km83xx: add common support for km8309 boards

Add support for Keymile boards based on mpc8309
(it would be only kmvect1 for now)

Signed-off-by: Gerlando Falauto <gerlando.falauto@keymile.com>
[#elseif -> #if to allow kmcoge5ne and kmeter1 to build successfully]
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>

diff --git a/board/keymile/km83xx/km83xx.c b/board/keymile/km83xx/km83xx.c
index e01a633aaede308aa7411081f7101c5a93410511..83a8753e5a0f0b1924b5b903c6a3f41a4f5c51b3 100644 (file)
--- a/board/keymile/km83xx/km83xx.c
+++ b/board/keymile/km83xx/km83xx.c
@@ -56,7 +56,7 @@ const qe_iop_conf_t qe_iop_conf_tab[] = {
        {5,  2, 1, 0, 1}, /* UART2_RTS */
        {5,  3, 2, 0, 2}, /* UART2_SIN */
        {5,  1, 2, 0, 3}, /* UART2_CTS */
-#else
+#elif !defined(CONFIG_MPC8309)
        /* Local Bus */
        {0, 16, 1, 0, 3}, /* LA00 */
        {0, 17, 1, 0, 3}, /* LA01 */

diff --git a/include/configs/km/km8309-common.h b/include/configs/km/km8309-common.h
new file mode 100644 (file)
index 0000000..b36e892
--- /dev/null
+++ b/include/configs/km/km8309-common.h
@@ -0,0 +1,176 @@
+/*
+ * Copyright (C) 2012 Keymile AG
+ *                    Gerlando Falauto <gerlando.falauto@keymile.com>
+ *
+ * Based on km8321-common.h, see respective copyright notice for credits
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ */
+
+#ifndef __CONFIG_KM8309_COMMON_H
+#define __CONFIG_KM8309_COMMON_H
+
+/*
+ * High Level Configuration Options
+ */
+#define CONFIG_E300            1       /* E300 family */
+#define CONFIG_QE              1       /* Has QE */
+#define CONFIG_MPC83xx         1       /* MPC83xx family */
+#define CONFIG_MPC830x         1       /* MPC830x family */
+#define CONFIG_MPC8309         1       /* MPC8309 CPU specific */
+
+#define CONFIG_KM_DEF_ARCH     "arch=ppc_8xx\0"
+#define CONFIG_CMD_DIAG                1
+
+/* include common defines/options for all 83xx Keymile boards */
+#include "km83xx-common.h"
+
+/* QE microcode/firmware address */
+#define CONFIG_SYS_QE_FMAN_FW_IN_NOR
+/* at end of uboot partition, before env */
+#define CONFIG_SYS_QE_FMAN_FW_ADDR   0xF00B0000
+
+#define CONFIG_MISC_INIT_R
+
+/*
+ * System IO Config
+ */
+/* 0x14000180 SICR_1 */
+#define CONFIG_SYS_SICRL (0                    \
+               | SICR_1_UART1_UART1RTS         \
+               | SICR_1_I2C_CKSTOP             \
+               | SICR_1_IRQ_A_IRQ              \
+               | SICR_1_IRQ_B_IRQ              \
+               | SICR_1_GPIO_A_GPIO            \
+               | SICR_1_GPIO_B_GPIO            \
+               | SICR_1_GPIO_C_GPIO            \
+               | SICR_1_GPIO_D_GPIO            \
+               | SICR_1_GPIO_E_GPIO            \
+               | SICR_1_GPIO_F_GPIO            \
+               | SICR_1_USB_A_UART2S           \
+               | SICR_1_USB_B_UART2RTS         \
+               | SICR_1_FEC1_FEC1              \
+               | SICR_1_FEC2_FEC2              \
+               )
+
+/* 0x00080400 SICR_2 */
+#define CONFIG_SYS_SICRH (0                    \
+               | SICR_2_FEC3_FEC3              \
+               | SICR_2_HDLC1_A_HDLC1          \
+               | SICR_2_ELBC_A_LA              \
+               | SICR_2_ELBC_B_LCLK            \
+               | SICR_2_HDLC2_A_HDLC2          \
+               | SICR_2_USB_D_GPIO             \
+               | SICR_2_PCI_PCI                \
+               | SICR_2_HDLC1_B_HDLC1          \
+               | SICR_2_HDLC1_C_HDLC1          \
+               | SICR_2_HDLC2_B_GPIO           \
+               | SICR_2_HDLC2_C_HDLC2          \
+               | SICR_2_QUIESCE_B              \
+               )
+
+/* GPR_1 */
+#define CONFIG_SYS_GPR1  0x50008060
+
+#define CONFIG_SYS_GP1DIR 0x00000000
+#define CONFIG_SYS_GP1ODR 0x00000000
+#define CONFIG_SYS_GP2DIR 0xFF000000
+#define CONFIG_SYS_GP2ODR 0x00000000
+
+/*
+ * Hardware Reset Configuration Word
+ */
+#define CONFIG_SYS_HRCW_LOW (\
+       HRCWL_LCL_BUS_TO_SCB_CLK_1X1 | \
+       HRCWL_DDR_TO_SCB_CLK_2X1 | \
+       HRCWL_CSB_TO_CLKIN_2X1 | \
+       HRCWL_CORE_TO_CSB_2X1 | \
+       HRCWL_CE_PLL_VCO_DIV_2 | \
+       HRCWL_CE_TO_PLL_1X3)
+
+#define CONFIG_SYS_HRCW_HIGH (\
+       HRCWH_PCI_AGENT | \
+       HRCWH_PCI_ARBITER_DISABLE | \
+       HRCWH_CORE_ENABLE | \
+       HRCWH_FROM_0X00000100 | \
+       HRCWH_BOOTSEQ_DISABLE | \
+       HRCWH_SW_WATCHDOG_DISABLE | \
+       HRCWH_ROM_LOC_LOCAL_16BIT | \
+       HRCWH_BIG_ENDIAN | \
+       HRCWH_LALE_NORMAL)
+
+#define CONFIG_SYS_DDR_CS0_BNDS                0x0000007f
+#define CONFIG_SYS_DDR_SDRAM_CFG       (SDRAM_CFG_SDRAM_TYPE_DDR2 | \
+                                        SDRAM_CFG_32_BE | \
+                                        SDRAM_CFG_SREN | \
+                                        SDRAM_CFG_HSE)
+
+#define CONFIG_SYS_DDR_SDRAM_CFG2      0x00401000
+#define CONFIG_SYS_DDR_CLK_CNTL                (DDR_SDRAM_CLK_CNTL_CLK_ADJUST_05)
+#define CONFIG_SYS_DDR_INTERVAL        ((0x064 << SDRAM_INTERVAL_BSTOPRE_SHIFT) | \
+                                (0x200 << SDRAM_INTERVAL_REFINT_SHIFT))
+
+#define CONFIG_SYS_DDR_CS0_CONFIG      (CSCONFIG_EN | CSCONFIG_AP | \
+                                        CSCONFIG_ODT_RD_NEVER | \
+                                        CSCONFIG_ODT_WR_ONLY_CURRENT | \
+                                        CSCONFIG_ROW_BIT_13 | \
+                                        CSCONFIG_COL_BIT_10)
+
+#define CONFIG_SYS_DDR_MODE    0x47860242
+#define CONFIG_SYS_DDR_MODE2   0x8080c000
+
+#define CONFIG_SYS_DDR_TIMING_0        ((2 << TIMING_CFG0_MRS_CYC_SHIFT) | \
+                                (8 << TIMING_CFG0_ODT_PD_EXIT_SHIFT) | \
+                                (2 << TIMING_CFG0_PRE_PD_EXIT_SHIFT) | \
+                                (2 << TIMING_CFG0_ACT_PD_EXIT_SHIFT) | \
+                                (0 << TIMING_CFG0_WWT_SHIFT) | \
+                                (0 << TIMING_CFG0_RRT_SHIFT) | \
+                                (0 << TIMING_CFG0_WRT_SHIFT) | \
+                                (0 << TIMING_CFG0_RWT_SHIFT))
+
+#define CONFIG_SYS_DDR_TIMING_1        ((TIMING_CFG1_CASLAT_40) | \
+                                (2 << TIMING_CFG1_WRTORD_SHIFT) | \
+                                (2 << TIMING_CFG1_ACTTOACT_SHIFT) | \
+                                (3 << TIMING_CFG1_WRREC_SHIFT) | \
+                                (7 << TIMING_CFG1_REFREC_SHIFT) | \
+                                (3 << TIMING_CFG1_ACTTORW_SHIFT) | \
+                                (7 << TIMING_CFG1_ACTTOPRE_SHIFT) | \
+                                (3 << TIMING_CFG1_PRETOACT_SHIFT))
+
+#define CONFIG_SYS_DDR_TIMING_2        ((8 << TIMING_CFG2_FOUR_ACT_SHIFT) | \
+                                (3 << TIMING_CFG2_CKE_PLS_SHIFT) | \
+                                (2 << TIMING_CFG2_WR_DATA_DELAY_SHIFT) | \
+                                (2 << TIMING_CFG2_RD_TO_PRE_SHIFT) | \
+                                (3 << TIMING_CFG2_WR_LAT_DELAY_SHIFT) | \
+                                (0 << TIMING_CFG2_ADD_LAT_SHIFT) | \
+                                (5 << TIMING_CFG2_CPO_SHIFT))
+
+#define CONFIG_SYS_DDR_TIMING_3        0x00000000
+
+#define CONFIG_SYS_KMBEC_FPGA_BASE     0xE8000000
+#define CONFIG_SYS_KMBEC_FPGA_SIZE     128
+
+/* EEprom support */
+#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
+
+/*
+ * Local Bus Configuration & Clock Setup
+ */
+#define CONFIG_SYS_LCRR_DBYP   0x80000000
+#define CONFIG_SYS_LCRR_EADC   0x00010000
+#define CONFIG_SYS_LCRR_CLKDIV 0x00000002
+
+#define CONFIG_SYS_LBC_LBCR    0x00000000
+
+/*
+ * MMU Setup
+ */
+#define CONFIG_SYS_IBAT7L      (0)
+#define CONFIG_SYS_IBAT7U      (0)
+#define CONFIG_SYS_DBAT7L      CONFIG_SYS_IBAT7L
+#define CONFIG_SYS_DBAT7U      CONFIG_SYS_IBAT7U
+
+#endif /* __CONFIG_KM8309_COMMON_H */

diff --git a/include/configs/km/km83xx-common.h b/include/configs/km/km83xx-common.h
index 877d8418c0a36049c696e96c139c0d41bd346072..a9823d6ef9461952f17aac1a5700c6f144465fcd 100644 (file)
--- a/include/configs/km/km83xx-common.h
+++ b/include/configs/km/km83xx-common.h
@@ -169,9 +169,15 @@
 #define UEC_VERBOSE_DEBUG      1
 
 #ifdef CONFIG_UEC_ETH1
+#if defined(CONFIG_MPC8309)
+#define CONFIG_SYS_UEC1_UCC_NUM        2       /* UCC3 */
+#define CONFIG_SYS_UEC1_RX_CLK         QE_CLK_NONE /* not used in RMII Mode */
+#define CONFIG_SYS_UEC1_TX_CLK         QE_CLK12
+#else
 #define CONFIG_SYS_UEC1_UCC_NUM        3       /* UCC4 */
 #define CONFIG_SYS_UEC1_RX_CLK         QE_CLK_NONE /* not used in RMII Mode */
 #define CONFIG_SYS_UEC1_TX_CLK         QE_CLK17
+#endif
 #define CONFIG_SYS_UEC1_ETH_TYPE       FAST_ETH
 #define CONFIG_SYS_UEC1_PHY_ADDR       0
 #define CONFIG_SYS_UEC1_INTERFACE_TYPE PHY_INTERFACE_MODE_RMII