net: zynq: Disable secondary queues
authorEdgar E. Iglesias <edgar.iglesias@xilinx.com>
Sat, 26 Sep 2015 06:50:07 +0000 (23:50 -0700)
committerMichal Simek <michal.simek@xilinx.com>
Thu, 19 Nov 2015 13:03:01 +0000 (14:03 +0100)
Zynq has no priority queues.
ZynqMP has one priority queue and this change is required
to get ethernet working.
This patch was not needed on ep108 for uknown reason even
it should be used.
Tested on Zynq and ZynqMP.

Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
drivers/net/zynq_gem.c

index 1b5b6fd942af82b075578cc7a81f9625a1c60e9d..027b49bf7b2c60305518c2137d1125ab50446ee3 100644 (file)
@@ -132,6 +132,10 @@ struct zynq_gem_regs {
        u32 reserved6[18];
 #define STAT_SIZE      44
        u32 stat[STAT_SIZE]; /* 0x100 - Octects transmitted Low reg */
+       u32 reserved7[164];
+       u32 transmit_q1_ptr; /* 0x440 - Transmit priority queue 1 */
+       u32 reserved8[15];
+       u32 receive_q1_ptr; /* 0x480 - Receive priority queue 1 */
 };
 
 /* BD descriptors */
@@ -148,6 +152,9 @@ struct emac_bd {
 /* BD separation space */
 #define BD_SEPRN_SPACE (RX_BUF * sizeof(struct emac_bd))
 
+/* Setup the first free TX descriptor */
+#define TX_FREE_DESC   2
+
 /* Initialized, rxbd_current, rx_first_buf must be 0 after init */
 struct zynq_gem_priv {
        struct emac_bd *tx_bd;
@@ -305,6 +312,8 @@ static int zynq_gem_init(struct eth_device *dev, bd_t * bis)
        struct phy_device *phydev;
        struct zynq_gem_regs *regs = (struct zynq_gem_regs *)dev->iobase;
        struct zynq_gem_priv *priv = dev->priv;
+       struct emac_bd *dummy_tx_bd = &priv->tx_bd[TX_FREE_DESC];
+       struct emac_bd *dummy_rx_bd = &priv->tx_bd[TX_FREE_DESC + 2];
        const u32 supported = SUPPORTED_10baseT_Half |
                        SUPPORTED_10baseT_Full |
                        SUPPORTED_100baseT_Half |
@@ -353,6 +362,23 @@ static int zynq_gem_init(struct eth_device *dev, bd_t * bis)
                /* Setup for Network Control register, MDIO, Rx and Tx enable */
                setbits_le32(&regs->nwctrl, ZYNQ_GEM_NWCTRL_MDEN_MASK);
 
+               /* Disable the second priority queue */
+               dummy_tx_bd->addr = 0;
+               dummy_tx_bd->status = ZYNQ_GEM_TXBUF_WRAP_MASK |
+                               ZYNQ_GEM_TXBUF_LAST_MASK|
+                               ZYNQ_GEM_TXBUF_USED_MASK;
+
+               dummy_rx_bd->addr = ZYNQ_GEM_RXBUF_WRAP_MASK |
+                               ZYNQ_GEM_RXBUF_NEW_MASK;
+               dummy_rx_bd->status = 0;
+               flush_dcache_range((ulong)&dummy_tx_bd, (ulong)&dummy_tx_bd +
+                                  sizeof(dummy_tx_bd));
+               flush_dcache_range((ulong)&dummy_rx_bd, (ulong)&dummy_rx_bd +
+                                  sizeof(dummy_rx_bd));
+
+               writel((ulong)dummy_tx_bd, &regs->transmit_q1_ptr);
+               writel((ulong)dummy_rx_bd, &regs->receive_q1_ptr);
+
                priv->init++;
        }