m28evk: white space cleanup
authorWolfgang Denk <wd@denx.de>
Sat, 23 Mar 2013 23:50:35 +0000 (23:50 +0000)
committerTom Rini <trini@ti.com>
Wed, 1 May 2013 20:24:01 +0000 (16:24 -0400)
Change all "#define<TAB>" sequences into "#define<SPACE>"

Signed-off-by: Wolfgang Denk <wd@denx.de>
Acked-by: Marek Vasut <marex@denx.de>
include/configs/m28evk.h

index f2725cc87fb7086106609e2f4099f585bddd5250..95eb735dd9349c1a4f88154ce24420641407b972 100644 (file)
 /*
  * SoC configurations
  */
-#define        CONFIG_MX28                             /* i.MX28 SoC */
-#define        CONFIG_MXS_GPIO                         /* GPIO control */
-#define        CONFIG_SYS_HZ           1000            /* Ticks per second */
+#define CONFIG_MX28                            /* i.MX28 SoC */
+#define CONFIG_MXS_GPIO                                /* GPIO control */
+#define CONFIG_SYS_HZ          1000            /* Ticks per second */
 
 /*
  * Define M28EVK machine type by hand until it lands in mach-types
  */
-#define        MACH_TYPE_M28EVK        3613
+#define MACH_TYPE_M28EVK       3613
 
-#define        CONFIG_MACH_TYPE        MACH_TYPE_M28EVK
+#define CONFIG_MACH_TYPE       MACH_TYPE_M28EVK
 
 #include <asm/arch/regs-base.h>
 
-#define        CONFIG_SYS_NO_FLASH
-#define        CONFIG_BOARD_EARLY_INIT_F
-#define        CONFIG_ARCH_MISC_INIT
+#define CONFIG_SYS_NO_FLASH
+#define CONFIG_BOARD_EARLY_INIT_F
+#define CONFIG_ARCH_MISC_INIT
 
 /*
  * SPL
  */
-#define        CONFIG_SPL
-#define        CONFIG_SPL_NO_CPU_SUPPORT_CODE
-#define        CONFIG_SPL_START_S_PATH         "arch/arm/cpu/arm926ejs/mxs"
-#define        CONFIG_SPL_LDSCRIPT     "arch/arm/cpu/arm926ejs/mxs/u-boot-spl.lds"
-#define        CONFIG_SPL_LIBCOMMON_SUPPORT
-#define        CONFIG_SPL_LIBGENERIC_SUPPORT
-#define        CONFIG_SPL_GPIO_SUPPORT
+#define CONFIG_SPL
+#define CONFIG_SPL_NO_CPU_SUPPORT_CODE
+#define CONFIG_SPL_START_S_PATH                "arch/arm/cpu/arm926ejs/mxs"
+#define CONFIG_SPL_LDSCRIPT    "arch/arm/cpu/arm926ejs/mxs/u-boot-spl.lds"
+#define CONFIG_SPL_LIBCOMMON_SUPPORT
+#define CONFIG_SPL_LIBGENERIC_SUPPORT
+#define CONFIG_SPL_GPIO_SUPPORT
 
 /*
  * U-Boot Commands
  */
 #include <config_cmd_default.h>
-#define        CONFIG_DISPLAY_CPUINFO
-#define        CONFIG_DOS_PARTITION
+#define CONFIG_DISPLAY_CPUINFO
+#define CONFIG_DOS_PARTITION
 
-#define        CONFIG_CMD_CACHE
-#define        CONFIG_CMD_DATE
-#define        CONFIG_CMD_DHCP
-#define        CONFIG_CMD_EEPROM
-#define        CONFIG_CMD_EXT2
-#define        CONFIG_CMD_FAT
-#define        CONFIG_CMD_GPIO
-#define        CONFIG_CMD_I2C
-#define        CONFIG_CMD_MII
-#define        CONFIG_CMD_MMC
-#define        CONFIG_CMD_NAND
-#define        CONFIG_CMD_NET
-#define        CONFIG_CMD_NFS
-#define        CONFIG_CMD_PING
-#define        CONFIG_CMD_SETEXPR
-#define        CONFIG_CMD_SF
-#define        CONFIG_CMD_SPI
-#define        CONFIG_CMD_USB
+#define CONFIG_CMD_CACHE
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_EEPROM
+#define CONFIG_CMD_EXT2
+#define CONFIG_CMD_FAT
+#define CONFIG_CMD_GPIO
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_MMC
+#define CONFIG_CMD_NAND
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_NFS
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_SETEXPR
+#define CONFIG_CMD_SF
+#define CONFIG_CMD_SPI
+#define CONFIG_CMD_USB
 
 /*
  * Memory configurations
  */
-#define        CONFIG_NR_DRAM_BANKS            1               /* 1 bank of DRAM */
-#define        PHYS_SDRAM_1                    0x40000000      /* Base address */
-#define        PHYS_SDRAM_1_SIZE               0x20000000      /* Max 512 MB RAM */
-#define        CONFIG_SYS_MALLOC_LEN           0x00400000      /* 4 MB for malloc */
-#define        CONFIG_SYS_GBL_DATA_SIZE        128             /* Initial data */
-#define        CONFIG_SYS_MEMTEST_START        0x40000000      /* Memtest start adr */
-#define        CONFIG_SYS_MEMTEST_END          0x40400000      /* 4 MB RAM test */
-#define        CONFIG_SYS_SDRAM_BASE           PHYS_SDRAM_1
+#define CONFIG_NR_DRAM_BANKS           1               /* 1 bank of DRAM */
+#define PHYS_SDRAM_1                   0x40000000      /* Base address */
+#define PHYS_SDRAM_1_SIZE              0x20000000      /* Max 512 MB RAM */
+#define CONFIG_SYS_MALLOC_LEN          0x00400000      /* 4 MB for malloc */
+#define CONFIG_SYS_GBL_DATA_SIZE       128             /* Initial data */
+#define CONFIG_SYS_MEMTEST_START       0x40000000      /* Memtest start adr */
+#define CONFIG_SYS_MEMTEST_END         0x40400000      /* 4 MB RAM test */
+#define CONFIG_SYS_SDRAM_BASE          PHYS_SDRAM_1
 /* Point initial SP in SRAM so SPL can use it too. */
 
 #define CONFIG_SYS_INIT_RAM_ADDR       0x00000000
  * strange BUG in ROM corrupting first 4 bytes of RAM when loading U-Boot
  * binary. In case there was more of this mess, 0x100 bytes are skipped.
  */
-#define        CONFIG_SYS_TEXT_BASE            0x40000100
+#define CONFIG_SYS_TEXT_BASE           0x40000100
 
 /*
  * U-Boot general configurations
  */
-#define        CONFIG_SYS_LONGHELP
-#define        CONFIG_SYS_PROMPT       "=> "
-#define        CONFIG_SYS_CBSIZE       1024            /* Console I/O buffer size */
-#define        CONFIG_SYS_PBSIZE       \
+#define CONFIG_SYS_LONGHELP
+#define CONFIG_SYS_PROMPT      "=> "
+#define CONFIG_SYS_CBSIZE      1024            /* Console I/O buffer size */
+#define CONFIG_SYS_PBSIZE      \
        (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
                                                /* Print buffer size */
-#define        CONFIG_SYS_MAXARGS      32              /* Max number of command args */
-#define        CONFIG_SYS_BARGSIZE     CONFIG_SYS_CBSIZE
+#define CONFIG_SYS_MAXARGS     32              /* Max number of command args */
+#define CONFIG_SYS_BARGSIZE    CONFIG_SYS_CBSIZE
                                                /* Boot argument buffer size */
-#define        CONFIG_VERSION_VARIABLE                 /* U-BOOT version */
-#define        CONFIG_AUTO_COMPLETE                    /* Command auto complete */
-#define        CONFIG_CMDLINE_EDITING                  /* Command history etc */
-#define        CONFIG_SYS_HUSH_PARSER
+#define CONFIG_VERSION_VARIABLE                        /* U-BOOT version */
+#define CONFIG_AUTO_COMPLETE                   /* Command auto complete */
+#define CONFIG_CMDLINE_EDITING                 /* Command history etc */
+#define CONFIG_SYS_HUSH_PARSER
 
 /*
  * Serial Driver
  */
-#define        CONFIG_PL011_SERIAL
-#define        CONFIG_PL011_CLOCK              24000000
-#define        CONFIG_PL01x_PORTS              { (void *)MXS_UARTDBG_BASE }
-#define        CONFIG_CONS_INDEX               0
-#define        CONFIG_BAUDRATE                 115200  /* Default baud rate */
+#define CONFIG_PL011_SERIAL
+#define CONFIG_PL011_CLOCK             24000000
+#define CONFIG_PL01x_PORTS             { (void *)MXS_UARTDBG_BASE }
+#define CONFIG_CONS_INDEX              0
+#define CONFIG_BAUDRATE                        115200  /* Default baud rate */
 
 /*
  * MMC Driver
  */
 #ifdef CONFIG_CMD_MMC
-#define        CONFIG_MMC
-#define        CONFIG_BOUNCE_BUFFER
-#define        CONFIG_GENERIC_MMC
-#define        CONFIG_MXS_MMC
+#define CONFIG_MMC
+#define CONFIG_BOUNCE_BUFFER
+#define CONFIG_GENERIC_MMC
+#define CONFIG_MXS_MMC
 #endif
 
 /*
 /*
  * NAND
  */
-#define        CONFIG_ENV_SIZE                 (16 * 1024)
+#define CONFIG_ENV_SIZE                        (16 * 1024)
 #ifdef CONFIG_CMD_NAND
-#define        CONFIG_NAND_MXS
-#define        CONFIG_SYS_MAX_NAND_DEVICE      1
-#define        CONFIG_SYS_NAND_BASE            0x60000000
-#define        CONFIG_SYS_NAND_5_ADDR_CYCLE
+#define CONFIG_NAND_MXS
+#define CONFIG_SYS_MAX_NAND_DEVICE     1
+#define CONFIG_SYS_NAND_BASE           0x60000000
+#define CONFIG_SYS_NAND_5_ADDR_CYCLE
 
 /* Environment is in NAND */
-#define        CONFIG_ENV_IS_IN_NAND
-#define        CONFIG_ENV_SIZE_REDUND          CONFIG_ENV_SIZE
-#define        CONFIG_ENV_SECT_SIZE            (128 * 1024)
-#define        CONFIG_ENV_RANGE                (512 * 1024)
-#define        CONFIG_ENV_OFFSET               0x300000
-#define        CONFIG_ENV_OFFSET_REDUND        \
+#define CONFIG_ENV_IS_IN_NAND
+#define CONFIG_ENV_SIZE_REDUND         CONFIG_ENV_SIZE
+#define CONFIG_ENV_SECT_SIZE           (128 * 1024)
+#define CONFIG_ENV_RANGE               (512 * 1024)
+#define CONFIG_ENV_OFFSET              0x300000
+#define CONFIG_ENV_OFFSET_REDUND       \
                (CONFIG_ENV_OFFSET + CONFIG_ENV_RANGE)
 
-#define        CONFIG_CMD_UBI
-#define        CONFIG_CMD_UBIFS
-#define        CONFIG_CMD_MTDPARTS
-#define        CONFIG_RBTREE
-#define        CONFIG_LZO
-#define        CONFIG_MTD_DEVICE
-#define        CONFIG_MTD_PARTITIONS
-#define        MTDIDS_DEFAULT                  "nand0=gpmi-nand"
-#define        MTDPARTS_DEFAULT                        \
+#define CONFIG_CMD_UBI
+#define CONFIG_CMD_UBIFS
+#define CONFIG_CMD_MTDPARTS
+#define CONFIG_RBTREE
+#define CONFIG_LZO
+#define CONFIG_MTD_DEVICE
+#define CONFIG_MTD_PARTITIONS
+#define MTDIDS_DEFAULT                 "nand0=gpmi-nand"
+#define MTDPARTS_DEFAULT                       \
        "mtdparts=gpmi-nand:"                   \
                "3m(bootloader)ro,"             \
                "512k(environment),"            \
                "8m(ramdisk),"                  \
                "-(filesystem)"
 #else
-#define        CONFIG_ENV_IS_NOWHERE
+#define CONFIG_ENV_IS_NOWHERE
 #endif
 
 /*
  * Ethernet on SOC (FEC)
  */
 #ifdef CONFIG_CMD_NET
-#define        CONFIG_ETHPRIME                 "FEC0"
-#define        CONFIG_FEC_MXC
-#define        CONFIG_MII
-#define        CONFIG_FEC_XCV_TYPE             RMII
+#define CONFIG_ETHPRIME                        "FEC0"
+#define CONFIG_FEC_MXC
+#define CONFIG_MII
+#define CONFIG_FEC_XCV_TYPE            RMII
 #endif
 
 /*
  * I2C
  */
 #ifdef CONFIG_CMD_I2C
-#define        CONFIG_I2C_MXS
-#define        CONFIG_HARD_I2C
-#define        CONFIG_SYS_I2C_SPEED            400000
+#define CONFIG_I2C_MXS
+#define CONFIG_HARD_I2C
+#define CONFIG_SYS_I2C_SPEED           400000
 #endif
 
 /*
  * EEPROM
  */
 #ifdef CONFIG_CMD_EEPROM
-#define        CONFIG_SYS_I2C_MULTI_EEPROMS
-#define        CONFIG_SYS_I2C_EEPROM_ADDR_LEN  2
+#define CONFIG_SYS_I2C_MULTI_EEPROMS
+#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2
 #endif
 
 /*
  */
 #ifdef CONFIG_CMD_DATE
 /* Use the internal RTC in the MXS chip */
-#define        CONFIG_RTC_INTERNAL
+#define CONFIG_RTC_INTERNAL
 #ifdef CONFIG_RTC_INTERNAL
-#define        CONFIG_RTC_MXS
+#define CONFIG_RTC_MXS
 #else
-#define        CONFIG_RTC_M41T62
-#define        CONFIG_SYS_I2C_RTC_ADDR         0x68
-#define        CONFIG_SYS_M41T11_BASE_YEAR     2000
+#define CONFIG_RTC_M41T62
+#define CONFIG_SYS_I2C_RTC_ADDR                0x68
+#define CONFIG_SYS_M41T11_BASE_YEAR    2000
 #endif
 #endif
 
  * USB
  */
 #ifdef CONFIG_CMD_USB
-#define        CONFIG_USB_EHCI
-#define        CONFIG_USB_EHCI_MXS
+#define CONFIG_USB_EHCI
+#define CONFIG_USB_EHCI_MXS
 #define CONFIG_EHCI_MXS_PORT0
 #define CONFIG_EHCI_MXS_PORT1
 #define CONFIG_USB_MAX_CONTROLLER_COUNT        2
-#define        CONFIG_EHCI_IS_TDI
-#define        CONFIG_USB_STORAGE
+#define CONFIG_EHCI_IS_TDI
+#define CONFIG_USB_STORAGE
 #endif
 
 /*
  * SPI
  */
 #ifdef CONFIG_CMD_SPI
-#define        CONFIG_HARD_SPI
-#define        CONFIG_MXS_SPI
-#define        CONFIG_SPI_HALF_DUPLEX
-#define        CONFIG_DEFAULT_SPI_BUS          2
-#define        CONFIG_DEFAULT_SPI_CS           0
-#define        CONFIG_DEFAULT_SPI_MODE         SPI_MODE_0
+#define CONFIG_HARD_SPI
+#define CONFIG_MXS_SPI
+#define CONFIG_SPI_HALF_DUPLEX
+#define CONFIG_DEFAULT_SPI_BUS         2
+#define CONFIG_DEFAULT_SPI_CS          0
+#define CONFIG_DEFAULT_SPI_MODE                SPI_MODE_0
 
 /* SPI FLASH */
 #ifdef CONFIG_CMD_SF
-#define        CONFIG_SPI_FLASH
-#define        CONFIG_SPI_FLASH_STMICRO
-#define        CONFIG_SF_DEFAULT_BUS           2
-#define        CONFIG_SF_DEFAULT_CS            0
-#define        CONFIG_SF_DEFAULT_SPEED         40000000
-#define        CONFIG_SF_DEFAULT_MODE          SPI_MODE_0
+#define CONFIG_SPI_FLASH
+#define CONFIG_SPI_FLASH_STMICRO
+#define CONFIG_SF_DEFAULT_BUS          2
+#define CONFIG_SF_DEFAULT_CS           0
+#define CONFIG_SF_DEFAULT_SPEED                40000000
+#define CONFIG_SF_DEFAULT_MODE         SPI_MODE_0
 
-#define        CONFIG_ENV_SPI_BUS              2
-#define        CONFIG_ENV_SPI_CS               0
-#define        CONFIG_ENV_SPI_MAX_HZ           40000000
-#define        CONFIG_ENV_SPI_MODE             SPI_MODE_0
+#define CONFIG_ENV_SPI_BUS             2
+#define CONFIG_ENV_SPI_CS              0
+#define CONFIG_ENV_SPI_MAX_HZ          40000000
+#define CONFIG_ENV_SPI_MODE            SPI_MODE_0
 #endif
 #endif
 
 /*
  * Boot Linux
  */
-#define        CONFIG_CMDLINE_TAG
-#define        CONFIG_SETUP_MEMORY_TAGS
-#define        CONFIG_BOOTDELAY        3
-#define        CONFIG_BOOTFILE         "uImage"
-#define        CONFIG_BOOTARGS         "console=ttyAMA0,115200n8 "
-#define        CONFIG_BOOTCOMMAND      "run bootcmd_net"
-#define        CONFIG_LOADADDR         0x42000000
-#define        CONFIG_SYS_LOAD_ADDR    CONFIG_LOADADDR
-#define        CONFIG_OF_LIBFDT
+#define CONFIG_CMDLINE_TAG
+#define CONFIG_SETUP_MEMORY_TAGS
+#define CONFIG_BOOTDELAY       3
+#define CONFIG_BOOTFILE                "uImage"
+#define CONFIG_BOOTARGS                "console=ttyAMA0,115200n8 "
+#define CONFIG_BOOTCOMMAND     "run bootcmd_net"
+#define CONFIG_LOADADDR                0x42000000
+#define CONFIG_SYS_LOAD_ADDR   CONFIG_LOADADDR
+#define CONFIG_OF_LIBFDT
 
 /*
  * Extra Environments
  */
-#define        CONFIG_EXTRA_ENV_SETTINGS                                       \
+#define CONFIG_EXTRA_ENV_SETTINGS                                      \
        "update_nand_full_filename=u-boot.nand\0"                       \
        "update_nand_firmware_filename=u-boot.sb\0"                     \
        "update_sd_firmware_filename=u-boot.sd\0"                       \