choice
prompt "Target select"
- default TARGET_AXS101
+ default TARGET_AXS10X
config TARGET_TB100
bool "Support tb100"
config TARGET_NSIM
bool "Support standalone nSIM & Free nSIM"
-config TARGET_AXS101
- bool "Support axs101"
+config TARGET_AXS10X
+ bool "Support Synopsys Designware SDP board (AXS101 & AXS103)"
endchoice
source "board/abilis/tb100/Kconfig"
source "board/synopsys/Kconfig"
-source "board/synopsys/axs101/Kconfig"
+source "board/synopsys/axs10x/Kconfig"
endmenu
# SPDX-License-Identifier: GPL-2.0+
#
-dtb-$(CONFIG_TARGET_AXS101) += axs10x.dtb
+dtb-$(CONFIG_TARGET_AXS10X) += axs10x.dtb
dtb-$(CONFIG_TARGET_NSIM) += nsim.dtb
dtb-$(CONFIG_TARGET_TB100) += abilis_tb100.dtb
+++ /dev/null
-if TARGET_AXS101
-
-config SYS_BOARD
- default "axs101"
-
-config SYS_VENDOR
- default "synopsys"
-
-config SYS_CONFIG_NAME
- default "axs101"
-
-endif
+++ /dev/null
-AXS101 BOARD
-M: Alexey Brodkin <abrodkin@synopsys.com>
-S: Maintained
-F: board/synopsys/axs101/
-F: include/configs/axs101.h
-F: configs/axs101_defconfig
-F: configs/axs103_defconfig
+++ /dev/null
-#
-# Copyright (C) 2013-2014 Synopsys, Inc. All rights reserved.
-#
-# SPDX-License-Identifier: GPL-2.0+
-#
-
-obj-y += axs101.o
-obj-$(CONFIG_CMD_NAND) += nand.o
+++ /dev/null
-/*
- * Copyright (C) 2013-2014 Synopsys, Inc. All rights reserved.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-#include <dwmmc.h>
-#include <malloc.h>
-#include "axs10x.h"
-
-DECLARE_GLOBAL_DATA_PTR;
-
-int board_mmc_init(bd_t *bis)
-{
- struct dwmci_host *host = NULL;
-
- host = malloc(sizeof(struct dwmci_host));
- if (!host) {
- printf("dwmci_host malloc fail!\n");
- return 1;
- }
-
- memset(host, 0, sizeof(struct dwmci_host));
- host->name = "Synopsys Mobile storage";
- host->ioaddr = (void *)ARC_DWMMC_BASE;
- host->buswidth = 4;
- host->dev_index = 0;
- host->bus_hz = 50000000;
-
- add_dwmci(host, host->bus_hz / 2, 400000);
-
- return 0;
-}
-
-#define AXS_MB_CREG 0xE0011000
-
-int board_early_init_f(void)
-{
- if (readl((void __iomem *)AXS_MB_CREG + 0x234) & (1 << 28))
- gd->board_type = AXS_MB_V3;
- else
- gd->board_type = AXS_MB_V2;
-
- return 0;
-}
-
-#ifdef CONFIG_ISA_ARCV2
-#define RESET_VECTOR_ADDR 0x0
-
-void smp_set_core_boot_addr(unsigned long addr, int corenr)
-{
- /* All cores have reset vector pointing to 0 */
- writel(addr, (void __iomem *)RESET_VECTOR_ADDR);
-
- /* Make sure other cores see written value in memory */
- flush_dcache_all();
-}
-
-void smp_kick_all_cpus(void)
-{
-/* CPU start CREG */
-#define AXC003_CREG_CPU_START 0xF0001400
-
-/* Bits positions in CPU start CREG */
-#define BITS_START 0
-#define BITS_POLARITY 8
-#define BITS_CORE_SEL 9
-#define BITS_MULTICORE 12
-
-#define CMD (1 << BITS_MULTICORE) | (1 << BITS_CORE_SEL) | \
- (1 << BITS_POLARITY) | (1 << BITS_START)
-
- writel(CMD, (void __iomem *)AXC003_CREG_CPU_START);
-}
-#endif
+++ /dev/null
-/*
- * Copyright (C) 2015 Synopsys, Inc. All rights reserved.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#ifndef _BOARD_SYNOPSYS_AXS10X_H
-#define _BOARD_SYNOPSYS_AXS10X_H
-
-enum {
- AXS_MB_V2,
- AXS_MB_V3
-};
-
-#endif /* _BOARD_SYNOPSYS_AXS10X_H */
-
+++ /dev/null
-/*
- * Copyright (C) 2013-2014 Synopsys, Inc. All rights reserved.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <bouncebuf.h>
-#include <common.h>
-#include <malloc.h>
-#include <nand.h>
-#include <asm/io.h>
-#include "axs10x.h"
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#define BUS_WIDTH 8 /* AXI data bus width in bytes */
-
-/* DMA buffer descriptor bits & masks */
-#define BD_STAT_OWN (1 << 31)
-#define BD_STAT_BD_FIRST (1 << 3)
-#define BD_STAT_BD_LAST (1 << 2)
-#define BD_SIZES_BUFFER1_MASK 0xfff
-
-#define BD_STAT_BD_COMPLETE (BD_STAT_BD_FIRST | BD_STAT_BD_LAST)
-
-/* Controller command flags */
-#define B_WFR (1 << 19) /* 1b - Wait for ready */
-#define B_LC (1 << 18) /* 1b - Last cycle */
-#define B_IWC (1 << 13) /* 1b - Interrupt when complete */
-
-/* NAND cycle types */
-#define B_CT_ADDRESS (0x0 << 16) /* Address operation */
-#define B_CT_COMMAND (0x1 << 16) /* Command operation */
-#define B_CT_WRITE (0x2 << 16) /* Write operation */
-#define B_CT_READ (0x3 << 16) /* Write operation */
-
-enum nand_isr_t {
- NAND_ISR_DATAREQUIRED = 0,
- NAND_ISR_TXUNDERFLOW,
- NAND_ISR_TXOVERFLOW,
- NAND_ISR_DATAAVAILABLE,
- NAND_ISR_RXUNDERFLOW,
- NAND_ISR_RXOVERFLOW,
- NAND_ISR_TXDMACOMPLETE,
- NAND_ISR_RXDMACOMPLETE,
- NAND_ISR_DESCRIPTORUNAVAILABLE,
- NAND_ISR_CMDDONE,
- NAND_ISR_CMDAVAILABLE,
- NAND_ISR_CMDERROR,
- NAND_ISR_DATATRANSFEROVER,
- NAND_ISR_NONE
-};
-
-enum nand_regs_t {
- AC_FIFO = 0, /* address and command fifo */
- IDMAC_BDADDR = 0x18, /* idmac descriptor list base address */
- INT_STATUS = 0x118, /* interrupt status register */
- INT_CLR_STATUS = 0x120, /* interrupt clear status register */
-};
-
-struct nand_bd {
- uint32_t status; /* DES0 */
- uint32_t sizes; /* DES1 */
- uint32_t buffer_ptr0; /* DES2 */
- uint32_t buffer_ptr1; /* DES3 */
-};
-
-#define NAND_REG_WRITE(r, v) \
- writel(v, (volatile void __iomem *)(CONFIG_SYS_NAND_BASE + r))
-#define NAND_REG_READ(r) \
- readl((const volatile void __iomem *)(CONFIG_SYS_NAND_BASE + r))
-
-static struct nand_bd *bd; /* DMA buffer descriptors */
-
-/**
- * axs101_nand_write_buf - write buffer to chip
- * @mtd: MTD device structure
- * @buf: data buffer
- * @len: number of bytes to write
- */
-static uint32_t nand_flag_is_set(uint32_t flag)
-{
- uint32_t reg = NAND_REG_READ(INT_STATUS);
-
- if (reg & (1 << NAND_ISR_CMDERROR))
- return 0;
-
- if (reg & (1 << flag)) {
- NAND_REG_WRITE(INT_CLR_STATUS, 1 << flag);
- return 1;
- }
-
- return 0;
-}
-
-/**
- * axs101_nand_write_buf - write buffer to chip
- * @mtd: MTD device structure
- * @buf: data buffer
- * @len: number of bytes to write
- */
-static void axs101_nand_write_buf(struct mtd_info *mtd, const u_char *buf,
- int len)
-{
- struct bounce_buffer bbstate;
-
- bounce_buffer_start(&bbstate, (void *)buf, len, GEN_BB_READ);
-
- /* Setup buffer descriptor */
- writel(BD_STAT_OWN | BD_STAT_BD_COMPLETE, &bd->status);
- writel(ALIGN(len, BUS_WIDTH) & BD_SIZES_BUFFER1_MASK, &bd->sizes);
- writel(bbstate.bounce_buffer, &bd->buffer_ptr0);
- writel(0, &bd->buffer_ptr1);
-
- /* Flush modified buffer descriptor */
- flush_dcache_range((unsigned long)bd,
- (unsigned long)bd + sizeof(struct nand_bd));
-
- /* Issue "write" command */
- NAND_REG_WRITE(AC_FIFO, B_CT_WRITE | B_WFR | B_IWC | B_LC | (len-1));
-
- /* Wait for NAND command and DMA to complete */
- while (!nand_flag_is_set(NAND_ISR_CMDDONE))
- ;
- while (!nand_flag_is_set(NAND_ISR_TXDMACOMPLETE))
- ;
-
- bounce_buffer_stop(&bbstate);
-}
-
-/**
- * axs101_nand_read_buf - read chip data into buffer
- * @mtd: MTD device structure
- * @buf: buffer to store data
- * @len: number of bytes to read
- */
-static void axs101_nand_read_buf(struct mtd_info *mtd, u_char *buf, int len)
-{
- struct bounce_buffer bbstate;
-
- bounce_buffer_start(&bbstate, buf, len, GEN_BB_WRITE);
-
- /* Setup buffer descriptor */
- writel(BD_STAT_OWN | BD_STAT_BD_COMPLETE, &bd->status);
- writel(ALIGN(len, BUS_WIDTH) & BD_SIZES_BUFFER1_MASK, &bd->sizes);
- writel(bbstate.bounce_buffer, &bd->buffer_ptr0);
- writel(0, &bd->buffer_ptr1);
-
- /* Flush modified buffer descriptor */
- flush_dcache_range((unsigned long)bd,
- (unsigned long)bd + sizeof(struct nand_bd));
-
- /* Issue "read" command */
- NAND_REG_WRITE(AC_FIFO, B_CT_READ | B_WFR | B_IWC | B_LC | (len - 1));
-
- /* Wait for NAND command and DMA to complete */
- while (!nand_flag_is_set(NAND_ISR_CMDDONE))
- ;
- while (!nand_flag_is_set(NAND_ISR_RXDMACOMPLETE))
- ;
-
- bounce_buffer_stop(&bbstate);
-}
-
-/**
- * axs101_nand_read_byte - read one byte from the chip
- * @mtd: MTD device structure
- */
-static u_char axs101_nand_read_byte(struct mtd_info *mtd)
-{
- u8 byte;
-
- axs101_nand_read_buf(mtd, (uchar *)&byte, sizeof(byte));
- return byte;
-}
-
-/**
- * axs101_nand_read_word - read one word from the chip
- * @mtd: MTD device structure
- */
-static u16 axs101_nand_read_word(struct mtd_info *mtd)
-{
- u16 word;
-
- axs101_nand_read_buf(mtd, (uchar *)&word, sizeof(word));
- return word;
-}
-
-/**
- * axs101_nand_hwcontrol - NAND control functions wrapper.
- * @mtd: MTD device structure
- * @cmd: Command
- */
-static void axs101_nand_hwcontrol(struct mtd_info *mtdinfo, int cmd,
- unsigned int ctrl)
-{
- if (cmd == NAND_CMD_NONE)
- return;
-
- cmd = cmd & 0xff;
-
- switch (ctrl & (NAND_ALE | NAND_CLE)) {
- /* Address */
- case NAND_ALE:
- cmd |= B_CT_ADDRESS;
- break;
-
- /* Command */
- case NAND_CLE:
- cmd |= B_CT_COMMAND | B_WFR;
-
- break;
-
- default:
- debug("%s: unknown ctrl %#x\n", __func__, ctrl);
- }
-
- NAND_REG_WRITE(AC_FIFO, cmd | B_LC);
- while (!nand_flag_is_set(NAND_ISR_CMDDONE))
- ;
-}
-
-int board_nand_init(struct nand_chip *nand)
-{
- bd = (struct nand_bd *)memalign(ARCH_DMA_MINALIGN,
- sizeof(struct nand_bd));
-
- /* Set buffer descriptor address in IDMAC */
- NAND_REG_WRITE(IDMAC_BDADDR, bd);
-
- nand->ecc.mode = NAND_ECC_SOFT;
- nand->cmd_ctrl = axs101_nand_hwcontrol;
- nand->read_byte = axs101_nand_read_byte;
- nand->read_word = axs101_nand_read_word;
- nand->write_buf = axs101_nand_write_buf;
- nand->read_buf = axs101_nand_read_buf;
-
- /* MBv3 has NAND IC with 16-bit data bus */
- if (gd->board_type == AXS_MB_V3)
- nand->options |= NAND_BUSWIDTH_16;
-
- return 0;
-}
--- /dev/null
+if TARGET_AXS10X
+
+config SYS_BOARD
+ default "axs10x"
+
+config SYS_VENDOR
+ default "synopsys"
+
+config SYS_CONFIG_NAME
+ default "axs10x"
+
+endif
--- /dev/null
+AXS10X BOARD
+M: Alexey Brodkin <abrodkin@synopsys.com>
+S: Maintained
+F: board/synopsys/axs10x/
+F: include/configs/axs10x.h
+F: configs/axs101_defconfig
+F: configs/axs103_defconfig
--- /dev/null
+#
+# Copyright (C) 2013-2016 Synopsys, Inc. All rights reserved.
+#
+# SPDX-License-Identifier: GPL-2.0+
+#
+
+obj-y += axs10x.o
+obj-$(CONFIG_CMD_NAND) += nand.o
--- /dev/null
+/*
+ * Copyright (C) 2013-2014 Synopsys, Inc. All rights reserved.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <dwmmc.h>
+#include <malloc.h>
+#include "axs10x.h"
+
+DECLARE_GLOBAL_DATA_PTR;
+
+int board_mmc_init(bd_t *bis)
+{
+ struct dwmci_host *host = NULL;
+
+ host = malloc(sizeof(struct dwmci_host));
+ if (!host) {
+ printf("dwmci_host malloc fail!\n");
+ return 1;
+ }
+
+ memset(host, 0, sizeof(struct dwmci_host));
+ host->name = "Synopsys Mobile storage";
+ host->ioaddr = (void *)ARC_DWMMC_BASE;
+ host->buswidth = 4;
+ host->dev_index = 0;
+ host->bus_hz = 50000000;
+
+ add_dwmci(host, host->bus_hz / 2, 400000);
+
+ return 0;
+}
+
+#define AXS_MB_CREG 0xE0011000
+
+int board_early_init_f(void)
+{
+ if (readl((void __iomem *)AXS_MB_CREG + 0x234) & (1 << 28))
+ gd->board_type = AXS_MB_V3;
+ else
+ gd->board_type = AXS_MB_V2;
+
+ return 0;
+}
+
+#ifdef CONFIG_ISA_ARCV2
+#define RESET_VECTOR_ADDR 0x0
+
+void smp_set_core_boot_addr(unsigned long addr, int corenr)
+{
+ /* All cores have reset vector pointing to 0 */
+ writel(addr, (void __iomem *)RESET_VECTOR_ADDR);
+
+ /* Make sure other cores see written value in memory */
+ flush_dcache_all();
+}
+
+void smp_kick_all_cpus(void)
+{
+/* CPU start CREG */
+#define AXC003_CREG_CPU_START 0xF0001400
+
+/* Bits positions in CPU start CREG */
+#define BITS_START 0
+#define BITS_POLARITY 8
+#define BITS_CORE_SEL 9
+#define BITS_MULTICORE 12
+
+#define CMD (1 << BITS_MULTICORE) | (1 << BITS_CORE_SEL) | \
+ (1 << BITS_POLARITY) | (1 << BITS_START)
+
+ writel(CMD, (void __iomem *)AXC003_CREG_CPU_START);
+}
+#endif
--- /dev/null
+/*
+ * Copyright (C) 2015 Synopsys, Inc. All rights reserved.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef _BOARD_SYNOPSYS_AXS10X_H
+#define _BOARD_SYNOPSYS_AXS10X_H
+
+enum {
+ AXS_MB_V2,
+ AXS_MB_V3
+};
+
+#endif /* _BOARD_SYNOPSYS_AXS10X_H */
+
--- /dev/null
+/*
+ * Copyright (C) 2013-2014 Synopsys, Inc. All rights reserved.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <bouncebuf.h>
+#include <common.h>
+#include <malloc.h>
+#include <nand.h>
+#include <asm/io.h>
+#include "axs10x.h"
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#define BUS_WIDTH 8 /* AXI data bus width in bytes */
+
+/* DMA buffer descriptor bits & masks */
+#define BD_STAT_OWN (1 << 31)
+#define BD_STAT_BD_FIRST (1 << 3)
+#define BD_STAT_BD_LAST (1 << 2)
+#define BD_SIZES_BUFFER1_MASK 0xfff
+
+#define BD_STAT_BD_COMPLETE (BD_STAT_BD_FIRST | BD_STAT_BD_LAST)
+
+/* Controller command flags */
+#define B_WFR (1 << 19) /* 1b - Wait for ready */
+#define B_LC (1 << 18) /* 1b - Last cycle */
+#define B_IWC (1 << 13) /* 1b - Interrupt when complete */
+
+/* NAND cycle types */
+#define B_CT_ADDRESS (0x0 << 16) /* Address operation */
+#define B_CT_COMMAND (0x1 << 16) /* Command operation */
+#define B_CT_WRITE (0x2 << 16) /* Write operation */
+#define B_CT_READ (0x3 << 16) /* Write operation */
+
+enum nand_isr_t {
+ NAND_ISR_DATAREQUIRED = 0,
+ NAND_ISR_TXUNDERFLOW,
+ NAND_ISR_TXOVERFLOW,
+ NAND_ISR_DATAAVAILABLE,
+ NAND_ISR_RXUNDERFLOW,
+ NAND_ISR_RXOVERFLOW,
+ NAND_ISR_TXDMACOMPLETE,
+ NAND_ISR_RXDMACOMPLETE,
+ NAND_ISR_DESCRIPTORUNAVAILABLE,
+ NAND_ISR_CMDDONE,
+ NAND_ISR_CMDAVAILABLE,
+ NAND_ISR_CMDERROR,
+ NAND_ISR_DATATRANSFEROVER,
+ NAND_ISR_NONE
+};
+
+enum nand_regs_t {
+ AC_FIFO = 0, /* address and command fifo */
+ IDMAC_BDADDR = 0x18, /* idmac descriptor list base address */
+ INT_STATUS = 0x118, /* interrupt status register */
+ INT_CLR_STATUS = 0x120, /* interrupt clear status register */
+};
+
+struct nand_bd {
+ uint32_t status; /* DES0 */
+ uint32_t sizes; /* DES1 */
+ uint32_t buffer_ptr0; /* DES2 */
+ uint32_t buffer_ptr1; /* DES3 */
+};
+
+#define NAND_REG_WRITE(r, v) \
+ writel(v, (volatile void __iomem *)(CONFIG_SYS_NAND_BASE + r))
+#define NAND_REG_READ(r) \
+ readl((const volatile void __iomem *)(CONFIG_SYS_NAND_BASE + r))
+
+static struct nand_bd *bd; /* DMA buffer descriptors */
+
+/**
+ * axs101_nand_write_buf - write buffer to chip
+ * @mtd: MTD device structure
+ * @buf: data buffer
+ * @len: number of bytes to write
+ */
+static uint32_t nand_flag_is_set(uint32_t flag)
+{
+ uint32_t reg = NAND_REG_READ(INT_STATUS);
+
+ if (reg & (1 << NAND_ISR_CMDERROR))
+ return 0;
+
+ if (reg & (1 << flag)) {
+ NAND_REG_WRITE(INT_CLR_STATUS, 1 << flag);
+ return 1;
+ }
+
+ return 0;
+}
+
+/**
+ * axs101_nand_write_buf - write buffer to chip
+ * @mtd: MTD device structure
+ * @buf: data buffer
+ * @len: number of bytes to write
+ */
+static void axs101_nand_write_buf(struct mtd_info *mtd, const u_char *buf,
+ int len)
+{
+ struct bounce_buffer bbstate;
+
+ bounce_buffer_start(&bbstate, (void *)buf, len, GEN_BB_READ);
+
+ /* Setup buffer descriptor */
+ writel(BD_STAT_OWN | BD_STAT_BD_COMPLETE, &bd->status);
+ writel(ALIGN(len, BUS_WIDTH) & BD_SIZES_BUFFER1_MASK, &bd->sizes);
+ writel(bbstate.bounce_buffer, &bd->buffer_ptr0);
+ writel(0, &bd->buffer_ptr1);
+
+ /* Flush modified buffer descriptor */
+ flush_dcache_range((unsigned long)bd,
+ (unsigned long)bd + sizeof(struct nand_bd));
+
+ /* Issue "write" command */
+ NAND_REG_WRITE(AC_FIFO, B_CT_WRITE | B_WFR | B_IWC | B_LC | (len-1));
+
+ /* Wait for NAND command and DMA to complete */
+ while (!nand_flag_is_set(NAND_ISR_CMDDONE))
+ ;
+ while (!nand_flag_is_set(NAND_ISR_TXDMACOMPLETE))
+ ;
+
+ bounce_buffer_stop(&bbstate);
+}
+
+/**
+ * axs101_nand_read_buf - read chip data into buffer
+ * @mtd: MTD device structure
+ * @buf: buffer to store data
+ * @len: number of bytes to read
+ */
+static void axs101_nand_read_buf(struct mtd_info *mtd, u_char *buf, int len)
+{
+ struct bounce_buffer bbstate;
+
+ bounce_buffer_start(&bbstate, buf, len, GEN_BB_WRITE);
+
+ /* Setup buffer descriptor */
+ writel(BD_STAT_OWN | BD_STAT_BD_COMPLETE, &bd->status);
+ writel(ALIGN(len, BUS_WIDTH) & BD_SIZES_BUFFER1_MASK, &bd->sizes);
+ writel(bbstate.bounce_buffer, &bd->buffer_ptr0);
+ writel(0, &bd->buffer_ptr1);
+
+ /* Flush modified buffer descriptor */
+ flush_dcache_range((unsigned long)bd,
+ (unsigned long)bd + sizeof(struct nand_bd));
+
+ /* Issue "read" command */
+ NAND_REG_WRITE(AC_FIFO, B_CT_READ | B_WFR | B_IWC | B_LC | (len - 1));
+
+ /* Wait for NAND command and DMA to complete */
+ while (!nand_flag_is_set(NAND_ISR_CMDDONE))
+ ;
+ while (!nand_flag_is_set(NAND_ISR_RXDMACOMPLETE))
+ ;
+
+ bounce_buffer_stop(&bbstate);
+}
+
+/**
+ * axs101_nand_read_byte - read one byte from the chip
+ * @mtd: MTD device structure
+ */
+static u_char axs101_nand_read_byte(struct mtd_info *mtd)
+{
+ u8 byte;
+
+ axs101_nand_read_buf(mtd, (uchar *)&byte, sizeof(byte));
+ return byte;
+}
+
+/**
+ * axs101_nand_read_word - read one word from the chip
+ * @mtd: MTD device structure
+ */
+static u16 axs101_nand_read_word(struct mtd_info *mtd)
+{
+ u16 word;
+
+ axs101_nand_read_buf(mtd, (uchar *)&word, sizeof(word));
+ return word;
+}
+
+/**
+ * axs101_nand_hwcontrol - NAND control functions wrapper.
+ * @mtd: MTD device structure
+ * @cmd: Command
+ */
+static void axs101_nand_hwcontrol(struct mtd_info *mtdinfo, int cmd,
+ unsigned int ctrl)
+{
+ if (cmd == NAND_CMD_NONE)
+ return;
+
+ cmd = cmd & 0xff;
+
+ switch (ctrl & (NAND_ALE | NAND_CLE)) {
+ /* Address */
+ case NAND_ALE:
+ cmd |= B_CT_ADDRESS;
+ break;
+
+ /* Command */
+ case NAND_CLE:
+ cmd |= B_CT_COMMAND | B_WFR;
+
+ break;
+
+ default:
+ debug("%s: unknown ctrl %#x\n", __func__, ctrl);
+ }
+
+ NAND_REG_WRITE(AC_FIFO, cmd | B_LC);
+ while (!nand_flag_is_set(NAND_ISR_CMDDONE))
+ ;
+}
+
+int board_nand_init(struct nand_chip *nand)
+{
+ bd = (struct nand_bd *)memalign(ARCH_DMA_MINALIGN,
+ sizeof(struct nand_bd));
+
+ /* Set buffer descriptor address in IDMAC */
+ NAND_REG_WRITE(IDMAC_BDADDR, bd);
+
+ nand->ecc.mode = NAND_ECC_SOFT;
+ nand->cmd_ctrl = axs101_nand_hwcontrol;
+ nand->read_byte = axs101_nand_read_byte;
+ nand->read_word = axs101_nand_read_word;
+ nand->write_buf = axs101_nand_write_buf;
+ nand->read_buf = axs101_nand_read_buf;
+
+ /* MBv3 has NAND IC with 16-bit data bus */
+ if (gd->board_type == AXS_MB_V3)
+ nand->options |= NAND_BUSWIDTH_16;
+
+ return 0;
+}
CONFIG_ARC=y
CONFIG_SYS_DCACHE_OFF=y
-CONFIG_DM_SERIAL=y
CONFIG_SYS_CLK_FREQ=750000000
+CONFIG_DM_SERIAL=y
CONFIG_SYS_TEXT_BASE=0x81000000
CONFIG_DEFAULT_DEVICE_TREE="axs10x"
CONFIG_BOOTDELAY=3
CONFIG_ARC=y
CONFIG_ISA_ARCV2=y
-CONFIG_DM_SERIAL=y
CONFIG_SYS_CLK_FREQ=100000000
+CONFIG_DM_SERIAL=y
CONFIG_SYS_TEXT_BASE=0x81000000
CONFIG_DEFAULT_DEVICE_TREE="axs10x"
CONFIG_BOOTDELAY=3
+++ /dev/null
-/*
- * Copyright (C) 2013-2014 Synopsys, Inc. All rights reserved.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#ifndef _CONFIG_AXS101_H_
-#define _CONFIG_AXS101_H_
-
-/*
- * CPU configuration
- */
-#define CONFIG_SYS_TIMER_RATE CONFIG_SYS_CLK_FREQ
-
-#define ARC_FPGA_PERIPHERAL_BASE 0xE0000000
-#define ARC_APB_PERIPHERAL_BASE 0xF0000000
-#define ARC_DWMMC_BASE (ARC_FPGA_PERIPHERAL_BASE + 0x15000)
-#define ARC_DWGMAC_BASE (ARC_FPGA_PERIPHERAL_BASE + 0x18000)
-
-/*
- * Memory configuration
- */
-#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
-
-#define CONFIG_SYS_DDR_SDRAM_BASE 0x80000000
-#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE
-#define CONFIG_SYS_SDRAM_SIZE 0x20000000 /* 512 Mb */
-
-#define CONFIG_SYS_INIT_SP_ADDR \
- (CONFIG_SYS_SDRAM_BASE + 0x1000 - GENERATED_GBL_DATA_SIZE)
-
-#define CONFIG_SYS_MALLOC_LEN 0x200000 /* 2 MB */
-#define CONFIG_SYS_BOOTM_LEN 0x2000000 /* 32 MB */
-#define CONFIG_SYS_LOAD_ADDR 0x82000000
-
-/*
- * This board might be of different versions so handle it
- */
-#define CONFIG_BOARD_TYPES
-#define CONFIG_BOARD_EARLY_INIT_F
-
-/*
- * NAND Flash configuration
- */
-#define CONFIG_SYS_NO_FLASH
-#define CONFIG_SYS_NAND_BASE (ARC_FPGA_PERIPHERAL_BASE + 0x16000)
-#define CONFIG_SYS_MAX_NAND_DEVICE 1
-
-/*
- * UART configuration
- */
-#define CONFIG_DW_SERIAL
-#define CONFIG_SYS_NS16550_SERIAL
-#define CONFIG_SYS_NS16550_CLK 33333333
-#define CONFIG_SYS_NS16550_MEM32
-#define CONFIG_BAUDRATE 115200
-
-/*
- * I2C configuration
- */
-#define CONFIG_SYS_I2C
-#define CONFIG_I2C_ENV_EEPROM_BUS 2
-#define CONFIG_SYS_I2C_SPEED 100000
-#define CONFIG_SYS_I2C_SPEED1 100000
-#define CONFIG_SYS_I2C_SPEED2 100000
-#define CONFIG_SYS_I2C_SLAVE 0
-#define CONFIG_SYS_I2C_SLAVE1 0
-#define CONFIG_SYS_I2C_SLAVE2 0
-#define CONFIG_SYS_I2C_BASE 0xE001D000
-#define CONFIG_SYS_I2C_BASE1 0xE001E000
-#define CONFIG_SYS_I2C_BASE2 0xE001F000
-#define CONFIG_SYS_I2C_BUS_MAX 3
-#define IC_CLK 50
-
-/*
- * EEPROM configuration
- */
-#define CONFIG_SYS_I2C_EEPROM_ADDR (0xA8 >> 1)
-#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
-#define CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW 1
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 64
-
-/*
- * SD/MMC configuration
- */
-#define CONFIG_MMC
-#define CONFIG_GENERIC_MMC
-#define CONFIG_DWMMC
-#define CONFIG_DOS_PARTITION
-
-/*
- * Ethernet PHY configuration
- */
-#define CONFIG_MII
-#define CONFIG_PHY_GIGE
-
-/*
- * USB 1.1 configuration
- */
-#define CONFIG_USB_OHCI_NEW
-#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 1
-
-/*
- * Commands still not supported in Kconfig
- */
-#define CONFIG_CMD_NAND
-
-#define CONFIG_AUTO_COMPLETE
-#define CONFIG_SYS_MAXARGS 16
-
-/*
- * Environment settings
- */
-#define CONFIG_ENV_IS_IN_EEPROM
-#define CONFIG_ENV_SIZE 0x00200 /* 512 bytes */
-#define CONFIG_ENV_OFFSET 0
-
-/*
- * Environment configuration
- */
-#define CONFIG_BOOTFILE "uImage"
-#define CONFIG_BOOTARGS "console=ttyS3,115200n8"
-#define CONFIG_LOADADDR CONFIG_SYS_LOAD_ADDR
-
-/*
- * Console configuration
- */
-#define CONFIG_SYS_LONGHELP
-#define CONFIG_SYS_CBSIZE 256
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
- sizeof(CONFIG_SYS_PROMPT) + 16)
-
-/*
- * Misc utility configuration
- */
-#define CONFIG_BOUNCE_BUFFER
-
-#endif /* _CONFIG_AXS101_H_ */
--- /dev/null
+/*
+ * Copyright (C) 2013-2016 Synopsys, Inc. All rights reserved.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef _CONFIG_AXS10X_H_
+#define _CONFIG_AXS10X_H_
+
+#include <linux/sizes.h>
+/*
+ * CPU configuration
+ */
+#define CONFIG_SYS_TIMER_RATE CONFIG_SYS_CLK_FREQ
+
+#define ARC_FPGA_PERIPHERAL_BASE 0xE0000000
+#define ARC_APB_PERIPHERAL_BASE 0xF0000000
+#define ARC_DWMMC_BASE (ARC_FPGA_PERIPHERAL_BASE + 0x15000)
+#define ARC_DWGMAC_BASE (ARC_FPGA_PERIPHERAL_BASE + 0x18000)
+
+/*
+ * Memory configuration
+ */
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
+
+#define CONFIG_SYS_DDR_SDRAM_BASE 0x80000000
+#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE
+#define CONFIG_SYS_SDRAM_SIZE SZ_512M
+
+#define CONFIG_SYS_INIT_SP_ADDR \
+ (CONFIG_SYS_SDRAM_BASE + 0x1000 - GENERATED_GBL_DATA_SIZE)
+
+#define CONFIG_SYS_MALLOC_LEN SZ_2M
+#define CONFIG_SYS_BOOTM_LEN SZ_32M
+#define CONFIG_SYS_LOAD_ADDR 0x82000000
+
+/*
+ * This board might be of different versions so handle it
+ */
+#define CONFIG_BOARD_TYPES
+#define CONFIG_BOARD_EARLY_INIT_F
+
+/*
+ * NAND Flash configuration
+ */
+#define CONFIG_SYS_NO_FLASH
+#define CONFIG_SYS_NAND_BASE (ARC_FPGA_PERIPHERAL_BASE + 0x16000)
+#define CONFIG_SYS_MAX_NAND_DEVICE 1
+
+/*
+ * UART configuration
+ */
+#define CONFIG_DW_SERIAL
+#define CONFIG_SYS_NS16550_SERIAL
+#define CONFIG_SYS_NS16550_CLK 33333333
+#define CONFIG_SYS_NS16550_MEM32
+#define CONFIG_BAUDRATE 115200
+
+/*
+ * I2C configuration
+ */
+#define CONFIG_SYS_I2C
+#define CONFIG_I2C_ENV_EEPROM_BUS 2
+#define CONFIG_SYS_I2C_SPEED 100000
+#define CONFIG_SYS_I2C_SPEED1 100000
+#define CONFIG_SYS_I2C_SPEED2 100000
+#define CONFIG_SYS_I2C_SLAVE 0
+#define CONFIG_SYS_I2C_SLAVE1 0
+#define CONFIG_SYS_I2C_SLAVE2 0
+#define CONFIG_SYS_I2C_BASE 0xE001D000
+#define CONFIG_SYS_I2C_BASE1 0xE001E000
+#define CONFIG_SYS_I2C_BASE2 0xE001F000
+#define CONFIG_SYS_I2C_BUS_MAX 3
+#define IC_CLK 50
+
+/*
+ * EEPROM configuration
+ */
+#define CONFIG_SYS_I2C_EEPROM_ADDR (0xA8 >> 1)
+#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
+#define CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW 1
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 64
+
+/*
+ * SD/MMC configuration
+ */
+#define CONFIG_MMC
+#define CONFIG_GENERIC_MMC
+#define CONFIG_DWMMC
+#define CONFIG_DOS_PARTITION
+
+/*
+ * Ethernet PHY configuration
+ */
+#define CONFIG_MII
+#define CONFIG_PHY_GIGE
+
+/*
+ * USB 1.1 configuration
+ */
+#define CONFIG_USB_OHCI_NEW
+#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 1
+
+/*
+ * Commands still not supported in Kconfig
+ */
+#define CONFIG_CMD_NAND
+
+#define CONFIG_AUTO_COMPLETE
+#define CONFIG_SYS_MAXARGS 16
+
+/*
+ * Environment settings
+ */
+#define CONFIG_ENV_IS_IN_EEPROM
+#define CONFIG_ENV_SIZE SZ_512
+#define CONFIG_ENV_OFFSET 0
+
+/*
+ * Environment configuration
+ */
+#define CONFIG_BOOTFILE "uImage"
+#define CONFIG_BOOTARGS "console=ttyS3,115200n8"
+#define CONFIG_LOADADDR CONFIG_SYS_LOAD_ADDR
+
+/*
+ * Console configuration
+ */
+#define CONFIG_SYS_LONGHELP
+#define CONFIG_SYS_CBSIZE SZ_256
+#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
+ sizeof(CONFIG_SYS_PROMPT) + 16)
+
+/*
+ * Misc utility configuration
+ */
+#define CONFIG_BOUNCE_BUFFER
+
+#endif /* _CONFIG_AXS10X_H_ */
projects / oweals / u-boot.git / commitdiff