Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
MS7720SE SH7720
+ R0P77520000RZ SH7752
R0P77570030RL SH7757
R0P77850011RL SH7785
CONFIG_SF_DEFAULT_MODE (see include/spi.h)
CONFIG_SF_DEFAULT_SPEED in Hz
+ CONFIG_CMD_SF_TEST
+
+ Define this option to include a destructive SPI flash
+ test ('sf test').
+
- SystemACE Support:
CONFIG_SYSTEMACE
# include <asm/cpu_sh7724.h>
#elif defined (CONFIG_CPU_SH7734)
# include <asm/cpu_sh7734.h>
+#elif defined (CONFIG_CPU_SH7752)
+# include <asm/cpu_sh7752.h>
#elif defined (CONFIG_CPU_SH7757)
# include <asm/cpu_sh7757.h>
#elif defined (CONFIG_CPU_SH7763)
--- /dev/null
+/*
+ * Copyright (C) 2012 Renesas Solutions Corp.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+
+#ifndef _ASM_CPU_SH7752_H_
+#define _ASM_CPU_SH7752_H_
+
+#define CCR 0xFF00001C
+#define WTCNT 0xFFCC0000
+#define CCR_CACHE_INIT 0x0000090b
+#define CACHE_OC_NUM_WAYS 1
+
+#ifndef __ASSEMBLY__ /* put C only stuff in this section */
+/* MMU */
+struct mmu_regs {
+ unsigned int reserved[4];
+ unsigned int mmucr;
+};
+#define MMU_BASE ((struct mmu_regs *)0xff000000)
+
+/* Watchdog */
+#define WTCSR0 0xffcc0002
+#define WRSTCSR_R 0xffcc0003
+#define WRSTCSR_W 0xffcc0002
+#define WTCSR_PREFIX 0xa500
+#define WRSTCSR_PREFIX 0x6900
+#define WRSTCSR_WOVF_PREFIX 0x9600
+
+/* SCIF */
+#define SCIF0_BASE 0xfe4b0000 /* The real name is SCIF2 */
+#define SCIF1_BASE 0xfe4c0000 /* The real name is SCIF3 */
+#define SCIF2_BASE 0xfe4d0000 /* The real name is SCIF4 */
+
+/* TMU0 */
+#define TMU_BASE 0xFE430000
+
+/* ETHER, GETHER MAC address */
+struct ether_mac_regs {
+ unsigned int reserved[114];
+ unsigned int mahr;
+ unsigned int reserved2;
+ unsigned int malr;
+};
+#define GETHER0_MAC_BASE ((struct ether_mac_regs *)0xfee0400)
+#define GETHER1_MAC_BASE ((struct ether_mac_regs *)0xfee0c00)
+#define ETHER0_MAC_BASE ((struct ether_mac_regs *)0xfef0000)
+#define ETHER1_MAC_BASE ((struct ether_mac_regs *)0xfef0800)
+
+/* GETHER */
+struct gether_control_regs {
+ unsigned int gbecont;
+};
+#define GETHER_CONTROL_BASE ((struct gether_control_regs *)0xffc10100)
+#define GBECONT_RMII1 0x00020000
+#define GBECONT_RMII0 0x00010000
+
+/* SerMux */
+struct sermux_regs {
+ unsigned char smr0;
+ unsigned char smr1;
+ unsigned char smr2;
+ unsigned char smr3;
+ unsigned char smr4;
+ unsigned char smr5;
+};
+#define SERMUX_BASE ((struct sermux_regs *)0xfe470000)
+
+
+/* USB0/1 */
+struct usb_common_regs {
+ unsigned short reserved[129];
+ unsigned short suspmode;
+};
+#define USB0_COMMON_BASE ((struct usb_common_regs *)0xfe450000)
+#define USB1_COMMON_BASE ((struct usb_common_regs *)0xfe4f0000)
+
+struct usb0_phy_regs {
+ unsigned short reset;
+ unsigned short reserved[4];
+ unsigned short portsel;
+};
+#define USB0_PHY_BASE ((struct usb0_phy_regs *)0xfe5f0000)
+
+struct usb1_port_regs {
+ unsigned int port1sel;
+ unsigned int reserved;
+ unsigned int usb1intsts;
+};
+#define USB1_PORT_BASE ((struct usb1_port_regs *)0xfe4f2000)
+
+struct usb1_alignment_regs {
+ unsigned int ehcidatac; /* 0xfe4fe018 */
+ unsigned int reserved[63];
+ unsigned int ohcidatac;
+};
+#define USB1_ALIGNMENT_BASE ((struct usb1_alignment_regs *)0xfe4fe018)
+
+/* GPIO */
+struct gpio_regs {
+ unsigned short pacr;
+ unsigned short pbcr;
+ unsigned short pccr;
+ unsigned short pdcr;
+ unsigned short pecr;
+ unsigned short pfcr;
+ unsigned short pgcr;
+ unsigned short phcr;
+ unsigned short picr;
+ unsigned short pjcr;
+ unsigned short pkcr;
+ unsigned short plcr;
+ unsigned short pmcr;
+ unsigned short pncr;
+ unsigned short pocr;
+ unsigned short reserved;
+ unsigned short pqcr;
+ unsigned short prcr;
+ unsigned short pscr;
+ unsigned short ptcr;
+ unsigned short pucr;
+ unsigned short pvcr;
+ unsigned short pwcr;
+ unsigned short pxcr;
+ unsigned short pycr;
+ unsigned short pzcr;
+ unsigned char padr;
+ unsigned char reserved_a;
+ unsigned char pbdr;
+ unsigned char reserved_b;
+ unsigned char pcdr;
+ unsigned char reserved_c;
+ unsigned char pddr;
+ unsigned char reserved_d;
+ unsigned char pedr;
+ unsigned char reserved_e;
+ unsigned char pfdr;
+ unsigned char reserved_f;
+ unsigned char pgdr;
+ unsigned char reserved_g;
+ unsigned char phdr;
+ unsigned char reserved_h;
+ unsigned char pidr;
+ unsigned char reserved_i;
+ unsigned char pjdr;
+ unsigned char reserved_j;
+ unsigned char pkdr;
+ unsigned char reserved_k;
+ unsigned char pldr;
+ unsigned char reserved_l;
+ unsigned char pmdr;
+ unsigned char reserved_m;
+ unsigned char pndr;
+ unsigned char reserved_n;
+ unsigned char podr;
+ unsigned char reserved_o;
+ unsigned char ppdr;
+ unsigned char reserved_p;
+ unsigned char pqdr;
+ unsigned char reserved_q;
+ unsigned char prdr;
+ unsigned char reserved_r;
+ unsigned char psdr;
+ unsigned char reserved_s;
+ unsigned char ptdr;
+ unsigned char reserved_t;
+ unsigned char pudr;
+ unsigned char reserved_u;
+ unsigned char pvdr;
+ unsigned char reserved_v;
+ unsigned char pwdr;
+ unsigned char reserved_w;
+ unsigned char pxdr;
+ unsigned char reserved_x;
+ unsigned char pydr;
+ unsigned char reserved_y;
+ unsigned char pzdr;
+ unsigned char reserved_z;
+ unsigned short ncer;
+ unsigned short ncmcr;
+ unsigned short nccsr;
+ unsigned char reserved2[2];
+ unsigned short psel0; /* +0x70 */
+ unsigned short psel1;
+ unsigned short psel2;
+ unsigned short psel3;
+ unsigned short psel4;
+ unsigned short psel5;
+ unsigned short psel6;
+ unsigned short reserved3[2];
+ unsigned short psel7;
+};
+#define GPIO_BASE ((struct gpio_regs *)0xffec0000)
+
+#endif /* ifndef __ASSEMBLY__ */
+#endif /* _ASM_CPU_SH7752_H_ */
#include <netdev.h>
#include <net.h>
#include <i2c.h>
+#include <usb.h>
#include <twl4030.h>
#include <linux/compiler.h>
#include <asm/arch/mmc_host_def.h>
#include <asm/arch/sys_proto.h>
#include <asm/mach-types.h>
+#include <asm/ehci-omap.h>
+#include <asm/gpio.h>
#include "eeprom.h"
MUX_VAL(CP(HSUSB0_DATA6), (IEN | PTD | DIS | M0)); /*HSUSB0_DATA6*/
MUX_VAL(CP(HSUSB0_DATA7), (IEN | PTD | DIS | M0)); /*HSUSB0_DATA7*/
+ /* USB EHCI */
+ MUX_VAL(CP(ETK_D0_ES2), (IEN | PTD | EN | M3)); /*HSUSB1_DT0*/
+ MUX_VAL(CP(ETK_D1_ES2), (IEN | PTD | EN | M3)); /*HSUSB1_DT1*/
+ MUX_VAL(CP(ETK_D2_ES2), (IEN | PTD | EN | M3)); /*HSUSB1_DT2*/
+ MUX_VAL(CP(ETK_D7_ES2), (IEN | PTD | EN | M3)); /*HSUSB1_DT3*/
+ MUX_VAL(CP(ETK_D4_ES2), (IEN | PTD | EN | M3)); /*HSUSB1_DT4*/
+ MUX_VAL(CP(ETK_D5_ES2), (IEN | PTD | EN | M3)); /*HSUSB1_DT5*/
+ MUX_VAL(CP(ETK_D6_ES2), (IEN | PTD | EN | M3)); /*HSUSB1_DT6*/
+ MUX_VAL(CP(ETK_D3_ES2), (IEN | PTD | EN | M3)); /*HSUSB1_DT7*/
+ MUX_VAL(CP(ETK_D8_ES2), (IEN | PTD | EN | M3)); /*HSUSB1_DIR*/
+ MUX_VAL(CP(ETK_D9_ES2), (IEN | PTD | EN | M3)); /*HSUSB1_NXT*/
+ MUX_VAL(CP(ETK_CTL_ES2), (IDIS | PTD | DIS | M3)); /*HSUSB1_CLK*/
+ MUX_VAL(CP(ETK_CLK_ES2), (IDIS | PTU | DIS | M3)); /*HSUSB1_STP*/
+
+ MUX_VAL(CP(ETK_D14_ES2), (IEN | PTD | EN | M3)); /*HSUSB2_DT0*/
+ MUX_VAL(CP(ETK_D15_ES2), (IEN | PTD | EN | M3)); /*HSUSB2_DT1*/
+ MUX_VAL(CP(MCSPI1_CS3), (IEN | PTD | EN | M3)); /*HSUSB2_DT2*/
+ MUX_VAL(CP(MCSPI2_CS1), (IEN | PTD | EN | M3)); /*HSUSB2_DT3*/
+ MUX_VAL(CP(MCSPI2_SIMO), (IEN | PTD | EN | M3)); /*HSUSB2_DT4*/
+ MUX_VAL(CP(MCSPI2_SOMI), (IEN | PTD | EN | M3)); /*HSUSB2_DT5*/
+ MUX_VAL(CP(MCSPI2_CS0), (IEN | PTD | EN | M3)); /*HSUSB2_DT6*/
+ MUX_VAL(CP(MCSPI2_CLK), (IEN | PTD | EN | M3)); /*HSUSB2_DT7*/
+ MUX_VAL(CP(ETK_D12_ES2), (IEN | PTD | EN | M3)); /*HSUSB2_DIR*/
+ MUX_VAL(CP(ETK_D13_ES2), (IEN | PTD | EN | M3)); /*HSUSB2_NXT*/
+ MUX_VAL(CP(ETK_D10_ES2), (IDIS | PTD | DIS | M3)); /*HSUSB2_CLK*/
+ MUX_VAL(CP(ETK_D11_ES2), (IDIS | PTU | DIS | M3)); /*HSUSB2_STP*/
+
+ /* SB_T35_USB_HUB_RESET_GPIO */
+ MUX_VAL(CP(CAM_WEN), (IDIS | PTD | DIS | M4)); /*GPIO_167*/
+
/* I2C1 */
MUX_VAL(CP(I2C1_SCL), (IEN | PTU | EN | M0)); /*I2C1_SCL*/
MUX_VAL(CP(I2C1_SDA), (IEN | PTU | EN | M0)); /*I2C1_SDA*/
serialnr->low = 0;
serialnr->high = 0;
};
+
+#ifdef CONFIG_USB_EHCI_OMAP
+struct omap_usbhs_board_data usbhs_bdata = {
+ .port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
+ .port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
+ .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,
+};
+
+#define SB_T35_USB_HUB_RESET_GPIO 167
+int ehci_hcd_init(int index, struct ehci_hccr **hccr, struct ehci_hcor **hcor)
+{
+ u8 val;
+ int offset;
+
+ if (gpio_request(SB_T35_USB_HUB_RESET_GPIO, "SB-T35 usb hub reset")) {
+ printf("Error: can't obtain GPIO %d for SB-T35 usb hub reset",
+ SB_T35_USB_HUB_RESET_GPIO);
+ return -1;
+ }
+
+ gpio_direction_output(SB_T35_USB_HUB_RESET_GPIO, 0);
+ udelay(10);
+ gpio_set_value(SB_T35_USB_HUB_RESET_GPIO, 1);
+ udelay(1000);
+
+ offset = TWL4030_BASEADD_GPIO + TWL4030_GPIO_GPIODATADIR1;
+ twl4030_i2c_read_u8(TWL4030_CHIP_GPIO, &val, offset);
+ /* Set GPIO6 and GPIO7 of TPS65930 as output */
+ val |= 0xC0;
+ twl4030_i2c_write_u8(TWL4030_CHIP_GPIO, val, offset);
+ offset = TWL4030_BASEADD_GPIO + TWL4030_GPIO_SETGPIODATAOUT1;
+ /* Take both PHYs out of reset */
+ twl4030_i2c_write_u8(TWL4030_CHIP_GPIO, 0xC0, offset);
+ udelay(1);
+
+ return omap_ehci_hcd_init(&usbhs_bdata, hccr, hcor);
+}
+
+int ehci_hcd_stop(void)
+{
+ return omap_ehci_hcd_stop();
+}
+
+#endif /* CONFIG_USB_EHCI_OMAP */
#include <asm/arch/pxa.h>
#include <asm/arch/pxa-regs.h>
#include <asm/io.h>
+#include <usb.h>
DECLARE_GLOBAL_DATA_PTR;
+int board_eth_init(bd_t *bis)
+{
+ usb_eth_initialize(bis);
+ return 0;
+}
+
int board_init(void)
{
/* We have RAM, disable cache */
/* adress of boot parameters */
gd->bd->bi_boot_params = 0xa0000100;
+ /* Let host see that device is disconnected */
+ udc_disconnect();
+ mdelay(500);
+
return 0;
}
--- /dev/null
+#
+# Copyright (C) 2012 Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+
+include $(TOPDIR)/config.mk
+
+LIB = $(obj)lib$(BOARD).o
+
+COBJS := sh7752evb.o spi-boot.o
+SOBJS := lowlevel_init.o
+
+$(LIB): $(obj).depend $(COBJS) $(SOBJS)
+ $(call cmd_link_o_target, $(COBJS) $(SOBJS))
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
--- /dev/null
+/*
+ * Copyright (C) 2012 Renesas Solutions Corp.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <config.h>
+#include <version.h>
+#include <asm/processor.h>
+#include <asm/macro.h>
+
+.macro or32, addr, data
+ mov.l \addr, r1
+ mov.l \data, r0
+ mov.l @r1, r2
+ or r2, r0
+ mov.l r0, @r1
+.endm
+
+.macro wait_DBCMD
+ mov.l DBWAIT_A, r0
+ mov.l @r0, r1
+.endm
+
+ .global lowlevel_init
+ .section .spiboot1.text
+ .align 2
+
+lowlevel_init:
+ /*------- GPIO -------*/
+ write16 PDCR_A, PDCR_D ! SPI0
+ write16 PGCR_A, PGCR_D ! SPI0, GETHER MDIO gate(PTG1)
+ write16 PJCR_A, PJCR_D ! SCIF4
+ write16 PTCR_A, PTCR_D ! STATUS
+ write16 PSEL1_A, PSEL1_D ! SPI0
+ write16 PSEL2_A, PSEL2_D ! SPI0
+ write16 PSEL5_A, PSEL5_D ! STATUS
+
+ bra exit_gpio
+ nop
+
+ .align 2
+
+/*------- GPIO -------*/
+PDCR_A: .long 0xffec0006
+PGCR_A: .long 0xffec000c
+PJCR_A: .long 0xffec0012
+PTCR_A: .long 0xffec0026
+PSEL1_A: .long 0xffec0072
+PSEL2_A: .long 0xffec0074
+PSEL5_A: .long 0xffec007a
+
+PDCR_D: .long 0x0000
+PGCR_D: .long 0x0004
+PJCR_D: .long 0x0000
+PTCR_D: .long 0x0000
+PSEL1_D: .long 0x0000
+PSEL2_D: .long 0x3000
+PSEL5_D: .long 0x0ffc
+
+ .align 2
+
+exit_gpio:
+ mov #0, r14
+ mova 2f, r0
+ mov.l PC_MASK, r1
+ tst r0, r1
+ bf 2f
+
+ bra exit_pmb
+ nop
+
+ .align 2
+
+/* If CPU runs on SDRAM (PC=0x5???????) or not. */
+PC_MASK: .long 0x20000000
+
+2:
+ mov #1, r14
+
+ mov.l EXPEVT_A, r0
+ mov.l @r0, r0
+ mov.l EXPEVT_POWER_ON_RESET, r1
+ cmp/eq r0, r1
+ bt 1f
+
+ /*
+ * If EXPEVT value is manual reset or tlb multipul-hit,
+ * initialization of DDR3IF is not necessary.
+ */
+ bra exit_ddr
+ nop
+
+1:
+ /*------- Reset -------*/
+ write32 MRSTCR0_A, MRSTCR0_D
+ write32 MRSTCR1_A, MRSTCR1_D
+
+ /* For Core Reset */
+ mov.l DBACEN_A, r0
+ mov.l @r0, r0
+ cmp/eq #0, r0
+ bt 3f
+
+ /*
+ * If DBACEN == 1(DBSC was already enabled), we have to avoid the
+ * initialization of DDR3-SDRAM.
+ */
+ bra exit_ddr
+ nop
+
+3:
+ /*------- DDR3IF -------*/
+ /* oscillation stabilization time */
+ wait_timer WAIT_OSC_TIME
+
+ /* step 3 */
+ write32 DBCMD_A, DBCMD_RSTL_VAL
+ wait_timer WAIT_30US
+
+ /* step 4 */
+ write32 DBCMD_A, DBCMD_PDEN_VAL
+
+ /* step 5 */
+ write32 DBKIND_A, DBKIND_D
+
+ /* step 6 */
+ write32 DBCONF_A, DBCONF_D
+ write32 DBTR0_A, DBTR0_D
+ write32 DBTR1_A, DBTR1_D
+ write32 DBTR2_A, DBTR2_D
+ write32 DBTR3_A, DBTR3_D
+ write32 DBTR4_A, DBTR4_D
+ write32 DBTR5_A, DBTR5_D
+ write32 DBTR6_A, DBTR6_D
+ write32 DBTR7_A, DBTR7_D
+ write32 DBTR8_A, DBTR8_D
+ write32 DBTR9_A, DBTR9_D
+ write32 DBTR10_A, DBTR10_D
+ write32 DBTR11_A, DBTR11_D
+ write32 DBTR12_A, DBTR12_D
+ write32 DBTR13_A, DBTR13_D
+ write32 DBTR14_A, DBTR14_D
+ write32 DBTR15_A, DBTR15_D
+ write32 DBTR16_A, DBTR16_D
+ write32 DBTR17_A, DBTR17_D
+ write32 DBTR18_A, DBTR18_D
+ write32 DBTR19_A, DBTR19_D
+ write32 DBRNK0_A, DBRNK0_D
+
+ /* step 7 */
+ write32 DBPDCNT3_A, DBPDCNT3_D
+
+ /* step 8 */
+ write32 DBPDCNT1_A, DBPDCNT1_D
+ write32 DBPDCNT2_A, DBPDCNT2_D
+ write32 DBPDLCK_A, DBPDLCK_D
+ write32 DBPDRGA_A, DBPDRGA_D
+ write32 DBPDRGD_A, DBPDRGD_D
+
+ /* step 9 */
+ wait_timer WAIT_30US
+
+ /* step 10 */
+ write32 DBPDCNT0_A, DBPDCNT0_D
+
+ /* step 11 */
+ wait_timer WAIT_30US
+ wait_timer WAIT_30US
+
+ /* step 12 */
+ write32 DBCMD_A, DBCMD_WAIT_VAL
+ wait_DBCMD
+
+ /* step 13 */
+ write32 DBCMD_A, DBCMD_RSTH_VAL
+ wait_DBCMD
+
+ /* step 14 */
+ write32 DBCMD_A, DBCMD_WAIT_VAL
+ write32 DBCMD_A, DBCMD_WAIT_VAL
+ write32 DBCMD_A, DBCMD_WAIT_VAL
+ write32 DBCMD_A, DBCMD_WAIT_VAL
+
+ /* step 15 */
+ write32 DBCMD_A, DBCMD_PDXT_VAL
+
+ /* step 16 */
+ write32 DBCMD_A, DBCMD_MRS2_VAL
+
+ /* step 17 */
+ write32 DBCMD_A, DBCMD_MRS3_VAL
+
+ /* step 18 */
+ write32 DBCMD_A, DBCMD_MRS1_VAL
+
+ /* step 19 */
+ write32 DBCMD_A, DBCMD_MRS0_VAL
+
+ /* step 20 */
+ write32 DBCMD_A, DBCMD_ZQCL_VAL
+
+ write32 DBCMD_A, DBCMD_REF_VAL
+ write32 DBCMD_A, DBCMD_REF_VAL
+ wait_DBCMD
+
+ /* step 21 */
+ write32 DBADJ0_A, DBADJ0_D
+ write32 DBADJ1_A, DBADJ1_D
+ write32 DBADJ2_A, DBADJ2_D
+
+ /* step 22 */
+ write32 DBRFCNF0_A, DBRFCNF0_D
+ write32 DBRFCNF1_A, DBRFCNF1_D
+ write32 DBRFCNF2_A, DBRFCNF2_D
+
+ /* step 23 */
+ write32 DBCALCNF_A, DBCALCNF_D
+
+ /* step 24 */
+ write32 DBRFEN_A, DBRFEN_D
+ write32 DBCMD_A, DBCMD_SRXT_VAL
+
+ /* step 25 */
+ write32 DBACEN_A, DBACEN_D
+
+ /* step 26 */
+ wait_DBCMD
+
+ bra exit_ddr
+ nop
+
+ .align 2
+
+EXPEVT_A: .long 0xff000024
+EXPEVT_POWER_ON_RESET: .long 0x00000000
+
+/*------- Reset -------*/
+MRSTCR0_A: .long 0xffd50030
+MRSTCR0_D: .long 0xfe1ffe7f
+MRSTCR1_A: .long 0xffd50034
+MRSTCR1_D: .long 0xfff3ffff
+
+/*------- DDR3IF -------*/
+DBCMD_A: .long 0xfe800018
+DBKIND_A: .long 0xfe800020
+DBCONF_A: .long 0xfe800024
+DBTR0_A: .long 0xfe800040
+DBTR1_A: .long 0xfe800044
+DBTR2_A: .long 0xfe800048
+DBTR3_A: .long 0xfe800050
+DBTR4_A: .long 0xfe800054
+DBTR5_A: .long 0xfe800058
+DBTR6_A: .long 0xfe80005c
+DBTR7_A: .long 0xfe800060
+DBTR8_A: .long 0xfe800064
+DBTR9_A: .long 0xfe800068
+DBTR10_A: .long 0xfe80006c
+DBTR11_A: .long 0xfe800070
+DBTR12_A: .long 0xfe800074
+DBTR13_A: .long 0xfe800078
+DBTR14_A: .long 0xfe80007c
+DBTR15_A: .long 0xfe800080
+DBTR16_A: .long 0xfe800084
+DBTR17_A: .long 0xfe800088
+DBTR18_A: .long 0xfe80008c
+DBTR19_A: .long 0xfe800090
+DBRNK0_A: .long 0xfe800100
+DBPDCNT0_A: .long 0xfe800200
+DBPDCNT1_A: .long 0xfe800204
+DBPDCNT2_A: .long 0xfe800208
+DBPDCNT3_A: .long 0xfe80020c
+DBPDLCK_A: .long 0xfe800280
+DBPDRGA_A: .long 0xfe800290
+DBPDRGD_A: .long 0xfe8002a0
+DBADJ0_A: .long 0xfe8000c0
+DBADJ1_A: .long 0xfe8000c4
+DBADJ2_A: .long 0xfe8000c8
+DBRFCNF0_A: .long 0xfe8000e0
+DBRFCNF1_A: .long 0xfe8000e4
+DBRFCNF2_A: .long 0xfe8000e8
+DBCALCNF_A: .long 0xfe8000f4
+DBRFEN_A: .long 0xfe800014
+DBACEN_A: .long 0xfe800010
+DBWAIT_A: .long 0xfe80001c
+
+WAIT_OSC_TIME: .long 6000
+WAIT_30US: .long 13333
+
+DBCMD_RSTL_VAL: .long 0x20000000
+DBCMD_PDEN_VAL: .long 0x1000d73c
+DBCMD_WAIT_VAL: .long 0x0000d73c
+DBCMD_RSTH_VAL: .long 0x2100d73c
+DBCMD_PDXT_VAL: .long 0x110000c8
+DBCMD_MRS0_VAL: .long 0x28000930
+DBCMD_MRS1_VAL: .long 0x29000004
+DBCMD_MRS2_VAL: .long 0x2a000008
+DBCMD_MRS3_VAL: .long 0x2b000000
+DBCMD_ZQCL_VAL: .long 0x03000200
+DBCMD_REF_VAL: .long 0x0c000000
+DBCMD_SRXT_VAL: .long 0x19000000
+DBKIND_D: .long 0x00000007
+DBCONF_D: .long 0x0f030a01
+DBTR0_D: .long 0x00000007
+DBTR1_D: .long 0x00000006
+DBTR2_D: .long 0x00000000
+DBTR3_D: .long 0x00000007
+DBTR4_D: .long 0x00070007
+DBTR5_D: .long 0x0000001b
+DBTR6_D: .long 0x00000014
+DBTR7_D: .long 0x00000005
+DBTR8_D: .long 0x00000015
+DBTR9_D: .long 0x00000006
+DBTR10_D: .long 0x00000008
+DBTR11_D: .long 0x00000007
+DBTR12_D: .long 0x0000000e
+DBTR13_D: .long 0x00000056
+DBTR14_D: .long 0x00000006
+DBTR15_D: .long 0x00000004
+DBTR16_D: .long 0x00150002
+DBTR17_D: .long 0x000c0017
+DBTR18_D: .long 0x00000200
+DBTR19_D: .long 0x00000040
+DBRNK0_D: .long 0x00000001
+DBPDCNT0_D: .long 0x00000001
+DBPDCNT1_D: .long 0x00000001
+DBPDCNT2_D: .long 0x00000000
+DBPDCNT3_D: .long 0x00004010
+DBPDLCK_D: .long 0x0000a55a
+DBPDRGA_D: .long 0x00000028
+DBPDRGD_D: .long 0x00017100
+
+DBADJ0_D: .long 0x00000000
+DBADJ1_D: .long 0x00000000
+DBADJ2_D: .long 0x18061806
+DBRFCNF0_D: .long 0x000001ff
+DBRFCNF1_D: .long 0x08001000
+DBRFCNF2_D: .long 0x00000000
+DBCALCNF_D: .long 0x0000ffff
+DBRFEN_D: .long 0x00000001
+DBACEN_D: .long 0x00000001
+
+ .align 2
+exit_ddr:
+#if defined(CONFIG_SH_32BIT)
+ /*------- set PMB -------*/
+ write32 PASCR_A, PASCR_29BIT_D
+ write32 MMUCR_A, MMUCR_D
+
+ /*****************************************************************
+ * ent virt phys v sz c wt
+ * 0 0xa0000000 0x00000000 1 128M 0 1
+ * 1 0xa8000000 0x48000000 1 128M 0 1
+ * 5 0x88000000 0x48000000 1 128M 1 1
+ */
+ write32 PMB_ADDR_SPIBOOT_A, PMB_ADDR_SPIBOOT_D
+ write32 PMB_DATA_SPIBOOT_A, PMB_DATA_SPIBOOT_D
+ write32 PMB_ADDR_DDR_C1_A, PMB_ADDR_DDR_C1_D
+ write32 PMB_DATA_DDR_C1_A, PMB_DATA_DDR_C1_D
+ write32 PMB_ADDR_DDR_N1_A, PMB_ADDR_DDR_N1_D
+ write32 PMB_DATA_DDR_N1_A, PMB_DATA_DDR_N1_D
+
+ write32 PMB_ADDR_ENTRY2, PMB_ADDR_NOT_USE_D
+ write32 PMB_ADDR_ENTRY3, PMB_ADDR_NOT_USE_D
+ write32 PMB_ADDR_ENTRY4, PMB_ADDR_NOT_USE_D
+ write32 PMB_ADDR_ENTRY6, PMB_ADDR_NOT_USE_D
+ write32 PMB_ADDR_ENTRY7, PMB_ADDR_NOT_USE_D
+ write32 PMB_ADDR_ENTRY8, PMB_ADDR_NOT_USE_D
+ write32 PMB_ADDR_ENTRY9, PMB_ADDR_NOT_USE_D
+ write32 PMB_ADDR_ENTRY10, PMB_ADDR_NOT_USE_D
+ write32 PMB_ADDR_ENTRY11, PMB_ADDR_NOT_USE_D
+ write32 PMB_ADDR_ENTRY12, PMB_ADDR_NOT_USE_D
+ write32 PMB_ADDR_ENTRY13, PMB_ADDR_NOT_USE_D
+ write32 PMB_ADDR_ENTRY14, PMB_ADDR_NOT_USE_D
+ write32 PMB_ADDR_ENTRY15, PMB_ADDR_NOT_USE_D
+
+ write32 PASCR_A, PASCR_INIT
+ mov.l DUMMY_ADDR, r0
+ icbi @r0
+#endif /* if defined(CONFIG_SH_32BIT) */
+
+exit_pmb:
+ /* CPU is running on ILRAM? */
+ mov r14, r0
+ tst #1, r0
+ bt 1f
+
+ mov.l _stack_ilram, r15
+ mov.l _spiboot_main, r0
+100: bsrf r0
+ nop
+
+ .align 2
+_spiboot_main: .long (spiboot_main - (100b + 4))
+_stack_ilram: .long 0xe5204000
+
+1:
+ write32 CCR_A, CCR_D
+
+ rts
+ nop
+
+ .align 2
+
+#if defined(CONFIG_SH_32BIT)
+/*------- set PMB -------*/
+PMB_ADDR_SPIBOOT_A: .long PMB_ADDR_BASE(0)
+PMB_ADDR_DDR_N1_A: .long PMB_ADDR_BASE(1)
+PMB_ADDR_DDR_C1_A: .long PMB_ADDR_BASE(5)
+PMB_ADDR_ENTRY2: .long PMB_ADDR_BASE(2)
+PMB_ADDR_ENTRY3: .long PMB_ADDR_BASE(3)
+PMB_ADDR_ENTRY4: .long PMB_ADDR_BASE(4)
+PMB_ADDR_ENTRY6: .long PMB_ADDR_BASE(6)
+PMB_ADDR_ENTRY7: .long PMB_ADDR_BASE(7)
+PMB_ADDR_ENTRY8: .long PMB_ADDR_BASE(8)
+PMB_ADDR_ENTRY9: .long PMB_ADDR_BASE(9)
+PMB_ADDR_ENTRY10: .long PMB_ADDR_BASE(10)
+PMB_ADDR_ENTRY11: .long PMB_ADDR_BASE(11)
+PMB_ADDR_ENTRY12: .long PMB_ADDR_BASE(12)
+PMB_ADDR_ENTRY13: .long PMB_ADDR_BASE(13)
+PMB_ADDR_ENTRY14: .long PMB_ADDR_BASE(14)
+PMB_ADDR_ENTRY15: .long PMB_ADDR_BASE(15)
+
+PMB_ADDR_SPIBOOT_D: .long mk_pmb_addr_val(0xa0)
+PMB_ADDR_DDR_C1_D: .long mk_pmb_addr_val(0x88)
+PMB_ADDR_DDR_N1_D: .long mk_pmb_addr_val(0xa8)
+PMB_ADDR_NOT_USE_D: .long 0x00000000
+
+PMB_DATA_SPIBOOT_A: .long PMB_DATA_BASE(0)
+PMB_DATA_DDR_N1_A: .long PMB_DATA_BASE(1)
+PMB_DATA_DDR_C1_A: .long PMB_DATA_BASE(5)
+
+/* ppn ub v s1 s0 c wt */
+PMB_DATA_SPIBOOT_D: .long mk_pmb_data_val(0x00, 0, 1, 1, 0, 0, 1)
+PMB_DATA_DDR_C1_D: .long mk_pmb_data_val(0x48, 0, 1, 1, 0, 1, 1)
+PMB_DATA_DDR_N1_D: .long mk_pmb_data_val(0x48, 1, 1, 1, 0, 0, 1)
+
+PASCR_A: .long 0xff000070
+DUMMY_ADDR: .long 0xa0000000
+PASCR_29BIT_D: .long 0x00000000
+PASCR_INIT: .long 0x80000080
+MMUCR_A: .long 0xff000010
+MMUCR_D: .long 0x00000004 /* clear ITLB */
+#endif /* CONFIG_SH_32BIT */
+
+CCR_A: .long CCR
+CCR_D: .long CCR_CACHE_INIT
--- /dev/null
+/*
+ * Copyright (C) 2012 Renesas Solutions Corp.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <malloc.h>
+#include <asm/processor.h>
+#include <asm/io.h>
+#include <asm/mmc.h>
+#include <spi_flash.h>
+
+int checkboard(void)
+{
+ puts("BOARD: SH7752 evaluation board (R0P7752C00000RZ)\n");
+
+ return 0;
+}
+
+static void init_gpio(void)
+{
+ struct gpio_regs *gpio = GPIO_BASE;
+ struct sermux_regs *sermux = SERMUX_BASE;
+
+ /* GPIO */
+ writew(0x0000, &gpio->pacr); /* GETHER */
+ writew(0x0001, &gpio->pbcr); /* INTC */
+ writew(0x0000, &gpio->pccr); /* PWMU, INTC */
+ writew(0xeaff, &gpio->pecr); /* GPIO */
+ writew(0x0000, &gpio->pfcr); /* WDT */
+ writew(0x0000, &gpio->phcr); /* SPI1 */
+ writew(0x0000, &gpio->picr); /* SDHI */
+ writew(0x0003, &gpio->pkcr); /* SerMux */
+ writew(0x0000, &gpio->plcr); /* SerMux */
+ writew(0x0000, &gpio->pmcr); /* RIIC */
+ writew(0x0000, &gpio->pncr); /* USB, SGPIO */
+ writew(0x0000, &gpio->pocr); /* SGPIO */
+ writew(0xd555, &gpio->pqcr); /* GPIO */
+ writew(0x0000, &gpio->prcr); /* RIIC */
+ writew(0x0000, &gpio->pscr); /* RIIC */
+ writeb(0x00, &gpio->pudr);
+ writew(0x5555, &gpio->pucr); /* Debug LED */
+ writew(0x0000, &gpio->pvcr); /* RSPI */
+ writew(0x0000, &gpio->pwcr); /* EVC */
+ writew(0x0000, &gpio->pxcr); /* LBSC */
+ writew(0x0000, &gpio->pycr); /* LBSC */
+ writew(0x0000, &gpio->pzcr); /* eMMC */
+ writew(0xfe00, &gpio->psel0);
+ writew(0xff00, &gpio->psel3);
+ writew(0x771f, &gpio->psel4);
+ writew(0x00ff, &gpio->psel6);
+ writew(0xfc00, &gpio->psel7);
+
+ writeb(0x10, &sermux->smr0); /* SMR0: SerMux mode 0 */
+}
+
+static void init_usb_phy(void)
+{
+ struct usb_common_regs *common0 = USB0_COMMON_BASE;
+ struct usb_common_regs *common1 = USB1_COMMON_BASE;
+ struct usb0_phy_regs *phy = USB0_PHY_BASE;
+ struct usb1_port_regs *port = USB1_PORT_BASE;
+ struct usb1_alignment_regs *align = USB1_ALIGNMENT_BASE;
+
+ writew(0x0100, &phy->reset); /* set reset */
+ /* port0 = USB0, port1 = USB1 */
+ writew(0x0002, &phy->portsel);
+ writel(0x0001, &port->port1sel); /* port1 = Host */
+ writew(0x0111, &phy->reset); /* clear reset */
+
+ writew(0x4000, &common0->suspmode);
+ writew(0x4000, &common1->suspmode);
+
+#if defined(__LITTLE_ENDIAN)
+ writel(0x00000000, &align->ehcidatac);
+ writel(0x00000000, &align->ohcidatac);
+#endif
+}
+
+static void init_gether_mdio(void)
+{
+ struct gpio_regs *gpio = GPIO_BASE;
+
+ writew(readw(&gpio->pgcr) | 0x0004, &gpio->pgcr);
+ writeb(readb(&gpio->pgdr) | 0x02, &gpio->pgdr); /* Use ET0-MDIO */
+}
+
+static void set_mac_to_sh_giga_eth_register(int channel, char *mac_string)
+{
+ struct ether_mac_regs *ether;
+ unsigned char mac[6];
+ unsigned long val;
+
+ eth_parse_enetaddr(mac_string, mac);
+
+ if (!channel)
+ ether = GETHER0_MAC_BASE;
+ else
+ ether = GETHER1_MAC_BASE;
+
+ val = (mac[0] << 24) | (mac[1] << 16) | (mac[2] << 8) | mac[3];
+ writel(val, ðer->mahr);
+ val = (mac[4] << 8) | mac[5];
+ writel(val, ðer->malr);
+}
+
+/*****************************************************************
+ * This PMB must be set on this timing. The lowlevel_init is run on
+ * Area 0(phys 0x00000000), so we have to map it.
+ *
+ * The new PMB table is following:
+ * ent virt phys v sz c wt
+ * 0 0xa0000000 0x40000000 1 128M 0 1
+ * 1 0xa8000000 0x48000000 1 128M 0 1
+ * 2 0xb0000000 0x50000000 1 128M 0 1
+ * 3 0xb8000000 0x58000000 1 128M 0 1
+ * 4 0x80000000 0x40000000 1 128M 1 1
+ * 5 0x88000000 0x48000000 1 128M 1 1
+ * 6 0x90000000 0x50000000 1 128M 1 1
+ * 7 0x98000000 0x58000000 1 128M 1 1
+ */
+static void set_pmb_on_board_init(void)
+{
+ struct mmu_regs *mmu = MMU_BASE;
+
+ /* clear ITLB */
+ writel(0x00000004, &mmu->mmucr);
+
+ /* delete PMB for SPIBOOT */
+ writel(0, PMB_ADDR_BASE(0));
+ writel(0, PMB_DATA_BASE(0));
+
+ /* add PMB for SDRAM(0x40000000 - 0x47ffffff) */
+ /* ppn ub v s1 s0 c wt */
+ writel(mk_pmb_addr_val(0xa0), PMB_ADDR_BASE(0));
+ writel(mk_pmb_data_val(0x40, 1, 1, 1, 0, 0, 1), PMB_DATA_BASE(0));
+ writel(mk_pmb_addr_val(0xb0), PMB_ADDR_BASE(2));
+ writel(mk_pmb_data_val(0x50, 1, 1, 1, 0, 0, 1), PMB_DATA_BASE(2));
+ writel(mk_pmb_addr_val(0xb8), PMB_ADDR_BASE(3));
+ writel(mk_pmb_data_val(0x58, 1, 1, 1, 0, 0, 1), PMB_DATA_BASE(3));
+ writel(mk_pmb_addr_val(0x80), PMB_ADDR_BASE(4));
+ writel(mk_pmb_data_val(0x40, 0, 1, 1, 0, 1, 1), PMB_DATA_BASE(4));
+ writel(mk_pmb_addr_val(0x90), PMB_ADDR_BASE(6));
+ writel(mk_pmb_data_val(0x50, 0, 1, 1, 0, 1, 1), PMB_DATA_BASE(6));
+ writel(mk_pmb_addr_val(0x98), PMB_ADDR_BASE(7));
+ writel(mk_pmb_data_val(0x58, 0, 1, 1, 0, 1, 1), PMB_DATA_BASE(7));
+}
+
+int board_init(void)
+{
+ init_gpio();
+ set_pmb_on_board_init();
+
+ init_usb_phy();
+ init_gether_mdio();
+
+ return 0;
+}
+
+int dram_init(void)
+{
+ DECLARE_GLOBAL_DATA_PTR;
+
+ gd->bd->bi_memstart = CONFIG_SYS_SDRAM_BASE;
+ gd->bd->bi_memsize = CONFIG_SYS_SDRAM_SIZE;
+ printf("DRAM: %dMB\n", CONFIG_SYS_SDRAM_SIZE / (1024 * 1024));
+
+ return 0;
+}
+
+int board_mmc_init(bd_t *bis)
+{
+ struct gpio_regs *gpio = GPIO_BASE;
+
+ writew(readw(&gpio->pgcr) | 0x0040, &gpio->pgcr);
+ writeb(readb(&gpio->pgdr) & ~0x08, &gpio->pgdr); /* Reset */
+ udelay(1);
+ writeb(readb(&gpio->pgdr) | 0x08, &gpio->pgdr); /* Release reset */
+ udelay(200);
+
+ return mmcif_mmc_init();
+}
+
+static int get_sh_eth_mac_raw(unsigned char *buf, int size)
+{
+ struct spi_flash *spi;
+ int ret;
+
+ spi = spi_flash_probe(0, 0, 1000000, SPI_MODE_3);
+ if (spi == NULL) {
+ printf("%s: spi_flash probe failed.\n", __func__);
+ return 1;
+ }
+
+ ret = spi_flash_read(spi, SH7752EVB_ETHERNET_MAC_BASE, size, buf);
+ if (ret) {
+ printf("%s: spi_flash read failed.\n", __func__);
+ spi_flash_free(spi);
+ return 1;
+ }
+ spi_flash_free(spi);
+
+ return 0;
+}
+
+static int get_sh_eth_mac(int channel, char *mac_string, unsigned char *buf)
+{
+ memcpy(mac_string, &buf[channel * (SH7752EVB_ETHERNET_MAC_SIZE + 1)],
+ SH7752EVB_ETHERNET_MAC_SIZE);
+ mac_string[SH7752EVB_ETHERNET_MAC_SIZE] = 0x00; /* terminate */
+
+ return 0;
+}
+
+static void init_ethernet_mac(void)
+{
+ char mac_string[64];
+ char env_string[64];
+ int i;
+ unsigned char *buf;
+
+ buf = malloc(256);
+ if (!buf) {
+ printf("%s: malloc failed.\n", __func__);
+ return;
+ }
+ get_sh_eth_mac_raw(buf, 256);
+
+ /* Gigabit Ethernet */
+ for (i = 0; i < SH7752EVB_ETHERNET_NUM_CH; i++) {
+ get_sh_eth_mac(i, mac_string, buf);
+ if (i == 0)
+ setenv("ethaddr", mac_string);
+ else {
+ sprintf(env_string, "eth%daddr", i);
+ setenv(env_string, mac_string);
+ }
+ set_mac_to_sh_giga_eth_register(i, mac_string);
+ }
+
+ free(buf);
+}
+
+int board_late_init(void)
+{
+ init_ethernet_mac();
+
+ return 0;
+}
+
+int do_write_mac(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+{
+ int i, ret;
+ char mac_string[256];
+ struct spi_flash *spi;
+ unsigned char *buf;
+
+ if (argc != 3) {
+ buf = malloc(256);
+ if (!buf) {
+ printf("%s: malloc failed.\n", __func__);
+ return 1;
+ }
+
+ get_sh_eth_mac_raw(buf, 256);
+
+ /* print current MAC address */
+ for (i = 0; i < SH7752EVB_ETHERNET_NUM_CH; i++) {
+ get_sh_eth_mac(i, mac_string, buf);
+ printf("GETHERC ch%d = %s\n", i, mac_string);
+ }
+ free(buf);
+ return 0;
+ }
+
+ /* new setting */
+ memset(mac_string, 0xff, sizeof(mac_string));
+ sprintf(mac_string, "%s\t%s",
+ argv[1], argv[2]);
+
+ /* write MAC data to SPI rom */
+ spi = spi_flash_probe(0, 0, 1000000, SPI_MODE_3);
+ if (!spi) {
+ printf("%s: spi_flash probe failed.\n", __func__);
+ return 1;
+ }
+
+ ret = spi_flash_erase(spi, SH7752EVB_ETHERNET_MAC_BASE_SPI,
+ SH7752EVB_SPI_SECTOR_SIZE);
+ if (ret) {
+ printf("%s: spi_flash erase failed.\n", __func__);
+ return 1;
+ }
+
+ ret = spi_flash_write(spi, SH7752EVB_ETHERNET_MAC_BASE_SPI,
+ sizeof(mac_string), mac_string);
+ if (ret) {
+ printf("%s: spi_flash write failed.\n", __func__);
+ spi_flash_free(spi);
+ return 1;
+ }
+ spi_flash_free(spi);
+
+ puts("The writing of the MAC address to SPI ROM was completed.\n");
+
+ return 0;
+}
+
+U_BOOT_CMD(
+ write_mac, 3, 1, do_write_mac,
+ "write MAC address for GETHERC",
+ "[GETHERC ch0] [GETHERC ch1]\n"
+);
--- /dev/null
+/*
+ * Copyright (C) 2012 Renesas Solutions Corp.
+ *
+ * This file is subject to the terms and conditions of the GNU Lesser
+ * General Public License. See the file "COPYING.LIB" in the main
+ * directory of this archive for more details.
+ */
+
+#include <common.h>
+
+#define CONFIG_RAM_BOOT_PHYS CONFIG_SYS_TEXT_BASE
+#define CONFIG_SPI_ADDR 0x00000000
+#define CONFIG_SPI_LENGTH CONFIG_SYS_MONITOR_LEN
+#define CONFIG_RAM_BOOT CONFIG_SYS_TEXT_BASE
+
+#define SPIWDMADR 0xFE001018
+#define SPIWDMCNTR 0xFE001020
+#define SPIDMCOR 0xFE001028
+#define SPIDMINTSR 0xFE001188
+#define SPIDMINTMR 0xFE001190
+
+#define SPIDMINTSR_DMEND 0x00000004
+
+#define TBR 0xFE002000
+#define RBR 0xFE002000
+
+#define CR1 0xFE002008
+#define CR2 0xFE002010
+#define CR3 0xFE002018
+#define CR4 0xFE002020
+
+/* CR1 */
+#define SPI_TBE 0x80
+#define SPI_TBF 0x40
+#define SPI_RBE 0x20
+#define SPI_RBF 0x10
+#define SPI_PFONRD 0x08
+#define SPI_SSDB 0x04
+#define SPI_SSD 0x02
+#define SPI_SSA 0x01
+
+/* CR2 */
+#define SPI_RSTF 0x80
+#define SPI_LOOPBK 0x40
+#define SPI_CPOL 0x20
+#define SPI_CPHA 0x10
+#define SPI_L1M0 0x08
+
+/* CR4 */
+#define SPI_TBEI 0x80
+#define SPI_TBFI 0x40
+#define SPI_RBEI 0x20
+#define SPI_RBFI 0x10
+#define SPI_SpiS0 0x02
+#define SPI_SSS 0x01
+
+#define spi_write(val, addr) (*(volatile unsigned long *)(addr)) = val
+#define spi_read(addr) (*(volatile unsigned long *)(addr))
+
+/* M25P80 */
+#define M25_READ 0x03
+
+#define __uses_spiboot2 __attribute__((section(".spiboot2.text")))
+static void __uses_spiboot2 spi_reset(void)
+{
+ int timeout = 0x00100000;
+
+ /* Make sure the last transaction is finalized */
+ spi_write(0x00, CR3);
+ spi_write(0x02, CR1);
+ while (!(spi_read(CR4) & SPI_SpiS0)) {
+ if (timeout-- < 0)
+ break;
+ }
+ spi_write(0x00, CR1);
+
+ spi_write(spi_read(CR2) | SPI_RSTF, CR2); /* fifo reset */
+ spi_write(spi_read(CR2) & ~SPI_RSTF, CR2);
+
+ spi_write(0, SPIDMCOR);
+}
+
+static void __uses_spiboot2 spi_read_flash(void *buf, unsigned long addr,
+ unsigned long len)
+{
+ spi_write(M25_READ, TBR);
+ spi_write((addr >> 16) & 0xFF, TBR);
+ spi_write((addr >> 8) & 0xFF, TBR);
+ spi_write(addr & 0xFF, TBR);
+
+ spi_write(SPIDMINTSR_DMEND, SPIDMINTSR);
+ spi_write((unsigned long)buf, SPIWDMADR);
+ spi_write(len & 0xFFFFFFE0, SPIWDMCNTR);
+ spi_write(1, SPIDMCOR);
+
+ spi_write(0xff, CR3);
+ spi_write(spi_read(CR1) | SPI_SSDB, CR1);
+ spi_write(spi_read(CR1) | SPI_SSA, CR1);
+
+ while (!(spi_read(SPIDMINTSR) & SPIDMINTSR_DMEND))
+ ;
+
+ /* Nagate SP0-SS0 */
+ spi_write(0, CR1);
+}
+
+void __uses_spiboot2 spiboot_main(void)
+{
+ void (*_start)(void) = (void *)CONFIG_SYS_TEXT_BASE;
+
+ spi_reset();
+ spi_read_flash((void *)CONFIG_RAM_BOOT_PHYS, CONFIG_SPI_ADDR,
+ CONFIG_SPI_LENGTH);
+
+ _start();
+}
--- /dev/null
+/*
+ * Copyright (C) 2007
+ * Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+ *
+ * Copyright (C) 2012
+ * Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_FORMAT("elf32-sh-linux", "elf32-sh-linux", "elf32-sh-linux")
+OUTPUT_ARCH(sh)
+ENTRY(_start)
+
+SECTIONS
+{
+ /*
+ * entry and reloct_dst will be provided via ldflags
+ */
+ . = .;
+
+ PROVIDE (_ftext = .);
+ PROVIDE (_fcode = .);
+ PROVIDE (_start = .);
+
+ .text :
+ {
+ KEEP(arch/sh/cpu/sh4/start.o (.text))
+ *(.spiboot1.text)
+ *(.spiboot2.text)
+ . = ALIGN(8192);
+ common/env_embedded.o (.ppcenv)
+ . = ALIGN(8192);
+ common/env_embedded.o (.ppcenvr)
+ . = ALIGN(8192);
+ *(.text)
+ . = ALIGN(4);
+ } =0xFF
+ PROVIDE (_ecode = .);
+ .rodata :
+ {
+ *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*)))
+ . = ALIGN(4);
+ }
+ PROVIDE (_etext = .);
+
+
+ PROVIDE (_fdata = .);
+ .data :
+ {
+ *(.data)
+ . = ALIGN(4);
+ }
+ PROVIDE (_edata = .);
+
+ PROVIDE (_fgot = .);
+ .got :
+ {
+ *(.got)
+ . = ALIGN(4);
+ }
+ PROVIDE (_egot = .);
+
+ .u_boot_list : {
+ #include <u-boot.lst>
+ }
+
+ PROVIDE (reloc_dst_end = .);
+ /* _reloc_dst_end = .; */
+
+ PROVIDE (bss_start = .);
+ PROVIDE (__bss_start = .);
+ .bss (NOLOAD) :
+ {
+ *(.bss)
+ . = ALIGN(4);
+ }
+ PROVIDE (bss_end = .);
+
+ PROVIDE (__bss_end__ = .);
+}
M5235EVB_Flash32 m68k mcf523x m5235evb freescale - M5235EVB:NORFLASH_PS32BIT,SYS_TEXT_BASE=0xFFC00000
cobra5272 m68k mcf52x2 cobra5272 -
idmr m68k mcf52x2
-eb_cpu5282 m68k mcf52x2 eb_cpu5282 BuS - eb_cpu5282:SYS_TEXT_BASE=0xFF000000
-eb_cpu5282_internal m68k mcf52x2 eb_cpu5282 BuS - eb_cpu5282:SYS_TEXT_BASE=0xF0000000
+eb_cpu5282 m68k mcf52x2 eb_cpu5282 BuS - eb_cpu5282:SYS_TEXT_BASE=0xFF000000,SYS_MONITOR_BASE=0xFF000400
+eb_cpu5282_internal m68k mcf52x2 eb_cpu5282 BuS - eb_cpu5282:SYS_TEXT_BASE=0xF0000000,SYS_MONITOR_BASE=0xF0000418
TASREG m68k mcf52x2 tasreg esd
M5208EVBE m68k mcf52x2 m5208evbe freescale
M5249EVB m68k mcf52x2 m5249evb freescale
MigoR sh sh4 MigoR renesas -
r2dplus sh sh4 r2dplus renesas -
r7780mp sh sh4 r7780mp renesas -
+sh7752evb sh sh4 sh7752evb renesas -
sh7757lcr sh sh4 sh7757lcr renesas -
sh7763rdp sh sh4 sh7763rdp renesas -
sh7785lcr sh sh4 sh7785lcr renesas -
int w;
/* Validate arguments */
- if ((argc != 5) || (strlen(argv[3]) != 1))
+ if (argc != 5 && argc != 3)
+ return CMD_RET_USAGE;
+ if (argc == 5 && strlen(argv[3]) != 1)
return CMD_RET_USAGE;
w = cmd_get_data_size(argv[0], 4);
a = get_arg(argv[2], w);
+
+ if (argc == 3) {
+ sprintf(buf, "%lx", a);
+ setenv(argv[1], buf);
+
+ return 0;
+ }
+
b = get_arg(argv[4], w);
switch (argv[3][0]) {
U_BOOT_CMD(
setexpr, 5, 0, do_setexpr,
"set environment variable as the result of eval expression",
- "[.b, .w, .l] name value1 <op> value2\n"
+ "[.b, .w, .l] name [*]value1 <op> [*]value2\n"
" - set environment variable 'name' to the result of the evaluated\n"
" express specified by <op>. <op> can be &, |, ^, +, -, *, /, %\n"
- " size argument is only meaningful if value1 and/or value2 are memory addresses"
+ " size argument is only meaningful if value1 and/or value2 are\n"
+ " memory addresses (*)\n"
+ "setexpr[.b, .w, .l] name *value\n"
+ " - load a memory address into a variable"
);
* Licensed under the GPL-2 or later.
*/
+#include <div64.h>
#include <common.h>
#include <malloc.h>
#include <spi_flash.h>
return 1;
}
+/**
+ * This function takes a byte length and a delta unit of time to compute the
+ * approximate bytes per second
+ *
+ * @param len amount of bytes currently processed
+ * @param start_ms start time of processing in ms
+ * @return bytes per second if OK, 0 on error
+ */
+static ulong bytes_per_second(unsigned int len, ulong start_ms)
+{
+ /* less accurate but avoids overflow */
+ if (len >= ((unsigned int) -1) / 1024)
+ return len / (max(get_timer(start_ms) / 1024, 1));
+ else
+ return 1024 * len / max(get_timer(start_ms), 1);
+}
+
static int do_spi_flash_probe(int argc, char * const argv[])
{
unsigned int bus = CONFIG_SF_DEFAULT_BUS;
const char *end = buf + len;
size_t todo; /* number of bytes to do in this pass */
size_t skipped = 0; /* statistics */
+ const ulong start_time = get_timer(0);
+ size_t scale = 1;
+ const char *start_buf = buf;
+ ulong delta;
+ if (end - buf >= 200)
+ scale = (end - buf) / 100;
cmp_buf = malloc(flash->sector_size);
if (cmp_buf) {
+ ulong last_update = get_timer(0);
+
for (; buf < end && !err_oper; buf += todo, offset += todo) {
todo = min(end - buf, flash->sector_size);
+ if (get_timer(last_update) > 100) {
+ printf(" \rUpdating, %zu%% %lu B/s",
+ 100 - (end - buf) / scale,
+ bytes_per_second(buf - start_buf,
+ start_time));
+ last_update = get_timer(0);
+ }
err_oper = spi_flash_update_block(flash, offset, todo,
buf, cmp_buf, &skipped);
}
err_oper = "malloc";
}
free(cmp_buf);
+ putc('\r');
if (err_oper) {
printf("SPI flash failed in %s step\n", err_oper);
return 1;
}
- printf("%zu bytes written, %zu bytes skipped\n", len - skipped,
- skipped);
+
+ delta = get_timer(start_time);
+ printf("%zu bytes written, %zu bytes skipped", len - skipped,
+ skipped);
+ printf(" in %ld.%lds, speed %ld B/s\n",
+ delta / 1000, delta % 1000, bytes_per_second(len, start_time));
return 0;
}
return 0;
}
+#ifdef CONFIG_CMD_SF_TEST
+enum {
+ STAGE_ERASE,
+ STAGE_CHECK,
+ STAGE_WRITE,
+ STAGE_READ,
+
+ STAGE_COUNT,
+};
+
+static char *stage_name[STAGE_COUNT] = {
+ "erase",
+ "check",
+ "write",
+ "read",
+};
+
+struct test_info {
+ int stage;
+ int bytes;
+ unsigned base_ms;
+ unsigned time_ms[STAGE_COUNT];
+};
+
+static void show_time(struct test_info *test, int stage)
+{
+ uint64_t speed; /* KiB/s */
+ int bps; /* Bits per second */
+
+ speed = (long long)test->bytes * 1000;
+ do_div(speed, test->time_ms[stage] * 1024);
+ bps = speed * 8;
+
+ printf("%d %s: %d ticks, %d KiB/s %d.%03d Mbps\n", stage,
+ stage_name[stage], test->time_ms[stage],
+ (int)speed, bps / 1000, bps % 1000);
+}
+
+static void spi_test_next_stage(struct test_info *test)
+{
+ test->time_ms[test->stage] = get_timer(test->base_ms);
+ show_time(test, test->stage);
+ test->base_ms = get_timer(0);
+ test->stage++;
+}
+
+/**
+ * Run a test on the SPI flash
+ *
+ * @param flash SPI flash to use
+ * @param buf Source buffer for data to write
+ * @param len Size of data to read/write
+ * @param offset Offset within flash to check
+ * @param vbuf Verification buffer
+ * @return 0 if ok, -1 on error
+ */
+static int spi_flash_test(struct spi_flash *flash, char *buf, ulong len,
+ ulong offset, char *vbuf)
+{
+ struct test_info test;
+ int i;
+
+ printf("SPI flash test:\n");
+ memset(&test, '\0', sizeof(test));
+ test.base_ms = get_timer(0);
+ test.bytes = len;
+ if (spi_flash_erase(flash, offset, len)) {
+ printf("Erase failed\n");
+ return -1;
+ }
+ spi_test_next_stage(&test);
+
+ if (spi_flash_read(flash, offset, len, vbuf)) {
+ printf("Check read failed\n");
+ return -1;
+ }
+ for (i = 0; i < len; i++) {
+ if (vbuf[i] != 0xff) {
+ printf("Check failed at %d\n", i);
+ print_buffer(i, vbuf + i, 1, min(len - i, 0x40), 0);
+ return -1;
+ }
+ }
+ spi_test_next_stage(&test);
+
+ if (spi_flash_write(flash, offset, len, buf)) {
+ printf("Write failed\n");
+ return -1;
+ }
+ memset(vbuf, '\0', len);
+ spi_test_next_stage(&test);
+
+ if (spi_flash_read(flash, offset, len, vbuf)) {
+ printf("Read failed\n");
+ return -1;
+ }
+ spi_test_next_stage(&test);
+
+ for (i = 0; i < len; i++) {
+ if (buf[i] != vbuf[i]) {
+ printf("Verify failed at %d, good data:\n", i);
+ print_buffer(i, buf + i, 1, min(len - i, 0x40), 0);
+ printf("Bad data:\n");
+ print_buffer(i, vbuf + i, 1, min(len - i, 0x40), 0);
+ return -1;
+ }
+ }
+ printf("Test passed\n");
+ for (i = 0; i < STAGE_COUNT; i++)
+ show_time(&test, i);
+
+ return 0;
+}
+
+static int do_spi_flash_test(int argc, char * const argv[])
+{
+ unsigned long offset;
+ unsigned long len;
+ char *buf = (char *)CONFIG_SYS_TEXT_BASE;
+ char *endp;
+ char *vbuf;
+ int ret;
+
+ offset = simple_strtoul(argv[1], &endp, 16);
+ if (*argv[1] == 0 || *endp != 0)
+ return -1;
+ len = simple_strtoul(argv[2], &endp, 16);
+ if (*argv[2] == 0 || *endp != 0)
+ return -1;
+
+ vbuf = malloc(len);
+ if (!vbuf) {
+ printf("Cannot allocate memory\n");
+ return 1;
+ }
+ buf = malloc(len);
+ if (!buf) {
+ free(vbuf);
+ printf("Cannot allocate memory\n");
+ return 1;
+ }
+
+ memcpy(buf, (char *)CONFIG_SYS_TEXT_BASE, len);
+ ret = spi_flash_test(flash, buf, len, offset, vbuf);
+ free(vbuf);
+ free(buf);
+ if (ret) {
+ printf("Test failed\n");
+ return 1;
+ }
+
+ return 0;
+}
+#endif /* CONFIG_CMD_SF_TEST */
+
static int do_spi_flash(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
const char *cmd;
ret = do_spi_flash_read_write(argc, argv);
else if (strcmp(cmd, "erase") == 0)
ret = do_spi_flash_erase(argc, argv);
+#ifdef CONFIG_CMD_SF_TEST
+ else if (!strcmp(cmd, "test"))
+ ret = do_spi_flash_test(argc, argv);
+#endif
else
ret = -1;
return CMD_RET_USAGE;
}
+#ifdef CONFIG_CMD_SF_TEST
+#define SF_TEST_HELP "\nsf test offset len " \
+ "- run a very basic destructive test"
+#else
+#define SF_TEST_HELP
+#endif
+
U_BOOT_CMD(
sf, 5, 1, do_spi_flash,
"SPI flash sub-system",
" `+len' round up `len' to block size\n"
"sf update addr offset len - erase and write `len' bytes from memory\n"
" at `addr' to flash at `offset'"
+ SF_TEST_HELP
);
#include <command.h>
#include <version.h>
#include <linux/compiler.h>
+#ifdef CONFIG_SYS_COREBOOT
+#include <asm/arch/sysinfo.h>
+#endif
const char __weak version_string[] = U_BOOT_VERSION_STRING;
#ifdef LD_VERSION_STRING
puts(LD_VERSION_STRING "\n");
#endif
-
+#ifdef CONFIG_SYS_COREBOOT
+ printf("coreboot-%s (%s)\n", lib_sysinfo.version, lib_sysinfo.build);
+#endif
return 0;
}
return &usb_dev[dev_index - 1];
}
+/*
+ * Free the newly created device node.
+ * Called in error cases where configuring a newly attached
+ * device fails for some reason.
+ */
+void usb_free_device(void)
+{
+ dev_index--;
+ USB_PRINTF("Freeing device node: %d\n", dev_index);
+ memset(&usb_dev[dev_index], 0, sizeof(struct usb_device));
+ usb_dev[dev_index].devnum = -1;
+}
/*
* By the time we get here, the device has gotten a new device ID
/* Run it through the hoops (find a driver, etc) */
if (usb_new_device(usb)) {
/* Woops, disable the port */
+ usb_free_device();
+ dev->children[port] = NULL;
USB_HUB_PRINTF("hub: disabling port %d\n", port + 1);
usb_clear_port_feature(dev, port + 1, USB_PORT_FEAT_ENABLE);
}
for (i = 0; i < dev->maxchild; i++) {
ALLOC_CACHE_ALIGN_BUFFER(struct usb_port_status, portsts, 1);
unsigned short portstatus, portchange;
+ int ret;
+ ulong start = get_timer(0);
+
+ /*
+ * Wait for (whichever finishes first)
+ * - A maximum of 10 seconds
+ * This is a purely observational value driven by connecting
+ * a few broken pen drives and taking the max * 1.5 approach
+ * - connection_change and connection state to report same
+ * state
+ */
+ do {
+ ret = usb_get_port_status(dev, i + 1, portsts);
+ if (ret < 0) {
+ USB_HUB_PRINTF("get_port_status failed\n");
+ break;
+ }
+
+ portstatus = le16_to_cpu(portsts->wPortStatus);
+ portchange = le16_to_cpu(portsts->wPortChange);
+
+ if ((portchange & USB_PORT_STAT_C_CONNECTION) ==
+ (portstatus & USB_PORT_STAT_CONNECTION))
+ break;
+
+ mdelay(100);
+ } while (get_timer(start) < CONFIG_SYS_HZ * 10);
- if (usb_get_port_status(dev, i + 1, portsts) < 0) {
- USB_HUB_PRINTF("get_port_status failed\n");
+ if (ret < 0)
continue;
- }
- portstatus = le16_to_cpu(portsts->wPortStatus);
- portchange = le16_to_cpu(portsts->wPortChange);
USB_HUB_PRINTF("Port %d Status %X Change %X\n",
i + 1, portstatus, portchange);
return 0;
}
usb_request_sense(srb, ss);
+ /*
+ * Check the Key Code Qualifier, if it matches
+ * "Not Ready - medium not present"
+ * (the sense Key equals 0x2 and the ASC is 0x3a)
+ * return immediately as the medium being absent won't change
+ * unless there is a user action.
+ */
+ if ((srb->sense_buf[2] == 0x02) &&
+ (srb->sense_buf[12] == 0x3a))
+ return -1;
mdelay(100);
} while (retries--);
--- /dev/null
+========================================
+Renesas R0P7752C00000RZ board
+========================================
+
+This board specification:
+=========================
+
+The R0P7752C00000RZ(board config name:sh7752evb) has the following device:
+
+ - SH7752 (SH-4A)
+ - DDR3-SDRAM 512MB
+ - SPI ROM 8MB
+ - Gigabit Ethernet controllers
+ - eMMC 4GB
+
+
+Configuration for This board:
+=============================
+
+You can select the configuration as follows:
+
+ - make sh7752evb_config
+
+
+This board specific command:
+============================
+
+This board has the following its specific command:
+
+ - write_mac
+
+
+1. write_mac
+
+You can write MAC address to SPI ROM.
+
+ Usage 1) Write MAC address
+
+ write_mac [GETHERC ch0] [GETHERC ch1]
+
+ For example)
+ => write_mac 74:90:50:00:33:9e 74:90:50:00:33:9f
+ *) We have to input the command as a single line
+ (without carriage return)
+ *) We have to reset after input the command.
+
+ Usage 2) Show current data
+
+ write_mac
+
+ For example)
+ => write_mac
+ GETHERC ch0 = 74:90:50:00:33:9e
+ GETHERC ch1 = 74:90:50:00:33:9f
+
+
+Update SPI ROM:
+============================
+
+1. Copy u-boot image to RAM area.
+2. Probe SPI device.
+ => sf probe 0
+ SF: Detected MX25L6405D with page size 64KiB, total 8 MiB
+3. Erase SPI ROM.
+ => sf erase 0 80000
+4. Write u-boot image to SPI ROM.
+ => sf write 0x48000000 0 80000
Storage USB Commands:
- usb scan: scans the USB for storage devices.The USB must be
running for this command (usb start)
-- usb device [dev]: show or set current USB staorage device
+- usb device [dev]: show or set current USB storage device
- usb part [dev]: print partition table of one or all USB storage
devices
- usb read addr blk# cnt:
COBJS-$(CONFIG_NAND_OMAP_GPMC) += omap_gpmc.o
COBJS-$(CONFIG_NAND_PLAT) += nand_plat.o
+else # minimal SPL drivers
+
+COBJS-$(CONFIG_NAND_FSL_ELBC) += fsl_elbc_spl.o
+
endif # drivers
endif # nand
timing = IFC_FIR_OP_RBCD;
out_be32(&ifc->ifc_nand.nand_fir0,
- (IFC_FIR_OP_CMD0 << IFC_NAND_FIR0_OP0_SHIFT) |
+ (IFC_FIR_OP_CW0 << IFC_NAND_FIR0_OP0_SHIFT) |
(IFC_FIR_OP_UA << IFC_NAND_FIR0_OP1_SHIFT) |
(timing << IFC_NAND_FIR0_OP2_SHIFT));
out_be32(&ifc->ifc_nand.nand_fcr0,
/* READID */
out_be32(&ifc->ifc_nand.nand_fir0,
- (IFC_FIR_OP_CMD0 << IFC_NAND_FIR0_OP0_SHIFT) |
+ (IFC_FIR_OP_CW0 << IFC_NAND_FIR0_OP0_SHIFT) |
(IFC_FIR_OP_UA << IFC_NAND_FIR0_OP1_SHIFT) |
(IFC_FIR_OP_RB << IFC_NAND_FIR0_OP2_SHIFT));
out_be32(&ifc->ifc_nand.nand_fcr0,
#elif defined(CONFIG_H8S2678)
# define SCSCR_INIT(port) 0x30 /* TIE=0,RIE=0,TE=1,RE=1 */
# define H8300_SCI_DR(ch) (*(volatile char *)(P1DR + h8300_sci_pins[ch].port))
-#elif defined(CONFIG_CPU_SH7757)
+#elif defined(CONFIG_CPU_SH7757) || defined(CONFIG_CPU_SH7752)
# define SCSPTR0 0xfe4b0020
# define SCSPTR1 0xfe4b0020
# define SCSPTR2 0xfe4b0020
static struct usb_string g_dnl_string_defs[] = {
{ 0, manufacturer, },
{ 1, product, },
+ { } /* end of list */
};
static struct usb_gadget_strings g_dnl_string_tab = {
static int g_dnl_unbind(struct usb_composite_dev *cdev)
{
- debug("%s\n", __func__);
+ struct usb_gadget *gadget = cdev->gadget;
+
+ debug("%s: calling usb_gadget_disconnect for "
+ "controller '%s'\n", shortname, gadget->name);
+ usb_gadget_disconnect(gadget);
+
return 0;
}
device_desc.bcdDevice = __constant_cpu_to_le16(0x9999);
}
+ debug("%s: calling usb_gadget_connect for "
+ "controller '%s'\n", shortname, gadget->name);
+ usb_gadget_connect(gadget);
+
return 0;
error:
#include <asm/io.h>
#include <asm/arch/pxa.h>
-#include <usbdescriptors.h>
#include <linux/usb/ch9.h>
#include <linux/usb/gadget.h>
#include <usb/lin_gadget_compat.h>
#define CONFIG_DOS_PARTITION
/* USB */
-#define CONFIG_MUSB_UDC
#define CONFIG_USB_OMAP3
+#define CONFIG_USB_EHCI
+#define CONFIG_USB_EHCI_OMAP
+#define CONFIG_USB_ULPI
+#define CONFIG_USB_ULPI_VIEWPORT_OMAP
+#define CONFIG_USB_STORAGE
+#define CONFIG_MUSB_UDC
#define CONFIG_TWL4030_USB
+#define CONFIG_CMD_USB
/* USB device configuration */
#define CONFIG_USB_DEVICE
#define CONFIG_CMD_GPIO
#define CONFIG_CMD_IMI
#undef CONFIG_CMD_IMLS
+#define CONFIG_CMD_IO
#define CONFIG_CMD_IRQ
#define CONFIG_CMD_ITEST
#define CONFIG_CMD_LOADB
#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_SDRAM_BASE0
#define CONFIG_SYS_SDRAM_SIZE CONFIG_SYS_SDRAM_SIZE0
-/* If M5282 port is fully implemented the monitor base will be behind
- * the vector table. */
-#if (CONFIG_SYS_TEXT_BASE != CONFIG_SYS_INT_FLASH_BASE)
-#define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_TEXT_BASE + 0x400)
-#else
-#define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_TEXT_BASE + 0x418) /* 24 Byte for CFM-Config */
-#endif
-
#define CONFIG_SYS_MONITOR_LEN 0x20000
#define CONFIG_SYS_MALLOC_LEN (256 << 10)
#define CONFIG_SYS_BOOTPARAMS_LEN 64*1024
#define CONFIG_BOOTARGS "root=/dev/ram0 ro console=ttyS0,115200n8"
+#define CONFIG_SYS_CONSOLE_IS_IN_ENV
+#define CONFIG_USB_DEV_PULLUP_GPIO 33
+/* USB VBUS GPIO 3 */
+
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_PING
+
+#define CONFIG_BOOTDELAY 2
+#define CONFIG_BOOTCOMMAND \
+ "setenv downloaded 0 ; while test $downloaded -eq 0 ; do " \
+ "if bootp ; then setenv downloaded 1 ; fi ; done ; " \
+ "source :script ; " \
+ "bootm ; "
+
+#define CONFIG_USB_GADGET_PXA2XX
+#define CONFIG_USB_ETHER
+#define CONFIG_USB_ETH_SUBSET
+
+#define CONFIG_USBNET_DEV_ADDR "de:ad:be:ef:00:01"
+#define CONFIG_USBNET_HOST_ADDR "de:ad:be:ef:00:02"
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "stdin=serial\0" \
+ "stdout=serial\0" \
+ "stderr=serial\0"
+
#endif /* __CONFIG_H */
--- /dev/null
+/*
+ * Configuation settings for the sh7752evb board
+ *
+ * Copyright (C) 2012 Renesas Solutions Corp.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __SH7752EVB_H
+#define __SH7752EVB_H
+
+#undef DEBUG
+#define CONFIG_SH 1
+#define CONFIG_SH4A 1
+#define CONFIG_SH_32BIT 1
+#define CONFIG_CPU_SH7752 1
+#define CONFIG_SH7752EVB 1
+
+#define CONFIG_SYS_TEXT_BASE 0x5ff80000
+#define CONFIG_SYS_LDSCRIPT "board/renesas/sh7752evb/u-boot.lds"
+
+#define CONFIG_CMD_MEMORY
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_NFS
+#define CONFIG_CMD_DFL
+#define CONFIG_CMD_SDRAM
+#define CONFIG_CMD_SF
+#define CONFIG_CMD_RUN
+#define CONFIG_CMD_SAVEENV
+#define CONFIG_CMD_MD5SUM
+#define CONFIG_MD5
+#define CONFIG_CMD_LOADS
+#define CONFIG_CMD_MMC
+#define CONFIG_CMD_EXT2
+#define CONFIG_DOS_PARTITION
+#define CONFIG_MAC_PARTITION
+
+#define CONFIG_BAUDRATE 115200
+#define CONFIG_BOOTDELAY 3
+#define CONFIG_BOOTARGS "console=ttySC2,115200 root=/dev/nfs ip=dhcp"
+
+#define CONFIG_VERSION_VARIABLE
+#undef CONFIG_SHOW_BOOT_PROGRESS
+#define CONFIG_CMDLINE_EDITING
+#define CONFIG_AUTO_COMPLETE
+
+/* MEMORY */
+#define SH7752EVB_SDRAM_BASE (0x40000000)
+#define SH7752EVB_SDRAM_SIZE (512 * 1024 * 1024)
+
+#define CONFIG_SYS_LONGHELP
+#define CONFIG_SYS_PROMPT "=> "
+#define CONFIG_SYS_CBSIZE 256
+#define CONFIG_SYS_PBSIZE 256
+#define CONFIG_SYS_MAXARGS 16
+#define CONFIG_SYS_BARGSIZE 512
+#define CONFIG_SYS_BAUDRATE_TABLE { 115200 }
+
+/* SCIF */
+#define CONFIG_SCIF_CONSOLE 1
+#define CONFIG_CONS_SCIF2 1
+#undef CONFIG_SYS_CONSOLE_INFO_QUIET
+#undef CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE
+#undef CONFIG_SYS_CONSOLE_ENV_OVERWRITE
+
+#define CONFIG_SYS_MEMTEST_START (SH7752EVB_SDRAM_BASE)
+#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + \
+ 480 * 1024 * 1024)
+#undef CONFIG_SYS_ALT_MEMTEST
+#undef CONFIG_SYS_MEMTEST_SCRATCH
+#undef CONFIG_SYS_LOADS_BAUD_CHANGE
+
+#define CONFIG_SYS_SDRAM_BASE (SH7752EVB_SDRAM_BASE)
+#define CONFIG_SYS_SDRAM_SIZE (SH7752EVB_SDRAM_SIZE)
+#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + \
+ 128 * 1024 * 1024)
+
+#define CONFIG_SYS_MONITOR_BASE 0x00000000
+#define CONFIG_SYS_MONITOR_LEN (512 * 1024)
+#define CONFIG_SYS_MALLOC_LEN (4 * 1024 * 1024)
+#define CONFIG_SYS_BOOTMAPSZ (8 * 1024 * 1024)
+
+/* FLASH */
+#define CONFIG_SYS_NO_FLASH
+
+/* Ether */
+#define CONFIG_SH_ETHER 1
+#define CONFIG_SH_ETHER_USE_PORT 0
+#define CONFIG_SH_ETHER_PHY_ADDR 18
+#define CONFIG_SH_ETHER_CACHE_WRITEBACK 1
+#define CONFIG_SH_ETHER_USE_GETHER 1
+#define CONFIG_PHYLIB
+#define CONFIG_BITBANGMII
+#define CONFIG_BITBANGMII_MULTI
+#define CONFIG_SH_ETHER_PHY_MODE PHY_INTERFACE_MODE_RGMII
+#define CONFIG_PHY_VITESSE
+
+#define SH7752EVB_ETHERNET_MAC_BASE_SPI 0x00090000
+#define SH7752EVB_SPI_SECTOR_SIZE (64 * 1024)
+#define SH7752EVB_ETHERNET_MAC_BASE SH7752EVB_ETHERNET_MAC_BASE_SPI
+#define SH7752EVB_ETHERNET_MAC_SIZE 17
+#define SH7752EVB_ETHERNET_NUM_CH 2
+#define CONFIG_BOARD_LATE_INIT
+
+/* SPI */
+#define CONFIG_SH_SPI 1
+#define CONFIG_SH_SPI_BASE 0xfe002000
+#define CONFIG_SPI_FLASH
+#define CONFIG_SPI_FLASH_STMICRO 1
+#define CONFIG_SPI_FLASH_MACRONIX 1
+
+/* MMCIF */
+#define CONFIG_MMC 1
+#define CONFIG_GENERIC_MMC 1
+#define CONFIG_SH_MMCIF 1
+#define CONFIG_SH_MMCIF_ADDR 0xffcb0000
+#define CONFIG_SH_MMCIF_CLK 48000000
+
+/* ENV setting */
+#define CONFIG_ENV_IS_EMBEDDED
+#define CONFIG_ENV_IS_IN_SPI_FLASH
+#define CONFIG_ENV_SECT_SIZE (64 * 1024)
+#define CONFIG_ENV_ADDR (0x00080000)
+#define CONFIG_ENV_OFFSET (CONFIG_ENV_ADDR)
+#define CONFIG_ENV_OVERWRITE 1
+#define CONFIG_ENV_SIZE (CONFIG_ENV_SECT_SIZE)
+#define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SECT_SIZE)
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "netboot=bootp; bootm\0"
+
+/* Board Clock */
+#define CONFIG_SYS_CLK_FREQ 48000000
+#define CONFIG_SYS_TMU_CLK_DIV 4
+#define CONFIG_SYS_HZ 1000
+#endif /* __SH7752EVB_H */
* when associated through the ".callbacks" environment variable, the callback
* will be executed any time the variable is inserted, overwritten, or deleted.
*/
+#ifdef CONFIG_SPL_BUILD
+#define U_BOOT_ENV_CALLBACK(name, callback) \
+ static inline void _u_boot_env_noop_##name(void) \
+ { \
+ (void)callback; \
+ }
+#else
#define U_BOOT_ENV_CALLBACK(name, callback) \
ll_entry_declare(struct env_clbk_tbl, name, env_clbk, env_clbk) = \
{#name, callback}
+#endif
#endif /* __ENV_CALLBACK_H__ */
#define TWL4030_USB_PHY_CLK_CTRL 0xFE
#define TWL4030_USB_PHY_CLK_CTRL_STS 0xFF
+/* GPIO */
+#define TWL4030_GPIO_GPIODATAIN1 0x00
+#define TWL4030_GPIO_GPIODATAIN2 0x01
+#define TWL4030_GPIO_GPIODATAIN3 0x02
+#define TWL4030_GPIO_GPIODATADIR1 0x03
+#define TWL4030_GPIO_GPIODATADIR2 0x04
+#define TWL4030_GPIO_GPIODATADIR3 0x05
+#define TWL4030_GPIO_GPIODATAOUT1 0x06
+#define TWL4030_GPIO_GPIODATAOUT2 0x07
+#define TWL4030_GPIO_GPIODATAOUT3 0x08
+#define TWL4030_GPIO_CLEARGPIODATAOUT1 0x09
+#define TWL4030_GPIO_CLEARGPIODATAOUT2 0x0A
+#define TWL4030_GPIO_CLEARGPIODATAOUT3 0x0B
+#define TWL4030_GPIO_SETGPIODATAOUT1 0x0C
+#define TWL4030_GPIO_SETGPIODATAOUT2 0x0D
+#define TWL4030_GPIO_SETGPIODATAOUT3 0x0E
+#define TWL4030_GPIO_GPIO_DEBEN1 0x0F
+#define TWL4030_GPIO_GPIO_DEBEN2 0x10
+#define TWL4030_GPIO_GPIO_DEBEN3 0x11
+#define TWL4030_GPIO_GPIO_CTRL 0x12
+#define TWL4030_GPIO_GPIOPUPDCTR1 0x13
+#define TWL4030_GPIO_GPIOPUPDCTR2 0x14
+#define TWL4030_GPIO_GPIOPUPDCTR3 0x15
+#define TWL4030_GPIO_GPIOPUPDCTR4 0x16
+#define TWL4030_GPIO_GPIOPUPDCTR5 0x17
+#define TWL4030_GPIO_GPIO_ISR1A 0x19
+#define TWL4030_GPIO_GPIO_ISR2A 0x1A
+#define TWL4030_GPIO_GPIO_ISR3A 0x1B
+#define TWL4030_GPIO_GPIO_IMR1A 0x1C
+#define TWL4030_GPIO_GPIO_IMR2A 0x1D
+#define TWL4030_GPIO_GPIO_IMR3A 0x1E
+#define TWL4030_GPIO_GPIO_ISR1B 0x1F
+#define TWL4030_GPIO_GPIO_ISR2B 0x20
+#define TWL4030_GPIO_GPIO_ISR3B 0x21
+#define TWL4030_GPIO_GPIO_IMR1B 0x22
+#define TWL4030_GPIO_GPIO_IMR2B 0x23
+#define TWL4030_GPIO_GPIO_IMR3B 0x24
+#define TWL4030_GPIO_GPIO_EDR1 0x28
+#define TWL4030_GPIO_GPIO_EDR2 0x29
+#define TWL4030_GPIO_GPIO_EDR3 0x2A
+#define TWL4030_GPIO_GPIO_EDR4 0x2B
+#define TWL4030_GPIO_GPIO_EDR5 0x2C
+#define TWL4030_GPIO_GPIO_SIH_CTRL 0x2D
+
/*
* Convience functions to read and write from TWL4030
*
struct usb_device *usb_alloc_new_device(void *controller);
int usb_new_device(struct usb_device *dev);
+void usb_free_device(void);
#endif /*_USB_H_ */
*/
int fw_setenv(int argc, char *argv[])
{
- int i, len;
+ int i;
+ size_t len;
char *name;
char *value = NULL;
int lockfd = -1;
int retval = EXIT_SUCCESS;
- lockfd = open(lockname, O_WRONLY | O_CREAT | O_TRUNC);
+ lockfd = open(lockname, O_WRONLY | O_CREAT | O_TRUNC, 0666);
if (-1 == lockfd) {
fprintf(stderr, "Error opening lock file %s\n", lockname);
return EXIT_FAILURE;
projects / oweals / u-boot.git / commitdiff