--- /dev/null
+# Copyright (C) 2008 OpenWrt.org
+
+config interface loopback
+ option ifname lo
+ option proto static
+ option ipaddr 127.0.0.1
+ option netmask 255.0.0.0
+
+config interface lan
+ option type bridge
+ option ifname eth0
+ option proto static
+ option ipaddr 192.168.1.1
+ option netmask 255.255.255.0
brcm63xx_detect
case "$board_name" in
- "bcm63xx/CPVA642 "* | "bcm63xx/MAGIC "* | "bcm63xx/V2500V_BB "* | "bcm63xx/V2110 "*)
+ "bcm63xx/CPVA642 "* | "bcm63xx/MAGIC "* | "bcm63xx/V2500V_BB "* | \
+ "bcm63xx/V2110 "* | "bcm63xx/CPVA502+ "*)
do_fixcrc
;;
esac
struct gpio_led leds[5];
+
+ /* Buttons */
-+ struct gpio_button buttons[2];
++ struct gpio_button buttons[4];
};
#endif /* ! BOARD_BCM963XX_H_ */
@@ -61,6 +61,10 @@ struct board_info {
/* Buttons */
- struct gpio_button buttons[2];
+ struct gpio_button buttons[4];
+
+ /* Additional platform devices */
+ struct platform_device **devs;
+ .active_low = 1,
+ },
+ {
-+ .name = "adsl:red",
++ .name = "adsl:green",
+ .gpio = 9,
+ .active_low = 1,
+ },
+ {
-+ .name = "adsl:green",
++ .name = "adsl:red",
+ .gpio = 10,
+ .active_low = 1,
+ },
+ .active_low = 1,
+ },
+ {
-+ .name = "internet:red",
++ .name = "internet:green",
+ .gpio = 25,
+ .active_low = 1,
+ },
+ {
-+ .name = "internet:green",
++ .name = "internet:red",
+ .gpio = 24,
+ .active_low = 1,
+ },
+ struct gpio_led leds[14];
/* Buttons */
- struct gpio_button buttons[2];
+ struct gpio_button buttons[4];
--- /dev/null
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -1009,6 +1009,67 @@ static struct board_info __initdata boar
+ },
+ };
+
++static struct board_info __initdata board_96348A_122 = {
++ .name = "96348A-122",
++ .expected_cpu_id = 0x6348,
++
++ .has_uart0 = 1,
++ .has_enet1 = 1,
++ .has_pci = 1,
++
++ .enet1 = {
++ .force_speed_100 = 1,
++ .force_duplex_full = 1,
++ },
++
++ .has_ohci0 = 1,
++
++ .leds = {
++ {
++ .name = "power",
++ .gpio = 0,
++ .active_low = 1,
++ .default_trigger = "default-on",
++ },
++ {
++ .name = "alarm",
++ .gpio = 2,
++ .active_low = 1,
++ },
++ {
++ .name = "wps",
++ .gpio = 6,
++ .active_low = 1,
++ },
++ },
++ .buttons = {
++ {
++ .desc = "reset",
++ .gpio = 33,
++ .active_low = 1,
++ .type = EV_KEY,
++ .code = KEY_RESTART,
++ .threshold = 3,
++ },
++ {
++ .desc = "wifi",
++ .gpio = 34,
++ .active_low = 1,
++ .type = EV_KEY,
++ .code = BTN_0,
++ .threshold = 3,
++ },
++ {
++ .desc = "wps",
++ .gpio = 35,
++ .active_low = 1,
++ .type = EV_KEY,
++ .code = KEY_WPS_BUTTON,
++ .threshold = 3,
++ },
++ },
++};
++
+ #endif
+
+ /*
+@@ -2068,6 +2129,7 @@ static const struct board_info __initdat
+ &board_V2500V_BB,
+ &board_V2110,
+ &board_ct536_ct5621,
++ &board_96348A_122,
+ #endif
+
+ #ifdef CONFIG_BCM63XX_CPU_6358
--- /dev/null
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -704,6 +704,7 @@ static struct board_info __initdata boar
+ .name = "RTA1025W_16",
+ .expected_cpu_id = 0x6348,
+
++ .has_uart0 = 1,
+ .has_enet0 = 1,
+ .has_enet1 = 1,
+ .has_pci = 1,
--- /dev/null
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -1071,6 +1071,44 @@ static struct board_info __initdata boar
+ },
+ };
+
++static struct board_info __initdata board_CPVA502plus = {
++ .name = "CPVA502+",
++ .expected_cpu_id = 0x6348,
++
++ .has_uart0 = 1,
++ .has_enet0 = 1,
++ .has_enet1 = 1,
++ .has_pci = 1,
++
++ .enet0 = {
++ .has_phy = 1,
++ .use_internal_phy = 1,
++ },
++ .enet1 = {
++ .force_speed_100 = 1,
++ .force_duplex_full = 1,
++ },
++
++ .has_udc0 = 1,
++
++ .leds = {
++ {
++ .name = "phone",
++ .gpio = 0,
++ .active_low = 1,
++ },
++ {
++ .name = "link",
++ .gpio = 5,
++ .active_low = 1,
++ },
++ {
++ .name = "feth1", /* FIXME:does gpio4 enable eth1 phy? */
++ .gpio = 4,
++ .active_low = 1,
++ },
++ },
++};
+ #endif
+
+ /*
+@@ -2131,6 +2169,7 @@ static const struct board_info __initdat
+ &board_V2110,
+ &board_ct536_ct5621,
+ &board_96348A_122,
++ &board_CPVA502plus,
+ #endif
+
+ #ifdef CONFIG_BCM63XX_CPU_6358
--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -2108,7 +2108,7 @@ static void __init nb4_nvram_fixup(void)
+@@ -2210,7 +2210,7 @@ static void __init nb4_nvram_fixup(void)
* bcm4318 WLAN work
*/
#ifdef CONFIG_SSB_PCIHOST
.revision = 0x02,
.board_rev = 0x17,
.country_code = 0x0,
-@@ -2128,6 +2128,7 @@ static struct ssb_sprom bcm63xx_sprom =
+@@ -2230,6 +2230,7 @@ static struct ssb_sprom bcm63xx_sprom =
.boardflags_lo = 0x2848,
.boardflags_hi = 0x0000,
};
struct gpio_led leds[5];
+
+ /* Buttons */
-+ struct gpio_button buttons[2];
++ struct gpio_button buttons[4];
};
#endif /* ! BOARD_BCM963XX_H_ */
@@ -61,6 +61,10 @@ struct board_info {
/* Buttons */
- struct gpio_button buttons[2];
+ struct gpio_button buttons[4];
+
+ /* Additional platform devices */
+ struct platform_device **devs;
+ .active_low = 1,
+ },
+ {
-+ .name = "adsl:red",
++ .name = "adsl:green",
+ .gpio = 9,
+ .active_low = 1,
+ },
+ {
-+ .name = "adsl:green",
++ .name = "adsl:red",
+ .gpio = 10,
+ .active_low = 1,
+ },
+ .active_low = 1,
+ },
+ {
-+ .name = "internet:red",
++ .name = "internet:green",
+ .gpio = 25,
+ .active_low = 1,
+ },
+ {
-+ .name = "internet:green",
++ .name = "internet:red",
+ .gpio = 24,
+ .active_low = 1,
+ },
+ struct gpio_led leds[14];
/* Buttons */
- struct gpio_button buttons[2];
+ struct gpio_button buttons[4];
--- /dev/null
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -1009,6 +1009,67 @@ static struct board_info __initdata boar
+ },
+ };
+
++static struct board_info __initdata board_96348A_122 = {
++ .name = "96348A-122",
++ .expected_cpu_id = 0x6348,
++
++ .has_uart0 = 1,
++ .has_enet1 = 1,
++ .has_pci = 1,
++
++ .enet1 = {
++ .force_speed_100 = 1,
++ .force_duplex_full = 1,
++ },
++
++ .has_ohci0 = 1,
++
++ .leds = {
++ {
++ .name = "power",
++ .gpio = 0,
++ .active_low = 1,
++ .default_trigger = "default-on",
++ },
++ {
++ .name = "alarm",
++ .gpio = 2,
++ .active_low = 1,
++ },
++ {
++ .name = "wps",
++ .gpio = 6,
++ .active_low = 1,
++ },
++ },
++ .buttons = {
++ {
++ .desc = "reset",
++ .gpio = 33,
++ .active_low = 1,
++ .type = EV_KEY,
++ .code = KEY_RESTART,
++ .threshold = 3,
++ },
++ {
++ .desc = "wifi",
++ .gpio = 34,
++ .active_low = 1,
++ .type = EV_KEY,
++ .code = BTN_0,
++ .threshold = 3,
++ },
++ {
++ .desc = "wps",
++ .gpio = 35,
++ .active_low = 1,
++ .type = EV_KEY,
++ .code = KEY_WPS_BUTTON,
++ .threshold = 3,
++ },
++ },
++};
++
+ #endif
+
+ /*
+@@ -2068,6 +2129,7 @@ static const struct board_info __initdat
+ &board_V2500V_BB,
+ &board_V2110,
+ &board_ct536_ct5621,
++ &board_96348A_122,
+ #endif
+
+ #ifdef CONFIG_BCM63XX_CPU_6358
--- /dev/null
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -704,6 +704,7 @@ static struct board_info __initdata boar
+ .name = "RTA1025W_16",
+ .expected_cpu_id = 0x6348,
+
++ .has_uart0 = 1,
+ .has_enet0 = 1,
+ .has_enet1 = 1,
+ .has_pci = 1,
--- /dev/null
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -1071,6 +1071,44 @@ static struct board_info __initdata boar
+ },
+ };
+
++static struct board_info __initdata board_CPVA502plus = {
++ .name = "CPVA502+",
++ .expected_cpu_id = 0x6348,
++
++ .has_uart0 = 1,
++ .has_enet0 = 1,
++ .has_enet1 = 1,
++ .has_pci = 1,
++
++ .enet0 = {
++ .has_phy = 1,
++ .use_internal_phy = 1,
++ },
++ .enet1 = {
++ .force_speed_100 = 1,
++ .force_duplex_full = 1,
++ },
++
++ .has_udc0 = 1,
++
++ .leds = {
++ {
++ .name = "phone",
++ .gpio = 0,
++ .active_low = 1,
++ },
++ {
++ .name = "link",
++ .gpio = 5,
++ .active_low = 1,
++ },
++ {
++ .name = "feth1", /* FIXME:does gpio4 enable eth1 phy? */
++ .gpio = 4,
++ .active_low = 1,
++ },
++ },
++};
+ #endif
+
+ /*
+@@ -2131,6 +2169,7 @@ static const struct board_info __initdat
+ &board_V2110,
+ &board_ct536_ct5621,
+ &board_96348A_122,
++ &board_CPVA502plus,
+ #endif
+
+ #ifdef CONFIG_BCM63XX_CPU_6358
--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -2108,7 +2108,7 @@ static void __init nb4_nvram_fixup(void)
+@@ -2210,7 +2210,7 @@ static void __init nb4_nvram_fixup(void)
* bcm4318 WLAN work
*/
#ifdef CONFIG_SSB_PCIHOST
.revision = 0x02,
.board_rev = 0x17,
.country_code = 0x0,
-@@ -2128,6 +2128,7 @@ static struct ssb_sprom bcm63xx_sprom =
+@@ -2230,6 +2230,7 @@ static struct ssb_sprom bcm63xx_sprom =
.boardflags_lo = 0x2848,
.boardflags_hi = 0x0000,
};
struct gpio_led leds[5];
+
+ /* Buttons */
-+ struct gpio_button buttons[2];
++ struct gpio_button buttons[4];
};
#endif /* ! BOARD_BCM963XX_H_ */
@@ -61,6 +61,10 @@ struct board_info {
/* Buttons */
- struct gpio_button buttons[2];
+ struct gpio_button buttons[4];
+
+ /* Additional platform devices */
+ struct platform_device **devs;
+ .active_low = 1,
+ },
+ {
-+ .name = "adsl:red",
++ .name = "adsl:green",
+ .gpio = 9,
+ .active_low = 1,
+ },
+ {
-+ .name = "adsl:green",
++ .name = "adsl:red",
+ .gpio = 10,
+ .active_low = 1,
+ },
+ .active_low = 1,
+ },
+ {
-+ .name = "internet:red",
++ .name = "internet:green",
+ .gpio = 25,
+ .active_low = 1,
+ },
+ {
-+ .name = "internet:green",
++ .name = "internet:red",
+ .gpio = 24,
+ .active_low = 1,
+ },
+ struct gpio_led leds[14];
/* Buttons */
- struct gpio_button buttons[2];
+ struct gpio_button buttons[4];
--- /dev/null
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -1010,6 +1010,67 @@ static struct board_info __initdata boar
+ },
+ };
+
++static struct board_info __initdata board_96348A_122 = {
++ .name = "96348A-122",
++ .expected_cpu_id = 0x6348,
++
++ .has_uart0 = 1,
++ .has_enet1 = 1,
++ .has_pci = 1,
++
++ .enet1 = {
++ .force_speed_100 = 1,
++ .force_duplex_full = 1,
++ },
++
++ .has_ohci0 = 1,
++
++ .leds = {
++ {
++ .name = "power",
++ .gpio = 0,
++ .active_low = 1,
++ .default_trigger = "default-on",
++ },
++ {
++ .name = "alarm",
++ .gpio = 2,
++ .active_low = 1,
++ },
++ {
++ .name = "wps",
++ .gpio = 6,
++ .active_low = 1,
++ },
++ },
++ .buttons = {
++ {
++ .desc = "reset",
++ .gpio = 33,
++ .active_low = 1,
++ .type = EV_KEY,
++ .code = KEY_RESTART,
++ .threshold = 3,
++ },
++ {
++ .desc = "wifi",
++ .gpio = 34,
++ .active_low = 1,
++ .type = EV_KEY,
++ .code = BTN_0,
++ .threshold = 3,
++ },
++ {
++ .desc = "wps",
++ .gpio = 35,
++ .active_low = 1,
++ .type = EV_KEY,
++ .code = KEY_WPS_BUTTON,
++ .threshold = 3,
++ },
++ },
++};
++
+ #endif
+
+ /*
+@@ -2069,6 +2130,7 @@ static const struct board_info __initdat
+ &board_V2500V_BB,
+ &board_V2110,
+ &board_ct536_ct5621,
++ &board_96348A_122,
+ #endif
+
+ #ifdef CONFIG_BCM63XX_CPU_6358
--- /dev/null
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -705,6 +705,7 @@ static struct board_info __initdata boar
+ .name = "RTA1025W_16",
+ .expected_cpu_id = 0x6348,
+
++ .has_uart0 = 1,
+ .has_enet0 = 1,
+ .has_enet1 = 1,
+ .has_pci = 1,
--- /dev/null
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -1072,6 +1072,44 @@ static struct board_info __initdata boar
+ },
+ };
+
++static struct board_info __initdata board_CPVA502plus = {
++ .name = "CPVA502+",
++ .expected_cpu_id = 0x6348,
++
++ .has_uart0 = 1,
++ .has_enet0 = 1,
++ .has_enet1 = 1,
++ .has_pci = 1,
++
++ .enet0 = {
++ .has_phy = 1,
++ .use_internal_phy = 1,
++ },
++ .enet1 = {
++ .force_speed_100 = 1,
++ .force_duplex_full = 1,
++ },
++
++ .has_udc0 = 1,
++
++ .leds = {
++ {
++ .name = "phone",
++ .gpio = 0,
++ .active_low = 1,
++ },
++ {
++ .name = "link",
++ .gpio = 5,
++ .active_low = 1,
++ },
++ {
++ .name = "feth1", /* FIXME:does gpio4 enable eth1 phy? */
++ .gpio = 4,
++ .active_low = 1,
++ },
++ },
++};
+ #endif
+
+ /*
+@@ -2132,6 +2170,7 @@ static const struct board_info __initdat
+ &board_V2110,
+ &board_ct536_ct5621,
+ &board_96348A_122,
++ &board_CPVA502plus,
+ #endif
+
+ #ifdef CONFIG_BCM63XX_CPU_6358
--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -2109,7 +2109,7 @@ static void __init nb4_nvram_fixup(void)
+@@ -2211,7 +2211,7 @@ static void __init nb4_nvram_fixup(void)
* bcm4318 WLAN work
*/
#ifdef CONFIG_SSB_PCIHOST
.revision = 0x02,
.board_rev = 0x17,
.country_code = 0x0,
-@@ -2129,6 +2129,7 @@ static struct ssb_sprom bcm63xx_sprom =
+@@ -2231,6 +2231,7 @@ static struct ssb_sprom bcm63xx_sprom =
.boardflags_lo = 0x2848,
.boardflags_hi = 0x0000,
};
+ BCM6358 and later chips.
+
config USB_EHCI_FSL
- bool "Support for Freescale on-chip EHCI USB controller"
+ bool "Support for Freescale PPC on-chip EHCI USB controller"
depends on USB_EHCI_HCD && FSL_SOC
--- /dev/null
+++ b/drivers/usb/host/ehci-bcm63xx.c
struct gpio_led leds[5];
+
+ /* Buttons */
-+ struct gpio_button buttons[2];
++ struct gpio_button buttons[4];
};
#endif /* ! BOARD_BCM963XX_H_ */
@@ -62,6 +62,10 @@ struct board_info {
/* Buttons */
- struct gpio_button buttons[2];
+ struct gpio_button buttons[4];
+
+ /* Additional platform devices */
+ struct platform_device **devs;
+ .active_low = 1,
+ },
+ {
-+ .name = "adsl:red",
++ .name = "adsl:green",
+ .gpio = 9,
+ .active_low = 1,
+ },
+ {
-+ .name = "adsl:green",
++ .name = "adsl:red",
+ .gpio = 10,
+ .active_low = 1,
+ },
+ .active_low = 1,
+ },
+ {
-+ .name = "internet:red",
++ .name = "internet:green",
+ .gpio = 25,
+ .active_low = 1,
+ },
+ {
-+ .name = "internet:green",
++ .name = "internet:red",
+ .gpio = 24,
+ .active_low = 1,
+ },
+ struct gpio_led leds[14];
/* Buttons */
- struct gpio_button buttons[2];
+ struct gpio_button buttons[4];
--- /dev/null
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -1010,6 +1010,67 @@ static struct board_info __initdata boar
+ },
+ };
+
++static struct board_info __initdata board_96348A_122 = {
++ .name = "96348A-122",
++ .expected_cpu_id = 0x6348,
++
++ .has_uart0 = 1,
++ .has_enet1 = 1,
++ .has_pci = 1,
++
++ .enet1 = {
++ .force_speed_100 = 1,
++ .force_duplex_full = 1,
++ },
++
++ .has_ohci0 = 1,
++
++ .leds = {
++ {
++ .name = "power",
++ .gpio = 0,
++ .active_low = 1,
++ .default_trigger = "default-on",
++ },
++ {
++ .name = "alarm",
++ .gpio = 2,
++ .active_low = 1,
++ },
++ {
++ .name = "wps",
++ .gpio = 6,
++ .active_low = 1,
++ },
++ },
++ .buttons = {
++ {
++ .desc = "reset",
++ .gpio = 33,
++ .active_low = 1,
++ .type = EV_KEY,
++ .code = KEY_RESTART,
++ .threshold = 3,
++ },
++ {
++ .desc = "wifi",
++ .gpio = 34,
++ .active_low = 1,
++ .type = EV_KEY,
++ .code = BTN_0,
++ .threshold = 3,
++ },
++ {
++ .desc = "wps",
++ .gpio = 35,
++ .active_low = 1,
++ .type = EV_KEY,
++ .code = KEY_WPS_BUTTON,
++ .threshold = 3,
++ },
++ },
++};
++
+ #endif
+
+ /*
+@@ -2069,6 +2130,7 @@ static const struct board_info __initdat
+ &board_V2500V_BB,
+ &board_V2110,
+ &board_ct536_ct5621,
++ &board_96348A_122,
+ #endif
+
+ #ifdef CONFIG_BCM63XX_CPU_6358
--- /dev/null
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -705,6 +705,7 @@ static struct board_info __initdata boar
+ .name = "RTA1025W_16",
+ .expected_cpu_id = 0x6348,
+
++ .has_uart0 = 1,
+ .has_enet0 = 1,
+ .has_enet1 = 1,
+ .has_pci = 1,
--- /dev/null
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -1072,6 +1072,44 @@ static struct board_info __initdata boar
+ },
+ };
+
++static struct board_info __initdata board_CPVA502plus = {
++ .name = "CPVA502+",
++ .expected_cpu_id = 0x6348,
++
++ .has_uart0 = 1,
++ .has_enet0 = 1,
++ .has_enet1 = 1,
++ .has_pci = 1,
++
++ .enet0 = {
++ .has_phy = 1,
++ .use_internal_phy = 1,
++ },
++ .enet1 = {
++ .force_speed_100 = 1,
++ .force_duplex_full = 1,
++ },
++
++ .has_udc0 = 1,
++
++ .leds = {
++ {
++ .name = "phone",
++ .gpio = 0,
++ .active_low = 1,
++ },
++ {
++ .name = "link",
++ .gpio = 5,
++ .active_low = 1,
++ },
++ {
++ .name = "feth1", /* FIXME:does gpio4 enable eth1 phy? */
++ .gpio = 4,
++ .active_low = 1,
++ },
++ },
++};
+ #endif
+
+ /*
+@@ -2132,6 +2170,7 @@ static const struct board_info __initdat
+ &board_V2110,
+ &board_ct536_ct5621,
+ &board_96348A_122,
++ &board_CPVA502plus,
+ #endif
+
+ #ifdef CONFIG_BCM63XX_CPU_6358
--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -2109,7 +2109,7 @@ static void __init nb4_nvram_fixup(void)
+@@ -2211,7 +2211,7 @@ static void __init nb4_nvram_fixup(void)
* bcm4318 WLAN work
*/
#ifdef CONFIG_SSB_PCIHOST
.revision = 0x02,
.board_rev = 0x17,
.country_code = 0x0,
-@@ -2129,6 +2129,7 @@ static struct ssb_sprom bcm63xx_sprom =
+@@ -2231,6 +2231,7 @@ static struct ssb_sprom bcm63xx_sprom =
.boardflags_lo = 0x2848,
.boardflags_hi = 0x0000,
};
drivers/atm/solos-attrlist.c | 2 ++
1 files changed, 2 insertions(+), 0 deletions(-)
-diff --git a/drivers/atm/solos-attrlist.c b/drivers/atm/solos-attrlist.c
-index 9a676ee..8092533 100644
--- a/drivers/atm/solos-attrlist.c
+++ b/drivers/atm/solos-attrlist.c
@@ -71,6 +71,8 @@ SOLOS_ATTR_RW(BisAForceSNRMarginDn)
SOLOS_ATTR_RW(AnnexAForceSNRMarginDn)
SOLOS_ATTR_RW(AnnexAMaxMargin)
SOLOS_ATTR_RW(AnnexMMaxMargin)
-
-From: Nathan Williams <nathan@traverse.com.au>
-To: netdev@vger.kernel.org
-Date: Wed, 05 Oct 2011 15:44:17 +1100
-Cc: linux-atm-general@lists.sourceforge.net,
- David Woodhouse <dwmw2@infradead.org>, linux-kernel@vger.kernel.org
-Subject: [Linux-ATM-General] [PATCH 2/4] atm: solos-pci: Remove annoying
- line of debugging
-
-"len: %d" isn't particularly useful for anyone and confuses users.
-
-Signed-off-by: Nathan Williams <nathan@traverse.com.au>
----
- drivers/atm/solos-pci.c | 1 -
- 1 files changed, 0 insertions(+), 1 deletions(-)
-
-diff --git a/drivers/atm/solos-pci.c b/drivers/atm/solos-pci.c
-index 5d1d076..bd01aa3 100644
--- a/drivers/atm/solos-pci.c
+++ b/drivers/atm/solos-pci.c
-@@ -452,7 +452,6 @@ static ssize_t console_show(struct device *dev, struct device_attribute *attr,
+@@ -42,7 +42,8 @@
+ #include <linux/swab.h>
+ #include <linux/slab.h>
- len = skb->len;
- memcpy(buf, skb->data, len);
-- dev_dbg(&card->dev->dev, "len: %d\n", len);
+-#define VERSION "0.07"
++#define VERSION "1.0"
++#define DRIVER_VERSION 0x01
+ #define PTAG "solos-pci"
- kfree_skb(skb);
- return len;
-From: Nathan Williams <nathan@traverse.com.au>
-To: netdev@vger.kernel.org
-Date: Wed, 05 Oct 2011 15:45:15 +1100
-Cc: linux-atm-general@lists.sourceforge.net,
- David Woodhouse <dwmw2@infradead.org>, linux-kernel@vger.kernel.org
-Subject: [Linux-ATM-General] [PATCH 3/4] atm: solos-pci: Add support for
- Geos GPIO pins
-
-Geos ADSL2+ routers have on-board Solos chipsets with some
-extra I/O pins and a push button connected to the FPGA.
-
-PCB version and variant numbers are also made available
-through the HardwareVersion and HardwareVariant attributes.
-
-Signed-off-by: Nathan Williams <nathan@traverse.com.au>
----
- drivers/atm/solos-pci.c | 98 +++++++++++++++++++++++++++++++++++++++++++++++
- 1 files changed, 98 insertions(+), 0 deletions(-)
-
-diff --git a/drivers/atm/solos-pci.c b/drivers/atm/solos-pci.c
-index bd01aa3..33c0c2b 100644
---- a/drivers/atm/solos-pci.c
-+++ b/drivers/atm/solos-pci.c
-@@ -56,6 +56,7 @@
+ #define CONFIG_RAM_SIZE 128
+@@ -56,16 +57,21 @@
#define FLASH_BUSY 0x60
#define FPGA_MODE 0x5C
#define FLASH_MODE 0x58
+#define GPIO_STATUS 0x54
++#define DRIVER_VER 0x50
#define TX_DMA_ADDR(port) (0x40 + (4 * (port)))
#define RX_DMA_ADDR(port) (0x30 + (4 * (port)))
-@@ -498,6 +499,87 @@ static ssize_t console_store(struct device *dev, struct device_attribute *attr,
+ #define DATA_RAM_SIZE 32768
+ #define BUF_SIZE 2048
+ #define OLD_BUF_SIZE 4096 /* For FPGA versions <= 2*/
+-#define FPGA_PAGE 528 /* FPGA flash page size*/
+-#define SOLOS_PAGE 512 /* Solos flash page size*/
+-#define FPGA_BLOCK (FPGA_PAGE * 8) /* FPGA flash block size*/
+-#define SOLOS_BLOCK (SOLOS_PAGE * 8) /* Solos flash block size*/
++/* Old boards use ATMEL AD45DB161D flash */
++#define ATMEL_FPGA_PAGE 528 /* FPGA flash page size*/
++#define ATMEL_SOLOS_PAGE 512 /* Solos flash page size*/
++#define ATMEL_FPGA_BLOCK (ATMEL_FPGA_PAGE * 8) /* FPGA block size*/
++#define ATMEL_SOLOS_BLOCK (ATMEL_SOLOS_PAGE * 8) /* Solos block size*/
++/* Current boards use M25P/M25PE SPI flash */
++#define SPI_FLASH_BLOCK (256 * 64)
+
+ #define RX_BUF(card, nr) ((card->buffers) + (nr)*(card->buffer_size)*2)
+ #define TX_BUF(card, nr) ((card->buffers) + (nr)*(card->buffer_size)*2 + (card->buffer_size))
+@@ -127,6 +133,7 @@ struct solos_card {
+ int using_dma;
+ int fpga_version;
+ int buffer_size;
++ int atmel_flash;
+ };
+
+
+@@ -452,7 +459,6 @@ static ssize_t console_show(struct devic
+
+ len = skb->len;
+ memcpy(buf, skb->data, len);
+- dev_dbg(&card->dev->dev, "len: %d\n", len);
+
+ kfree_skb(skb);
+ return len;
+@@ -499,6 +505,87 @@ static ssize_t console_store(struct devi
return err?:count;
}
static DEVICE_ATTR(console, 0644, console_show, console_store);
-@@ -506,6 +588,14 @@ static DEVICE_ATTR(console, 0644, console_show, console_store);
+@@ -507,6 +594,14 @@ static DEVICE_ATTR(console, 0644, consol
#include "solos-attrlist.c"
#undef SOLOS_ATTR_RO
#undef SOLOS_ATTR_RW
-@@ -514,6 +604,14 @@ static DEVICE_ATTR(console, 0644, console_show, console_store);
+@@ -515,6 +610,14 @@ static DEVICE_ATTR(console, 0644, consol
static struct attribute *solos_attrs[] = {
#include "solos-attrlist.c"
NULL
};
-From: Nathan Williams <nathan@traverse.com.au>
-To: netdev@vger.kernel.org
-Date: Wed, 05 Oct 2011 15:46:08 +1100
-Cc: linux-atm-general@lists.sourceforge.net,
- David Woodhouse <dwmw2@infradead.org>, linux-kernel@vger.kernel.org
-Subject: [Linux-ATM-General] [PATCH 4/4] atm: solos-pci: M25P/M25PE SPI
- flash support
-
-Newer Geos ADSL2+ routers have different SPI flash.
-The FPGA on these boards require driver version = 1 to enable
-flash upgrades so old drivers can't corrupt new boards.
-
-Signed-off-by: Nathan Williams <nathan@traverse.com.au>
----
- drivers/atm/solos-pci.c | 51 ++++++++++++++++++++++++++++++++++++----------
- 1 files changed, 40 insertions(+), 11 deletions(-)
-
-diff --git a/drivers/atm/solos-pci.c b/drivers/atm/solos-pci.c
-index 33c0c2b..2a75bf7 100644
---- a/drivers/atm/solos-pci.c
-+++ b/drivers/atm/solos-pci.c
-@@ -42,7 +42,8 @@
- #include <linux/swab.h>
- #include <linux/slab.h>
-
--#define VERSION "0.07"
-+#define VERSION "1.0"
-+#define DRIVER_VERSION 0x01
- #define PTAG "solos-pci"
-
- #define CONFIG_RAM_SIZE 128
-@@ -57,16 +58,20 @@
- #define FPGA_MODE 0x5C
- #define FLASH_MODE 0x58
- #define GPIO_STATUS 0x54
-+#define DRIVER_VER 0x50
- #define TX_DMA_ADDR(port) (0x40 + (4 * (port)))
- #define RX_DMA_ADDR(port) (0x30 + (4 * (port)))
-
- #define DATA_RAM_SIZE 32768
- #define BUF_SIZE 2048
- #define OLD_BUF_SIZE 4096 /* For FPGA versions <= 2*/
--#define FPGA_PAGE 528 /* FPGA flash page size*/
--#define SOLOS_PAGE 512 /* Solos flash page size*/
--#define FPGA_BLOCK (FPGA_PAGE * 8) /* FPGA flash block size*/
--#define SOLOS_BLOCK (SOLOS_PAGE * 8) /* Solos flash block size*/
-+/* Old boards use ATMEL AD45DB161D flash */
-+#define ATMEL_FPGA_PAGE 528 /* FPGA flash page size*/
-+#define ATMEL_SOLOS_PAGE 512 /* Solos flash page size*/
-+#define ATMEL_FPGA_BLOCK (ATMEL_FPGA_PAGE * 8) /* FPGA block size*/
-+#define ATMEL_SOLOS_BLOCK (ATMEL_SOLOS_PAGE * 8) /* Solos block size*/
-+/* Current boards use M25P/M25PE SPI flash */
-+#define SPI_FLASH_BLOCK (256 * 64)
-
- #define RX_BUF(card, nr) ((card->buffers) + (nr)*(card->buffer_size)*2)
- #define TX_BUF(card, nr) ((card->buffers) + (nr)*(card->buffer_size)*2 + (card->buffer_size))
-@@ -128,6 +133,7 @@ struct solos_card {
- int using_dma;
- int fpga_version;
- int buffer_size;
-+ int atmel_flash;
- };
-
-
-@@ -631,16 +637,25 @@ static int flash_upgrade(struct solos_card *card, int chip)
+@@ -534,16 +637,25 @@ static int flash_upgrade(struct solos_ca
switch (chip) {
case 0:
fw_name = "solos-FPGA.bin";
} else {
dev_info(&card->dev->dev, "FPGA version doesn't support"
" daughter board upgrades\n");
-@@ -650,7 +665,10 @@ static int flash_upgrade(struct solos_card *card, int chip)
+@@ -553,7 +665,10 @@ static int flash_upgrade(struct solos_ca
case 3:
if (card->fpga_version > LEGACY_BUFFERS){
fw_name = "solos-Firmware.bin";
} else {
dev_info(&card->dev->dev, "FPGA version doesn't support"
" daughter board upgrades\n");
-@@ -695,9 +713,13 @@ static int flash_upgrade(struct solos_card *card, int chip)
+@@ -598,9 +713,13 @@ static int flash_upgrade(struct solos_ca
/* dev_info(&card->dev->dev, "Set FPGA Flash mode to Block Write\n"); */
iowrite32(((chip * 2) + 1), card->config_regs + FLASH_MODE);
if(card->fpga_version > LEGACY_BUFFERS)
iowrite32(word, FLASH_BUF + i);
else
-@@ -1249,6 +1271,11 @@ static int fpga_probe(struct pci_dev *dev, const struct pci_device_id *id)
+@@ -1152,6 +1271,11 @@ static int fpga_probe(struct pci_dev *de
db_fpga_upgrade = db_firmware_upgrade = 0;
}
if (card->fpga_version >= DMA_SUPPORTED){
card->using_dma = 1;
} else {
-@@ -1256,6 +1283,8 @@ static int fpga_probe(struct pci_dev *dev, const struct pci_device_id *id)
+@@ -1159,6 +1283,8 @@ static int fpga_probe(struct pci_dev *de
/* Set RX empty flag for all ports */
iowrite32(0xF0, card->config_regs + FLAGS_ADDR);
}
ifeq ($(CONFIG_TUNE_CELL),y)
KBUILD_CFLAGS += $(call cc-option,-mtune=cell)
-
drivers/atm/solos-attrlist.c | 2 ++
1 files changed, 2 insertions(+), 0 deletions(-)
-diff --git a/drivers/atm/solos-attrlist.c b/drivers/atm/solos-attrlist.c
-index 9a676ee..8092533 100644
--- a/drivers/atm/solos-attrlist.c
+++ b/drivers/atm/solos-attrlist.c
@@ -71,6 +71,8 @@ SOLOS_ATTR_RW(BisAForceSNRMarginDn)
SOLOS_ATTR_RW(AnnexAForceSNRMarginDn)
SOLOS_ATTR_RW(AnnexAMaxMargin)
SOLOS_ATTR_RW(AnnexMMaxMargin)
-
-From: Nathan Williams <nathan@traverse.com.au>
-To: netdev@vger.kernel.org
-Date: Wed, 05 Oct 2011 15:44:17 +1100
-Cc: linux-atm-general@lists.sourceforge.net,
- David Woodhouse <dwmw2@infradead.org>, linux-kernel@vger.kernel.org
-Subject: [Linux-ATM-General] [PATCH 2/4] atm: solos-pci: Remove annoying
- line of debugging
-
-"len: %d" isn't particularly useful for anyone and confuses users.
-
-Signed-off-by: Nathan Williams <nathan@traverse.com.au>
----
- drivers/atm/solos-pci.c | 1 -
- 1 files changed, 0 insertions(+), 1 deletions(-)
-
-diff --git a/drivers/atm/solos-pci.c b/drivers/atm/solos-pci.c
-index 5d1d076..bd01aa3 100644
--- a/drivers/atm/solos-pci.c
+++ b/drivers/atm/solos-pci.c
-@@ -452,7 +452,6 @@ static ssize_t console_show(struct device *dev, struct device_attribute *attr,
+@@ -42,7 +42,8 @@
+ #include <linux/swab.h>
+ #include <linux/slab.h>
- len = skb->len;
- memcpy(buf, skb->data, len);
-- dev_dbg(&card->dev->dev, "len: %d\n", len);
+-#define VERSION "0.07"
++#define VERSION "1.0"
++#define DRIVER_VERSION 0x01
+ #define PTAG "solos-pci"
- kfree_skb(skb);
- return len;
-From: Nathan Williams <nathan@traverse.com.au>
-To: netdev@vger.kernel.org
-Date: Wed, 05 Oct 2011 15:45:15 +1100
-Cc: linux-atm-general@lists.sourceforge.net,
- David Woodhouse <dwmw2@infradead.org>, linux-kernel@vger.kernel.org
-Subject: [Linux-ATM-General] [PATCH 3/4] atm: solos-pci: Add support for
- Geos GPIO pins
-
-Geos ADSL2+ routers have on-board Solos chipsets with some
-extra I/O pins and a push button connected to the FPGA.
-
-PCB version and variant numbers are also made available
-through the HardwareVersion and HardwareVariant attributes.
-
-Signed-off-by: Nathan Williams <nathan@traverse.com.au>
----
- drivers/atm/solos-pci.c | 98 +++++++++++++++++++++++++++++++++++++++++++++++
- 1 files changed, 98 insertions(+), 0 deletions(-)
-
-diff --git a/drivers/atm/solos-pci.c b/drivers/atm/solos-pci.c
-index bd01aa3..33c0c2b 100644
---- a/drivers/atm/solos-pci.c
-+++ b/drivers/atm/solos-pci.c
-@@ -56,6 +56,7 @@
+ #define CONFIG_RAM_SIZE 128
+@@ -56,16 +57,21 @@
#define FLASH_BUSY 0x60
#define FPGA_MODE 0x5C
#define FLASH_MODE 0x58
+#define GPIO_STATUS 0x54
++#define DRIVER_VER 0x50
#define TX_DMA_ADDR(port) (0x40 + (4 * (port)))
#define RX_DMA_ADDR(port) (0x30 + (4 * (port)))
-@@ -498,6 +499,87 @@ static ssize_t console_store(struct device *dev, struct device_attribute *attr,
+ #define DATA_RAM_SIZE 32768
+ #define BUF_SIZE 2048
+ #define OLD_BUF_SIZE 4096 /* For FPGA versions <= 2*/
+-#define FPGA_PAGE 528 /* FPGA flash page size*/
+-#define SOLOS_PAGE 512 /* Solos flash page size*/
+-#define FPGA_BLOCK (FPGA_PAGE * 8) /* FPGA flash block size*/
+-#define SOLOS_BLOCK (SOLOS_PAGE * 8) /* Solos flash block size*/
++/* Old boards use ATMEL AD45DB161D flash */
++#define ATMEL_FPGA_PAGE 528 /* FPGA flash page size*/
++#define ATMEL_SOLOS_PAGE 512 /* Solos flash page size*/
++#define ATMEL_FPGA_BLOCK (ATMEL_FPGA_PAGE * 8) /* FPGA block size*/
++#define ATMEL_SOLOS_BLOCK (ATMEL_SOLOS_PAGE * 8) /* Solos block size*/
++/* Current boards use M25P/M25PE SPI flash */
++#define SPI_FLASH_BLOCK (256 * 64)
+
+ #define RX_BUF(card, nr) ((card->buffers) + (nr)*(card->buffer_size)*2)
+ #define TX_BUF(card, nr) ((card->buffers) + (nr)*(card->buffer_size)*2 + (card->buffer_size))
+@@ -127,6 +133,7 @@ struct solos_card {
+ int using_dma;
+ int fpga_version;
+ int buffer_size;
++ int atmel_flash;
+ };
+
+
+@@ -452,7 +459,6 @@ static ssize_t console_show(struct devic
+
+ len = skb->len;
+ memcpy(buf, skb->data, len);
+- dev_dbg(&card->dev->dev, "len: %d\n", len);
+
+ kfree_skb(skb);
+ return len;
+@@ -499,6 +505,87 @@ static ssize_t console_store(struct devi
return err?:count;
}
static DEVICE_ATTR(console, 0644, console_show, console_store);
-@@ -506,6 +588,14 @@ static DEVICE_ATTR(console, 0644, console_show, console_store);
+@@ -507,6 +594,14 @@ static DEVICE_ATTR(console, 0644, consol
#include "solos-attrlist.c"
#undef SOLOS_ATTR_RO
#undef SOLOS_ATTR_RW
-@@ -514,6 +604,14 @@ static DEVICE_ATTR(console, 0644, console_show, console_store);
+@@ -515,6 +610,14 @@ static DEVICE_ATTR(console, 0644, consol
static struct attribute *solos_attrs[] = {
#include "solos-attrlist.c"
NULL
};
-From: Nathan Williams <nathan@traverse.com.au>
-To: netdev@vger.kernel.org
-Date: Wed, 05 Oct 2011 15:46:08 +1100
-Cc: linux-atm-general@lists.sourceforge.net,
- David Woodhouse <dwmw2@infradead.org>, linux-kernel@vger.kernel.org
-Subject: [Linux-ATM-General] [PATCH 4/4] atm: solos-pci: M25P/M25PE SPI
- flash support
-
-Newer Geos ADSL2+ routers have different SPI flash.
-The FPGA on these boards require driver version = 1 to enable
-flash upgrades so old drivers can't corrupt new boards.
-
-Signed-off-by: Nathan Williams <nathan@traverse.com.au>
----
- drivers/atm/solos-pci.c | 51 ++++++++++++++++++++++++++++++++++++----------
- 1 files changed, 40 insertions(+), 11 deletions(-)
-
-diff --git a/drivers/atm/solos-pci.c b/drivers/atm/solos-pci.c
-index 33c0c2b..2a75bf7 100644
---- a/drivers/atm/solos-pci.c
-+++ b/drivers/atm/solos-pci.c
-@@ -42,7 +42,8 @@
- #include <linux/swab.h>
- #include <linux/slab.h>
-
--#define VERSION "0.07"
-+#define VERSION "1.0"
-+#define DRIVER_VERSION 0x01
- #define PTAG "solos-pci"
-
- #define CONFIG_RAM_SIZE 128
-@@ -57,16 +58,20 @@
- #define FPGA_MODE 0x5C
- #define FLASH_MODE 0x58
- #define GPIO_STATUS 0x54
-+#define DRIVER_VER 0x50
- #define TX_DMA_ADDR(port) (0x40 + (4 * (port)))
- #define RX_DMA_ADDR(port) (0x30 + (4 * (port)))
-
- #define DATA_RAM_SIZE 32768
- #define BUF_SIZE 2048
- #define OLD_BUF_SIZE 4096 /* For FPGA versions <= 2*/
--#define FPGA_PAGE 528 /* FPGA flash page size*/
--#define SOLOS_PAGE 512 /* Solos flash page size*/
--#define FPGA_BLOCK (FPGA_PAGE * 8) /* FPGA flash block size*/
--#define SOLOS_BLOCK (SOLOS_PAGE * 8) /* Solos flash block size*/
-+/* Old boards use ATMEL AD45DB161D flash */
-+#define ATMEL_FPGA_PAGE 528 /* FPGA flash page size*/
-+#define ATMEL_SOLOS_PAGE 512 /* Solos flash page size*/
-+#define ATMEL_FPGA_BLOCK (ATMEL_FPGA_PAGE * 8) /* FPGA block size*/
-+#define ATMEL_SOLOS_BLOCK (ATMEL_SOLOS_PAGE * 8) /* Solos block size*/
-+/* Current boards use M25P/M25PE SPI flash */
-+#define SPI_FLASH_BLOCK (256 * 64)
-
- #define RX_BUF(card, nr) ((card->buffers) + (nr)*(card->buffer_size)*2)
- #define TX_BUF(card, nr) ((card->buffers) + (nr)*(card->buffer_size)*2 + (card->buffer_size))
-@@ -128,6 +133,7 @@ struct solos_card {
- int using_dma;
- int fpga_version;
- int buffer_size;
-+ int atmel_flash;
- };
-
-
-@@ -631,16 +637,25 @@ static int flash_upgrade(struct solos_card *card, int chip)
+@@ -534,16 +637,25 @@ static int flash_upgrade(struct solos_ca
switch (chip) {
case 0:
fw_name = "solos-FPGA.bin";
} else {
dev_info(&card->dev->dev, "FPGA version doesn't support"
" daughter board upgrades\n");
-@@ -650,7 +665,10 @@ static int flash_upgrade(struct solos_card *card, int chip)
+@@ -553,7 +665,10 @@ static int flash_upgrade(struct solos_ca
case 3:
if (card->fpga_version > LEGACY_BUFFERS){
fw_name = "solos-Firmware.bin";
} else {
dev_info(&card->dev->dev, "FPGA version doesn't support"
" daughter board upgrades\n");
-@@ -695,9 +713,13 @@ static int flash_upgrade(struct solos_card *card, int chip)
+@@ -598,9 +713,13 @@ static int flash_upgrade(struct solos_ca
/* dev_info(&card->dev->dev, "Set FPGA Flash mode to Block Write\n"); */
iowrite32(((chip * 2) + 1), card->config_regs + FLASH_MODE);
if(card->fpga_version > LEGACY_BUFFERS)
iowrite32(word, FLASH_BUF + i);
else
-@@ -1249,6 +1271,11 @@ static int fpga_probe(struct pci_dev *dev, const struct pci_device_id *id)
+@@ -1152,6 +1271,11 @@ static int fpga_probe(struct pci_dev *de
db_fpga_upgrade = db_firmware_upgrade = 0;
}
if (card->fpga_version >= DMA_SUPPORTED){
card->using_dma = 1;
} else {
-@@ -1256,6 +1283,8 @@ static int fpga_probe(struct pci_dev *dev, const struct pci_device_id *id)
+@@ -1159,6 +1283,8 @@ static int fpga_probe(struct pci_dev *de
/* Set RX empty flag for all ports */
iowrite32(0xF0, card->config_regs + FLAGS_ADDR);
}
ifeq ($(CONFIG_TUNE_CELL),y)
KBUILD_CFLAGS += $(call cc-option,-mtune=cell)
-
ifeq ($(CONFIG_TUNE_CELL),y)
KBUILD_CFLAGS += $(call cc-option,-mtune=cell)
-
--- a/kernel/module.c
+++ b/kernel/module.c
-@@ -2286,12 +2286,15 @@
+@@ -2283,12 +2283,15 @@ static void dynamic_debug_remove(struct
void * __weak module_alloc(unsigned long size)
{
ifeq ($(CONFIG_TUNE_CELL),y)
KBUILD_CFLAGS += $(call cc-option,-mtune=cell)
-
--- a/kernel/module.c
+++ b/kernel/module.c
-@@ -2322,12 +2322,15 @@
+@@ -2322,12 +2322,15 @@ static void dynamic_debug_remove(struct
void * __weak module_alloc(unsigned long size)
{
projects / oweals / openwrt.git / commitdiff