#endif
#if CONFIG_IS_ENABLED(GMAC_ROCKCHIP)
-static ulong rk3368_gmac_set_clk(struct rk3368_cru *cru,
- ulong clk_id, ulong set_rate)
+static ulong rk3368_gmac_set_clk(struct rk3368_cru *cru, ulong set_rate)
{
+ ulong ret;
+
/*
- * This models the 'assigned-clock-parents = <&ext_gmac>' from
- * the DTS and switches to the 'ext_gmac' clock parent.
+ * The gmac clock can be derived either from an external clock
+ * or can be generated from internally by a divider from SCLK_MAC.
*/
- rk_setreg(&cru->clksel_con[43], GMAC_MUX_SEL_EXTCLK);
- return set_rate;
+ if (readl(&cru->clksel_con[43]) & GMAC_MUX_SEL_EXTCLK) {
+ /* An external clock will always generate the right rate... */
+ ret = set_rate;
+ } else {
+ u32 con = readl(&cru->clksel_con[43]);
+ ulong pll_rate;
+ u8 div;
+
+ if (((con >> GMAC_PLL_SHIFT) & GMAC_PLL_MASK) ==
+ GMAC_PLL_SELECT_GENERAL)
+ pll_rate = GPLL_HZ;
+ else if (((con >> GMAC_PLL_SHIFT) & GMAC_PLL_MASK) ==
+ GMAC_PLL_SELECT_CODEC)
+ pll_rate = CPLL_HZ;
+ else
+ /* CPLL is not set */
+ return -EPERM;
+
+ div = DIV_ROUND_UP(pll_rate, set_rate) - 1;
+ if (div <= 0x1f)
+ rk_clrsetreg(&cru->clksel_con[43], GMAC_DIV_CON_MASK,
+ div << GMAC_DIV_CON_SHIFT);
+ else
+ debug("Unsupported div for gmac:%d\n", div);
+
+ return DIV_TO_RATE(pll_rate, div);
+ }
+
+ return ret;
}
#endif
#if CONFIG_IS_ENABLED(GMAC_ROCKCHIP)
case SCLK_MAC:
/* select the external clock */
- ret = rk3368_gmac_set_clk(priv->cru, clk->id, rate);
+ ret = rk3368_gmac_set_clk(priv->cru, rate);
break;
#endif
case SCLK_SARADC:
return ret;
}
+static int rk3368_gmac_set_parent(struct clk *clk, struct clk *parent)
+{
+ struct rk3368_clk_priv *priv = dev_get_priv(clk->dev);
+ struct rk3368_cru *cru = priv->cru;
+ const char *clock_output_name;
+ int ret;
+
+ /*
+ * If the requested parent is in the same clock-controller and
+ * the id is SCLK_MAC ("sclk_mac"), switch to the internal
+ * clock.
+ */
+ if ((parent->dev == clk->dev) && (parent->id == SCLK_MAC)) {
+ debug("%s: switching GAMC to SCLK_MAC\n", __func__);
+ rk_clrreg(&cru->clksel_con[43], GMAC_MUX_SEL_EXTCLK);
+ return 0;
+ }
+
+ /*
+ * Otherwise, we need to check the clock-output-names of the
+ * requested parent to see if the requested id is "ext_gmac".
+ */
+ ret = dev_read_string_index(parent->dev, "clock-output-names",
+ parent->id, &clock_output_name);
+ if (ret < 0)
+ return -ENODATA;
+
+ /* If this is "ext_gmac", switch to the external clock input */
+ if (!strcmp(clock_output_name, "ext_gmac")) {
+ debug("%s: switching GMAC to external clock\n", __func__);
+ rk_setreg(&cru->clksel_con[43], GMAC_MUX_SEL_EXTCLK);
+ return 0;
+ }
+
+ return -EINVAL;
+}
+
+static int rk3368_clk_set_parent(struct clk *clk, struct clk *parent)
+{
+ switch (clk->id) {
+ case SCLK_MAC:
+ return rk3368_gmac_set_parent(clk, parent);
+ }
+
+ debug("%s: unsupported clk %ld\n", __func__, clk->id);
+ return -ENOENT;
+}
+
static struct clk_ops rk3368_clk_ops = {
.get_rate = rk3368_clk_get_rate,
.set_rate = rk3368_clk_set_rate,
+ .set_parent = rk3368_clk_set_parent,
};
static int rk3368_clk_probe(struct udevice *dev)