                       clocks = <&cpu>;
+               };
+       };
+
+       clocks {
+               #address-cells = <1>;
+               #size-cells = <1>;
+               ranges;
+
+               /*
+                * This is a dummy clock, to be used as placeholder on
+                * other mux clocks when a specific parent clock is not
+                * yet implemented. It should be dropped when the driver
+                * is complete.
+                */
+               dummy: dummy {
+                       #clock-cells = <0>;
+                       compatible = "fixed-clock";
+                       clock-frequency = <0>;
+               };
+
+               osc24M: clk@01c20050 {
+                       #clock-cells = <0>;
+                       compatible = "allwinner,sun4i-a10-osc-clk";
+                       reg = <0x01c20050 0x4>;
+                       clock-frequency = <24000000>;
+                       clock-output-names = "osc24M";
+               };
+
+               osc3M: osc3M-clk {
+                       compatible = "fixed-factor-clock";
+                       #clock-cells = <0>;
+                       clock-div = <8>;
+                       clock-mult = <1>;
+                       clocks = <&osc24M>;
+                       clock-output-names = "osc3M";
+               };
+
+               osc32k: clk@0 {
+                       #clock-cells = <0>;
+                       compatible = "fixed-clock";
+                       clock-frequency = <32768>;
+                       clock-output-names = "osc32k";
+               };
+
+               pll1: clk@01c20000 {
+                       #clock-cells = <0>;
+                       compatible = "allwinner,sun4i-a10-pll1-clk";
+                       reg = <0x01c20000 0x4>;
+                       clocks = <&osc24M>;
+                       clock-output-names = "pll1";
+               };
+
+               pll2: clk@01c20008 {
+                       #clock-cells = <1>;
+                       compatible = "allwinner,sun5i-a13-pll2-clk";
+                       reg = <0x01c20008 0x8>;
+                       clocks = <&osc24M>;
+                       clock-output-names = "pll2-1x", "pll2-2x",
+                                            "pll2-4x", "pll2-8x";
+               };
+
+               pll3: clk@01c20010 {
+                       #clock-cells = <0>;
+                       compatible = "allwinner,sun4i-a10-pll3-clk";
+                       reg = <0x01c20010 0x4>;
+                       clocks = <&osc3M>;
+                       clock-output-names = "pll3";
+               };
+
+               pll3x2: pll3x2-clk {
+                       compatible = "allwinner,sun4i-a10-pll3-2x-clk";
+                       #clock-cells = <0>;
+                       clock-div = <1>;
+                       clock-mult = <2>;
+                       clocks = <&pll3>;
+                       clock-output-names = "pll3-2x";
+               };
+
+               pll4: clk@01c20018 {
+                       #clock-cells = <0>;
+                       compatible = "allwinner,sun4i-a10-pll1-clk";
+                       reg = <0x01c20018 0x4>;
+                       clocks = <&osc24M>;
+                       clock-output-names = "pll4";
+               };
+
+               pll5: clk@01c20020 {
+                       #clock-cells = <1>;
+                       compatible = "allwinner,sun4i-a10-pll5-clk";
+                       reg = <0x01c20020 0x4>;
+                       clocks = <&osc24M>;
+                       clock-output-names = "pll5_ddr", "pll5_other";
+               };
+
+               pll6: clk@01c20028 {
+                       #clock-cells = <1>;
+                       compatible = "allwinner,sun4i-a10-pll6-clk";
+                       reg = <0x01c20028 0x4>;
+                       clocks = <&osc24M>;
+                       clock-output-names = "pll6_sata", "pll6_other", "pll6";
+               };
+
+               pll7: clk@01c20030 {
+                       #clock-cells = <0>;
+                       compatible = "allwinner,sun4i-a10-pll3-clk";
+                       reg = <0x01c20030 0x4>;
+                       clocks = <&osc3M>;
+                       clock-output-names = "pll7";
+               };
+
+               pll7x2: pll7x2-clk {
+                       compatible = "allwinner,sun4i-a10-pll3-2x-clk";
+                       #clock-cells = <0>;
+                       clock-div = <1>;
+                       clock-mult = <2>;
+                       clocks = <&pll7>;
+                       clock-output-names = "pll7-2x";
+               };
+
+               /* dummy is 200M */
+               cpu: cpu@01c20054 {
+                       #clock-cells = <0>;
+                       compatible = "allwinner,sun4i-a10-cpu-clk";
+                       reg = <0x01c20054 0x4>;
+                       clocks = <&osc32k>, <&osc24M>, <&pll1>, <&dummy>;
+                       clock-output-names = "cpu";
+               };
+
+               axi: axi@01c20054 {
+                       #clock-cells = <0>;
+                       compatible = "allwinner,sun4i-a10-axi-clk";
+                       reg = <0x01c20054 0x4>;
+                       clocks = <&cpu>;
+                       clock-output-names = "axi";
+               };
+
+               ahb: ahb@01c20054 {
+                       #clock-cells = <0>;
+                       compatible = "allwinner,sun5i-a13-ahb-clk";
+                       reg = <0x01c20054 0x4>;
+                       clocks = <&axi>, <&cpu>, <&pll6 1>;
+                       clock-output-names = "ahb";
+                       /*
+                        * Use PLL6 as parent, instead of CPU/AXI
+                        * which has rate changes due to cpufreq
+                        */
+                       assigned-clocks = <&ahb>;
+                       assigned-clock-parents = <&pll6 1>;
+               };
+
+               apb0: apb0@01c20054 {
+                       #clock-cells = <0>;
+                       compatible = "allwinner,sun4i-a10-apb0-clk";
+                       reg = <0x01c20054 0x4>;
+                       clocks = <&ahb>;
+                       clock-output-names = "apb0";
+               };
+
+               apb1: clk@01c20058 {
+                       #clock-cells = <0>;
+                       compatible = "allwinner,sun4i-a10-apb1-clk";
+                       reg = <0x01c20058 0x4>;
+                       clocks = <&osc24M>, <&pll6 1>, <&osc32k>;
+                       clock-output-names = "apb1";
+               };
+
+               axi_gates: clk@01c2005c {
+                       #clock-cells = <1>;
+                       compatible = "allwinner,sun4i-a10-gates-clk";
+                       reg = <0x01c2005c 0x4>;
+                       clocks = <&axi>;
+                       clock-indices = <0>;
+                       clock-output-names = "axi_dram";
+               };
+
+               ahb_gates: clk@01c20060 {
+                       #clock-cells = <1>;
+                       compatible = "allwinner,sun5i-a13-ahb-gates-clk";
+                       reg = <0x01c20060 0x8>;
+                       clocks = <&ahb>;
+                       clock-indices = <0>, <1>,
+                                       <2>, <5>, <6>,
+                                       <7>, <8>, <9>,
+                                       <10>, <13>,
+                                       <14>, <17>, <20>,
+                                       <21>, <22>,
+                                       <28>, <32>, <34>,
+                                       <36>, <40>, <44>,
+                                       <46>, <51>,
+                                       <52>;
+                       clock-output-names = "ahb_usbotg", "ahb_ehci",
+                                            "ahb_ohci", "ahb_ss", "ahb_dma",
+                                            "ahb_bist", "ahb_mmc0", "ahb_mmc1",
+                                            "ahb_mmc2", "ahb_nand",
+                                            "ahb_sdram", "ahb_emac", "ahb_spi0",
+                                            "ahb_spi1", "ahb_spi2",
+                                            "ahb_hstimer", "ahb_ve", "ahb_tve",
+                                            "ahb_lcd", "ahb_csi", "ahb_de_be",
+                                            "ahb_de_fe", "ahb_iep",
+                                            "ahb_mali400";
+               };
+
+               apb0_gates: clk@01c20068 {
+                       #clock-cells = <1>;
+                       compatible = "allwinner,sun4i-a10-gates-clk";
+                       reg = <0x01c20068 0x4>;
+                       clocks = <&apb0>;
+                       clock-indices = <0>, <3>,
+                                       <5>, <6>;
+                       clock-output-names = "apb0_codec", "apb0_i2s0",
+                                            "apb0_pio", "apb0_ir";
+               };
+
+               apb1_gates: clk@01c2006c {
+                       #clock-cells = <1>;
+                       compatible = "allwinner,sun4i-a10-gates-clk";
+                       reg = <0x01c2006c 0x4>;
+                       clocks = <&apb1>;
+                       clock-indices = <0>, <1>,
+                                       <2>, <17>,
+                                       <18>, <19>;
+                       clock-output-names = "apb1_i2c0", "apb1_i2c1",
+                                            "apb1_i2c2", "apb1_uart1",
+                                            "apb1_uart2", "apb1_uart3";
+               };
+
+               nand_clk: clk@01c20080 {
+                       #clock-cells = <0>;
+                       compatible = "allwinner,sun4i-a10-mod0-clk";
+                       reg = <0x01c20080 0x4>;
+                       clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+                       clock-output-names = "nand";
+               };
+
+               ms_clk: clk@01c20084 {
+                       #clock-cells = <0>;
+                       compatible = "allwinner,sun4i-a10-mod0-clk";
+                       reg = <0x01c20084 0x4>;
+                       clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+                       clock-output-names = "ms";
+               };
+
+               mmc0_clk: clk@01c20088 {
+                       #clock-cells = <1>;
+                       compatible = "allwinner,sun4i-a10-mmc-clk";
+                       reg = <0x01c20088 0x4>;
+                       clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+                       clock-output-names = "mmc0",
+                                            "mmc0_output",
+                                            "mmc0_sample";
+               };
+
+               mmc1_clk: clk@01c2008c {
+                       #clock-cells = <1>;
+                       compatible = "allwinner,sun4i-a10-mmc-clk";
+                       reg = <0x01c2008c 0x4>;
+                       clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+                       clock-output-names = "mmc1",
+                                            "mmc1_output",
+                                            "mmc1_sample";
+               };
+
+               mmc2_clk: clk@01c20090 {
+                       #clock-cells = <1>;
+                       compatible = "allwinner,sun4i-a10-mmc-clk";
+                       reg = <0x01c20090 0x4>;
+                       clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+                       clock-output-names = "mmc2",
+                                            "mmc2_output",
+                                            "mmc2_sample";
+               };
+
+               ts_clk: clk@01c20098 {
+                       #clock-cells = <0>;
+                       compatible = "allwinner,sun4i-a10-mod0-clk";
+                       reg = <0x01c20098 0x4>;
+                       clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+                       clock-output-names = "ts";
+               };
+
+               ss_clk: clk@01c2009c {
+                       #clock-cells = <0>;
+                       compatible = "allwinner,sun4i-a10-mod0-clk";
+                       reg = <0x01c2009c 0x4>;
+                       clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+                       clock-output-names = "ss";
+               };
+
+               spi0_clk: clk@01c200a0 {
+                       #clock-cells = <0>;
+                       compatible = "allwinner,sun4i-a10-mod0-clk";
+                       reg = <0x01c200a0 0x4>;
+                       clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+                       clock-output-names = "spi0";
+               };
+
+               spi1_clk: clk@01c200a4 {
+                       #clock-cells = <0>;
+                       compatible = "allwinner,sun4i-a10-mod0-clk";
+                       reg = <0x01c200a4 0x4>;
+                       clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+                       clock-output-names = "spi1";
+               };
+
+               spi2_clk: clk@01c200a8 {
+                       #clock-cells = <0>;
+                       compatible = "allwinner,sun4i-a10-mod0-clk";
+                       reg = <0x01c200a8 0x4>;
+                       clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+                       clock-output-names = "spi2";
+               };
+
+               ir0_clk: clk@01c200b0 {
+                       #clock-cells = <0>;
+                       compatible = "allwinner,sun4i-a10-mod0-clk";
+                       reg = <0x01c200b0 0x4>;
+                       clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+                       clock-output-names = "ir0";
+               };
+
+               i2s0_clk: clk@01c200b8 {
+                       #clock-cells = <0>;
+                       compatible = "allwinner,sun4i-a10-mod1-clk";
+                       reg = <0x01c200b8 0x4>;
+                       clocks = <&pll2 SUN4I_A10_PLL2_8X>,
+                                <&pll2 SUN4I_A10_PLL2_4X>,
+                                <&pll2 SUN4I_A10_PLL2_2X>,
+                                <&pll2 SUN4I_A10_PLL2_1X>;
+                       clock-output-names = "i2s0";
+               };
+
+               spdif_clk: clk@01c200c0 {
+                       #clock-cells = <0>;
+                       compatible = "allwinner,sun4i-a10-mod1-clk";
+                       reg = <0x01c200c0 0x4>;
+                       clocks = <&pll2 SUN4I_A10_PLL2_8X>,
+                                <&pll2 SUN4I_A10_PLL2_4X>,
+                                <&pll2 SUN4I_A10_PLL2_2X>,
+                                <&pll2 SUN4I_A10_PLL2_1X>;
+                       clock-output-names = "spdif";
+               };
+
+               usb_clk: clk@01c200cc {
+                       #clock-cells = <1>;
+                       #reset-cells = <1>;
+                       compatible = "allwinner,sun5i-a13-usb-clk";
+                       reg = <0x01c200cc 0x4>;
+                       clocks = <&pll6 1>;
+                       clock-output-names = "usb_ohci0", "usb_phy";
+               };
+
+               dram_gates: clk@01c20100 {
+                       #clock-cells = <1>;
+                       compatible = "nextthing,gr8-dram-gates-clk",
+                                    "allwinner,sun4i-a10-gates-clk";
+                       reg = <0x01c20100 0x4>;
+                       clocks = <&pll5 0>;
+                       clock-indices = <0>,
+                                       <1>,
+                                       <25>,
+                                       <26>,
+                                       <29>,
+                                       <31>;
+                       clock-output-names = "dram_ve",
+                                            "dram_csi",
+                                            "dram_de_fe",
+                                            "dram_de_be",
+                                            "dram_ace",
+                                            "dram_iep";
+               };
+
+               de_be_clk: clk@01c20104 {
+                       #clock-cells = <0>;
+                       #reset-cells = <0>;
+                       compatible = "allwinner,sun4i-a10-display-clk";
+                       reg = <0x01c20104 0x4>;
+                       clocks = <&pll3>, <&pll7>, <&pll5 1>;
+                       clock-output-names = "de-be";
+               };
+
+               de_fe_clk: clk@01c2010c {
+                       #clock-cells = <0>;
+                       #reset-cells = <0>;
+                       compatible = "allwinner,sun4i-a10-display-clk";
+                       reg = <0x01c2010c 0x4>;
+                       clocks = <&pll3>, <&pll7>, <&pll5 1>;
+                       clock-output-names = "de-fe";
+               };
+
+               tcon_ch0_clk: clk@01c20118 {
+                       #clock-cells = <0>;
+                       #reset-cells = <1>;
+                       compatible = "allwinner,sun4i-a10-tcon-ch0-clk";
+                       reg = <0x01c20118 0x4>;
+                       clocks = <&pll3>, <&pll7>, <&pll3x2>, <&pll7x2>;
+                       clock-output-names = "tcon-ch0-sclk";
+               };
+
+               tcon_ch1_clk: clk@01c2012c {
+                       #clock-cells = <0>;
+                       compatible = "allwinner,sun4i-a10-tcon-ch1-clk";
+                       reg = <0x01c2012c 0x4>;
+                       clocks = <&pll3>, <&pll7>, <&pll3x2>, <&pll7x2>;
+                       clock-output-names = "tcon-ch1-sclk";
+               };
+
+               codec_clk: clk@01c20140 {
+                       #clock-cells = <0>;
+                       compatible = "allwinner,sun4i-a10-codec-clk";
+                       reg = <0x01c20140 0x4>;
+                       clocks = <&pll2 SUN4I_A10_PLL2_1X>;
+                       clock-output-names = "codec";
+               };
+
+               mbus_clk: clk@01c2015c {
+                       #clock-cells = <0>;
+                       compatible = "allwinner,sun5i-a13-mbus-clk";
+                       reg = <0x01c2015c 0x4>;
+                       clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+                       clock-output-names = "mbus";
+               };
+       };
+
+       display-engine {
+               compatible = "allwinner,sun5i-a13-display-engine";
+               allwinner,pipelines = <&fe0>;
+       };
+
+       soc@01c00000 {
+               compatible = "simple-bus";
+               #address-cells = <1>;
+               #size-cells = <1>;
+               ranges;
+
+               sram-controller@01c00000 {
+                       compatible = "allwinner,sun4i-a10-sram-controller";
+                       reg = <0x01c00000 0x30>;
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+                       ranges;
+
+                       sram_a: sram@00000000 {
+                               compatible = "mmio-sram";
+                               reg = <0x00000000 0xc000>;
+                               #address-cells = <1>;
+                               #size-cells = <1>;
+                               ranges = <0 0x00000000 0xc000>;
+                       };
+
+                       sram_d: sram@00010000 {
+                               compatible = "mmio-sram";
+                               reg = <0x00010000 0x1000>;
+                               #address-cells = <1>;
+                               #size-cells = <1>;
+                               ranges = <0 0x00010000 0x1000>;
+
+                               otg_sram: sram-section@0000 {
+                                       compatible = "allwinner,sun4i-a10-sram-d";
+                                       reg = <0x0000 0x1000>;
+                                       status = "disabled";
+                               };
+                       };
+               };
+
+               dma: dma-controller@01c02000 {
+                       compatible = "allwinner,sun4i-a10-dma";
+                       reg = <0x01c02000 0x1000>;
+                       interrupts = <27>;
+                       clocks = <&ahb_gates 6>;
+                       #dma-cells = <2>;
+               };
+
+               nfc: nand@01c03000 {
+                       compatible = "allwinner,sun4i-a10-nand";
+                       reg = <0x01c03000 0x1000>;
+                       interrupts = <37>;
+                       clocks = <&ahb_gates 13>, <&nand_clk>;
+                       clock-names = "ahb", "mod";
+                       dmas = <&dma SUN4I_DMA_DEDICATED 3>;
+                       dma-names = "rxtx";
+                       status = "disabled";
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+               };
+
+               spi0: spi@01c05000 {
+                       compatible = "allwinner,sun4i-a10-spi";
+                       reg = <0x01c05000 0x1000>;
+                       interrupts = <10>;
+                       clocks = <&ahb_gates 20>, <&spi0_clk>;
+                       clock-names = "ahb", "mod";
+                       dmas = <&dma SUN4I_DMA_DEDICATED 27>,
+                              <&dma SUN4I_DMA_DEDICATED 26>;
+                       dma-names = "rx", "tx";
+                       status = "disabled";
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+               };
+
+               spi1: spi@01c06000 {
+                       compatible = "allwinner,sun4i-a10-spi";
+                       reg = <0x01c06000 0x1000>;
+                       interrupts = <11>;
+                       clocks = <&ahb_gates 21>, <&spi1_clk>;
+                       clock-names = "ahb", "mod";
+                       dmas = <&dma SUN4I_DMA_DEDICATED 9>,
+                              <&dma SUN4I_DMA_DEDICATED 8>;
+                       dma-names = "rx", "tx";
+                       status = "disabled";
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+               };
+
+               tve0: tv-encoder@01c0a000 {
+                       compatible = "allwinner,sun4i-a10-tv-encoder";
+                       reg = <0x01c0a000 0x1000>;
+                       clocks = <&ahb_gates 34>;
+                       resets = <&tcon_ch0_clk 0>;
+                       status = "disabled";
+
+                       port {
+                               #address-cells = <1>;
+                               #size-cells = <0>;
+
+                               tve0_in_tcon0: endpoint@0 {
+                                       reg = <0>;
+                                       remote-endpoint = <&tcon0_out_tve0>;
+                               };
+                       };
+               };
+
+               tcon0: lcd-controller@01c0c000 {
+                       compatible = "allwinner,sun5i-a13-tcon";
+                       reg = <0x01c0c000 0x1000>;
+                       interrupts = <44>;
+                       resets = <&tcon_ch0_clk 1>;
+                       reset-names = "lcd";
+                       clocks = <&ahb_gates 36>,
+                                <&tcon_ch0_clk>,
+                                <&tcon_ch1_clk>;
+                       clock-names = "ahb",
+                                     "tcon-ch0",
+                                     "tcon-ch1";
+                       clock-output-names = "tcon-pixel-clock";
+                       status = "disabled";
+
+                       ports {
+                               #address-cells = <1>;
+                               #size-cells = <0>;
+
+                               tcon0_in: port@0 {
+                                       #address-cells = <1>;
+                                       #size-cells = <0>;
+                                       reg = <0>;
+
+                                       tcon0_in_be0: endpoint@0 {
+                                               reg = <0>;
+                                               remote-endpoint = <&be0_out_tcon0>;
+                                       };
+                               };
+
+                               tcon0_out: port@1 {
+                                       #address-cells = <1>;
+                                       #size-cells = <0>;
+                                       reg = <1>;
+
+                                       tcon0_out_tve0: endpoint@1 {
+                                               reg = <1>;
+                                               remote-endpoint = <&tve0_in_tcon0>;
+                                       };
+                               };
+                       };
+               };
+
+               mmc0: mmc@01c0f000 {
+                       compatible = "allwinner,sun5i-a13-mmc";
+                       reg = <0x01c0f000 0x1000>;
+                       clocks = <&ahb_gates 8>,
+                                <&mmc0_clk 0>,
+                                <&mmc0_clk 1>,
+                                <&mmc0_clk 2>;
+                       clock-names = "ahb",
+                                     "mmc",
+                                     "output",
+                                     "sample";
+                       interrupts = <32>;
+                       status = "disabled";
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+               };
+
+               mmc1: mmc@01c10000 {
+                       compatible = "allwinner,sun5i-a13-mmc";
+                       reg = <0x01c10000 0x1000>;
+                       clocks = <&ahb_gates 9>,
+                                <&mmc1_clk 0>,
+                                <&mmc1_clk 1>,
+                                <&mmc1_clk 2>;
+                       clock-names = "ahb",
+                                     "mmc",
+                                     "output",
+                                     "sample";
+                       interrupts = <33>;
+                       status = "disabled";
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+               };
+
+               mmc2: mmc@01c11000 {
+                       compatible = "allwinner,sun5i-a13-mmc";
+                       reg = <0x01c11000 0x1000>;
+                       clocks = <&ahb_gates 10>,
+                                <&mmc2_clk 0>,
+                                <&mmc2_clk 1>,
+                                <&mmc2_clk 2>;
+                       clock-names = "ahb",
+                                     "mmc",
+                                     "output",
+                                     "sample";
+                       interrupts = <34>;
+                       status = "disabled";
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+               };
+
+               usb_otg: usb@01c13000 {
+                       compatible = "allwinner,sun4i-a10-musb";
+                       reg = <0x01c13000 0x0400>;
+                       clocks = <&ahb_gates 0>;
+                       interrupts = <38>;
+                       interrupt-names = "mc";
+                       phys = <&usbphy 0>;
+                       phy-names = "usb";
+                       extcon = <&usbphy 0>;
+                       allwinner,sram = <&otg_sram 1>;
+                       status = "disabled";
+
+                       dr_mode = "otg";
+               };
+
+               usbphy: phy@01c13400 {
+                       #phy-cells = <1>;
+                       compatible = "allwinner,sun5i-a13-usb-phy";
+                       reg = <0x01c13400 0x10 0x01c14800 0x4>;
+                       reg-names = "phy_ctrl", "pmu1";
+                       clocks = <&usb_clk 8>;
+                       clock-names = "usb_phy";
+                       resets = <&usb_clk 0>, <&usb_clk 1>;
+                       reset-names = "usb0_reset", "usb1_reset";
+                       status = "disabled";
+               };
+
+               ehci0: usb@01c14000 {
+                       compatible = "allwinner,sun5i-a13-ehci", "generic-ehci";
+                       reg = <0x01c14000 0x100>;
+                       interrupts = <39>;
+                       clocks = <&ahb_gates 1>;
+                       phys = <&usbphy 1>;
+                       phy-names = "usb";
+                       status = "disabled";
+               };
+
+               ohci0: usb@01c14400 {
+                       compatible = "allwinner,sun5i-a13-ohci", "generic-ohci";
+                       reg = <0x01c14400 0x100>;
+                       interrupts = <40>;
+                       clocks = <&usb_clk 6>, <&ahb_gates 2>;
+                       phys = <&usbphy 1>;
+                       phy-names = "usb";
+                       status = "disabled";
+               };
+
+               spi2: spi@01c17000 {
+                       compatible = "allwinner,sun4i-a10-spi";
+                       reg = <0x01c17000 0x1000>;
+                       interrupts = <12>;
+                       clocks = <&ahb_gates 22>, <&spi2_clk>;
+                       clock-names = "ahb", "mod";
+                       dmas = <&dma SUN4I_DMA_DEDICATED 29>,
+                              <&dma SUN4I_DMA_DEDICATED 28>;
+                       dma-names = "rx", "tx";
+                       status = "disabled";
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+               };
+
+               intc: interrupt-controller@01c20400 {
+                       compatible = "allwinner,sun4i-a10-ic";
+                       reg = <0x01c20400 0x400>;
+                       interrupt-controller;
+                       #interrupt-cells = <1>;
+               };
+
+               pio: pinctrl@01c20800 {
+                       compatible = "nextthing,gr8-pinctrl";
+                       reg = <0x01c20800 0x400>;
+                       interrupts = <28>;
+                       clocks = <&apb0_gates 5>;
+                       gpio-controller;
+                       interrupt-controller;
+                       #interrupt-cells = <3>;
+                       #gpio-cells = <3>;
+
+                       i2c0_pins_a: i2c0@0 {
+                               allwinner,pins = "PB0", "PB1";
+                               allwinner,function = "i2c0";
+                               allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+                               allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+                       };
+
+                       i2c1_pins_a: i2c1@0 {
+                               allwinner,pins = "PB15", "PB16";
+                               allwinner,function = "i2c1";
+                               allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+                               allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+                       };
+
+                       i2c2_pins_a: i2c2@0 {
+                               allwinner,pins = "PB17", "PB18";
+                               allwinner,function = "i2c2";
+                               allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+                               allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+                       };
+
+                       i2s0_data_pins_a: i2s0-data@0 {
+                               allwinner,pins = "PB6", "PB7", "PB8", "PB9";
+                               allwinner,function = "i2s0";
+                               allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+                               allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+                       };
+
+                       i2s0_mclk_pins_a: i2s0-mclk@0 {
+                               allwinner,pins = "PB5";
+                               allwinner,function = "i2s0";
+                               allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+                               allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+                       };
+
+                       ir0_rx_pins_a: ir0@0 {
+                               allwinner,pins = "PB4";
+                               allwinner,function = "ir0";
+                               allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+                               allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+                       };
+
+                       lcd_rgb666_pins: lcd-rgb666@0 {
+                               allwinner,pins = "PD2", "PD3", "PD4", "PD5", "PD6", "PD7",
+                                                "PD10", "PD11", "PD12", "PD13", "PD14", "PD15",
+                                                "PD18", "PD19", "PD20", "PD21", "PD22", "PD23",
+                                                "PD24", "PD25", "PD26", "PD27";
+                               allwinner,function = "lcd0";
+                               allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+                               allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+                       };
+
+                       mmc0_pins_a: mmc0@0 {
+                               allwinner,pins = "PF0", "PF1", "PF2", "PF3",
+                                                "PF4", "PF5";
+                               allwinner,function = "mmc0";
+                               allwinner,drive = <SUN4I_PINCTRL_30_MA>;
+                               allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+                       };
+
+                       nand_pins_a: nand-base0@0 {
+                               allwinner,pins = "PC0", "PC1", "PC2",
+                                               "PC5", "PC8", "PC9", "PC10",
+                                               "PC11", "PC12", "PC13", "PC14",
+                                               "PC15";
+                               allwinner,function = "nand0";
+                               allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+                               allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+                       };
+
+                       nand_cs0_pins_a: nand-cs@0 {
+                               allwinner,pins = "PC4";
+                               allwinner,function = "nand0";
+                               allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+                               allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+                       };
+
+                       nand_rb0_pins_a: nand-rb@0 {
+                               allwinner,pins = "PC6";
+                               allwinner,function = "nand0";
+                               allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+                               allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+                       };
+
+                       pwm0_pins_a: pwm0@0 {
+                               allwinner,pins = "PB2";
+                               allwinner,function = "pwm0";
+                               allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+                               allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+                       };
+
+                       pwm1_pins: pwm1 {
+                               allwinner,pins = "PG13";
+                               allwinner,function = "pwm1";
+                               allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+                               allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+                       };
+
+                       spdif_tx_pins_a: spdif@0 {
+                               allwinner,pins = "PB10";
+                               allwinner,function = "spdif";
+                               allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+                               allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+                       };
+
+                       uart1_pins_a: uart1@1 {
+                               allwinner,pins = "PG3", "PG4";
+                               allwinner,function = "uart1";
+                               allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+                               allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+                       };
+
+                       uart1_cts_rts_pins_a: uart1-cts-rts@0 {
+                               allwinner,pins = "PG5", "PG6";
+                               allwinner,function = "uart1";
+                               allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+                               allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+                       };
+
+                       uart2_pins_a: uart2@1 {
+                               allwinner,pins = "PD2", "PD3";
+                               allwinner,function = "uart2";
+                               allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+                               allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+                       };
+
+                       uart2_cts_rts_pins_a: uart2-cts-rts@0 {
+                               allwinner,pins = "PD4", "PD5";
+                               allwinner,function = "uart2";
+                               allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+                               allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+                       };
+
+                       uart3_pins_a: uart3@1 {
+                               allwinner,pins = "PG9", "PG10";
+                               allwinner,function = "uart3";
+                               allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+                               allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+                       };
+
+                       uart3_cts_rts_pins_a: uart3-cts-rts@0 {
+                               allwinner,pins = "PG11", "PG12";
+                               allwinner,function = "uart3";
+                               allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+                               allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+                       };
+               };
+
+               pwm: pwm@01c20e00 {
+                       compatible = "allwinner,sun5i-a10s-pwm";
+                       reg = <0x01c20e00 0xc>;
+                       clocks = <&osc24M>;
+                       #pwm-cells = <3>;
+                       status = "disabled";
+               };
+
+               timer@01c20c00 {
+                       compatible = "allwinner,sun4i-a10-timer";
+                       reg = <0x01c20c00 0x90>;
+                       interrupts = <22>;
+                       clocks = <&osc24M>;
+               };
+
+               wdt: watchdog@01c20c90 {
+                       compatible = "allwinner,sun4i-a10-wdt";
+                       reg = <0x01c20c90 0x10>;
+               };
+
+               spdif: spdif@01c21000 {
+                       #sound-dai-cells = <0>;
+                       compatible = "allwinner,sun4i-a10-spdif";
+                       reg = <0x01c21000 0x400>;
+                       interrupts = <13>;
+                       clocks = <&apb0_gates 1>, <&spdif_clk>;
+                       clock-names = "apb", "spdif";
+                       dmas = <&dma SUN4I_DMA_NORMAL 2>,
+                              <&dma SUN4I_DMA_NORMAL 2>;
+                       dma-names = "rx", "tx";
+                       status = "disabled";
+               };
+
+               ir0: ir@01c21800 {
+                       compatible = "allwinner,sun4i-a10-ir";
+                       clocks = <&apb0_gates 6>, <&ir0_clk>;
+                       clock-names = "apb", "ir";
+                       interrupts = <5>;
+                       reg = <0x01c21800 0x40>;
+                       status = "disabled";
+               };
+
+               i2s0: i2s@01c22400 {
+                       #sound-dai-cells = <0>;
+                       compatible = "allwinner,sun4i-a10-i2s";
+                       reg = <0x01c22400 0x400>;
+                       interrupts = <16>;
+                       clocks = <&apb0_gates 3>, <&i2s0_clk>;
+                       clock-names = "apb", "mod";
+                       dmas = <&dma SUN4I_DMA_NORMAL 3>,
+                              <&dma SUN4I_DMA_NORMAL 3>;
+                       dma-names = "rx", "tx";
+                       status = "disabled";
+               };
+
+               lradc: lradc@01c22800 {
+                       compatible = "allwinner,sun4i-a10-lradc-keys";
+                       reg = <0x01c22800 0x100>;
+                       interrupts = <31>;
+                       status = "disabled";
+               };
+
+               codec: codec@01c22c00 {
+                       #sound-dai-cells = <0>;
+                       compatible = "allwinner,sun4i-a10-codec";
+                       reg = <0x01c22c00 0x40>;
+                       interrupts = <30>;
+                       clocks = <&apb0_gates 0>, <&codec_clk>;
+                       clock-names = "apb", "codec";
+                       dmas = <&dma SUN4I_DMA_NORMAL 19>,
+                              <&dma SUN4I_DMA_NORMAL 19>;
+                       dma-names = "rx", "tx";
+                       status = "disabled";
+               };
+
+               rtp: rtp@01c25000 {
+                       compatible = "allwinner,sun5i-a13-ts";
+                       reg = <0x01c25000 0x100>;
+                       interrupts = <29>;
+                       #thermal-sensor-cells = <0>;
+               };
+
+               uart1: serial@01c28400 {
+                       compatible = "snps,dw-apb-uart";
+                       reg = <0x01c28400 0x400>;
+                       interrupts = <2>;
+                       reg-shift = <2>;
+                       reg-io-width = <4>;
+                       clocks = <&apb1_gates 17>;
+                       status = "disabled";
+               };
+
+               uart2: serial@01c28800 {
+                       compatible = "snps,dw-apb-uart";
+                       reg = <0x01c28800 0x400>;
+                       interrupts = <3>;
+                       reg-shift = <2>;
+                       reg-io-width = <4>;
+                       clocks = <&apb1_gates 18>;
+                       status = "disabled";
+               };
+
+               uart3: serial@01c28c00 {
+                       compatible = "snps,dw-apb-uart";
+                       reg = <0x01c28c00 0x400>;
+                       interrupts = <4>;
+                       reg-shift = <2>;
+                       reg-io-width = <4>;
+                       clocks = <&apb1_gates 19>;
+                       status = "disabled";
+               };
+
+               i2c0: i2c@01c2ac00 {
+                       compatible = "allwinner,sun4i-a10-i2c";
+                       reg = <0x01c2ac00 0x400>;
+                       interrupts = <7>;
+                       clocks = <&apb1_gates 0>;
+                       status = "disabled";
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+               };
+
+               i2c1: i2c@01c2b000 {
+                       compatible = "allwinner,sun4i-a10-i2c";
+                       reg = <0x01c2b000 0x400>;
+                       interrupts = <8>;
+                       clocks = <&apb1_gates 1>;
+                       status = "disabled";
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+               };
+
+               i2c2: i2c@01c2b400 {
+                       compatible = "allwinner,sun4i-a10-i2c";
+                       reg = <0x01c2b400 0x400>;
+                       interrupts = <9>;
+                       clocks = <&apb1_gates 2>;
+                       status = "disabled";
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+               };
+
+               timer@01c60000 {
+                       compatible = "allwinner,sun5i-a13-hstimer";
+                       reg = <0x01c60000 0x1000>;
+                       interrupts = <82>, <83>;
+                       clocks = <&ahb_gates 28>;
+               };
+
+               fe0: display-frontend@01e00000 {
+                       compatible = "allwinner,sun5i-a13-display-frontend";
+                       reg = <0x01e00000 0x20000>;
+                       interrupts = <47>;
+                       clocks = <&ahb_gates 46>, <&de_fe_clk>,
+                                <&dram_gates 25>;
+                       clock-names = "ahb", "mod",
+                                     "ram";
+                       resets = <&de_fe_clk>;
+                       status = "disabled";
+
+                       ports {
+                               #address-cells = <1>;
+                               #size-cells = <0>;
+
+                               fe0_out: port@1 {
+                                       #address-cells = <1>;
+                                       #size-cells = <0>;
+                                       reg = <1>;
+
+                                       fe0_out_be0: endpoint@0 {
+                                               reg = <0>;
+                                               remote-endpoint = <&be0_in_fe0>;
+                                       };
+                               };
+                       };
+               };
+
+               be0: display-backend@01e60000 {
+                       compatible = "allwinner,sun5i-a13-display-backend";
+                       reg = <0x01e60000 0x10000>;
+                       clocks = <&ahb_gates 44>, <&de_be_clk>,
+                                <&dram_gates 26>;
+                       clock-names = "ahb", "mod",
+                                     "ram";
+                       resets = <&de_be_clk>;
+                       status = "disabled";
+
+                       assigned-clocks = <&de_be_clk>;
+                       assigned-clock-rates = <300000000>;
+
+                       ports {
+                               #address-cells = <1>;
+                               #size-cells = <0>;
+
+                               be0_in: port@0 {
+                                       #address-cells = <1>;
+                                       #size-cells = <0>;
+                                       reg = <0>;
+
+                                       be0_in_fe0: endpoint@0 {
+                                               reg = <0>;
+                                               remote-endpoint = <&fe0_out_be0>;
+                                       };
+                               };
+
+                               be0_out: port@1 {
+                                       #address-cells = <1>;
+                                       #size-cells = <0>;
+                                       reg = <1>;
+
+                                       be0_out_tcon0: endpoint@0 {
+                                               reg = <0>;
+                                               remote-endpoint = <&tcon0_in_be0>;
+                                       };
+                               };
+                       };
+               };
+       };
+};