implemetation.
CONFIG_SYS_FSL_DDR2
- Board config to use DDR2. It can be eanbeld for SoCs with
+ Board config to use DDR2. It can be enabled for SoCs with
Freescale DDR2 or DDR3 controllers, depending on the board
implementation.
Say Y here to boot in secure mode by default even if non-secure mode
is supported. This option is useful to boot kernels which do not
suppport booting in non-secure mode. Only set this if you need it.
- This can be overriden at run-time by setting the bootm_boot_mode env.
+ This can be overridden at run-time by setting the bootm_boot_mode env.
variable to "sec" or "nonsec".
config ARMV7_VIRT
during U-boot booting.However the MC, DPC and DPL can be applied from
console independently.
The variable needs to be set from the console once and then on
- rebooting the parameters set in the varible will automatically be
+ rebooting the parameters set in the variable will automatically be
executed. The commmand is demostrated taking an example of mc boot
using NOR Flash i.e. MC, DPL, and DPC is stored in the NOR flash:
writel(tmp, &crlapb_base->cpu_r5_ctrl);
/* Give some delay for clock
- * to propogate */
+ * to propagate */
udelay(0x500);
}
cr_setting++;
}
- /* perform default PHY settings (may be overriden by custom settings */
+ /* perform default PHY settings (may be overridden by custom settings */
phy_setting = default_phy_settings;
while (phy_setting->phy_rnum >= 0) {
writel(phy_setting->setting,
/*
* Hooks to allow boards to set up the pinmux for a specific function.
* Has to be implemented in the board files as we don't yet support pinmux
- * setup from FTD. If a board file does not implement one of those functions
+ * setup from FDT. If a board file does not implement one of those functions
* an empty stub function will be called.
*/
* @param p post divider(DIVP)
* @param cpcon base PLL charge pump(CPCON)
* @return 0 if ok, -1 on error (the requested PLL is incorrect and cannot
- * be overriden), 1 if PLL is already correct
+ * be overridden), 1 if PLL is already correct
*/
int clock_set_rate(enum clock_id clkid, u32 n, u32 m, u32 p, u32 cpcon);
/**
* Register a new display based on device tree configuration.
*
- * The frame buffer can be positioned by U-Boot or overriden by the fdt.
+ * The frame buffer can be positioned by U-Boot or overridden by the fdt.
* You should pass in the U-Boot address here, and check the contents of
* struct fdt_disp_config to see what was actually chosen.
*
* @param p post divider(DIVP)
* @param cpcon base PLL charge pump(CPCON)
* @return 0 if ok, -1 on error (the requested PLL is incorrect and cannot
- * be overriden), 1 if PLL is already correct
+ * be overridden), 1 if PLL is already correct
*/
int clock_set_rate(enum clock_id clkid, u32 n, u32 m, u32 p, u32 cpcon)
{
*/
int hold_cores_in_reset(int verbose)
{
- /* Default to no, overriden by 'y', 'yes', 'Y', 'Yes', or '1' */
+ /* Default to no, overridden by 'y', 'yes', 'Y', 'Yes', or '1' */
if (getenv_yesno("mp_holdoff") == 1) {
if (verbose) {
puts("Secondary cores are being held in reset.\n");
#endif
/*
- * Unless otherwise overriden, enable two 128MB cachable instruction regions
+ * Unless otherwise overridden, enable two 128MB cachable instruction regions
* at CONFIG_SYS_SDRAM_BASE and another 128MB cacheable instruction region covering
* NOR flash at CONFIG_SYS_FLASH_BASE. Disable all cacheable data regions.
*/
#ifndef __ASM_STATUS_LED_H__
#define __ASM_STATUS_LED_H__
-/* if not overriden */
+/* if not overridden */
#ifndef CONFIG_BOARD_SPECIFIC_LED
# if defined(CONFIG_8xx)
# include <mpc8xx.h>
sprintf((char *)buf, "0x%x", pnvramaddr);
setenv("pnvramaddr", (char *)buf);
- /* try to read rootfssize (ram image) from envrionment */
+ /* try to read rootfssize (ram image) from environment */
p = getenv("rootfssize");
if (p != NULL)
strict_strtoul(p, 16, &rootfssize);
/* we have only one module, half str should be OK */
popts->half_strength_driver_enable = 1;
- /* wrlvl values overriden as recommended by ddr init func */
+ /* wrlvl values overridden as recommended by ddr init func */
popts->wrlvl_override = 1;
popts->wrlvl_sample = 0xf;
popts->wrlvl_start = 0x6;
* i2c_init_board() - Board-specific I2C bus init
*
* This function is the default no-op implementation of I2C bus
- * initialization. This function can be overriden by board-specific
+ * initialization. This function can be overridden by board-specific
* implementation if needed.
*/
__weak
* env_aes_cbc_get_key() - Get AES-128-CBC key for the environment
*
* This function shall return 16-byte array containing AES-128 key used
- * to encrypt and decrypt the environment. This function must be overriden
+ * to encrypt and decrypt the environment. This function must be overridden
* by the implementer as otherwise the environment encryption will not
* work.
*/
The fields 'name' and 'size' are mandatory for every partition.
The field 'start' is optional.
- If field 'size' of the last partition is 0, the partiton is extended
+ If field 'size' of the last partition is 0, the partition is extended
up to the end of the device.
The fields 'uuid' and 'uuid_disk' are optional if CONFIG_RANDOM_UUID is
negligence in combination with ordinary bitrot. Sometimes this goes
by unnoticed, but often build errors will result. If nobody cares any
more to resolve such problems, then the code is really dead and will
-be removed from the U-Boot source tree. The remainders rest in piece
+be removed from the U-Boot source tree. The remainders rest in peace
in the imperishable depths of the git history. This document tries to
maintain a list of such former fellows, so archaeologists can check
easily if there is something they might want to dig for...
Why: As the 'mtest' command is no longer default, a number of platforms
have not opted to turn the command back on and thus provide unused
- defines (which are likely to be propogated to new platforms from
+ defines (which are likely to be propagated to new platforms from
copy/paste). Remove these defines when unused.
Who: Tom Rini <trini@ti.com>
* Description: This file includes subroutines which are related to
* programmed I/O and memory access. Included in this module
* are default functions that do nothing. For real uses these
-* functions will have to be overriden by the user library.
+* functions will have to be overridden by the user library.
*
****************************************************************************/
*/
#define HDR_REVERSE 0x00000800
-/* Propogate DNR property to SharedDesc */
+/* Propagate DNR property to SharedDesc */
#define HDR_PROP_DNR 0x00000800
/* JobDesc/SharedDesc share property */
* Write leveling start time
* The value use for the DQS_ADJUST for the first sample
* when write leveling is enabled. It probably needs to be
- * overriden per platform.
+ * overridden per platform.
*/
wrlvl_start = 0x8;
/*
else if (msg)
printf("No support for %s.\n", msg);
else
- printf("No FPGA suport!\n");
+ printf("No FPGA support!\n");
}
bool "Enable MMC controllers using Driver Model"
depends on DM
help
- This enables the MultiMediaCard (MMC) uclass which suports MMC and
+ This enables the MultiMediaCard (MMC) uclass which supports MMC and
Secure Digital I/O (SDIO) cards. Both removable (SD, micro-SD, etc.)
and non-removable (e.g. eMMC chip) devices are supported. These
appear as block devices in U-Boot and can support filesystems such
* counted, so we know the physical geometry. This enables us to make some
* important configuration decisions.
*
- * The return value of this function propogates directly back to this driver's
+ * The return value of this function propagates directly back to this driver's
* call to nand_scan(). Anything other than zero will cause this driver to
* tear everything down and declare failure.
*/
* Decode NAND parameters from the device tree
*
* @param blob Device tree blob
- * @param node Node containing "nand-flash" compatble node
+ * @param node Node containing "nand-flash" compatible node
* @return 0 if ok, -ve on error (FDT_ERR_...)
*/
static int fdt_decode_nand(const void *blob, int node, struct fdt_nand *config)
/* get memory resource */
iomem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!iomem) {
- dev_err(&pdev->dev, "failed to get usbss mem resourse\n");
+ dev_err(&pdev->dev, "failed to get usbss mem resource\n");
ret = -ENODEV;
goto err1;
}
/**
* Register a new display based on device tree configuration.
*
- * The frame buffer can be positioned by U-Boot or overriden by the fdt.
+ * The frame buffer can be positioned by U-Boot or overridden by the fdt.
* You should pass in the U-Boot address here, and check the contents of
* struct tegra_lcd_priv to see what was actually chosen.
*
#define CONFIG_PL011_CLOCK 24000000
#define CONFIG_PL01x_PORTS { (void *)MXS_UARTDBG_BASE }
#define CONFIG_CONS_INDEX 0
-/* Default baudrate can be overriden by board! */
+/* Default baudrate can be overridden by board! */
#ifndef CONFIG_BAUDRATE
#define CONFIG_BAUDRATE 115200
#endif
#define SDRAM_TAPDELAY 0x10000000
/*
- * PCI - no suport
+ * PCI - no support
*/
#undef CONFIG_PCI
int eth_setenv_enetaddr(const char *name, const uchar *enetaddr);
/**
- * eth_setenv_enetaddr_by_index() - set the MAC address envrionment variable
+ * eth_setenv_enetaddr_by_index() - set the MAC address environment variable
*
* This sets up an environment variable with the given MAC address (@enetaddr).
* The environment variable to be set is defined by <@base_name><@index>addr.
* (CONFIG_ENV_SIZE). This heuristics will result in
* unreasonably large numbers (and thus memory footprint) for
* big flash environments (>8,000 entries for 64 KB
- * envrionment size), so we clip it to a reasonable value.
+ * environment size), so we clip it to a reasonable value.
* On the other hand we need to add some more entries for free
* space when importing very small buffers. Both boundaries can
* be overwritten in the board config file if needed.
void eth_common_init(void);
/**
- * eth_setenv_enetaddr_by_index() - set the MAC address envrionment variable
+ * eth_setenv_enetaddr_by_index() - set the MAC address environment variable
*
* This sets up an environment variable with the given MAC address (@enetaddr).
* The environment variable to be set is defined by <@base_name><@index>addr.
* CONFIG_SYS_POST_ETH_LOOPS - Number of test loops. Each loop
* is tested with a different frame length. Starting with
* MAX_PACKET_LENGTH and going down to MIN_PACKET_LENGTH.
- * Defaults to 10 and can be overriden in the board config header.
+ * Defaults to 10 and can be overridden in the board config header.
*/
#include <post.h>
# Up to two entries are valid, in this case the redundant
# environment sector is assumed present.
# Notice, that the "Number of sectors" is not required on NOR and SPI-dataflash.
-# Futhermore, if the Flash sector size is ommitted, this value is assumed to
+# Futhermore, if the Flash sector size is omitted, this value is assumed to
# be the same as the Environment size, which is valid for NOR and SPI-dataflash
# NOR example
projects / oweals / u-boot.git / commitdiff