// SPDX-License-Identifier: GPL-2.0+
/*
* (C) Copyright 2016 Rockchip Electronics Co., Ltd
+ * (C) 2018 Theobroma Systems Design und Consulting GmbH
*/
#include <common.h>
#include <asm/arch/clock.h>
#include <dm/pinctrl.h>
+static const u32 RK_GRF_P_PULLUP = 1;
+static const u32 RK_GRF_P_PULLDOWN = 2;
+
struct rk3399_pinctrl_priv {
struct rk3399_grf_regs *grf;
struct rk3399_pmugrf_regs *pmugrf;
+ struct rockchip_pin_bank *banks;
+};
+
+/* Location of pinctrl/pinconf registers. */
+enum rk_grf_location {
+ RK_GRF,
+ RK_PMUGRF,
+};
+
+/**
+ * @nr_pins: number of pins in this bank
+ * @grf_location: location of pinctrl/pinconf registers
+ * @bank_num: number of the bank, to account for holes
+ * @iomux: array describing the 4 iomux sources of the bank
+ */
+struct rockchip_pin_bank {
+ u8 nr_pins;
+ enum rk_grf_location grf_location;
+ size_t iomux_offset;
+ size_t pupd_offset;
+};
+
+#define PIN_BANK(pins, grf, iomux, pupd) \
+ { \
+ .nr_pins = pins, \
+ .grf_location = grf, \
+ .iomux_offset = iomux, \
+ .pupd_offset = pupd, \
+ }
+
+static struct rockchip_pin_bank rk3399_pin_banks[] = {
+ PIN_BANK(16, RK_PMUGRF,
+ offsetof(struct rk3399_pmugrf_regs, gpio0a_iomux),
+ offsetof(struct rk3399_pmugrf_regs, gpio0_p)),
+ PIN_BANK(32, RK_PMUGRF,
+ offsetof(struct rk3399_pmugrf_regs, gpio1a_iomux),
+ offsetof(struct rk3399_pmugrf_regs, gpio1_p)),
+ PIN_BANK(32, RK_GRF,
+ offsetof(struct rk3399_grf_regs, gpio2a_iomux),
+ offsetof(struct rk3399_grf_regs, gpio2_p)),
+ PIN_BANK(32, RK_GRF,
+ offsetof(struct rk3399_grf_regs, gpio3a_iomux),
+ offsetof(struct rk3399_grf_regs, gpio3_p)),
+ PIN_BANK(32, RK_GRF,
+ offsetof(struct rk3399_grf_regs, gpio4a_iomux),
+ offsetof(struct rk3399_grf_regs, gpio4_p)),
};
+static void rk_pinctrl_get_info(uintptr_t base, u32 index, uintptr_t *addr,
+ u32 *shift, u32 *mask)
+{
+ /*
+ * In general we four subsequent 32-bit configuration registers
+ * per bank (e.g. GPIO2A_P, GPIO2B_P, GPIO2C_P, GPIO2D_P).
+ * The configuration for each pin has two bits.
+ *
+ * @base...contains the address to the first register.
+ * @index...defines the pin within the bank (0..31).
+ * @addr...will be the address of the actual register to use
+ * @shift...will be the bit position in the configuration register
+ * @mask...will be the (unshifted) mask
+ */
+
+ const u32 pins_per_register = 8;
+ const u32 config_bits_per_pin = 2;
+
+ /* Get the address of the configuration register. */
+ *addr = base + (index / pins_per_register) * sizeof(u32);
+
+ /* Get the bit offset within the configuration register. */
+ *shift = (index & (pins_per_register - 1)) * config_bits_per_pin;
+
+ /* Get the (unshifted) mask for the configuration pins. */
+ *mask = ((1 << config_bits_per_pin) - 1);
+
+ pr_debug("%s: addr=0x%lx, mask=0x%x, shift=0x%x\n",
+ __func__, *addr, *mask, *shift);
+}
+
+static void rk3399_pinctrl_set_pin_iomux(uintptr_t grf_addr,
+ struct rockchip_pin_bank *bank,
+ u32 index, u32 muxval)
+{
+ uintptr_t iomux_base, addr;
+ u32 shift, mask;
+
+ iomux_base = grf_addr + bank->iomux_offset;
+ rk_pinctrl_get_info(iomux_base, index, &addr, &shift, &mask);
+
+ /* Set pinmux register */
+ rk_clrsetreg(addr, mask << shift, muxval << shift);
+}
+
+static void rk3399_pinctrl_set_pin_pupd(uintptr_t grf_addr,
+ struct rockchip_pin_bank *bank,
+ u32 index, int pinconfig)
+{
+ uintptr_t pupd_base, addr;
+ u32 shift, mask, pupdval;
+
+ /* Fast path in case there's nothing to do. */
+ if (!pinconfig)
+ return;
+
+ if (pinconfig & (1 << PIN_CONFIG_BIAS_PULL_UP))
+ pupdval = RK_GRF_P_PULLUP;
+ else if (pinconfig & (1 << PIN_CONFIG_BIAS_PULL_DOWN))
+ pupdval = RK_GRF_P_PULLDOWN;
+ else
+ /* Flag not supported. */
+ pr_warn("%s: Unsupported pinconfig flag: 0x%x\n", __func__,
+ pinconfig);
+ return;
+
+ pupd_base = grf_addr + (uintptr_t)bank->pupd_offset;
+ rk_pinctrl_get_info(pupd_base, index, &addr, &shift, &mask);
+
+ /* Set pull-up/pull-down regisrer */
+ rk_clrsetreg(addr, mask << shift, pupdval << shift);
+}
+
+static int rk3399_pinctrl_set_pin(struct udevice *dev, u32 banknum, u32 index,
+ u32 muxval, int pinconfig)
+{
+ struct rk3399_pinctrl_priv *priv = dev_get_priv(dev);
+ struct rockchip_pin_bank *bank = &priv->banks[banknum];
+ uintptr_t grf_addr;
+
+ pr_debug("%s: 0x%x 0x%x 0x%x 0x%x\n", __func__, banknum, index, muxval,
+ pinconfig);
+
+ if (bank->grf_location == RK_GRF)
+ grf_addr = (uintptr_t)priv->grf;
+ else if (bank->grf_location == RK_PMUGRF)
+ grf_addr = (uintptr_t)priv->pmugrf;
+ else
+ return -EINVAL;
+
+ rk3399_pinctrl_set_pin_iomux(grf_addr, bank, index, muxval);
+
+ rk3399_pinctrl_set_pin_pupd(grf_addr, bank, index, pinconfig);
+ return 0;
+}
+
+static int rk3399_pinctrl_set_state(struct udevice *dev, struct udevice *config)
+{
+ /*
+ * The order of the fields in this struct must match the order of
+ * the fields in the "rockchip,pins" property.
+ */
+ struct rk_pin {
+ u32 banknum;
+ u32 index;
+ u32 muxval;
+ u32 phandle;
+ } __packed;
+
+ u32 *fields = NULL;
+ const int fields_per_pin = 4;
+ int num_fields, num_pins;
+ int ret;
+ int size;
+ int i;
+ struct rk_pin *pin;
+
+ pr_debug("%s: %s\n", __func__, config->name);
+
+ size = dev_read_size(config, "rockchip,pins");
+ if (size < 0)
+ return -EINVAL;
+
+ num_fields = size / sizeof(u32);
+ num_pins = num_fields / fields_per_pin;
+
+ if (num_fields * sizeof(u32) != size ||
+ num_pins * fields_per_pin != num_fields) {
+ pr_warn("Invalid number of rockchip,pins fields.\n");
+ return -EINVAL;
+ }
+
+ fields = calloc(num_fields, sizeof(u32));
+ if (!fields)
+ return -ENOMEM;
+
+ ret = dev_read_u32_array(config, "rockchip,pins", fields, num_fields);
+ if (ret) {
+ pr_warn("%s: Failed to read rockchip,pins fields.\n",
+ config->name);
+ goto end;
+ }
+
+ pin = (struct rk_pin *)fields;
+ for (i = 0; i < num_pins; i++, pin++) {
+ struct udevice *dev_pinconfig;
+ int pinconfig;
+
+ ret = uclass_get_device_by_phandle_id(UCLASS_PINCONFIG,
+ pin->phandle,
+ &dev_pinconfig);
+ if (ret) {
+ pr_debug("Could not get pinconfig device\n");
+ goto end;
+ }
+
+ pinconfig = pinctrl_decode_pin_config_dm(dev_pinconfig);
+ if (pinconfig < 0) {
+ pr_warn("Could not parse pinconfig\n");
+ goto end;
+ }
+
+ ret = rk3399_pinctrl_set_pin(dev, pin->banknum, pin->index,
+ pin->muxval, pinconfig);
+ if (ret) {
+ pr_warn("Could not set pinctrl settings\n");
+ goto end;
+ }
+ }
+
+end:
+ free(fields);
+ return ret;
+}
+
static void pinctrl_rk3399_pwm_config(struct rk3399_grf_regs *grf,
struct rk3399_pmugrf_regs *pmugrf, int pwm_id)
{
}
static struct pinctrl_ops rk3399_pinctrl_ops = {
+ .set_state = rk3399_pinctrl_set_state,
.set_state_simple = rk3399_pinctrl_set_state_simple,
.request = rk3399_pinctrl_request,
.get_periph_id = rk3399_pinctrl_get_periph_id,
priv->grf = syscon_get_first_range(ROCKCHIP_SYSCON_GRF);
priv->pmugrf = syscon_get_first_range(ROCKCHIP_SYSCON_PMUGRF);
debug("%s: grf=%p, pmugrf=%p\n", __func__, priv->grf, priv->pmugrf);
+ priv->banks = rk3399_pin_banks;
return ret;
}