linkit-smart-7688.dtb
dtb-$(CONFIG_TARGET_AP121) += ap121.dtb
dtb-$(CONFIG_TARGET_AP143) += ap143.dtb
+dtb-$(CONFIG_TARGET_AP152) += ap152.dtb
dtb-$(CONFIG_TARGET_BOSTON) += img,boston.dtb
dtb-$(CONFIG_TARGET_MALTA) += mti,malta.dtb
dtb-$(CONFIG_TARGET_PIC32MZDASK) += pic32mzda_sk.dtb
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2018 Rosy Song <rosysong@rosinson.com>
+ */
+
+/dts-v1/;
+#include "qca956x.dtsi"
+
+/ {
+ model = "AP152 Reference Board";
+ compatible = "qca,ap152", "qca,qca956x";
+
+ aliases {
+ spi0 = &spi0;
+ serial0 = &uart0;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+};
+
+&gmac0 {
+ phy-mode = "sgmii";
+ status = "okay";
+};
+
+&xtal {
+ clock-frequency = <25000000>;
+};
+
+&uart0 {
+ clock-frequency = <25000000>;
+ status = "okay";
+};
+
+&spi0 {
+ spi-max-frequency = <25000000>;
+ status = "okay";
+ spi-flash@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "spi-flash";
+ memory-map = <0x9f000000 0x01000000>;
+ spi-max-frequency = <25000000>;
+ reg = <0>;
+ };
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2018 Rosy Song <rosysong@rosinson.com>
+ */
+
+#include "skeleton.dtsi"
+
+/ {
+ compatible = "qca,qca956x";
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu@0 {
+ device_type = "cpu";
+ compatible = "mips,mips74Kc";
+ reg = <0>;
+ };
+ };
+
+ clocks {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ xtal: xtal {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-output-names = "xtal";
+ };
+ };
+
+ ahb {
+ compatible = "simple-bus";
+ ranges;
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ apb {
+ compatible = "simple-bus";
+ ranges;
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ uart0: uart@18020000 {
+ compatible = "ns16550";
+ reg = <0x18020000 0x20>;
+ reg-shift = <2>;
+
+ status = "disabled";
+ };
+
+ gmac0: eth@0x19000000 {
+ compatible = "qca,ag956x-mac";
+ reg = <0x19000000 0x200>;
+ phy = <&phy0>;
+ phy-mode = "sgmii";
+
+ status = "disabled";
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ phy0: ethernet-phy@0 {
+ reg = <0>;
+ };
+ };
+ };
+ };
+
+ spi0: spi@1f000000 {
+ compatible = "qca,ar7100-spi";
+ reg = <0x1f000000 0x10>;
+
+ status = "disabled";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+};
help
This supports QCA/Atheros qca953x family SOCs.
+config SOC_QCA956X
+ bool
+ select MIPS_TUNE_74KC
+ select SUPPORTS_BIG_ENDIAN
+ select SUPPORTS_CPU_MIPS32_R1
+ select SUPPORTS_CPU_MIPS32_R2
+ help
+ This supports QCA/Atheros qca956x family SOCs.
+
choice
prompt "Board select"
bool "AP143 Reference Board"
select SOC_QCA953X
+config TARGET_AP152
+ bool "AP152 Reference Board"
+ select SOC_QCA956X
+
config BOARD_TPLINK_WDR4300
bool "TP-Link WDR4300 Board"
select SOC_AR934X
source "board/qca/ap121/Kconfig"
source "board/qca/ap143/Kconfig"
+source "board/qca/ap152/Kconfig"
source "board/tplink/wdr4300/Kconfig"
endmenu
obj-$(CONFIG_SOC_AR933X) += ar933x/
obj-$(CONFIG_SOC_AR934X) += ar934x/
obj-$(CONFIG_SOC_QCA953X) += qca953x/
+obj-$(CONFIG_SOC_QCA956X) += qca956x/
#define QCA956X_WMAC_BASE \
(AR71XX_APB_BASE + 0x00100000)
#define QCA956X_WMAC_SIZE 0x20000
+#define QCA956X_RTC_BASE \
+ (AR71XX_APB_BASE + 0x00107000)
+#define QCA956X_RTC_SIZE 0x1000
#define QCA956X_EHCI0_BASE 0x1b000000
#define QCA956X_EHCI1_BASE 0x1b400000
#define QCA956X_EHCI_SIZE 0x200
(AR71XX_APB_BASE + 0x00070000)
#define QCA956X_GMAC_SIZE 0x64
+#define QCA956X_SRIF_BASE \
+ (AR71XX_APB_BASE + 0x00116000)
+#define QCA956X_SRIF_SIZE 0x1000
+
/*
* DDR_CTRL block
*/
#define QCA953X_DDR_REG_CTL_CONF 0x108
#define QCA953X_DDR_REG_CONFIG3 0x15c
+#define QCA956X_DDR_REG_TAP_CTRL2 0x24
+#define QCA956X_DDR_REG_TAP_CTRL3 0x28
+#define QCA956X_DDR_REG_DDR2_CONFIG 0xb8
+#define QCA956X_DDR_REG_DDR2_EMR2 0xbc
+#define QCA956X_DDR_REG_DDR2_EMR3 0xc0
+#define QCA956X_DDR_REG_BURST 0xc4
+#define QCA956X_DDR_REG_BURST2 0xc8
+#define QCA956X_DDR_REG_TIMEOUT_MAX 0xcc
+#define QCA956X_DDR_REG_FSM_WAIT_CTRL 0xe4
+#define QCA956X_DDR_REG_CTL_CONF 0x108
+#define QCA956X_DDR_REG_DDR3_CONFIG 0x15c
+
/*
* PLL block
*/
#define QCA956X_PLL_DDR_CONFIG_REG 0x08
#define QCA956X_PLL_DDR_CONFIG1_REG 0x0c
#define QCA956X_PLL_CLK_CTRL_REG 0x10
+#define QCA956X_PLL_SWITCH_CLK_CTRL_REG 0x28
+#define QCA956X_PLL_ETH_XMII_CTRL_REG 0x30
+#define QCA956X_PLL_DDR_DIT_FRAC_REG 0x38
+#define QCA956X_PLL_DDR_DIT2_FRAC_REG 0x3c
+#define QCA956X_PLL_CPU_DIT_FRAC_REG 0x40
+#define QCA956X_PLL_CPU_DIT2_FRAC_REG 0x44
+#define QCA956X_PLL_ETH_SGMII_SERDES_REG 0x4c
#define QCA956X_PLL_CPU_CONFIG_REFDIV_SHIFT 12
#define QCA956X_PLL_CPU_CONFIG_REFDIV_MASK 0x1f
#define QCA955X_RESET_MBOX BIT(1)
#define QCA955X_RESET_I2S BIT(0)
+#define QCA956X_RESET_EXTERNAL BIT(28)
+#define QCA956X_RESET_FULL_CHIP BIT(24)
+#define QCA956X_RESET_GE1_MDIO BIT(23) /* Reserved in datasheet */
+#define QCA956X_RESET_GE0_MDIO BIT(22)
+#define QCA956X_RESET_GE1_MAC BIT(13) /* Reserved in datasheet */
+#define QCA956X_RESET_SGMII_ASSERT BIT(12)
+#define QCA956X_RESET_GE0_MAC BIT(9)
+#define QCA956X_RESET_SGMII BIT(8)
+#define QCA956X_RESET_SGMII_ANALOG BIT(2)
+#define QCA956X_RESET_SWITCH BIT(0)
+
#define AR933X_BOOTSTRAP_MDIO_GPIO_EN BIT(18)
#define AR933X_BOOTSTRAP_DDR2 BIT(13)
#define AR933X_BOOTSTRAP_EEPBUSY BIT(4)
#define QCA953X_GPIO_IN_MUX_UART0_SIN 9
#define QCA953X_GPIO_IN_MUX_SPI_DATA_IN 8
+#define QCA956X_GPIO(x) BIT(x)
+#define QCA956X_GPIO_MUX_MASK(x) (0xff << (x))
#define QCA956X_GPIO_OUT_MUX_GE0_MDO 32
#define QCA956X_GPIO_OUT_MUX_GE0_MDC 33
+#define QCA956X_GPIO_IN_MUX_UART0_SIN 0x12
+#define QCA956X_GPIO_OUT_MUX_UART0_SOUT 0x16
#define AR71XX_GPIO_COUNT 16
#define AR7240_GPIO_COUNT 18
#define QCA953X_SRIF_DPLL2_OUTDIV_SHIFT 13
#define QCA953X_SRIF_DPLL2_OUTDIV_MASK 0x7
+#define QCA956X_SRIF_BB_DPLL1_REG 0x180
+#define QCA956X_SRIF_BB_DPLL2_REG 0x184
+#define QCA956X_SRIF_BB_DPLL3_REG 0x188
+
+#define QCA956X_SRIF_CPU_DPLL1_REG 0xf00
+#define QCA956X_SRIF_CPU_DPLL2_REG 0xf04
+#define QCA956X_SRIF_CPU_DPLL3_REG 0xf08
+
+#define QCA956X_SRIF_DDR_DPLL1_REG 0xec0
+#define QCA956X_SRIF_DDR_DPLL2_REG 0xec4
+#define QCA956X_SRIF_DDR_DPLL3_REG 0xec8
+
+#define QCA956X_SRIF_PCIE_DPLL1_REG 0xc80
+#define QCA956X_SRIF_PCIE_DPLL2_REG 0xc84
+#define QCA956X_SRIF_PCIE_DPLL3_REG 0xc88
+
+#define QCA956X_SRIF_PMU1_REG 0xcc0
+#define QCA956X_SRIF_PMU2_REG 0xcc4
+
/*
* MII_CTRL block
*/
#define QCA955X_ETH_CFG_RGMII_EN BIT(0)
#define QCA955X_ETH_CFG_GE0_SGMII BIT(6)
+/*
+ * QCA956X GMAC Interface
+ */
+
+#define QCA956X_GMAC_REG_ETH_CFG 0x00
+#define QCA956X_GMAC_REG_SGMII_RESET 0x14
+#define QCA956X_GMAC_REG_SGMII_SERDES 0x18
+#define QCA956X_GMAC_REG_MR_AN_CTRL 0x1c
+#define QCA956X_GMAC_REG_SGMII_CONFIG 0x34
+#define QCA956X_GMAC_REG_SGMII_DEBUG 0x58
+
+#define QCA956X_ETH_CFG_GE0_SGMII BIT(6)
+
#endif /* __ASM_AR71XX_H */
/*
* Atheros AR71XX/AR724X/AR913X common definitions
*
+ * Copyright (C) 2018-2019 Rosy Song <rosysong@rosinson.com>
* Copyright (C) 2015-2016 Wills Wang <wills.wang@live.com>
* Copyright (C) 2008-2011 Gabor Juhos <juhosg@openwrt.org>
* Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
void ar934x_pll_init(const u16 cpu_mhz, const u16 ddr_mhz, const u16 ahb_mhz);
void ar934x_ddr_init(const u16 cpu_mhz, const u16 ddr_mhz, const u16 ahb_mhz);
+void qca956x_pll_init(void);
+void qca956x_ddr_init(void);
#endif /* __ASM_MACH_ATH79_H */
--- /dev/null
+# SPDX-License-Identifier: GPL-2.0+
+
+obj-y += cpu.o
+obj-y += clk.o
+obj-y += ddr.o qca956x-ddr-tap.o
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2019 Rosy Song <rosysong@rosinson.com>
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/addrspace.h>
+#include <asm/types.h>
+#include <mach/ar71xx_regs.h>
+#include <mach/ath79.h>
+#include <wait_bit.h>
+
+#define PLL_SRIF_DPLL2_KI_LSB 29
+#define PLL_SRIF_DPLL2_KI_MASK 0x60000000
+#define PLL_SRIF_DPLL2_KI_SET(x) \
+ (((x) << PLL_SRIF_DPLL2_KI_LSB) & PLL_SRIF_DPLL2_KI_MASK)
+#define PLL_SRIF_DPLL2_KD_LSB 25
+#define PLL_SRIF_DPLL2_KD_MASK 0x1e000000
+#define PLL_SRIF_DPLL2_KD_SET(x) \
+ (((x) << PLL_SRIF_DPLL2_KD_LSB) & PLL_SRIF_DPLL2_KD_MASK)
+#define PLL_SRIF_DPLL2_PLL_PWD_LSB 22
+#define PLL_SRIF_DPLL2_PLL_PWD_MASK 0x00400000
+#define PLL_SRIF_DPLL2_PLL_PWD_SET(x) \
+ (((x) << PLL_SRIF_DPLL2_PLL_PWD_LSB) & PLL_SRIF_DPLL2_PLL_PWD_MASK)
+#define PLL_SRIF_DPLL2_OUTDIV_LSB 19
+#define PLL_SRIF_DPLL2_OUTDIV_MASK 0x00380000
+#define PLL_SRIF_DPLL2_OUTDIV_SET(x) \
+ (((x) << PLL_SRIF_DPLL2_OUTDIV_LSB) & PLL_SRIF_DPLL2_OUTDIV_MASK)
+#define PLL_SRIF_DPLL2_PHASE_SHIFT_LSB 12
+#define PLL_SRIF_DPLL2_PHASE_SHIFT_MASK 0x0007f000
+#define PLL_SRIF_DPLL2_PHASE_SHIFT_SET(x) \
+ (((x) << PLL_SRIF_DPLL2_PHASE_SHIFT_LSB) & PLL_SRIF_DPLL2_PHASE_SHIFT_MASK)
+#define CPU_PLL_CONFIG_PLLPWD_LSB 30
+#define CPU_PLL_CONFIG_PLLPWD_MASK 0x40000000
+#define CPU_PLL_CONFIG_PLLPWD_SET(x) \
+ (((x) << CPU_PLL_CONFIG_PLLPWD_LSB) & CPU_PLL_CONFIG_PLLPWD_MASK)
+#define CPU_PLL_CONFIG_OUTDIV_LSB 19
+#define CPU_PLL_CONFIG_OUTDIV_MASK 0x00380000
+#define CPU_PLL_CONFIG_OUTDIV_SET(x) \
+ (((x) << CPU_PLL_CONFIG_OUTDIV_LSB) & CPU_PLL_CONFIG_OUTDIV_MASK)
+#define CPU_PLL_CONFIG_RANGE_LSB 17
+#define CPU_PLL_CONFIG_RANGE_MASK 0x00060000
+#define CPU_PLL_CONFIG_RANGE_SET(x) \
+ (((x) << CPU_PLL_CONFIG_RANGE_LSB) & CPU_PLL_CONFIG_RANGE_MASK)
+#define CPU_PLL_CONFIG_REFDIV_LSB 12
+#define CPU_PLL_CONFIG_REFDIV_MASK 0x0001f000
+#define CPU_PLL_CONFIG_REFDIV_SET(x) \
+ (((x) << CPU_PLL_CONFIG_REFDIV_LSB) & CPU_PLL_CONFIG_REFDIV_MASK)
+#define CPU_PLL_CONFIG1_NINT_LSB 18
+#define CPU_PLL_CONFIG1_NINT_MASK 0x07fc0000
+#define CPU_PLL_CONFIG1_NINT_SET(x) \
+ (((x) << CPU_PLL_CONFIG1_NINT_LSB) & CPU_PLL_CONFIG1_NINT_MASK)
+#define CPU_PLL_DITHER1_DITHER_EN_LSB 31
+#define CPU_PLL_DITHER1_DITHER_EN_MASK 0x80000000
+#define CPU_PLL_DITHER1_DITHER_EN_SET(x) \
+ (((x) << CPU_PLL_DITHER1_DITHER_EN_LSB) & CPU_PLL_DITHER1_DITHER_EN_MASK)
+#define CPU_PLL_DITHER1_UPDATE_COUNT_LSB 24
+#define CPU_PLL_DITHER1_UPDATE_COUNT_MASK 0x3f000000
+#define CPU_PLL_DITHER1_UPDATE_COUNT_SET(x) \
+ (((x) << CPU_PLL_DITHER1_UPDATE_COUNT_LSB) & CPU_PLL_DITHER1_UPDATE_COUNT_MASK)
+#define CPU_PLL_DITHER1_NFRAC_STEP_LSB 18
+#define CPU_PLL_DITHER1_NFRAC_STEP_MASK 0x00fc0000
+#define CPU_PLL_DITHER1_NFRAC_STEP_SET(x) \
+ (((x) << CPU_PLL_DITHER1_NFRAC_STEP_LSB) & CPU_PLL_DITHER1_NFRAC_STEP_MASK)
+#define CPU_PLL_DITHER1_NFRAC_MIN_LSB 0
+#define CPU_PLL_DITHER1_NFRAC_MIN_MASK 0x0003ffff
+#define CPU_PLL_DITHER1_NFRAC_MIN_SET(x) \
+ (((x) << CPU_PLL_DITHER1_NFRAC_MIN_LSB) & CPU_PLL_DITHER1_NFRAC_MIN_MASK)
+#define CPU_PLL_DITHER2_NFRAC_MAX_LSB 0
+#define CPU_PLL_DITHER2_NFRAC_MAX_MASK 0x0003ffff
+#define CPU_PLL_DITHER2_NFRAC_MAX_SET(x) \
+ (((x) << CPU_PLL_DITHER2_NFRAC_MAX_LSB) & CPU_PLL_DITHER2_NFRAC_MAX_MASK)
+#define DDR_PLL_CONFIG_PLLPWD_LSB 30
+#define DDR_PLL_CONFIG_PLLPWD_MASK 0x40000000
+#define DDR_PLL_CONFIG_PLLPWD_SET(x) \
+ (((x) << DDR_PLL_CONFIG_PLLPWD_LSB) & DDR_PLL_CONFIG_PLLPWD_MASK)
+#define DDR_PLL_CONFIG_OUTDIV_LSB 23
+#define DDR_PLL_CONFIG_OUTDIV_MASK 0x03800000
+#define DDR_PLL_CONFIG_OUTDIV_SET(x) \
+ (((x) << DDR_PLL_CONFIG_OUTDIV_LSB) & DDR_PLL_CONFIG_OUTDIV_MASK)
+#define DDR_PLL_CONFIG_RANGE_LSB 21
+#define DDR_PLL_CONFIG_RANGE_MASK 0x00600000
+#define DDR_PLL_CONFIG_RANGE_SET(x) \
+ (((x) << DDR_PLL_CONFIG_RANGE_LSB) & DDR_PLL_CONFIG_RANGE_MASK)
+#define DDR_PLL_CONFIG_REFDIV_LSB 16
+#define DDR_PLL_CONFIG_REFDIV_MASK 0x001f0000
+#define DDR_PLL_CONFIG_REFDIV_SET(x) \
+ (((x) << DDR_PLL_CONFIG_REFDIV_LSB) & DDR_PLL_CONFIG_REFDIV_MASK)
+#define DDR_PLL_CONFIG1_NINT_LSB 18
+#define DDR_PLL_CONFIG1_NINT_MASK 0x07fc0000
+#define DDR_PLL_CONFIG1_NINT_SET(x) \
+ (((x) << DDR_PLL_CONFIG1_NINT_LSB) & DDR_PLL_CONFIG1_NINT_MASK)
+#define DDR_PLL_DITHER1_DITHER_EN_LSB 31
+#define DDR_PLL_DITHER1_DITHER_EN_MASK 0x80000000
+#define DDR_PLL_DITHER1_DITHER_EN_SET(x) \
+ (((x) << DDR_PLL_DITHER1_DITHER_EN_LSB) & DDR_PLL_DITHER1_DITHER_EN_MASK)
+#define DDR_PLL_DITHER1_UPDATE_COUNT_LSB 27
+#define DDR_PLL_DITHER1_UPDATE_COUNT_MASK 0x78000000
+#define DDR_PLL_DITHER1_UPDATE_COUNT_SET(x) \
+ (((x) << DDR_PLL_DITHER1_UPDATE_COUNT_LSB) & DDR_PLL_DITHER1_UPDATE_COUNT_MASK)
+#define DDR_PLL_DITHER1_NFRAC_STEP_LSB 20
+#define DDR_PLL_DITHER1_NFRAC_STEP_MASK 0x07f00000
+#define DDR_PLL_DITHER1_NFRAC_STEP_SET(x) \
+ (((x) << DDR_PLL_DITHER1_NFRAC_STEP_LSB) & DDR_PLL_DITHER1_NFRAC_STEP_MASK)
+#define DDR_PLL_DITHER1_NFRAC_MIN_LSB 0
+#define DDR_PLL_DITHER1_NFRAC_MIN_MASK 0x0003ffff
+#define DDR_PLL_DITHER1_NFRAC_MIN_SET(x) \
+ (((x) << DDR_PLL_DITHER1_NFRAC_MIN_LSB) & DDR_PLL_DITHER1_NFRAC_MIN_MASK)
+#define DDR_PLL_DITHER2_NFRAC_MAX_LSB 0
+#define DDR_PLL_DITHER2_NFRAC_MAX_MASK 0x0003ffff
+#define DDR_PLL_DITHER2_NFRAC_MAX_SET(x) \
+ (((x) << DDR_PLL_DITHER2_NFRAC_MAX_LSB) & DDR_PLL_DITHER2_NFRAC_MAX_MASK)
+#define CPU_DDR_CLOCK_CONTROL_AHBCLK_FROM_DDRPLL_LSB 24
+#define CPU_DDR_CLOCK_CONTROL_AHBCLK_FROM_DDRPLL_MASK 0x01000000
+#define CPU_DDR_CLOCK_CONTROL_AHBCLK_FROM_DDRPLL_SET(x) \
+ (((x) << CPU_DDR_CLOCK_CONTROL_AHBCLK_FROM_DDRPLL_LSB) & CPU_DDR_CLOCK_CONTROL_AHBCLK_FROM_DDRPLL_MASK)
+#define CPU_DDR_CLOCK_CONTROL_CPU_DDR_CLK_FROM_CPUPLL_LSB 21
+#define CPU_DDR_CLOCK_CONTROL_CPU_DDR_CLK_FROM_CPUPLL_MASK 0x00200000
+#define CPU_DDR_CLOCK_CONTROL_CPU_DDR_CLK_FROM_CPUPLL_SET(x) \
+ (((x) << CPU_DDR_CLOCK_CONTROL_CPU_DDR_CLK_FROM_CPUPLL_LSB) & CPU_DDR_CLOCK_CONTROL_CPU_DDR_CLK_FROM_CPUPLL_MASK)
+#define CPU_DDR_CLOCK_CONTROL_CPU_DDR_CLK_FROM_DDRPLL_LSB 20
+#define CPU_DDR_CLOCK_CONTROL_CPU_DDR_CLK_FROM_DDRPLL_MASK 0x00100000
+#define CPU_DDR_CLOCK_CONTROL_CPU_DDR_CLK_FROM_DDRPLL_SET(x) \
+ (((x) << CPU_DDR_CLOCK_CONTROL_CPU_DDR_CLK_FROM_DDRPLL_LSB) & CPU_DDR_CLOCK_CONTROL_CPU_DDR_CLK_FROM_DDRPLL_MASK)
+#define CPU_DDR_CLOCK_CONTROL_AHB_POST_DIV_LSB 15
+#define CPU_DDR_CLOCK_CONTROL_AHB_POST_DIV_MASK 0x000f8000
+#define CPU_DDR_CLOCK_CONTROL_AHB_POST_DIV_SET(x) \
+ (((x) << CPU_DDR_CLOCK_CONTROL_AHB_POST_DIV_LSB) & CPU_DDR_CLOCK_CONTROL_AHB_POST_DIV_MASK)
+#define CPU_DDR_CLOCK_CONTROL_DDR_POST_DIV_LSB 10
+#define CPU_DDR_CLOCK_CONTROL_DDR_POST_DIV_MASK 0x00007c00
+#define CPU_DDR_CLOCK_CONTROL_DDR_POST_DIV_SET(x) \
+ (((x) << CPU_DDR_CLOCK_CONTROL_DDR_POST_DIV_LSB) & CPU_DDR_CLOCK_CONTROL_DDR_POST_DIV_MASK)
+#define CPU_DDR_CLOCK_CONTROL_CPU_POST_DIV_LSB 5
+#define CPU_DDR_CLOCK_CONTROL_CPU_POST_DIV_MASK 0x000003e0
+#define CPU_DDR_CLOCK_CONTROL_CPU_POST_DIV_SET(x) \
+ (((x) << CPU_DDR_CLOCK_CONTROL_CPU_POST_DIV_LSB) & CPU_DDR_CLOCK_CONTROL_CPU_POST_DIV_MASK)
+#define CPU_DDR_CLOCK_CONTROL_AHB_PLL_BYPASS_LSB 4
+#define CPU_DDR_CLOCK_CONTROL_AHB_PLL_BYPASS_MASK 0x00000010
+#define CPU_DDR_CLOCK_CONTROL_AHB_PLL_BYPASS_SET(x) \
+ (((x) << CPU_DDR_CLOCK_CONTROL_AHB_PLL_BYPASS_LSB) & CPU_DDR_CLOCK_CONTROL_AHB_PLL_BYPASS_MASK)
+#define CPU_DDR_CLOCK_CONTROL_DDR_PLL_BYPASS_LSB 3
+#define CPU_DDR_CLOCK_CONTROL_DDR_PLL_BYPASS_MASK 0x00000008
+#define CPU_DDR_CLOCK_CONTROL_DDR_PLL_BYPASS_SET(x) \
+ (((x) << CPU_DDR_CLOCK_CONTROL_DDR_PLL_BYPASS_LSB) & CPU_DDR_CLOCK_CONTROL_DDR_PLL_BYPASS_MASK)
+#define CPU_DDR_CLOCK_CONTROL_CPU_PLL_BYPASS_LSB 2
+#define CPU_DDR_CLOCK_CONTROL_CPU_PLL_BYPASS_MASK 0x00000004
+#define CPU_DDR_CLOCK_CONTROL_CPU_PLL_BYPASS_SET(x) \
+ (((x) << CPU_DDR_CLOCK_CONTROL_CPU_PLL_BYPASS_LSB) & CPU_DDR_CLOCK_CONTROL_CPU_PLL_BYPASS_MASK)
+
+#define CPU_PLL_CONFIG1_NINT_VAL CPU_PLL_CONFIG1_NINT_SET(0x1f)
+#define CPU_PLL_CONFIG_REF_DIV_VAL CPU_PLL_CONFIG_REFDIV_SET(0x1)
+#define CPU_PLL_CONFIG_RANGE_VAL CPU_PLL_CONFIG_RANGE_SET(0)
+#define CPU_PLL_CONFIG_OUT_DIV_VAL1 CPU_PLL_CONFIG_OUTDIV_SET(0)
+#define CPU_PLL_CONFIG_OUT_DIV_VAL2 CPU_PLL_CONFIG_OUTDIV_SET(0)
+#define CPU_PLL_DITHER1_VAL CPU_PLL_DITHER1_DITHER_EN_SET(0) | \
+ CPU_PLL_DITHER1_NFRAC_MIN_SET(0) | \
+ CPU_PLL_DITHER1_NFRAC_STEP_SET(0) | \
+ CPU_PLL_DITHER1_UPDATE_COUNT_SET(0x0)
+#define CPU_PLL_DITHER2_VAL CPU_PLL_DITHER2_NFRAC_MAX_SET(0x0)
+#define DDR_PLL_CONFIG1_NINT_VAL DDR_PLL_CONFIG1_NINT_SET(0x1a)
+#define DDR_PLL_CONFIG_REF_DIV_VAL DDR_PLL_CONFIG_REFDIV_SET(0x1)
+#define DDR_PLL_CONFIG_RANGE_VAL DDR_PLL_CONFIG_RANGE_SET(0)
+#define DDR_PLL_CONFIG_OUT_DIV_VAL1 DDR_PLL_CONFIG_OUTDIV_SET(0)
+#define DDR_PLL_CONFIG_OUT_DIV_VAL2 DDR_PLL_CONFIG_OUTDIV_SET(0)
+#define DDR_PLL_DITHER1_VAL DDR_PLL_DITHER1_DITHER_EN_SET(0) | \
+ DDR_PLL_DITHER1_NFRAC_MIN_SET(0) | \
+ DDR_PLL_DITHER1_NFRAC_STEP_SET(0) | \
+ DDR_PLL_DITHER1_UPDATE_COUNT_SET(0x0)
+#define DDR_PLL_DITHER2_VAL DDR_PLL_DITHER2_NFRAC_MAX_SET(0x0)
+#define AHB_CLK_FROM_DDR CPU_DDR_CLOCK_CONTROL_AHBCLK_FROM_DDRPLL_SET(0)
+#define CPU_AND_DDR_CLK_FROM_DDR \
+ CPU_DDR_CLOCK_CONTROL_CPU_DDR_CLK_FROM_DDRPLL_SET(0)
+#define CPU_AND_DDR_CLK_FROM_CPU \
+ CPU_DDR_CLOCK_CONTROL_CPU_DDR_CLK_FROM_CPUPLL_SET(0)
+#define CPU_DDR_CLOCK_CONTROL_AHB_DIV_VAL \
+ CPU_DDR_CLOCK_CONTROL_AHB_POST_DIV_SET(0x2)
+#define CPU_DDR_CLOCK_CONTROL_DDR_POST_DIV \
+ CPU_DDR_CLOCK_CONTROL_DDR_POST_DIV_SET(0)
+#define CPU_DDR_CLOCK_CONTROL_CPU_POST_DIV \
+ CPU_DDR_CLOCK_CONTROL_CPU_POST_DIV_SET(0)
+
+static inline void set_val(u32 _reg, u32 _mask, u32 _val)
+{
+ void __iomem *pll_regs = map_physmem(AR71XX_PLL_BASE,
+ AR71XX_PLL_SIZE, MAP_NOCACHE);
+ writel((readl(pll_regs + _reg) & (~(_mask))) | _val, pll_regs + _reg);
+}
+
+#define cpu_pll_set(_mask, _val) \
+ set_val(QCA956X_PLL_CPU_CONFIG_REG, _mask, _val)
+
+#define ddr_pll_set(_mask, _val) \
+ set_val(QCA956X_PLL_DDR_CONFIG_REG, _mask, _val)
+
+#define cpu_ddr_control_set(_mask, _val) \
+ set_val(QCA956X_PLL_CLK_CTRL_REG, _mask, _val)
+
+DECLARE_GLOBAL_DATA_PTR;
+
+static u32 qca956x_get_xtal(void)
+{
+ u32 val;
+
+ val = ath79_get_bootstrap();
+ if (val & QCA956X_BOOTSTRAP_REF_CLK_40)
+ return 40000000;
+ else
+ return 25000000;
+}
+
+int get_serial_clock(void)
+{
+ return qca956x_get_xtal();
+}
+
+void qca956x_pll_init(void)
+{
+ void __iomem *srif_regs = map_physmem(QCA956X_SRIF_BASE,
+ QCA956X_SRIF_SIZE, MAP_NOCACHE);
+ void __iomem *pll_regs = map_physmem(AR71XX_PLL_BASE,
+ AR71XX_PLL_SIZE, MAP_NOCACHE);
+
+ /* 8.16.2 Baseband DPLL2 */
+ writel(PLL_SRIF_DPLL2_KI_SET(2) | PLL_SRIF_DPLL2_KD_SET(0xa) |
+ PLL_SRIF_DPLL2_PLL_PWD_SET(1) | PLL_SRIF_DPLL2_OUTDIV_SET(1) |
+ PLL_SRIF_DPLL2_PHASE_SHIFT_SET(6), srif_regs + QCA956X_SRIF_BB_DPLL2_REG);
+
+ /* 8.16.2 PCIE DPLL2 */
+ writel(PLL_SRIF_DPLL2_KI_SET(2) | PLL_SRIF_DPLL2_KD_SET(0xa) |
+ PLL_SRIF_DPLL2_PLL_PWD_SET(1) | PLL_SRIF_DPLL2_OUTDIV_SET(3) |
+ PLL_SRIF_DPLL2_PHASE_SHIFT_SET(6), srif_regs + QCA956X_SRIF_PCIE_DPLL2_REG);
+
+ /* 8.16.2 DDR DPLL2 */
+ writel(PLL_SRIF_DPLL2_KI_SET(2) | PLL_SRIF_DPLL2_KD_SET(0xa) |
+ PLL_SRIF_DPLL2_PLL_PWD_SET(1) | PLL_SRIF_DPLL2_PHASE_SHIFT_SET(6),
+ srif_regs + QCA956X_SRIF_DDR_DPLL2_REG);
+
+ /* 8.16.2 CPU DPLL2 */
+ writel(PLL_SRIF_DPLL2_KI_SET(1) | PLL_SRIF_DPLL2_KD_SET(7) |
+ PLL_SRIF_DPLL2_PLL_PWD_SET(1) | PLL_SRIF_DPLL2_PHASE_SHIFT_SET(6),
+ srif_regs + QCA956X_SRIF_CPU_DPLL2_REG);
+
+ /* pll_bypass_set */
+ cpu_ddr_control_set(CPU_DDR_CLOCK_CONTROL_CPU_PLL_BYPASS_MASK,
+ CPU_DDR_CLOCK_CONTROL_CPU_PLL_BYPASS_SET(1));
+ cpu_ddr_control_set(CPU_DDR_CLOCK_CONTROL_DDR_PLL_BYPASS_MASK,
+ CPU_DDR_CLOCK_CONTROL_DDR_PLL_BYPASS_SET(1));
+ cpu_ddr_control_set(CPU_DDR_CLOCK_CONTROL_AHB_PLL_BYPASS_MASK,
+ CPU_DDR_CLOCK_CONTROL_AHB_PLL_BYPASS_SET(1));
+
+ /* init_cpu_pll */
+ cpu_pll_set(CPU_PLL_CONFIG_PLLPWD_MASK, CPU_PLL_CONFIG_PLLPWD_SET(1));
+ cpu_pll_set(CPU_PLL_CONFIG_REFDIV_MASK, CPU_PLL_CONFIG_REF_DIV_VAL);
+ cpu_pll_set(CPU_PLL_CONFIG_RANGE_MASK, CPU_PLL_CONFIG_RANGE_VAL);
+ cpu_pll_set(CPU_PLL_CONFIG_OUTDIV_MASK, CPU_PLL_CONFIG_OUT_DIV_VAL1);
+ set_val(QCA956X_PLL_CPU_CONFIG1_REG, CPU_PLL_CONFIG1_NINT_MASK, \
+ CPU_PLL_CONFIG1_NINT_VAL);
+
+ /* init_ddr_pll */
+ ddr_pll_set(DDR_PLL_CONFIG_PLLPWD_MASK, DDR_PLL_CONFIG_PLLPWD_SET(1));
+ ddr_pll_set(DDR_PLL_CONFIG_REFDIV_MASK, DDR_PLL_CONFIG_REF_DIV_VAL);
+ ddr_pll_set(DDR_PLL_CONFIG_RANGE_MASK, DDR_PLL_CONFIG_RANGE_VAL);
+ ddr_pll_set(DDR_PLL_CONFIG_OUTDIV_MASK, DDR_PLL_CONFIG_OUT_DIV_VAL1);
+ set_val(QCA956X_PLL_DDR_CONFIG1_REG, DDR_PLL_CONFIG1_NINT_MASK,
+ DDR_PLL_CONFIG1_NINT_VAL);
+
+ /* init_ahb_pll */
+ writel(CPU_DDR_CLOCK_CONTROL_AHB_DIV_VAL | AHB_CLK_FROM_DDR |
+ CPU_AND_DDR_CLK_FROM_DDR | CPU_AND_DDR_CLK_FROM_CPU |
+ CPU_DDR_CLOCK_CONTROL_DDR_POST_DIV | CPU_DDR_CLOCK_CONTROL_CPU_POST_DIV |
+ CPU_DDR_CLOCK_CONTROL_CPU_PLL_BYPASS_SET(1) |
+ CPU_DDR_CLOCK_CONTROL_DDR_PLL_BYPASS_SET(1) |
+ CPU_DDR_CLOCK_CONTROL_AHB_PLL_BYPASS_SET(1), pll_regs + QCA956X_PLL_CLK_CTRL_REG);
+
+ /* ddr_pll_dither_unset */
+ writel(DDR_PLL_DITHER1_VAL, pll_regs + QCA956X_PLL_DDR_DIT_FRAC_REG);
+ writel(DDR_PLL_DITHER2_VAL, pll_regs + QCA956X_PLL_DDR_DIT2_FRAC_REG);
+
+ /* cpu_pll_dither_unset */
+ writel(CPU_PLL_DITHER1_VAL, pll_regs + QCA956X_PLL_CPU_DIT_FRAC_REG);
+ writel(CPU_PLL_DITHER2_VAL, pll_regs + QCA956X_PLL_CPU_DIT2_FRAC_REG);
+
+ /* pll_pwd_unset */
+ cpu_pll_set(CPU_PLL_CONFIG_PLLPWD_MASK, CPU_PLL_CONFIG_PLLPWD_SET(0));
+ ddr_pll_set(DDR_PLL_CONFIG_PLLPWD_MASK, DDR_PLL_CONFIG_PLLPWD_SET(0));
+
+ /* outdiv_unset */
+ cpu_pll_set(CPU_PLL_CONFIG_OUTDIV_MASK, CPU_PLL_CONFIG_OUT_DIV_VAL2);
+ ddr_pll_set(DDR_PLL_CONFIG_OUTDIV_MASK, DDR_PLL_CONFIG_OUT_DIV_VAL2);
+
+ /* pll_bypass_unset */
+ cpu_ddr_control_set(CPU_DDR_CLOCK_CONTROL_CPU_PLL_BYPASS_MASK,
+ CPU_DDR_CLOCK_CONTROL_CPU_PLL_BYPASS_SET(0));
+ cpu_ddr_control_set(CPU_DDR_CLOCK_CONTROL_DDR_PLL_BYPASS_MASK,
+ CPU_DDR_CLOCK_CONTROL_DDR_PLL_BYPASS_SET(0));
+ cpu_ddr_control_set(CPU_DDR_CLOCK_CONTROL_AHB_PLL_BYPASS_MASK,
+ CPU_DDR_CLOCK_CONTROL_AHB_PLL_BYPASS_SET(0));
+
+ while (readl(pll_regs + QCA956X_PLL_CPU_CONFIG_REG) & 0x8000000)
+ /* NOP */;
+
+ while (readl(pll_regs + QCA956X_PLL_DDR_CONFIG_REG) & 0x8000000)
+ /* NOP */;
+}
+
+int get_clocks(void)
+{
+ void __iomem *regs;
+ u32 ref_rate, cpu_rate, ddr_rate, ahb_rate;
+ u32 out_div, ref_div, postdiv, nint, hfrac, lfrac, clk_ctrl;
+ u32 pll, cpu_pll, ddr_pll, misc;
+
+ /*
+ * QCA956x timer init workaround has to be applied right before setting
+ * up the clock. Else, there will be no jiffies
+ */
+ regs = map_physmem(AR71XX_RESET_BASE, AR71XX_RESET_SIZE,
+ MAP_NOCACHE);
+ misc = readl(regs + AR71XX_RESET_REG_MISC_INT_ENABLE);
+ misc |= MISC_INT_MIPS_SI_TIMERINT_MASK;
+ writel(misc, regs + AR71XX_RESET_REG_MISC_INT_ENABLE);
+
+ regs = map_physmem(AR71XX_PLL_BASE, AR71XX_PLL_SIZE,
+ MAP_NOCACHE);
+ pll = readl(regs + QCA956X_PLL_CPU_CONFIG_REG);
+ out_div = (pll >> QCA956X_PLL_CPU_CONFIG_OUTDIV_SHIFT) &
+ QCA956X_PLL_CPU_CONFIG_OUTDIV_MASK;
+ ref_div = (pll >> QCA956X_PLL_CPU_CONFIG_REFDIV_SHIFT) &
+ QCA956X_PLL_CPU_CONFIG_REFDIV_MASK;
+
+ pll = readl(regs + QCA956X_PLL_CPU_CONFIG1_REG);
+ nint = (pll >> QCA956X_PLL_CPU_CONFIG1_NINT_SHIFT) &
+ QCA956X_PLL_CPU_CONFIG1_NINT_MASK;
+ hfrac = (pll >> QCA956X_PLL_CPU_CONFIG1_NFRAC_H_SHIFT) &
+ QCA956X_PLL_CPU_CONFIG1_NFRAC_H_MASK;
+ lfrac = (pll >> QCA956X_PLL_CPU_CONFIG1_NFRAC_L_SHIFT) &
+ QCA956X_PLL_CPU_CONFIG1_NFRAC_L_MASK;
+
+ ref_rate = qca956x_get_xtal();
+
+ cpu_pll = nint * ref_rate / ref_div;
+ cpu_pll += (lfrac * ref_rate) / ((ref_div * 25) << 13);
+ cpu_pll += (hfrac >> 13) * ref_rate / ref_div;
+ cpu_pll /= (1 << out_div);
+
+ pll = readl(regs + QCA956X_PLL_DDR_CONFIG_REG);
+ out_div = (pll >> QCA956X_PLL_DDR_CONFIG_OUTDIV_SHIFT) &
+ QCA956X_PLL_DDR_CONFIG_OUTDIV_MASK;
+ ref_div = (pll >> QCA956X_PLL_DDR_CONFIG_REFDIV_SHIFT) &
+ QCA956X_PLL_DDR_CONFIG_REFDIV_MASK;
+ pll = readl(regs + QCA956X_PLL_DDR_CONFIG1_REG);
+ nint = (pll >> QCA956X_PLL_DDR_CONFIG1_NINT_SHIFT) &
+ QCA956X_PLL_DDR_CONFIG1_NINT_MASK;
+ hfrac = (pll >> QCA956X_PLL_DDR_CONFIG1_NFRAC_H_SHIFT) &
+ QCA956X_PLL_DDR_CONFIG1_NFRAC_H_MASK;
+ lfrac = (pll >> QCA956X_PLL_DDR_CONFIG1_NFRAC_L_SHIFT) &
+ QCA956X_PLL_DDR_CONFIG1_NFRAC_L_MASK;
+
+ ddr_pll = nint * ref_rate / ref_div;
+ ddr_pll += (lfrac * ref_rate) / ((ref_div * 25) << 13);
+ ddr_pll += (hfrac >> 13) * ref_rate / ref_div;
+ ddr_pll /= (1 << out_div);
+
+ clk_ctrl = readl(regs + QCA956X_PLL_CLK_CTRL_REG);
+
+ postdiv = (clk_ctrl >> QCA956X_PLL_CLK_CTRL_CPU_POST_DIV_SHIFT) &
+ QCA956X_PLL_CLK_CTRL_CPU_POST_DIV_MASK;
+
+ if (clk_ctrl & QCA956X_PLL_CLK_CTRL_CPU_PLL_BYPASS)
+ cpu_rate = ref_rate;
+ else if (clk_ctrl & QCA956X_PLL_CLK_CTRL_CPU_DDRCLK_FROM_CPUPLL)
+ cpu_rate = ddr_pll / (postdiv + 1);
+ else
+ cpu_rate = cpu_pll / (postdiv + 1);
+
+ postdiv = (clk_ctrl >> QCA956X_PLL_CLK_CTRL_DDR_POST_DIV_SHIFT) &
+ QCA956X_PLL_CLK_CTRL_DDR_POST_DIV_MASK;
+
+ if (clk_ctrl & QCA956X_PLL_CLK_CTRL_DDR_PLL_BYPASS)
+ ddr_rate = ref_rate;
+ else if (clk_ctrl & QCA956X_PLL_CLK_CTRL_CPU_DDRCLK_FROM_DDRPLL)
+ ddr_rate = cpu_pll / (postdiv + 1);
+ else
+ ddr_rate = ddr_pll / (postdiv + 1);
+
+ postdiv = (clk_ctrl >> QCA956X_PLL_CLK_CTRL_AHB_POST_DIV_SHIFT) &
+ QCA956X_PLL_CLK_CTRL_AHB_POST_DIV_MASK;
+
+ if (clk_ctrl & QCA956X_PLL_CLK_CTRL_AHB_PLL_BYPASS)
+ ahb_rate = ref_rate;
+ else if (clk_ctrl & QCA956X_PLL_CLK_CTRL_AHBCLK_FROM_DDRPLL)
+ ahb_rate = ddr_pll / (postdiv + 1);
+ else
+ ahb_rate = cpu_pll / (postdiv + 1);
+
+ gd->cpu_clk = cpu_rate;
+ gd->mem_clk = ddr_rate;
+ gd->bus_clk = ahb_rate;
+
+ debug("cpu_clk=%u, ddr_clk=%u, bus_clk=%u\n",
+ cpu_rate, ddr_rate, ahb_rate);
+
+ return 0;
+}
+
+ulong get_bus_freq(ulong dummy)
+{
+ if (!gd->bus_clk)
+ get_clocks();
+ return gd->bus_clk;
+}
+
+ulong get_ddr_freq(ulong dummy)
+{
+ if (!gd->mem_clk)
+ get_clocks();
+ return gd->mem_clk;
+}
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2019 Rosy Song <rosysong@rosinson.com>
+ */
+
+#include <common.h>
+
+/* The lowlevel_init() is not needed on QCA956X */
+void lowlevel_init(void) {}
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2019 Rosy Song <rosysong@rosinson.com>
+ *
+ * Based on QSDK
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/addrspace.h>
+#include <asm/types.h>
+#include <mach/ar71xx_regs.h>
+#include <mach/ath79.h>
+
+#define DDR_FSM_WAIT_CTRL_VAL 0xa12
+#define DDR_CTL_CONFIG_SRAM_TSEL_LSB 30
+#define DDR_CTL_CONFIG_SRAM_TSEL_MASK 0xc0000000
+#define DDR_CTL_CONFIG_SRAM_TSEL_SET(x) \
+ (((x) << DDR_CTL_CONFIG_SRAM_TSEL_LSB) & DDR_CTL_CONFIG_SRAM_TSEL_MASK)
+#define DDR_CTL_CONFIG_GE0_SRAM_SYNC_LSB 20
+#define DDR_CTL_CONFIG_GE0_SRAM_SYNC_MASK 0x00100000
+#define DDR_CTL_CONFIG_GE0_SRAM_SYNC_SET(x) \
+ (((x) << DDR_CTL_CONFIG_GE0_SRAM_SYNC_LSB) & DDR_CTL_CONFIG_GE0_SRAM_SYNC_MASK)
+#define DDR_CTL_CONFIG_GE1_SRAM_SYNC_LSB 19
+#define DDR_CTL_CONFIG_GE1_SRAM_SYNC_MASK 0x00080000
+#define DDR_CTL_CONFIG_GE1_SRAM_SYNC_SET(x) \
+ (((x) << DDR_CTL_CONFIG_GE1_SRAM_SYNC_LSB) & DDR_CTL_CONFIG_GE1_SRAM_SYNC_MASK)
+#define DDR_CTL_CONFIG_USB_SRAM_SYNC_LSB 18
+#define DDR_CTL_CONFIG_USB_SRAM_SYNC_MASK 0x00040000
+#define DDR_CTL_CONFIG_USB_SRAM_SYNC_SET(x) \
+ (((x) << DDR_CTL_CONFIG_USB_SRAM_SYNC_LSB) & DDR_CTL_CONFIG_USB_SRAM_SYNC_MASK)
+#define DDR_CTL_CONFIG_PCIE_SRAM_SYNC_LSB 17
+#define DDR_CTL_CONFIG_PCIE_SRAM_SYNC_MASK 0x00020000
+#define DDR_CTL_CONFIG_PCIE_SRAM_SYNC_SET(x) \
+ (((x) << DDR_CTL_CONFIG_PCIE_SRAM_SYNC_LSB) & DDR_CTL_CONFIG_PCIE_SRAM_SYNC_MASK)
+#define DDR_CTL_CONFIG_WMAC_SRAM_SYNC_LSB 16
+#define DDR_CTL_CONFIG_WMAC_SRAM_SYNC_MASK 0x00010000
+#define DDR_CTL_CONFIG_WMAC_SRAM_SYNC_SET(x) \
+ (((x) << DDR_CTL_CONFIG_WMAC_SRAM_SYNC_LSB) & DDR_CTL_CONFIG_WMAC_SRAM_SYNC_MASK)
+#define DDR_CTL_CONFIG_MISC_SRC1_SRAM_SYNC_LSB 15
+#define DDR_CTL_CONFIG_MISC_SRC1_SRAM_SYNC_MASK 0x00008000
+#define DDR_CTL_CONFIG_MISC_SRC1_SRAM_SYNC_SET(x) \
+ (((x) << DDR_CTL_CONFIG_MISC_SRC1_SRAM_SYNC_LSB) & DDR_CTL_CONFIG_MISC_SRC1_SRAM_SYNC_MASK)
+#define DDR_CTL_CONFIG_MISC_SRC2_SRAM_SYNC_LSB 14
+#define DDR_CTL_CONFIG_MISC_SRC2_SRAM_SYNC_MASK 0x00004000
+#define DDR_CTL_CONFIG_MISC_SRC2_SRAM_SYNC_SET(x) \
+ (((x) << DDR_CTL_CONFIG_MISC_SRC2_SRAM_SYNC_LSB) & DDR_CTL_CONFIG_MISC_SRC2_SRAM_SYNC_MASK)
+#define DDR_CTL_CONFIG_PAD_DDR2_SEL_LSB 6
+#define DDR_CTL_CONFIG_PAD_DDR2_SEL_MASK 0x00000040
+#define DDR_CTL_CONFIG_PAD_DDR2_SEL_SET(x) \
+ (((x) << DDR_CTL_CONFIG_PAD_DDR2_SEL_LSB) & DDR_CTL_CONFIG_PAD_DDR2_SEL_MASK)
+#define DDR_CTL_CONFIG_CPU_DDR_SYNC_LSB 2
+#define DDR_CTL_CONFIG_CPU_DDR_SYNC_MASK 0x00000004
+#define DDR_CTL_CONFIG_CPU_DDR_SYNC_SET(x) \
+ (((x) << DDR_CTL_CONFIG_CPU_DDR_SYNC_LSB) & DDR_CTL_CONFIG_CPU_DDR_SYNC_MASK)
+#define DDR_CTL_CONFIG_HALF_WIDTH_LSB 1
+#define DDR_CTL_CONFIG_HALF_WIDTH_MASK 0x00000002
+#define DDR_CTL_CONFIG_HALF_WIDTH_SET(x) \
+ (((x) << DDR_CTL_CONFIG_HALF_WIDTH_LSB) & DDR_CTL_CONFIG_HALF_WIDTH_MASK)
+#define DDR_CONFIG_CAS_LATENCY_MSB_LSB 31
+#define DDR_CONFIG_CAS_LATENCY_MSB_MASK 0x80000000
+#define DDR_CONFIG_CAS_LATENCY_MSB_SET(x) \
+ (((x) << DDR_CONFIG_CAS_LATENCY_MSB_LSB) & DDR_CONFIG_CAS_LATENCY_MSB_MASK)
+#define DDR_CONFIG_OPEN_PAGE_LSB 30
+#define DDR_CONFIG_OPEN_PAGE_MASK 0x40000000
+#define DDR_CONFIG_OPEN_PAGE_SET(x) \
+ (((x) << DDR_CONFIG_OPEN_PAGE_LSB) & DDR_CONFIG_OPEN_PAGE_MASK)
+#define DDR_CONFIG_CAS_LATENCY_LSB 27
+#define DDR_CONFIG_CAS_LATENCY_MASK 0x38000000
+#define DDR_CONFIG_CAS_LATENCY_SET(x) \
+ (((x) << DDR_CONFIG_CAS_LATENCY_LSB) & DDR_CONFIG_CAS_LATENCY_MASK)
+#define DDR_CONFIG_TMRD_LSB 23
+#define DDR_CONFIG_TMRD_MASK 0x07800000
+#define DDR_CONFIG_TMRD_SET(x) \
+ (((x) << DDR_CONFIG_TMRD_LSB) & DDR_CONFIG_TMRD_MASK)
+#define DDR_CONFIG_TRFC_LSB 17
+#define DDR_CONFIG_TRFC_MASK 0x007e0000
+#define DDR_CONFIG_TRFC_SET(x) \
+ (((x) << DDR_CONFIG_TRFC_LSB) & DDR_CONFIG_TRFC_MASK)
+#define DDR_CONFIG_TRRD_LSB 13
+#define DDR_CONFIG_TRRD_MASK 0x0001e000
+#define DDR_CONFIG_TRRD_SET(x) \
+ (((x) << DDR_CONFIG_TRRD_LSB) & DDR_CONFIG_TRRD_MASK)
+#define DDR_CONFIG_TRP_LSB 9
+#define DDR_CONFIG_TRP_MASK 0x00001e00
+#define DDR_CONFIG_TRP_SET(x) \
+ (((x) << DDR_CONFIG_TRP_LSB) & DDR_CONFIG_TRP_MASK)
+#define DDR_CONFIG_TRCD_LSB 5
+#define DDR_CONFIG_TRCD_MASK 0x000001e0
+#define DDR_CONFIG_TRCD_SET(x) \
+ (((x) << DDR_CONFIG_TRCD_LSB) & DDR_CONFIG_TRCD_MASK)
+#define DDR_CONFIG_TRAS_LSB 0
+#define DDR_CONFIG_TRAS_MASK 0x0000001f
+#define DDR_CONFIG_TRAS_SET(x) \
+ (((x) << DDR_CONFIG_TRAS_LSB) & DDR_CONFIG_TRAS_MASK)
+#define DDR_CONFIG2_HALF_WIDTH_LOW_LSB 31
+#define DDR_CONFIG2_HALF_WIDTH_LOW_MASK 0x80000000
+#define DDR_CONFIG2_HALF_WIDTH_LOW_SET(x) \
+ (((x) << DDR_CONFIG2_HALF_WIDTH_LOW_LSB) & DDR_CONFIG2_HALF_WIDTH_LOW_MASK)
+#define DDR_CONFIG2_SWAP_A26_A27_LSB 30
+#define DDR_CONFIG2_SWAP_A26_A27_MASK 0x40000000
+#define DDR_CONFIG2_SWAP_A26_A27_SET(x) \
+ (((x) << DDR_CONFIG2_SWAP_A26_A27_LSB) & DDR_CONFIG2_SWAP_A26_A27_MASK)
+#define DDR_CONFIG2_GATE_OPEN_LATENCY_LSB 26
+#define DDR_CONFIG2_GATE_OPEN_LATENCY_MASK 0x3c000000
+#define DDR_CONFIG2_GATE_OPEN_LATENCY_SET(x) \
+ (((x) << DDR_CONFIG2_GATE_OPEN_LATENCY_LSB) & DDR_CONFIG2_GATE_OPEN_LATENCY_MASK)
+#define DDR_CONFIG2_TWTR_LSB 21
+#define DDR_CONFIG2_TWTR_MASK 0x03e00000
+#define DDR_CONFIG2_TWTR_SET(x) \
+ (((x) << DDR_CONFIG2_TWTR_LSB) & DDR_CONFIG2_TWTR_MASK)
+#define DDR_CONFIG2_TRTP_LSB 17
+#define DDR_CONFIG2_TRTP_MASK 0x001e0000
+#define DDR_CONFIG2_TRTP_SET(x) \
+ (((x) << DDR_CONFIG2_TRTP_LSB) & DDR_CONFIG2_TRTP_MASK)
+#define DDR_CONFIG2_TRTW_LSB 12
+#define DDR_CONFIG2_TRTW_MASK 0x0001f000
+#define DDR_CONFIG2_TRTW_SET(x) \
+ (((x) << DDR_CONFIG2_TRTW_LSB) & DDR_CONFIG2_TRTW_MASK)
+#define DDR_CONFIG2_TWR_LSB 8
+#define DDR_CONFIG2_TWR_MASK 0x00000f00
+#define DDR_CONFIG2_TWR_SET(x) \
+ (((x) << DDR_CONFIG2_TWR_LSB) & DDR_CONFIG2_TWR_MASK)
+#define DDR_CONFIG2_CKE_LSB 7
+#define DDR_CONFIG2_CKE_MASK 0x00000080
+#define DDR_CONFIG2_CKE_SET(x) \
+ (((x) << DDR_CONFIG2_CKE_LSB) & DDR_CONFIG2_CKE_MASK)
+#define DDR_CONFIG2_CNTL_OE_EN_LSB 5
+#define DDR_CONFIG2_CNTL_OE_EN_MASK 0x00000020
+#define DDR_CONFIG2_CNTL_OE_EN_SET(x) \
+ (((x) << DDR_CONFIG2_CNTL_OE_EN_LSB) & DDR_CONFIG2_CNTL_OE_EN_MASK)
+#define DDR_CONFIG2_BURST_LENGTH_LSB 0
+#define DDR_CONFIG2_BURST_LENGTH_MASK 0x0000000f
+#define DDR_CONFIG2_BURST_LENGTH_SET(x) \
+ (((x) << DDR_CONFIG2_BURST_LENGTH_LSB) & DDR_CONFIG2_BURST_LENGTH_MASK)
+#define RST_BOOTSTRAP_ADDRESS 0x180600b0
+#define PMU2_SWREGMSB_LSB 22
+#define PMU2_SWREGMSB_MASK 0xffc00000
+#define PMU2_SWREGMSB_SET(x) \
+ (((x) << PMU2_SWREGMSB_LSB) & PMU2_SWREGMSB_MASK)
+#define PMU2_PGM_LSB 21
+#define PMU2_PGM_MASK 0x00200000
+#define PMU2_PGM_SET(x) \
+ (((x) << PMU2_PGM_LSB) & PMU2_PGM_MASK)
+
+#define CPU_DDR_SYNC_MODE DDR_CTL_CONFIG_CPU_DDR_SYNC_SET(0)
+
+/*
+* DDR2 DDR1
+* 0x40c3 25MHz 0x4186 25Mhz
+* 0x4138 40MHz 0x4270 40Mhz
+*/
+#define CFG_DDR2_REFRESH_VAL 0x40c3
+#define CFG_DDR2_CONFIG_VAL DDR_CONFIG_CAS_LATENCY_MSB_SET(0x1) | \
+ DDR_CONFIG_OPEN_PAGE_SET(0x1) | DDR_CONFIG_CAS_LATENCY_SET(0x4) | \
+ DDR_CONFIG_TMRD_SET(0x6) | DDR_CONFIG_TRFC_SET(0x16) | \
+ DDR_CONFIG_TRRD_SET(0x7) | DDR_CONFIG_TRP_SET(0xb) | \
+ DDR_CONFIG_TRCD_SET(0xb) | DDR_CONFIG_TRAS_SET(0)
+#define CFG_DDR2_CONFIG2_VAL DDR_CONFIG2_HALF_WIDTH_LOW_SET(0x1) | \
+ DDR_CONFIG2_SWAP_A26_A27_SET(0x0) | DDR_CONFIG2_GATE_OPEN_LATENCY_SET(0xa) | \
+ DDR_CONFIG2_TWTR_SET(0x16) | DDR_CONFIG2_TRTP_SET(0xa) | \
+ DDR_CONFIG2_TRTW_SET(0xe) | DDR_CONFIG2_TWR_SET(0x2) | \
+ DDR_CONFIG2_CKE_SET(0x1) | DDR_CONFIG2_CNTL_OE_EN_SET(0x1) | \
+ DDR_CONFIG2_BURST_LENGTH_SET(0x8)
+
+#define CFG_DDR2_CONFIG3_VAL 0x0000000e
+#define CFG_DDR2_EXT_MODE_VAL1 0x782
+#define CFG_DDR2_EXT_MODE_VAL2 0x402
+#define CFG_DDR2_MODE_VAL_INIT 0xb53
+#define CFG_DDR2_MODE_VAL 0xa53
+#define CFG_DDR2_TAP_VAL 0x10
+#define CFG_DDR2_EN_TWL_VAL 0x00001e91
+#define CFG_DDR2_RD_DATA_THIS_CYCLE_VAL_16 0xffff
+
+#define CFG_DDR_CTL_CONFIG DDR_CTL_CONFIG_SRAM_TSEL_SET(0x1) | \
+ DDR_CTL_CONFIG_GE0_SRAM_SYNC_SET(0x1) | \
+ DDR_CTL_CONFIG_GE1_SRAM_SYNC_SET(0x1) | \
+ DDR_CTL_CONFIG_USB_SRAM_SYNC_SET(0x1) | \
+ DDR_CTL_CONFIG_PCIE_SRAM_SYNC_SET(0x1) | \
+ DDR_CTL_CONFIG_WMAC_SRAM_SYNC_SET(0x1) | \
+ DDR_CTL_CONFIG_MISC_SRC1_SRAM_SYNC_SET(0x1) | \
+ DDR_CTL_CONFIG_MISC_SRC2_SRAM_SYNC_SET(0x1)
+
+DECLARE_GLOBAL_DATA_PTR;
+
+void qca956x_ddr_init(void)
+{
+ u32 ddr_config, ddr_config2, ddr_config3, mod_val, \
+ mod_val_init, cycle_val, tap_val, ctl_config;
+ void __iomem *ddr_regs = map_physmem(AR71XX_DDR_CTRL_BASE, AR71XX_DDR_CTRL_SIZE,
+ MAP_NOCACHE);
+ void __iomem *srif_regs = map_physmem(QCA956X_SRIF_BASE, QCA956X_SRIF_SIZE,
+ MAP_NOCACHE);
+
+ ddr_config = CFG_DDR2_CONFIG_VAL;
+ ddr_config2 = CFG_DDR2_CONFIG2_VAL;
+ ddr_config3 = CFG_DDR2_CONFIG3_VAL;
+ mod_val_init = CFG_DDR2_MODE_VAL_INIT;
+ mod_val = CFG_DDR2_MODE_VAL;
+ tap_val = CFG_DDR2_TAP_VAL;
+ cycle_val = CFG_DDR2_RD_DATA_THIS_CYCLE_VAL_16;
+ ctl_config = CFG_DDR_CTL_CONFIG | DDR_CTL_CONFIG_PAD_DDR2_SEL_SET(0x1) |
+ DDR_CTL_CONFIG_HALF_WIDTH_SET(0x1) | CPU_DDR_SYNC_MODE;
+
+ writel(0x10, ddr_regs + AR71XX_DDR_REG_CONTROL);
+ udelay(10);
+
+ writel(0x20, ddr_regs + AR71XX_DDR_REG_CONTROL);
+ udelay(10);
+
+ writel(ctl_config, ddr_regs + QCA956X_DDR_REG_CTL_CONF);
+ udelay(10);
+
+ writel(cycle_val, ddr_regs + AR71XX_DDR_REG_RD_CYCLE);
+ udelay(100);
+
+ writel(0x74444444, ddr_regs + QCA956X_DDR_REG_BURST);
+ udelay(100);
+
+ writel(0x44444444, ddr_regs + QCA956X_DDR_REG_BURST2);
+ udelay(100);
+
+ writel(DDR_FSM_WAIT_CTRL_VAL, ddr_regs + QCA956X_DDR_REG_FSM_WAIT_CTRL);
+ udelay(100);
+
+ writel(0xfffff, ddr_regs + QCA956X_DDR_REG_TIMEOUT_MAX);
+ udelay(100);
+
+ writel(ddr_config, ddr_regs + AR71XX_DDR_REG_CONFIG);
+ udelay(100);
+
+ writel(ddr_config2, ddr_regs + AR71XX_DDR_REG_CONFIG2);
+ udelay(100);
+
+ writel(ddr_config3, ddr_regs + QCA956X_DDR_REG_DDR3_CONFIG);
+ udelay(100);
+
+ writel(CFG_DDR2_EN_TWL_VAL, ddr_regs + QCA956X_DDR_REG_DDR2_CONFIG);
+ udelay(100);
+
+ writel(ddr_config2 | 0x80, ddr_regs + AR71XX_DDR_REG_CONFIG2); /* CKE Enable */
+ udelay(100);
+
+ writel(0x8, ddr_regs + AR71XX_DDR_REG_CONTROL); /* Precharge */
+ udelay(10);
+
+ writel(0, ddr_regs + QCA956X_DDR_REG_DDR2_EMR2);
+ writel(0x10, ddr_regs + AR71XX_DDR_REG_CONTROL); /* EMR2 */
+ udelay(10);
+
+ writel(0, ddr_regs + QCA956X_DDR_REG_DDR2_EMR3);
+ writel(0x20, ddr_regs + AR71XX_DDR_REG_CONTROL); /* EMR3 */
+ udelay(10);
+
+ /* EMR DLL enable, Reduced Driver Impedance control, Differential DQS disabled */
+ writel(CFG_DDR2_EXT_MODE_VAL2, ddr_regs + AR71XX_DDR_REG_EMR);
+ udelay(100);
+
+ writel(0x2, ddr_regs + AR71XX_DDR_REG_CONTROL); /* EMR write */
+ udelay(10);
+
+ writel(mod_val_init, ddr_regs + AR71XX_DDR_REG_MODE);
+ udelay(1000);
+
+ writel(0x1, ddr_regs + AR71XX_DDR_REG_CONTROL); /* MR Write */
+ udelay(10);
+
+ writel(0x8, ddr_regs + AR71XX_DDR_REG_CONTROL); /* Precharge */
+ udelay(10);
+
+ writel(0x4, ddr_regs + AR71XX_DDR_REG_CONTROL); /* Auto Refresh */
+ udelay(10);
+
+ writel(0x4, ddr_regs + AR71XX_DDR_REG_CONTROL); /* Auto Refresh */
+ udelay(10);
+
+ /* Issue MRS to remove DLL out-of-reset */
+ writel(mod_val, ddr_regs + AR71XX_DDR_REG_MODE);
+ udelay(100);
+
+ writel(0x1, ddr_regs + AR71XX_DDR_REG_CONTROL); /* MR write */
+ udelay(100);
+
+ writel(CFG_DDR2_EXT_MODE_VAL1, ddr_regs + AR71XX_DDR_REG_EMR);
+ udelay(100);
+
+ writel(0x2, ddr_regs + AR71XX_DDR_REG_CONTROL); /* EMR write */
+ udelay(100);
+
+ writel(CFG_DDR2_EXT_MODE_VAL2, ddr_regs + AR71XX_DDR_REG_EMR);
+ udelay(100);
+
+ writel(0x2, ddr_regs + AR71XX_DDR_REG_CONTROL); /* EMR write */
+ udelay(100);
+
+ writel(CFG_DDR2_REFRESH_VAL, ddr_regs + AR71XX_DDR_REG_REFRESH);
+ udelay(100);
+
+ writel(tap_val, ddr_regs + AR71XX_DDR_REG_TAP_CTRL0);
+ writel(tap_val, ddr_regs + AR71XX_DDR_REG_TAP_CTRL1);
+ writel(tap_val, ddr_regs + QCA956X_DDR_REG_TAP_CTRL2);
+ writel(tap_val, ddr_regs + QCA956X_DDR_REG_TAP_CTRL3);
+
+ writel(0x633c8176, srif_regs + QCA956X_SRIF_PMU1_REG);
+ /* Set DDR2 Voltage to 1.8 volts */
+ writel(PMU2_SWREGMSB_SET(0x40) | PMU2_PGM_SET(0x1),
+ srif_regs + QCA956X_SRIF_PMU2_REG);
+}
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2019 Rosy Song <rosysong@rosinson.com>
+ *
+ * Based on QSDK
+ */
+
+#include <config.h>
+#include <asm/asm.h>
+#include <asm/regdef.h>
+#include <asm/mipsregs.h>
+#include <asm/addrspace.h>
+#include <mach/ar71xx_regs.h>
+
+ .set noreorder
+
+LEAF(ddr_tap_tuning)
+ li a0, 0xbd001f00
+ sw zero, 0x0(a0) /* Place where the tap values are saved and used for SWEEP */
+ sw zero, 0x4(a0) /* Place where the number of passing taps are saved. */
+ sw zero, 0x14(a0) /* Place where the last pass tap value is stored */
+ li a1, 0xaa55aa55 /* Indicates that the First pass tap value is not found */
+ sw a1, 0x10(a0) /* Place where the First pass tap value is stored */
+ nop
+
+ li a0, CKSEG1ADDR(AR71XX_RESET_BASE) /* RESET_BASE_ADDRESS */
+ lw a1, 0x1c(a0) /* Reading the RST_RESET_ADDRESS */
+ li a2, 0x08000000 /* Setting the RST_RESET_RTC_RESET */
+ or a1, a1, a2
+ sw a1, 0x1c(a0)
+
+ li a3, 0xffffffff
+ xor a2, a2, a3
+ and a1, a1, a2
+ sw a1, 0x1c(a0) /* Taking the RTC out of RESET */
+ nop
+
+ li a0, CKSEG1ADDR(QCA956X_RTC_BASE) /* RTC_BASE_ADDRESS */
+ li a1, 0x1
+ sw a1, 0x0040(a0) /* RTC_SYNC_RESET_ADDRESS */
+
+ li a2, 0x2
+
+_poll_for_RTC_ON:
+ lw a1, 0x0044(a0) /* RTC_SYNC_STATUS_ADDRESS */
+ and a1, a2, a1
+ bne a1, a2, _poll_for_RTC_ON
+ nop
+
+_CHANGE_TAPS:
+ li t0, 0xbd001f00 /* Read the current value of the TAP for programming */
+ lw t1, 0x0(t0)
+ li t2, 0x00000000
+ or t3, t1, t2
+
+ li t0, 0xb8000000 /* DDR_BASE_ADDRESS */
+ sw t3, 0x1c(t0) /* TAP_CONTROL_0_ADDRESS */
+ sw t3, 0x20(t0) /* TAP_CONTROL_1_ADDRESS */
+ sw t3, 0x24(t0) /* TAP_CONTROL_2_ADDRESS */
+ sw t3, 0x28(t0) /* TAP_CONTROL_3_ADDRESS */
+
+ li t1, 0x00000010 /* Running the test 8 times */
+ sw t1, 0x0068(t0) /* PERF_COMP_ADDR_1_ADDRESS */
+
+ li t1, 0xfa5de83f /* 4 Row Address Bits, 4 Column Address Bits, 2 BA bits */
+ sw t1, 0x002c(t0) /* PERF_MASK_ADDR_0_ADDRESS */
+
+ li t1, 0x0000ffff
+ sw t1, 0x0070(t0) /* PERF_COMP_AHB_GE0_1_ADDRESS */
+
+ li t1, 0x0000ffff
+ sw t1, 0x0040(t0) /* PERF_COMP_AHB_GE1_0_ADDRESS */
+
+ li t1, 0x0000ffff
+ sw t1, 0x0078(t0) /* PERF_COMP_AHB_GE1_1_ADDRESS */
+
+ li t1, 0x0000ffff
+ sw t1, 0x0034(t0) /* PERF_MASK_AHB_GE0_0_ADDRESS */
+
+ li t1, 0x0000ffff
+ sw t1, 0x006c(t0) /* PERF_MASK_AHB_GE0_1_ADDRESS */
+
+ li t1, 0x0000ffff
+ sw t1, 0x003c(t0) /* PERF_MASK_AHB_GE1_0_ADDRESS */
+
+ li t1, 0x0000ffff
+ sw t1, 0x0074(t0) /* PERF_MASK_AHB_GE1_1_ADDRESS */
+
+ li t1, 0x0000ffff
+ sw t1, 0x0038(t0) /* PERF_COMP_AHB_GE0_0_ADDRESS */
+
+ li t1, 0x00000001
+ sw t1, 0x011c(t0) /* DDR_BIST_ADDRESS */
+
+ li t2, 0x1
+
+_bist_done_poll:
+ lw t1, 0x0120(t0) /* DDR_BIST_STATUS_ADDRESS */
+ and t1, t1, t2
+ bne t1, t2, _bist_done_poll
+ nop
+
+ lw t1, 0x0120(t0) /* DDR_BIST_STATUS_ADDRESS */
+ li t4, 0x000001fe
+ and t2, t1, t4
+ srl t2, t2, 0x1 /* no. of Pass Runs */
+
+ li t5, 0x00000000
+ sw t5, 0x011c(t0) /* DDR_BIST_ADDRESS - Stop the DDR BIST test */
+
+ li t5, 0x0001fe00
+ and t5, t5, t1
+ bnez t5, _iterate_tap /* This is a redundant compare but nevertheless - Comparing the FAILS */
+ nop
+
+ lw t1, 0x0068(t0) /* PERF_COMP_ADDR_1_ADDRESS */
+ li t3, 0x000001fe
+ and t3, t3, t1
+ srl t3, t3, 0x1 /* No. of runs in the config register. */
+ bne t3, t2, _iterate_tap
+ nop
+
+pass_tap:
+ li t0, 0xbd001f00
+ lw t1, 0x4(t0)
+ addiu t1, t1, 0x1
+ sw t1, 0x4(t0)
+
+ li t0, 0xbd001f10
+ lw t1, 0x0(t0)
+ li t2, 0xaa55aa55
+ beq t1, t2, _first_pass
+ nop
+
+ li t0, 0xbd001f00
+ lw t1, 0x0(t0)
+ li t0, 0xbd001f10
+ sw t1, 0x4(t0)
+ nop
+ b _iterate_tap
+ nop
+
+_first_pass:
+ li t0, 0xbd001f00
+ lw t1, 0x0(t0)
+ li t0, 0xbd001f10
+ sw t1, 0x0(t0)
+ sw t1, 0x4(t0)
+ nop
+
+_iterate_tap:
+ li t0, 0xbd001f00
+ lw t1, 0x0(t0)
+ li t2, 0x3f
+ beq t1, t2, _STOP_TEST
+ nop
+
+ addiu t1, t1, 0x1
+ sw t1, 0x0(t0)
+ nop
+ b _CHANGE_TAPS
+ nop
+
+_STOP_TEST:
+ li t0, 0xbd001f00
+ lw t1, 0x4(t0)
+ bnez t1, _load_center_tap
+ nop
+
+ li t3, 0x8 /* Default Tap to be used */
+ b _load_tap_into_reg
+ nop
+
+_load_center_tap:
+ li t0, 0xbd001f10
+ lw t1, 0x0(t0)
+ lw t2, 0x4(t0)
+ add t3, t1, t2
+ srl t3, t3, 0x1
+ li t4, 0x3f
+ and t3, t3, t4
+
+_load_tap_into_reg:
+ li t0, 0xb8000000
+ sw t3, 0x1c(t0) /* TAP_CONTROL_0_ADDRESS */
+ sw t3, 0x20(t0) /* TAP_CONTROL_1_ADDRESS */
+ sw t3, 0x24(t0) /* TAP_CONTROL_2_ADDRESS */
+ sw t3, 0x28(t0) /* TAP_CONTROL_3_ADDRESS */
+
+ nop
+ jr ra
+ nop
+ END(ddr_tap_tuning)
// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright (C) 2015-2016 Wills Wang <wills.wang@live.com>
+ * Copyright (C) 2018-2019 Rosy Song <rosysong@rosinson.com>
*/
#include <common.h>
#include <mach/ath79.h>
#include <mach/ar71xx_regs.h>
+/* QCA956X ETH_SGMII_SERDES Registers */
+#define SGMII_SERDES_RES_CALIBRATION_LSB 23
+#define SGMII_SERDES_RES_CALIBRATION_MASK 0x07800000
+#define SGMII_SERDES_RES_CALIBRATION_SET(x) \
+ (((x) << SGMII_SERDES_RES_CALIBRATION_LSB) & SGMII_SERDES_RES_CALIBRATION_MASK)
+#define SGMII_SERDES_CDR_BW_LSB 1
+#define SGMII_SERDES_CDR_BW_MASK 0x00000006
+#define SGMII_SERDES_CDR_BW_SET(x) \
+ (((x) << SGMII_SERDES_CDR_BW_LSB) & SGMII_SERDES_CDR_BW_MASK)
+#define SGMII_SERDES_TX_DR_CTRL_LSB 4
+#define SGMII_SERDES_TX_DR_CTRL_MASK 0x00000070
+#define SGMII_SERDES_TX_DR_CTRL_SET(x) \
+ (((x) << SGMII_SERDES_TX_DR_CTRL_LSB) & SGMII_SERDES_TX_DR_CTRL_MASK)
+#define SGMII_SERDES_PLL_BW_LSB 8
+#define SGMII_SERDES_PLL_BW_MASK 0x00000100
+#define SGMII_SERDES_PLL_BW_SET(x) \
+ (((x) << SGMII_SERDES_PLL_BW_LSB) & SGMII_SERDES_PLL_BW_MASK)
+#define SGMII_SERDES_EN_SIGNAL_DETECT_LSB 16
+#define SGMII_SERDES_EN_SIGNAL_DETECT_MASK 0x00010000
+#define SGMII_SERDES_EN_SIGNAL_DETECT_SET(x) \
+ (((x) << SGMII_SERDES_EN_SIGNAL_DETECT_LSB) & SGMII_SERDES_EN_SIGNAL_DETECT_MASK)
+#define SGMII_SERDES_FIBER_SDO_LSB 17
+#define SGMII_SERDES_FIBER_SDO_MASK 0x00020000
+#define SGMII_SERDES_FIBER_SDO_SET(x) \
+ (((x) << SGMII_SERDES_FIBER_SDO_LSB) & SGMII_SERDES_FIBER_SDO_MASK)
+#define SGMII_SERDES_VCO_REG_LSB 27
+#define SGMII_SERDES_VCO_REG_MASK 0x78000000
+#define SGMII_SERDES_VCO_REG_SET(x) \
+ (((x) << SGMII_SERDES_VCO_REG_LSB) & SGMII_SERDES_VCO_REG_MASK)
+#define SGMII_SERDES_VCO_FAST_LSB 9
+#define SGMII_SERDES_VCO_FAST_MASK 0x00000200
+#define SGMII_SERDES_VCO_FAST_GET(x) \
+ (((x) & SGMII_SERDES_VCO_FAST_MASK) >> SGMII_SERDES_VCO_FAST_LSB)
+#define SGMII_SERDES_VCO_SLOW_LSB 10
+#define SGMII_SERDES_VCO_SLOW_MASK 0x00000400
+#define SGMII_SERDES_VCO_SLOW_GET(x) \
+ (((x) & SGMII_SERDES_VCO_SLOW_MASK) >> SGMII_SERDES_VCO_SLOW_LSB)
+
void _machine_restart(void)
{
void __iomem *base;
return 0;
}
+static int qca956x_sgmii_cal(void)
+{
+ int i;
+ u32 reg, rev_sgmii_val;
+ u32 vco_fast, vco_slow;
+ u32 start_val = 0, end_val = 0;
+ void __iomem *gregs = map_physmem(AR71XX_MII_BASE, AR71XX_MII_SIZE,
+ MAP_NOCACHE);
+ void __iomem *pregs = map_physmem(AR71XX_PLL_BASE, AR71XX_PLL_SIZE,
+ MAP_NOCACHE);
+ void __iomem *rregs = map_physmem(AR71XX_RESET_BASE, AR71XX_RESET_SIZE,
+ MAP_NOCACHE);
+ const u32 mask = QCA956X_RESET_SGMII_ASSERT | QCA956X_RESET_SGMII;
+
+ writel(BIT(2) | BIT(0), pregs + QCA956X_PLL_ETH_SGMII_SERDES_REG);
+
+ reg = readl(gregs + QCA956X_GMAC_REG_SGMII_SERDES);
+ vco_fast = SGMII_SERDES_VCO_FAST_GET(reg);
+ vco_slow = SGMII_SERDES_VCO_SLOW_GET(reg);
+
+ /* Set resistor calibration from 0000 to 1111 */
+ for (i = 0; i < 0x10; i++) {
+ reg = (readl(gregs + QCA956X_GMAC_REG_SGMII_SERDES) &
+ ~SGMII_SERDES_RES_CALIBRATION_MASK) |
+ SGMII_SERDES_RES_CALIBRATION_SET(i);
+ writel(reg, gregs + QCA956X_GMAC_REG_SGMII_SERDES);
+
+ udelay(50);
+
+ reg = readl(gregs + QCA956X_GMAC_REG_SGMII_SERDES);
+ if (vco_fast != SGMII_SERDES_VCO_FAST_GET(reg) ||
+ vco_slow != SGMII_SERDES_VCO_SLOW_GET(reg)) {
+ if (start_val == 0) {
+ start_val = i;
+ end_val = i;
+ } else {
+ end_val = i;
+ }
+ }
+ vco_fast = SGMII_SERDES_VCO_FAST_GET(reg);
+ vco_slow = SGMII_SERDES_VCO_SLOW_GET(reg);
+ }
+
+ if (start_val == 0)
+ rev_sgmii_val = 0x7;
+ else
+ rev_sgmii_val = (start_val + end_val) >> 1;
+
+ writel((readl(gregs + QCA956X_GMAC_REG_SGMII_SERDES) &
+ ~SGMII_SERDES_RES_CALIBRATION_MASK) |
+ SGMII_SERDES_RES_CALIBRATION_SET(rev_sgmii_val),
+ gregs + QCA956X_GMAC_REG_SGMII_SERDES);
+
+ writel(BIT(2) | BIT(0), pregs + QCA956X_PLL_ETH_SGMII_SERDES_REG);
+
+ reg = readl(gregs + QCA956X_GMAC_REG_SGMII_SERDES);
+ writel(SGMII_SERDES_CDR_BW_SET(3) | SGMII_SERDES_TX_DR_CTRL_SET(1) |
+ SGMII_SERDES_PLL_BW_SET(1) | SGMII_SERDES_EN_SIGNAL_DETECT_SET(1) |
+ SGMII_SERDES_FIBER_SDO_SET(1) | SGMII_SERDES_VCO_REG_SET(3) | reg,
+ gregs + QCA956X_GMAC_REG_SGMII_SERDES);
+
+ setbits_be32(rregs + QCA956X_RESET_REG_RESET_MODULE, mask);
+ mdelay(1);
+ clrbits_be32(rregs + QCA956X_RESET_REG_RESET_MODULE, mask);
+ mdelay(1);
+
+ while (!(readl(gregs + QCA956X_GMAC_REG_SGMII_SERDES) & BIT(15)))
+ /* NOP */;
+
+ return 0;
+}
+
+static int qca956x_sgmii_setup(void)
+{
+ int i;
+ u32 s = 0, reg = 0;
+ u32 _regs[] = {
+ BIT(4), /* HW_RX_125M_N */
+ BIT(2), /* RX_125M_N */
+ BIT(3), /* TX_125M_N */
+ BIT(0), /* RX_CLK_N */
+ BIT(1), /* TX_CLK_N */
+ };
+ void __iomem *gregs = map_physmem(AR71XX_MII_BASE, AR71XX_MII_SIZE,
+ MAP_NOCACHE);
+
+ /* Force sgmii mode */
+ writel(BIT(6) | BIT(15) | BIT(8), gregs + QCA956X_GMAC_REG_MR_AN_CTRL);
+ udelay(10);
+ writel(0x2 | BIT(5) | (0x2 << 6), gregs + QCA956X_GMAC_REG_SGMII_CONFIG);
+
+ /* SGMII reset sequence sugguest by qca systems team. */
+ writel(0, gregs + QCA956X_GMAC_REG_SGMII_RESET);
+ for (i = 0; i < ARRAY_SIZE(_regs); i++) {
+ reg |= _regs[i];
+ writel(reg, gregs + QCA956X_GMAC_REG_SGMII_RESET);
+ }
+
+ writel(readl(gregs + QCA956X_GMAC_REG_MR_AN_CTRL) & ~BIT(15),
+ gregs + QCA956X_GMAC_REG_MR_AN_CTRL);
+
+ /*
+ * WARNING: Across resets SGMII link status goes to weird state.
+ * if 0xb8070058 (SGMII_DEBUG Register) reads other than 0xf or 0x10
+ * for sure we are in bad state.
+ * Issue a PHY RESET in MR_AN_CONTROL_ADDRESS to keep going.
+ */
+ i = 0;
+ s = (readl(gregs + QCA956X_GMAC_REG_SGMII_DEBUG) & 0xff);
+ while (!(s == 0xf || s == 0x10)) {
+ writel(readl(gregs + QCA956X_GMAC_REG_MR_AN_CTRL) | BIT(15),
+ gregs + QCA956X_GMAC_REG_MR_AN_CTRL);
+ udelay(100);
+ writel(readl(gregs + QCA956X_GMAC_REG_MR_AN_CTRL) & ~BIT(15),
+ gregs + QCA956X_GMAC_REG_MR_AN_CTRL);
+ if (i++ == 10)
+ break;
+ s = (readl(gregs + QCA956X_GMAC_REG_SGMII_DEBUG) & 0xff);
+ }
+
+ return 0;
+}
+
+static int qca956x_s17_reset(void)
+{
+ void __iomem *regs = map_physmem(AR71XX_GPIO_BASE, AR71XX_GPIO_SIZE,
+ MAP_NOCACHE);
+ void __iomem *rregs = map_physmem(AR71XX_RESET_BASE, AR71XX_RESET_SIZE,
+ MAP_NOCACHE);
+ const u32 mask = QCA956X_RESET_SGMII_ASSERT | QCA956X_RESET_SGMII |
+ QCA956X_RESET_EXTERNAL | QCA956X_RESET_SGMII_ANALOG |
+ QCA956X_RESET_SWITCH;
+ /* Bits(Reserved in datasheet) should be set to 1 */
+ const u32 mask_r = QCA956X_RESET_SGMII_ASSERT | QCA956X_RESET_SGMII |
+ QCA956X_RESET_EXTERNAL;
+
+ setbits_be32(rregs + QCA956X_RESET_REG_RESET_MODULE, mask);
+ mdelay(1);
+ clrbits_be32(rregs + QCA956X_RESET_REG_RESET_MODULE, mask_r);
+ mdelay(1);
+
+ /* Reset s17 switch(GPIO11) SYS_RST_L */
+ writel(readl(regs + AR71XX_GPIO_REG_OE) & ~BIT(11),
+ regs + AR71XX_GPIO_REG_OE);
+ udelay(100);
+
+ writel(readl(regs + AR71XX_GPIO_REG_OUT) & ~BIT(11),
+ regs + AR71XX_GPIO_REG_OUT);
+ udelay(100);
+ writel(readl(regs + AR71XX_GPIO_REG_OUT) | BIT(11),
+ regs + AR71XX_GPIO_REG_OUT);
+
+ return 0;
+}
+
+static int qca956x_init_mdio(void)
+{
+ u32 reg;
+ void __iomem *regs = map_physmem(AR71XX_GPIO_BASE, AR71XX_GPIO_SIZE,
+ MAP_NOCACHE);
+ void __iomem *rregs = map_physmem(AR71XX_RESET_BASE, AR71XX_RESET_SIZE,
+ MAP_NOCACHE);
+ const u32 mask = QCA956X_RESET_GE0_MDIO | QCA956X_RESET_GE0_MAC |
+ QCA956X_RESET_GE1_MDIO | QCA956X_RESET_GE1_MAC;
+
+ setbits_be32(rregs + QCA956X_RESET_REG_RESET_MODULE, mask);
+ mdelay(1);
+ clrbits_be32(rregs + QCA956X_RESET_REG_RESET_MODULE, mask);
+ mdelay(1);
+
+ /* GPIO4 as MDI */
+ reg = readl(regs + QCA956X_GPIO_REG_IN_ENABLE3);
+ reg &= ~(0xff << 16);
+ reg |= (0x4 << 16);
+ writel(reg, regs + QCA956X_GPIO_REG_IN_ENABLE3);
+
+ /* GPIO4 as MDO */
+ reg = readl(regs + QCA956X_GPIO_REG_OUT_FUNC1);
+ reg &= ~0xff;
+ reg |= 0x20;
+ writel(reg, regs + QCA956X_GPIO_REG_OUT_FUNC1);
+
+ /* Init MDC(GPIO3) / MDIO(GPIO4) */
+ reg = readl(regs + AR71XX_GPIO_REG_OE);
+ reg &= ~BIT(4);
+ writel(reg, regs + AR71XX_GPIO_REG_OE);
+ udelay(100);
+
+ reg = readl(regs + AR71XX_GPIO_REG_OE);
+ reg &= ~BIT(3);
+ writel(reg, regs + AR71XX_GPIO_REG_OE);
+ udelay(100);
+
+ /* GPIO3 as MDI */
+ reg = readl(regs + QCA956X_GPIO_REG_OUT_FUNC0);
+ reg &= ~(0xff << 24);
+ reg |= (0x21 << 24);
+ writel(reg, regs + QCA956X_GPIO_REG_OUT_FUNC0);
+
+ return 0;
+}
+
+static int eth_init_qca956x(void)
+{
+ void __iomem *pregs = map_physmem(AR71XX_PLL_BASE, AR71XX_PLL_SIZE,
+ MAP_NOCACHE);
+ void __iomem *gregs = map_physmem(AR71XX_MII_BASE, AR71XX_MII_SIZE,
+ MAP_NOCACHE);
+
+ qca956x_sgmii_cal();
+ qca956x_s17_reset();
+ qca956x_init_mdio();
+
+ if (ath79_get_bootstrap() & QCA956X_BOOTSTRAP_REF_CLK_40)
+ writel(0x45500, pregs + QCA956X_PLL_SWITCH_CLK_CTRL_REG);
+ else
+ writel(0xc5200, pregs + QCA956X_PLL_SWITCH_CLK_CTRL_REG);
+
+ qca956x_sgmii_setup();
+
+ writel((3 << 16) | (3 << 14) | (1 << 0) | (1 << 6),
+ gregs + QCA956X_GMAC_REG_ETH_CFG);
+
+ writel((1 << 31) | (2 << 28) | (2 << 26) | (1 << 25),
+ pregs + QCA956X_PLL_ETH_XMII_CTRL_REG);
+ mdelay(1);
+
+ return 0;
+}
+
int ath79_eth_reset(void)
{
/*
return eth_init_ar934x();
if (soc_is_qca953x())
return eth_init_qca953x();
+ if (soc_is_qca956x())
+ return eth_init_qca956x();
return -EINVAL;
}
--- /dev/null
+if TARGET_AP152
+
+config SYS_VENDOR
+ default "qca"
+
+config SYS_BOARD
+ default "ap152"
+
+config SYS_CONFIG_NAME
+ default "ap152"
+
+config SYS_TEXT_BASE
+ default 0x9f000000
+
+endif
--- /dev/null
+AP152 BOARD
+M: Rosy Song <rosysong@rosinson.com>
+S: Maintained
+F: board/qca/ap152/
+F: include/configs/ap152.h
+F: configs/ap152_defconfig
--- /dev/null
+# SPDX-License-Identifier: GPL-2.0+
+
+obj-y = ap152.o
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2018 Rosy Song <rosysong@rosinson.com>
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/addrspace.h>
+#include <asm/types.h>
+#include <mach/ar71xx_regs.h>
+#include <mach/ddr.h>
+#include <mach/ath79.h>
+#include <debug_uart.h>
+
+#define RST_RESET_RTC_RESET_LSB 27
+#define RST_RESET_RTC_RESET_MASK 0x08000000
+#define RST_RESET_RTC_RESET_SET(x) \
+ (((x) << RST_RESET_RTC_RESET_LSB) & RST_RESET_RTC_RESET_MASK)
+
+#ifdef CONFIG_DEBUG_UART_BOARD_INIT
+void board_debug_uart_init(void)
+{
+ void __iomem *regs;
+ u32 val;
+
+ regs = map_physmem(AR71XX_GPIO_BASE, AR71XX_GPIO_SIZE,
+ MAP_NOCACHE);
+
+ /* UART : RX18, TX22 done
+ * GPIO18 as input, GPIO22 as output
+ */
+ val = readl(regs + AR71XX_GPIO_REG_OE);
+ val |= QCA956X_GPIO(18);
+ val &= ~QCA956X_GPIO(22);
+ writel(val, regs + AR71XX_GPIO_REG_OE);
+
+ /*
+ * Enable GPIO22 as UART0_SOUT
+ */
+ val = readl(regs + QCA956X_GPIO_REG_OUT_FUNC5);
+ val &= ~QCA956X_GPIO_MUX_MASK(16);
+ val |= QCA956X_GPIO_OUT_MUX_UART0_SOUT << 16;
+ writel(val, regs + QCA956X_GPIO_REG_OUT_FUNC5);
+
+ /*
+ * Enable GPIO18 as UART0_SIN
+ */
+ val = readl(regs + QCA956X_GPIO_REG_IN_ENABLE0);
+ val &= ~QCA956X_GPIO_MUX_MASK(8);
+ val |= QCA956X_GPIO_IN_MUX_UART0_SIN << 8;
+ writel(val, regs + QCA956X_GPIO_REG_IN_ENABLE0);
+
+ /*
+ * Enable GPIO22 output
+ */
+ val = readl(regs + AR71XX_GPIO_REG_OUT);
+ val |= QCA956X_GPIO(22);
+ writel(val, regs + AR71XX_GPIO_REG_OUT);
+}
+#endif
+
+int board_early_init_f(void)
+{
+ u32 reg;
+ void __iomem *rst_regs = map_physmem(AR71XX_RESET_BASE,
+ AR71XX_RESET_SIZE, MAP_NOCACHE);
+
+#ifndef CONFIG_SKIP_LOWLEVEL_INIT
+ /* CPU:775, DDR:650, AHB:258 */
+ qca956x_pll_init();
+ qca956x_ddr_init();
+#endif
+
+ /* Take WMAC out of reset */
+ reg = readl(rst_regs + QCA956X_RESET_REG_RESET_MODULE);
+ reg &= (~RST_RESET_RTC_RESET_SET(1));
+ writel(reg, rst_regs + QCA956X_RESET_REG_RESET_MODULE);
+
+ ath79_eth_reset();
+ return 0;
+}
--- /dev/null
+CONFIG_MIPS=y
+CONFIG_SYS_TEXT_BASE=0x9F000000
+CONFIG_SYS_MALLOC_F_LEN=0x800
+CONFIG_SYS_CACHE_SIZE_AUTO=y
+CONFIG_DEBUG_UART_BOARD_INIT=y
+CONFIG_DEBUG_UART_BASE=0xb8020000
+CONFIG_DEBUG_UART_CLOCK=25000000
+CONFIG_ARCH_ATH79=y
+CONFIG_TARGET_AP152=y
+CONFIG_DEBUG_UART=y
+CONFIG_BOOTDELAY=3
+CONFIG_USE_BOOTARGS=y
+CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/mtdblock2 rootfstype=squashfs"
+CONFIG_DISPLAY_CPUINFO=y
+CONFIG_BOARD_EARLY_INIT_F=y
+CONFIG_SYS_PROMPT="ap152 # "
+# CONFIG_CMD_BDI is not set
+# CONFIG_CMD_CONSOLE is not set
+# CONFIG_CMD_ELF is not set
+# CONFIG_CMD_XIMG is not set
+# CONFIG_CMD_EXPORTENV is not set
+# CONFIG_CMD_IMPORTENV is not set
+# CONFIG_CMD_EDITENV is not set
+# CONFIG_CMD_CRC32 is not set
+CONFIG_CMD_MEMTEST=y
+# CONFIG_CMD_FLASH is not set
+CONFIG_CMD_SF=y
+CONFIG_CMD_SPI=y
+CONFIG_CMD_MTDPARTS=y
+CONFIG_MTDIDS_DEFAULT="nor0=spi-flash.0"
+CONFIG_MTDPARTS_DEFAULT="mtdparts=spi-flash.0:256k(u-boot),64k(u-boot-env),6336k(rootfs),1472k(uImage),64k(ART)"
+# CONFIG_ISO_PARTITION is not set
+CONFIG_DEFAULT_DEVICE_TREE="ap152"
+CONFIG_ENV_IS_IN_SPI_FLASH=y
+# CONFIG_NET is not set
+CONFIG_DM_SPI_FLASH=y
+CONFIG_SPI_FLASH=y
+CONFIG_SPI_FLASH_BAR=y
+CONFIG_SPI_FLASH_WINBOND=y
+CONFIG_SPI_FLASH_DATAFLASH=y
+CONFIG_SPI_FLASH_MTD=y
+CONFIG_PINCTRL=y
+CONFIG_DM_SERIAL=y
+CONFIG_DEBUG_UART_SHIFT=2
+CONFIG_SYS_NS16550=y
+CONFIG_SPI=y
+CONFIG_DM_SPI=y
+CONFIG_ATH79_SPI=y
+CONFIG_LZMA=y
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2018 Rosy Song <rosysong@rosinson.com>
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#define CONFIG_SYS_HZ 1000
+#define CONFIG_SYS_MHZ 375
+#define CONFIG_SYS_MIPS_TIMER_FREQ (CONFIG_SYS_MHZ * 1000000)
+
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
+
+#define CONFIG_SYS_MALLOC_LEN 0x40000
+#define CONFIG_SYS_BOOTPARAMS_LEN 0x20000
+
+#define CONFIG_SYS_SDRAM_BASE 0x80000000
+#define CONFIG_SYS_LOAD_ADDR 0x81000000
+
+#define CONFIG_SYS_INIT_RAM_ADDR 0xbd000000
+#define CONFIG_SYS_INIT_RAM_SIZE 0x2000
+#define CONFIG_SYS_INIT_SP_ADDR \
+ (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_RAM_SIZE - 1)
+
+/*
+ * Serial Port
+ */
+#define CONFIG_SYS_NS16550_CLK 25000000
+#define CONFIG_SYS_BAUDRATE_TABLE \
+ {9600, 19200, 38400, 57600, 115200}
+
+#define CONFIG_BOOTCOMMAND "sf probe;" \
+ "mtdparts default;" \
+ "bootm 0x9f060000"
+
+#define CONFIG_ENV_SPI_MAX_HZ 25000000
+#define CONFIG_ENV_OFFSET 0x40000
+#define CONFIG_ENV_SECT_SIZE 0x10000
+#define CONFIG_ENV_SIZE 0x10000
+
+/* Miscellaneous configurable options */
+
+/*
+ * Diagnostics
+ */
+#define CONFIG_SYS_MEMTEST_START 0x80100000
+#define CONFIG_SYS_MEMTEST_END 0x83f00000
+
+#endif /* __CONFIG_H */
projects / oweals / u-boot.git / commitdiff