omap3: cm-t3517: fix MMC1 pinmux

Fix MMC1 pinmux setup, thus enable SD/MMC card support with CM-T3517.

Signed-off-by: Dmitry Lifshitz <lifshitz@compulab.co.il>
Acked-by: Igor Grinberg <grinberg@compulab.co.il>

diff --git a/board/compulab/cm_t3517/mux.c b/board/compulab/cm_t3517/mux.c
index 88ce2cc2e642b92fbaa4b38cc5f33418595b934f..f31f19e7b82545236f01976693446e0b7bce2547 100644 (file)
--- a/board/compulab/cm_t3517/mux.c
+++ b/board/compulab/cm_t3517/mux.c
@@ -121,12 +121,12 @@ void set_muxconf_regs(void)
        MUX_VAL(CP(UART2_RX),           (IEN  | PTD | EN  | M4)); /*GPIO_147*/
 
        /* MMC1 */
-       MUX_VAL(CP(MMC1_CLK),           (IDIS | PTU | EN  | M0));
-       MUX_VAL(CP(MMC1_CMD),           (IEN  | PTU | EN  | M0));
-       MUX_VAL(CP(MMC1_DAT0),          (IEN  | PTU | EN  | M0));
-       MUX_VAL(CP(MMC1_DAT1),          (IEN  | PTU | EN  | M0));
-       MUX_VAL(CP(MMC1_DAT2),          (IEN  | PTU | EN  | M0));
-       MUX_VAL(CP(MMC1_DAT3),          (IEN  | PTU | EN  | M0));
+       MUX_VAL(CP(MMC1_CLK),           (IEN  | PTU | EN  | M0));
+       MUX_VAL(CP(MMC1_CMD),           (IEN  | PTU | DIS  | M0));
+       MUX_VAL(CP(MMC1_DAT0),          (IEN  | PTU | DIS  | M0));
+       MUX_VAL(CP(MMC1_DAT1),          (IEN  | PTU | DIS  | M0));
+       MUX_VAL(CP(MMC1_DAT2),          (IEN  | PTU | DIS  | M0));
+       MUX_VAL(CP(MMC1_DAT3),          (IEN  | PTU | DIS  | M0));
 
        /* DSS */
        MUX_VAL(CP(DSS_PCLK),           (IDIS | PTD | DIS | M0));