mtd: nand: Introduce CONFIG_SYS_NAND_BUSWIDTH_16BIT
authorFabio Estevam <fabio.estevam@freescale.com>
Thu, 11 Apr 2013 09:35:34 +0000 (09:35 +0000)
committerAlbert ARIBAUD <albert.u.boot@aribaud.net>
Fri, 12 Apr 2013 05:55:03 +0000 (07:55 +0200)
Introduce CONFIG_SYS_NAND_BUSWIDTH_16BIT option so that other NAND controller
drivers could use it when a 16-bit NAND is deployed.

drivers/mtd/nand/ndfc has CONFIG_SYS_NDFC_16BIT, so just rename it, so that
other NAND drivers could reuse the same symbol.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Scott Wood <scottwood@freescale.com>
Reviewed-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
README
drivers/mtd/nand/ndfc.c

diff --git a/README b/README
index 5c5cd18551ce34627f9ec652fd5cc9d490c9dbc0..e9c3145156f3895370ae30acdfa2974194381e3c 100644 (file)
--- a/README
+++ b/README
@@ -3755,9 +3755,12 @@ Low Level (hardware related) configuration options:
 - CONFIG_SYS_SRIOn_MEM_SIZE:
                Size of SRIO port 'n' memory region
 
-- CONFIG_SYS_NDFC_16
-               Defined to tell the NDFC that the NAND chip is using a
-               16 bit bus.
+- CONFIG_SYS_NAND_BUSWIDTH_16BIT
+               Defined to tell the NAND controller that the NAND chip is using
+               a 16 bit bus.
+               Not all NAND drivers use this symbol.
+               Example of driver that uses it:
+               - drivers/mtd/nand/ndfc.c
 
 - CONFIG_SYS_NDFC_EBC0_CFG
                Sets the EBC0_CFG register for the NDFC. If not defined
index 6ebbb5ebee9cfb7e2de3cea92c28ec4de7fbf096..213d2c945a9a878d8bcd15ec5f16c219d240ba3d 100644 (file)
@@ -156,7 +156,7 @@ static uint8_t ndfc_read_byte(struct mtd_info *mtd)
 
        struct nand_chip *chip = mtd->priv;
 
-#ifdef CONFIG_SYS_NDFC_16BIT
+#ifdef CONFIG_SYS_NAND_BUSWIDTH_16BIT
        return (uint8_t) readw(chip->IO_ADDR_R);
 #else
        return readb(chip->IO_ADDR_R);
@@ -218,7 +218,7 @@ int board_nand_init(struct nand_chip *nand)
        nand->ecc.bytes = 3;
        nand->select_chip = ndfc_select_chip;
 
-#ifdef CONFIG_SYS_NDFC_16BIT
+#ifdef CONFIG_SYS_NAND_BUSWIDTH_16BIT
        nand->options |= NAND_BUSWIDTH_16;
 #endif