powerpc/p4080: Add workaround for errata SERDES8
authorKumar Gala <galak@kernel.crashing.org>
Tue, 13 Jul 2010 05:39:46 +0000 (00:39 -0500)
committerKumar Gala <galak@kernel.crashing.org>
Mon, 26 Jul 2010 18:07:57 +0000 (13:07 -0500)
Signed-off-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Emil Medve <Emilian.Medve@Freescale.com>
Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
arch/powerpc/cpu/mpc85xx/cmd_errata.c
arch/powerpc/cpu/mpc85xx/fsl_corenet_serdes.c
arch/powerpc/cpu/mpc85xx/fsl_corenet_serdes.h
arch/powerpc/cpu/mpc85xx/p4080_serdes.c

index d7835c8d690a6f85cb2d064a681fc99c31ab9312..01c462c4b600c4f37229218614af46c8f7ad27bc 100644 (file)
@@ -41,6 +41,10 @@ static int do_errata(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
        }
 #endif
 
+#if defined(CONFIG_SYS_P4080_ERRATUM_SERDES8)
+       puts("Work-around for Erratum SERDES8 enabled\n");
+#endif
+
        return 0;
 }
 
index 1c03061f74ed94b2b4d8c5a7c142930f8402f09a..5bcf91abf2523b8fed992dd6619fb752b4d2d76e 100644 (file)
  */
 
 #include <common.h>
+#ifdef CONFIG_SYS_P4080_ERRATUM_SERDES8
+#include <hwconfig.h>
+#endif
 #include <asm/fsl_serdes.h>
 #include <asm/immap_85xx.h>
 #include <asm/io.h>
 #include <asm/processor.h>
+#include <asm/fsl_law.h>
 #include "fsl_corenet_serdes.h"
 
 static u32 serdes_prtcl_map;
@@ -102,6 +106,13 @@ int serdes_lane_enabled(int lane)
        if (in_be32(&regs->bank[bank].rstctl) & SRDS_RSTCTL_SDPD)
                return 0;
 
+#ifdef CONFIG_SYS_P4080_ERRATUM_SERDES8
+       if (!IS_SVR_REV(get_svr(), 1, 0))
+               if (bank > 0)
+                       return !(srds_lpd_b[bank] &
+                                       (8 >> (lane - (6 + 4 * bank))));
+#endif
+
        return !(in_be32(&gur->rcwsr[word]) & (0x80000000 >> bit));
 }
 
@@ -116,6 +127,140 @@ int is_serdes_configured(enum srds_prtcl device)
        return (1 << device) & serdes_prtcl_map;
 }
 
+#ifndef CONFIG_SYS_DCSRBAR_PHYS
+#define CONFIG_SYS_DCSRBAR_PHYS        0x80000000 /* Must be 1GB-aligned for rev1.0 */
+#define CONFIG_SYS_DCSRBAR     0x80000000
+#define __DCSR_NOT_DEFINED_BY_CONFIG
+#endif
+
+#ifdef CONFIG_SYS_P4080_ERRATUM_SERDES8
+static void enable_bank(ccsr_gur_t *gur, int bank)
+{
+       u32 rcw5;
+
+       /*
+        * Enable the lanes SRDS_LPD_Bn.  The RCW bits are read-only in
+        * CCSR, and read/write in DSCR.
+        */
+       rcw5 = in_be32(gur->rcwsr + 5);
+       if (bank == FSL_SRDS_BANK_2) {
+               rcw5 &= ~FSL_CORENET_RCWSRn_SRDS_LPD_B2;
+               rcw5 |= srds_lpd_b[bank] << 26;
+       } else if (bank == FSL_SRDS_BANK_3) {
+               rcw5 &= ~FSL_CORENET_RCWSRn_SRDS_LPD_B3;
+               rcw5 |= srds_lpd_b[bank] << 18;
+       } else {
+               printf("SERDES: enable_bank: bad bank %d\n", bank + 1);
+               return;
+       }
+
+       /* See similar code in cpu/mpc85xx/cpu_init.c for an explanation
+        * of the DCSR mapping.
+        */
+       {
+#ifdef __DCSR_NOT_DEFINED_BY_CONFIG
+               struct law_entry law = find_law(CONFIG_SYS_DCSRBAR_PHYS);
+               int law_index;
+               if (law.index == -1)
+                       law_index = set_next_law(CONFIG_SYS_DCSRBAR_PHYS,
+                                                LAW_SIZE_1M, LAW_TRGT_IF_DCSR);
+               else
+                       set_law(law.index, CONFIG_SYS_DCSRBAR_PHYS, LAW_SIZE_1M,
+                               LAW_TRGT_IF_DCSR);
+#endif
+               u32 *p = (void *)CONFIG_SYS_DCSRBAR + 0x20114;
+               out_be32(p, rcw5);
+#ifdef __DCSR_NOT_DEFINED_BY_CONFIG
+               if (law.index == -1)
+                       disable_law(law_index);
+               else
+                       set_law(law.index, law.addr, law.size, law.trgt_id);
+#endif
+       }
+}
+
+/*
+ * To avoid problems with clock jitter, rev 2 p4080 uses the pll from
+ * bank 3 to clock banks 2 and 3, as well as a limited selection of
+ * protocol configurations.  This requires that banks 2 and 3's lanes be
+ * disabled in the RCW, and enabled with some fixup here to re-enable
+ * them, and to configure bank 2's clock parameters in bank 3's pll in
+ * cases where they differ.
+ */
+static void p4080_erratum_serdes8(serdes_corenet_t *regs, ccsr_gur_t *gur,
+                                 u32 devdisr, u32 devdisr2, int cfg)
+{
+       int srds_ratio_b2;
+       int rfck_sel;
+
+       /*
+        * The disabled lanes of bank 2 will cause the associated
+        * logic blocks to be disabled in DEVDISR.  We reverse that here.
+        *
+        * Note that normally it is not permitted to clear DEVDISR bits
+        * once the device has been disabled, but the hardware people
+        * say that this special case is OK.
+        */
+       clrbits_be32(&gur->devdisr, devdisr);
+       clrbits_be32(&gur->devdisr2, devdisr2);
+
+       /*
+        * Some protocols require special handling.  There are a few
+        * additional protocol configurations that can be used, which are
+        * not listed here.  See app note 4065 for supported protocol
+        * configurations.
+        */
+       switch (cfg) {
+       case 0x19:
+               /*
+                * Bank 2 has PCIe which wants BWSEL -- tell bank 3's PLL.
+                * SGMII on bank 3 should still be usable.
+                */
+               setbits_be32(&regs->bank[FSL_SRDS_BANK_3].pllcr1,
+                            SRDS_PLLCR1_PLL_BWSEL);
+
+               enable_bank(gur, FSL_SRDS_BANK_3);
+               break;
+
+       case 0x0f:
+       case 0x10:
+               /*
+                * Banks 2 (XAUI) and 3 (SGMII) have different clocking
+                * requirements in these configurations.  Bank 3 cannot
+                * be used and should have its lanes (but not the bank
+                * itself) disabled in the RCW.  We set up bank 3's pll
+                * for bank 2's needs here.
+                */
+               srds_ratio_b2 = (in_be32(&gur->rcwsr[4]) >> 13) & 7;
+
+               /* Determine refclock from XAUI ratio */
+               switch (srds_ratio_b2) {
+               case 1: /* 20:1 */
+                       rfck_sel = SRDS_PLLCR0_RFCK_SEL_156_25;
+                       break;
+               case 2: /* 25:1 */
+                       rfck_sel = SRDS_PLLCR0_RFCK_SEL_125;
+                       break;
+               default:
+                       printf("SERDES: bad SRDS_RATIO_B2 %d\n",
+                              srds_ratio_b2);
+                       return;
+               }
+
+               clrsetbits_be32(&regs->bank[FSL_SRDS_BANK_3].pllcr0,
+                               SRDS_PLLCR0_RFCK_SEL_MASK, rfck_sel);
+
+               clrsetbits_be32(&regs->bank[FSL_SRDS_BANK_3].pllcr0,
+                               SRDS_PLLCR0_FRATE_SEL_MASK,
+                               SRDS_PLLCR0_FRATE_SEL_6_25);
+               break;
+       default:
+               enable_bank(gur, FSL_SRDS_BANK_3);
+       }
+
+}
+#endif
+
 void fsl_serdes_init(void)
 {
        ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
@@ -125,6 +270,13 @@ void fsl_serdes_init(void)
        enum srds_prtcl lane_prtcl;
        long long end_tick;
        int have_bank[SRDS_MAX_BANK] = {};
+#ifdef CONFIG_SYS_P4080_ERRATUM_SERDES8
+       u32 serdes8_devdisr = 0;
+       u32 serdes8_devdisr2 = 0;
+       char srds_lpd_opt[16];
+       const char *srds_lpd_arg;
+       size_t arglen;
+#endif
 
        /* Is serdes enabled at all? */
        if (!(in_be32(&gur->rcwsr[5]) & FSL_CORENET_RCWSR5_SRDS_EN))
@@ -139,6 +291,18 @@ void fsl_serdes_init(void)
                return;
        }
 
+#ifdef CONFIG_SYS_P4080_ERRATUM_SERDES8
+       if (!IS_SVR_REV(get_svr(), 1, 0))
+               for (bank = 1; bank < ARRAY_SIZE(srds_lpd_b); bank++) {
+                       sprintf(srds_lpd_opt, "fsl_srds_lpd_b%u", bank + 1);
+                       srds_lpd_arg = hwconfig_subarg("serdes", srds_lpd_opt,
+                                                      &arglen);
+                       if (srds_lpd_arg)
+                               srds_lpd_b[bank] = simple_strtoul(srds_lpd_arg,
+                                                                 NULL, 0);
+               }
+#endif
+
        /* Look for banks with all lanes disabled, and power down the bank. */
        for (lane = 0; lane < SRDS_MAX_LANES; lane++) {
                enum srds_prtcl lane_prtcl = serdes_get_prtcl(cfg, lane);
@@ -148,6 +312,35 @@ void fsl_serdes_init(void)
                }
        }
 
+#ifdef CONFIG_SYS_P4080_ERRATUM_SERDES8
+       if (IS_SVR_REV(get_svr(), 1, 0)) {
+               /* At least one bank must be disabled due to SERDES8.  If
+                * no bank is found to be disabled based on lane
+                * disables, disable bank 3 because we can't turn off its
+                * lanes in the RCW without disabling MDIO due to erratum
+                * GEN8.
+                *
+                * This means that if you are relying on bank 3 being
+                * disabled to avoid SERDES8, in some cases you cannot
+                * also disable all lanes of another bank, or else bank
+                * 3 won't be disabled, leaving you with a configuration
+                * that isn't valid according to SERDES8 (e.g. if banks
+                * 2 and 3 have the same clock, and bank 1 is disabled
+                * instead of 3).
+                */
+               for (bank = 0; bank < SRDS_MAX_BANK; bank++) {
+                       if (!have_bank[bank])
+                               break;
+               }
+
+               if (bank == SRDS_MAX_BANK)
+                       have_bank[FSL_SRDS_BANK_3] = 0;
+       } else {
+               if (have_bank[FSL_SRDS_BANK_2])
+                       have_bank[FSL_SRDS_BANK_3] = 1;
+       }
+#endif
+
        for (bank = 0; bank < SRDS_MAX_BANK; bank++) {
                if (!have_bank[bank]) {
                        printf("SERDES: bank %d disabled\n", bank + 1);
@@ -176,6 +369,68 @@ void fsl_serdes_init(void)
                }
 
                printf("%s ", serdes_prtcl_str[lane_prtcl]);
+#endif
+
+#ifdef CONFIG_SYS_P4080_ERRATUM_SERDES8
+               switch (lane_prtcl) {
+               case PCIE1:
+               case PCIE2:
+               case PCIE3:
+                       serdes8_devdisr |= FSL_CORENET_DEVDISR_PCIE1 >>
+                                          (lane_prtcl - PCIE1);
+                       break;
+               case SRIO1:
+               case SRIO2:
+                       serdes8_devdisr |= FSL_CORENET_DEVDISR_SRIO1 >>
+                                          (lane_prtcl - SRIO1);
+                       break;
+               case SGMII_FM1_DTSEC1:
+                       serdes8_devdisr2 |= FSL_CORENET_DEVDISR2_FM1 |
+                                           FSL_CORENET_DEVDISR2_DTSEC1_1;
+                       break;
+               case SGMII_FM1_DTSEC2:
+                       serdes8_devdisr2 |= FSL_CORENET_DEVDISR2_FM1 |
+                                           FSL_CORENET_DEVDISR2_DTSEC1_2;
+                       break;
+               case SGMII_FM1_DTSEC3:
+                       serdes8_devdisr2 |= FSL_CORENET_DEVDISR2_FM1 |
+                                           FSL_CORENET_DEVDISR2_DTSEC1_3;
+                       break;
+               case SGMII_FM1_DTSEC4:
+                       serdes8_devdisr2 |= FSL_CORENET_DEVDISR2_FM1 |
+                                           FSL_CORENET_DEVDISR2_DTSEC1_4;
+                       break;
+               case SGMII_FM2_DTSEC1:
+                       serdes8_devdisr2 |= FSL_CORENET_DEVDISR2_FM2 |
+                                           FSL_CORENET_DEVDISR2_DTSEC2_1;
+                       break;
+               case SGMII_FM2_DTSEC2:
+                       serdes8_devdisr2 |= FSL_CORENET_DEVDISR2_FM2 |
+                                           FSL_CORENET_DEVDISR2_DTSEC2_2;
+                       break;
+               case SGMII_FM2_DTSEC3:
+                       serdes8_devdisr2 |= FSL_CORENET_DEVDISR2_FM2 |
+                                           FSL_CORENET_DEVDISR2_DTSEC2_3;
+                       break;
+               case SGMII_FM2_DTSEC4:
+                       serdes8_devdisr2 |= FSL_CORENET_DEVDISR2_FM2 |
+                                           FSL_CORENET_DEVDISR2_DTSEC2_4;
+                       break;
+               case XAUI_FM1:
+               case XAUI_FM2:
+                       if (lane_prtcl == XAUI_FM1)
+                               serdes8_devdisr2 |= FSL_CORENET_DEVDISR2_FM1    |
+                                                   FSL_CORENET_DEVDISR2_10GEC1;
+                       else
+                               serdes8_devdisr2 |= FSL_CORENET_DEVDISR2_FM2    |
+                                                   FSL_CORENET_DEVDISR2_10GEC2;
+                       break;
+               case AURORA:
+                       break;
+               default:
+                       break;
+               }
+
 #endif
        }
 
@@ -188,10 +443,38 @@ void fsl_serdes_init(void)
 
                bank = idx;
 
+#ifdef CONFIG_SYS_P4080_ERRATUM_SERDES8
+               if (!IS_SVR_REV(get_svr(), 1, 0)) {
+                       /*
+                        * Change bank init order to 0, 2, 1, so that the
+                        * third bank's PLL is established before we
+                        * start the second bank which shares the third
+                        * bank's PLL.
+                        */
+
+                       if (idx == 1)
+                               bank = FSL_SRDS_BANK_3;
+                       else if (idx == 2)
+                               bank = FSL_SRDS_BANK_2;
+               }
+#endif
+
                /* Skip disabled banks */
                if (!have_bank[bank])
                        continue;
 
+#ifdef CONFIG_SYS_P4080_ERRATUM_SERDES8
+               if (!IS_SVR_REV(get_svr(), 1, 0)) {
+                       if (idx == 1) {
+                               p4080_erratum_serdes8(srds_regs, gur,
+                                                     serdes8_devdisr,
+                                                     serdes8_devdisr2, cfg);
+                       } else if (idx == 2) {
+                               enable_bank(gur, FSL_SRDS_BANK_2);
+                       }
+               }
+#endif
+
                /* reset banks for errata */
                setbits_be32(&srds_regs->bank[bank].rstctl, SRDS_RSTCTL_RST);
 
index 4e1f33144ad626045c30df21178d6b95b926ec99..42d771e0965637ee7e73689a601423b7dd0bc303 100644 (file)
@@ -37,4 +37,8 @@ int serdes_get_bank(int lane);
 int serdes_lane_enabled(int lane);
 enum srds_prtcl serdes_get_prtcl(int cfg, int lane);
 
+#ifdef CONFIG_SYS_P4080_ERRATUM_SERDES8
+extern uint16_t srds_lpd_b[SRDS_MAX_BANK];
+#endif
+
 #endif /* __FSL_CORENET_SERDES_H */
index eb6223cc93c817deebe36a3256ff090796681358..87bd7952930d87ed93e5c555e16c4bae5c188365 100644 (file)
@@ -71,6 +71,10 @@ static u8 serdes_cfg_tbl[][SRDS_MAX_LANES] = {
                XAUI_FM1, XAUI_FM1, XAUI_FM1, XAUI_FM1},
 };
 
+#ifdef CONFIG_SYS_P4080_ERRATUM_SERDES8
+uint16_t srds_lpd_b[SRDS_MAX_BANK];
+#endif
+
 enum srds_prtcl serdes_get_prtcl(int cfg, int lane)
 {
        if (!serdes_lane_enabled(lane))