spi: ich: Add TPL support

In TPL we want to reduce code size and support running with CONFIG_PCI
disabled. Add special code to handle this using a fixed BAR programmed
into the SPI on boot. Also cache the SPI flash to speed up boot.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>

diff --git a/drivers/spi/ich.c b/drivers/spi/ich.c
index 160ec370fdae5b17da9ccb70a6b43b69a7980b89..0cd073c03c99a2985ca05a72deb60a0b771acac9 100644 (file)
--- a/drivers/spi/ich.c
+++ b/drivers/spi/ich.c
@@ -19,8 +19,11 @@
 #include <spi.h>
 #include <spi_flash.h>
 #include <spi-mem.h>
+#include <spl.h>
 #include <asm/fast_spi.h>
 #include <asm/io.h>
+#include <asm/mtrr.h>
+#include <linux/sizes.h>
 
 #include "ich.h"
 
@@ -115,6 +118,8 @@ static bool ich9_can_do_33mhz(struct udevice *dev)
        struct ich_spi_priv *priv = dev_get_priv(dev);
        u32 fdod, speed;
 
+       if (!CONFIG_IS_ENABLED(PCI))
+               return false;
        /* Observe SPI Descriptor Component Section 0 */
        dm_pci_write_config32(priv->pch, 0xb0, 0x1000);
 
@@ -706,6 +711,15 @@ static int ich_init_controller(struct udevice *dev,
                               struct ich_spi_platdata *plat,
                               struct ich_spi_priv *ctlr)
 {
+       if (spl_phase() == PHASE_TPL) {
+               struct ich_spi_platdata *plat = dev_get_platdata(dev);
+               int ret;
+
+               ret = fast_spi_early_init(plat->bdf, plat->mmio_base);
+               if (ret)
+                       return ret;
+       }
+
        ctlr->base = (void *)plat->mmio_base;
        if (plat->ich_version == ICHV_7) {
                struct ich7_spi_regs *ich7_spi = ctlr->base;
@@ -754,6 +768,26 @@ static int ich_init_controller(struct udevice *dev,
        return 0;
 }
 
+static int ich_cache_bios_region(struct udevice *dev)
+{
+       ulong map_base;
+       uint map_size;
+       uint offset;
+       ulong base;
+       int ret;
+
+       ret = ich_get_mmap_bus(dev, &map_base, &map_size, &offset);
+       if (ret)
+               return ret;
+
+       /* Don't use WRBACK since we are not supposed to write to SPI flash */
+       base = SZ_4G - map_size;
+       mtrr_set_next_var(MTRR_TYPE_WRPROT, base, map_size);
+       log_debug("BIOS cache base=%lx, size=%x\n", base, (uint)map_size);
+
+       return 0;
+}
+
 static int ich_spi_probe(struct udevice *dev)
 {
        struct ich_spi_platdata *plat = dev_get_platdata(dev);
@@ -764,10 +798,16 @@ static int ich_spi_probe(struct udevice *dev)
        if (ret)
                return ret;
 
-       ret = ich_protect_lockdown(dev);
-       if (ret)
-               return ret;
-
+       if (spl_phase() == PHASE_TPL) {
+               /* Cache the BIOS to speed things up */
+               ret = ich_cache_bios_region(dev);
+               if (ret)
+                       return ret;
+       } else {
+               ret = ich_protect_lockdown(dev);
+               if (ret)
+                       return ret;
+       }
        priv->cur_speed = priv->max_speed;
 
        return 0;