sunxi: Enable second sdcard slot found on some boards
authorHans de Goede <hdegoede@redhat.com>
Fri, 3 Oct 2014 14:58:04 +0000 (16:58 +0200)
committerHans de Goede <hdegoede@redhat.com>
Fri, 24 Oct 2014 07:35:38 +0000 (09:35 +0200)
Enable the second sdcard slot found on some boards. Note that we do not
set CONFIG_MMC_SUNXI_SLOT_EXTRA for the SPL, as having it there is not useful,

Except for on the Mele-M3 where the second sdcard is an eMMC, from which the
device can also boot, and there we want to have both in the SPL, so that
a single u-boot binary can both from both. So for the M3 we do prefix the
defconfig setting with the special "+S:" syntax so that it applies to the
SPL too.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Ian Campbell <ijc@hellion.org.uk>
configs/A10s-OLinuXino-M_defconfig
configs/A20-OLinuXino_MICRO_defconfig
configs/Mele_M3_defconfig

index a578c067d4d0dd5dcb39854a1197abdeb24cb86c..2aad834fa840c5b1390c3621442e9ab444240349 100644 (file)
@@ -1,5 +1,8 @@
 CONFIG_SPL=y
 CONFIG_SYS_EXTRA_OPTIONS="A10S_OLINUXINO_M,AXP152_POWER,SUNXI_EMAC,USB_EHCI,SUNXI_USB_VBUS0_GPIO=SUNXI_GPB(10)"
 CONFIG_FDTFILE="sun5i-a10s-olinuxino-micro.dtb"
+CONFIG_MMC_SUNXI_SLOT_EXTRA=1
++S:CONFIG_MMC0_CD_PIN="PG1"
++S:CONFIG_MMC1_CD_PIN="PG13"
 +S:CONFIG_ARM=y
 +S:CONFIG_TARGET_SUN5I=y
index 20a947ca723adc5e110437dd47914399930ddc0c..0e0a7def2de600f0fc06aaf6898f3644fdd4243e 100644 (file)
@@ -1,5 +1,8 @@
 CONFIG_SPL=y
 CONFIG_SYS_EXTRA_OPTIONS="A20_OLINUXINO_M,AXP209_POWER,SUNXI_GMAC,AHCI,SATAPWR=SUNXI_GPB(8),USB_EHCI"
 CONFIG_FDTFILE="sun7i-a20-olinuxino-micro.dtb"
+CONFIG_MMC_SUNXI_SLOT_EXTRA=3
++S:CONFIG_MMC0_CD_PIN="PH1"
++S:CONFIG_MMC3_CD_PIN="PH11"
 +S:CONFIG_ARM=y
 +S:CONFIG_TARGET_SUN7I=y
index 645b236da6b34cfee153a8fff7c425c1e52cef61..a043ad277d79efd5546e223b57664dc8413958bb 100644 (file)
@@ -1,5 +1,7 @@
 CONFIG_SPL=y
 CONFIG_SYS_EXTRA_OPTIONS="MELE_M3,AXP209_POWER,SUNXI_GMAC,USB_EHCI"
 CONFIG_FDTFILE="sun7i-a20-m3.dtb"
++S:CONFIG_MMC_SUNXI_SLOT_EXTRA=2
++S:CONFIG_MMC0_CD_PIN="PH1"
 +S:CONFIG_ARM=y
 +S:CONFIG_TARGET_SUN7I=y