source procps/Config.in
source shell/Config.in
source sysklogd/Config.in
+source libbb/Config.in
menu 'Debugging Options'
help
md5sum is used to print or check MD5 checksums.
-config CONFIG_MD5SUM_SIZE_VS_SPEED
- int " Trade Bytes for Speed"
- default 2
- range 0 3
- depends on CONFIG_MD5SUM
- help
- Trade binary size versus speed for the md5sum algorithm.
- Approximate values running uClibc and hashing
- linux-2.4.4.tar.bz2 were:
- user times (sec) text size (386)
- 0 (fastest) 1.1 6144
- 1 1.4 5392
- 2 3.0 5088
- 3 (smallest) 5.1 4912
-
config CONFIG_MKDIR
bool "mkdir"
default n
#include "busybox.h"
+typedef enum { HASH_SHA1, HASH_MD5 } hash_algo_t;
#define FLAG_SILENT 1
#define FLAG_CHECK 2
return (hex_value);
}
-static uint8_t *hash_file(const char *filename, uint8_t hash_algo)
+static uint8_t *hash_file(const char *filename, hash_algo_t hash_algo)
{
- int src_fd = strcmp(filename, "-") == 0 ? STDIN_FILENO :
- open(filename, O_RDONLY);
- if (src_fd == -1) {
+ int src_fd, hash_len, count;
+ union _ctx_ {
+ sha1_ctx_t sha1;
+ md5_ctx_t md5;
+ } context;
+ uint8_t *hash_value = NULL;
+ RESERVE_CONFIG_UBUFFER(in_buf, 4096);
+ void (*update)(const void*, size_t, void*);
+ void (*final)(void*, void*);
+
+ if(strcmp(filename, "-") == 0) {
+ src_fd = STDIN_FILENO;
+ } else if(0 > (src_fd = open(filename, O_RDONLY))) {
bb_perror_msg("%s", filename);
return NULL;
+ }
+
+ // figure specific hash algorithims
+ if(ENABLE_MD5SUM && hash_algo==HASH_MD5) {
+ md5_begin(&context.md5);
+ update = (void (*)(const void*, size_t, void*))md5_hash;
+ final = (void (*)(void*, void*))md5_end;
+ hash_len = 16;
+ } else if(ENABLE_SHA1SUM && hash_algo==HASH_SHA1) {
+ sha1_begin(&context.sha1);
+ update = (void (*)(const void*, size_t, void*))sha1_hash;
+ final = (void (*)(void*, void*))sha1_end;
+ hash_len = 20;
} else {
- uint8_t *hash_value;
- RESERVE_CONFIG_UBUFFER(hash_value_bin, 20);
- hash_value = hash_fd(src_fd, -1, hash_algo, hash_value_bin) != -2 ?
- hash_bin_to_hex(hash_value_bin, hash_algo == HASH_MD5 ? 16 : 20) :
- NULL;
- RELEASE_CONFIG_BUFFER(hash_value_bin);
+ bb_error_msg_and_die("algotithm not supported");
+ }
+
+
+ while(0 < (count = read(src_fd, in_buf, sizeof in_buf))) {
+ update(in_buf, count, &context);
+ }
+
+ if(count == 0) {
+ final(in_buf, &context);
+ hash_value = hash_bin_to_hex(in_buf, hash_len);
+ }
+
+ RELEASE_CONFIG_BUFFER(in_buf);
+
+ if(src_fd != STDIN_FILENO) {
close(src_fd);
- return hash_value;
}
+
+ return hash_value;
}
/* This could become a common function for md5 as well, by using md5_stream */
-static int hash_files(int argc, char **argv, const uint8_t hash_algo)
+static int hash_files(int argc, char **argv, hash_algo_t hash_algo)
{
int return_value = EXIT_SUCCESS;
uint8_t *hash_value;
-
-#ifdef CONFIG_FEATURE_MD5_SHA1_SUM_CHECK
unsigned int flags;
- flags = bb_getopt_ulflags(argc, argv, "scw");
-#endif
+ if (ENABLE_FEATURE_MD5_SHA1_SUM_CHECK)
+ flags = bb_getopt_ulflags(argc, argv, "scw");
-#ifdef CONFIG_FEATURE_MD5_SHA1_SUM_CHECK
- if (!(flags & FLAG_CHECK)) {
+ if (ENABLE_FEATURE_MD5_SHA1_SUM_CHECK && !(flags & FLAG_CHECK)) {
if (flags & FLAG_SILENT) {
bb_error_msg_and_die
("the -s option is meaningful only when verifying checksums");
("the -w option is meaningful only when verifying checksums");
}
}
-#endif
if (argc == optind) {
argv[argc++] = "-";
}
-#ifdef CONFIG_FEATURE_MD5_SHA1_SUM_CHECK
- if (flags & FLAG_CHECK) {
+
+ if (ENABLE_FEATURE_MD5_SHA1_SUM_CHECK && flags & FLAG_CHECK) {
FILE *pre_computed_stream;
int count_total = 0;
int count_failed = 0;
if (bb_fclose_nonstdin(pre_computed_stream) == EOF) {
bb_perror_msg_and_die("Couldnt close file %s", file_ptr);
}
- } else
-#endif
- {
+ } else {
while (optind < argc) {
char *file_ptr = argv[optind++];
extern int get_terminal_width_height(int fd, int *width, int *height);
extern unsigned long get_ug_id(const char *s, long (*__bb_getxxnam)(const char *));
-#define HASH_SHA1 1
-#define HASH_MD5 2
-extern int hash_fd(int fd, const size_t size, const uint8_t hash_algo, uint8_t *hashval);
+typedef struct _sha1_ctx_t_ {
+ uint32_t count[2];
+ uint32_t hash[5];
+ uint32_t wbuf[16];
+} sha1_ctx_t;
+
+void sha1_begin(sha1_ctx_t *ctx);
+void sha1_hash(const void *data, size_t length, sha1_ctx_t *ctx);
+void *sha1_end(void *resbuf, sha1_ctx_t *ctx);
+
+typedef struct _md5_ctx_t_ {
+ uint32_t A;
+ uint32_t B;
+ uint32_t C;
+ uint32_t D;
+ uint32_t total[2];
+ uint32_t buflen;
+ char buffer[128];
+} md5_ctx_t;
+
+void md5_begin(md5_ctx_t *ctx);
+void md5_hash(const void *data, size_t length, md5_ctx_t *ctx);
+void *md5_end(void *resbuf, md5_ctx_t *ctx);
/* busybox.h will include dmalloc later for us, else include it here. */
#if !defined _BB_INTERNAL_H_ && defined DMALLOC
# endif
#endif
+/* ---- Endian Detection ------------------------------------ */
+#ifndef __APPLE__
+ #include <byteswap.h>
+ #include <endian.h>
+#endif
+
+#ifdef __BIG_ENDIAN__
+ #define BB_BIG_ENDIAN 1
+#elif __BYTE_ORDER == __BIG_ENDIAN
+ #define BB_BIG_ENDIAN 1
+#else
+ #define BB_BIG_ENDIAN 0
+#endif
+
+
#endif /* platform.h */
--- /dev/null
+#
+# For a description of the syntax of this configuration file,
+# see scripts/kbuild/config-language.txt.
+#
+
+menu "Busybox Library Tuning"
+
+config CONFIG_MD5_SIZE_VS_SPEED
+ int " MD5: Trade Bytes for Speed"
+ default 2
+ range 0 3
+ help
+ Trade binary size versus speed for the md5sum algorithm.
+ Approximate values running uClibc and hashing
+ linux-2.4.4.tar.bz2 were:
+ user times (sec) text size (386)
+ 0 (fastest) 1.1 6144
+ 1 1.4 5392
+ 2 3.0 5088
+ 3 (smallest) 5.1 4912
+
+endmenu
+++ /dev/null
-/*
- * Based on shasum from http://www.netsw.org/crypto/hash/
- * Majorly hacked up to use Dr Brian Gladman's sha1 code
- *
- * Copyright (C) 2003 Glenn L. McGrath
- * Copyright (C) 2003 Erik Andersen
- *
- * Licensed under the GPL v2 or later, see the file LICENSE in this tarball.
- */
-
-#include <byteswap.h>
-#include <endian.h>
-#include <fcntl.h>
-#include <limits.h>
-#include <stdio.h>
-#include <stdint.h>
-#include <stdlib.h>
-#include <string.h>
-#include <unistd.h>
-
-#include "busybox.h"
-
-
-#ifdef CONFIG_SHA1SUM
-/*
- ---------------------------------------------------------------------------
- Begin Dr. Gladman's sha1 code
- ---------------------------------------------------------------------------
-*/
-
-/*
- ---------------------------------------------------------------------------
- Copyright (c) 2002, Dr Brian Gladman <brg@gladman.me.uk>, Worcester, UK.
- All rights reserved.
-
- LICENSE TERMS
-
- The free distribution and use of this software in both source and binary
- form is allowed (with or without changes) provided that:
-
- 1. distributions of this source code include the above copyright
- notice, this list of conditions and the following disclaimer;
-
- 2. distributions in binary form include the above copyright
- notice, this list of conditions and the following disclaimer
- in the documentation and/or other associated materials;
-
- 3. the copyright holder's name is not used to endorse products
- built using this software without specific written permission.
-
- ALTERNATIVELY, provided that this notice is retained in full, this product
- may be distributed under the terms of the GNU General Public License (GPL),
- in which case the provisions of the GPL apply INSTEAD OF those given above.
-
- DISCLAIMER
-
- This software is provided 'as is' with no explicit or implied warranties
- in respect of its properties, including, but not limited to, correctness
- and/or fitness for purpose.
- ---------------------------------------------------------------------------
- Issue Date: 10/11/2002
-
- This is a byte oriented version of SHA1 that operates on arrays of bytes
- stored in memory. It runs at 22 cycles per byte on a Pentium P4 processor
-*/
-
-# define SHA1_BLOCK_SIZE 64
-# define SHA1_DIGEST_SIZE 20
-# define SHA1_HASH_SIZE SHA1_DIGEST_SIZE
-# define SHA2_GOOD 0
-# define SHA2_BAD 1
-
-# define rotl32(x,n) (((x) << n) | ((x) >> (32 - n)))
-
-# if __BYTE_ORDER == __BIG_ENDIAN
-# define swap_b32(x) (x)
-# elif defined(bswap_32)
-# define swap_b32(x) bswap_32(x)
-# else
-# define swap_b32(x) ((rotl32((x), 8) & 0x00ff00ff) | (rotl32((x), 24) & 0xff00ff00))
-# endif /* __BYTE_ORDER */
-
-# define SHA1_MASK (SHA1_BLOCK_SIZE - 1)
-
-/* reverse byte order in 32-bit words */
-#define ch(x,y,z) ((z) ^ ((x) & ((y) ^ (z))))
-#define parity(x,y,z) ((x) ^ (y) ^ (z))
-#define maj(x,y,z) (((x) & (y)) | ((z) & ((x) | (y))))
-
-/* A normal version as set out in the FIPS. This version uses */
-/* partial loop unrolling and is optimised for the Pentium 4 */
-# define rnd(f,k) \
- t = a; a = rotl32(a,5) + f(b,c,d) + e + k + w[i]; \
- e = d; d = c; c = rotl32(b, 30); b = t
-
-/* type to hold the SHA1 context */
-struct sha1_ctx_t {
- uint32_t count[2];
- uint32_t hash[5];
- uint32_t wbuf[16];
-};
-
-static void sha1_compile(struct sha1_ctx_t *ctx)
-{
- uint32_t w[80], i, a, b, c, d, e, t;
-
- /* note that words are compiled from the buffer into 32-bit */
- /* words in big-endian order so an order reversal is needed */
- /* here on little endian machines */
- for (i = 0; i < SHA1_BLOCK_SIZE / 4; ++i)
- w[i] = swap_b32(ctx->wbuf[i]);
-
- for (i = SHA1_BLOCK_SIZE / 4; i < 80; ++i)
- w[i] = rotl32(w[i - 3] ^ w[i - 8] ^ w[i - 14] ^ w[i - 16], 1);
-
- a = ctx->hash[0];
- b = ctx->hash[1];
- c = ctx->hash[2];
- d = ctx->hash[3];
- e = ctx->hash[4];
-
- for (i = 0; i < 20; ++i) {
- rnd(ch, 0x5a827999);
- }
-
- for (i = 20; i < 40; ++i) {
- rnd(parity, 0x6ed9eba1);
- }
-
- for (i = 40; i < 60; ++i) {
- rnd(maj, 0x8f1bbcdc);
- }
-
- for (i = 60; i < 80; ++i) {
- rnd(parity, 0xca62c1d6);
- }
-
- ctx->hash[0] += a;
- ctx->hash[1] += b;
- ctx->hash[2] += c;
- ctx->hash[3] += d;
- ctx->hash[4] += e;
-}
-
-static void sha1_begin(struct sha1_ctx_t *ctx)
-{
- ctx->count[0] = ctx->count[1] = 0;
- ctx->hash[0] = 0x67452301;
- ctx->hash[1] = 0xefcdab89;
- ctx->hash[2] = 0x98badcfe;
- ctx->hash[3] = 0x10325476;
- ctx->hash[4] = 0xc3d2e1f0;
-}
-
-/* SHA1 hash data in an array of bytes into hash buffer and call the */
-/* hash_compile function as required. */
-static void sha1_hash(const void *data, size_t len, void *ctx_v)
-{
- struct sha1_ctx_t *ctx = (struct sha1_ctx_t *) ctx_v;
- uint32_t pos = (uint32_t) (ctx->count[0] & SHA1_MASK);
- uint32_t freeb = SHA1_BLOCK_SIZE - pos;
- const unsigned char *sp = data;
-
- if ((ctx->count[0] += len) < len)
- ++(ctx->count[1]);
-
- while (len >= freeb) { /* tranfer whole blocks while possible */
- memcpy(((unsigned char *) ctx->wbuf) + pos, sp, freeb);
- sp += freeb;
- len -= freeb;
- freeb = SHA1_BLOCK_SIZE;
- pos = 0;
- sha1_compile(ctx);
- }
-
- memcpy(((unsigned char *) ctx->wbuf) + pos, sp, len);
-}
-
-/* SHA1 Final padding and digest calculation */
-# if __BYTE_ORDER == __LITTLE_ENDIAN
-static uint32_t mask[4] = { 0x00000000, 0x000000ff, 0x0000ffff, 0x00ffffff };
-static uint32_t bits[4] = { 0x00000080, 0x00008000, 0x00800000, 0x80000000 };
-# else
-static uint32_t mask[4] = { 0x00000000, 0xff000000, 0xffff0000, 0xffffff00 };
-static uint32_t bits[4] = { 0x80000000, 0x00800000, 0x00008000, 0x00000080 };
-# endif /* __BYTE_ORDER */
-
-static void sha1_end(unsigned char hval[], struct sha1_ctx_t *ctx)
-{
- uint32_t i, cnt = (uint32_t) (ctx->count[0] & SHA1_MASK);
-
- /* mask out the rest of any partial 32-bit word and then set */
- /* the next byte to 0x80. On big-endian machines any bytes in */
- /* the buffer will be at the top end of 32 bit words, on little */
- /* endian machines they will be at the bottom. Hence the AND */
- /* and OR masks above are reversed for little endian systems */
- ctx->wbuf[cnt >> 2] =
- (ctx->wbuf[cnt >> 2] & mask[cnt & 3]) | bits[cnt & 3];
-
- /* we need 9 or more empty positions, one for the padding byte */
- /* (above) and eight for the length count. If there is not */
- /* enough space pad and empty the buffer */
- if (cnt > SHA1_BLOCK_SIZE - 9) {
- if (cnt < 60)
- ctx->wbuf[15] = 0;
- sha1_compile(ctx);
- cnt = 0;
- } else /* compute a word index for the empty buffer positions */
- cnt = (cnt >> 2) + 1;
-
- while (cnt < 14) /* and zero pad all but last two positions */
- ctx->wbuf[cnt++] = 0;
-
- /* assemble the eight byte counter in the buffer in big-endian */
- /* format */
-
- ctx->wbuf[14] = swap_b32((ctx->count[1] << 3) | (ctx->count[0] >> 29));
- ctx->wbuf[15] = swap_b32(ctx->count[0] << 3);
-
- sha1_compile(ctx);
-
- /* extract the hash value as bytes in case the hash buffer is */
- /* misaligned for 32-bit words */
-
- for (i = 0; i < SHA1_DIGEST_SIZE; ++i)
- hval[i] = (unsigned char) (ctx->hash[i >> 2] >> 8 * (~i & 3));
-}
-
-/*
- ---------------------------------------------------------------------------
- End of Dr. Gladman's sha1 code
- ---------------------------------------------------------------------------
-*/
-#endif /* CONFIG_SHA1 */
-
-
-
-
-
-#ifdef CONFIG_MD5SUM
-/*
- * md5sum.c - Compute MD5 checksum of files or strings according to the
- * definition of MD5 in RFC 1321 from April 1992.
- *
- * Copyright (C) 1995-1999 Free Software Foundation, Inc.
- * Written by Ulrich Drepper <drepper@gnu.ai.mit.edu>, 1995.
- *
- *
- * June 29, 2001 Manuel Novoa III
- *
- * Added MD5SUM_SIZE_VS_SPEED configuration option.
- *
- * Current valid values, with data from my system for comparison, are:
- * (using uClibc and running on linux-2.4.4.tar.bz2)
- * user times (sec) text size (386)
- * 0 (fastest) 1.1 6144
- * 1 1.4 5392
- * 2 3.0 5088
- * 3 (smallest) 5.1 4912
- */
-
-# if CONFIG_MD5SUM_SIZE_VS_SPEED < 0 || CONFIG_MD5SUM_SIZE_VS_SPEED > 3
-# define MD5SUM_SIZE_VS_SPEED 2
-# else
-# define MD5SUM_SIZE_VS_SPEED CONFIG_MD5SUM_SIZE_VS_SPEED
-# endif
-
-/* Handle endian-ness */
-# if __BYTE_ORDER == __LITTLE_ENDIAN
-# define SWAP(n) (n)
-# elif defined(bswap_32)
-# define SWAP(n) bswap_32(n)
-# else
-# define SWAP(n) ((n << 24) | ((n&65280)<<8) | ((n&16711680)>>8) | (n>>24))
-# endif
-
-# if MD5SUM_SIZE_VS_SPEED == 0
-/* This array contains the bytes used to pad the buffer to the next
- 64-byte boundary. (RFC 1321, 3.1: Step 1) */
-static const unsigned char fillbuf[64] = { 0x80, 0 /* , 0, 0, ... */ };
-# endif /* MD5SUM_SIZE_VS_SPEED == 0 */
-
-/* Structure to save state of computation between the single steps. */
-struct md5_ctx_t {
- uint32_t A;
- uint32_t B;
- uint32_t C;
- uint32_t D;
- uint32_t total[2];
- uint32_t buflen;
- char buffer[128];
-};
-
-/* Initialize structure containing state of computation.
- * (RFC 1321, 3.3: Step 3)
- */
-static void md5_begin(struct md5_ctx_t *ctx)
-{
- ctx->A = 0x67452301;
- ctx->B = 0xefcdab89;
- ctx->C = 0x98badcfe;
- ctx->D = 0x10325476;
-
- ctx->total[0] = ctx->total[1] = 0;
- ctx->buflen = 0;
-}
-
-/* These are the four functions used in the four steps of the MD5 algorithm
- * and defined in the RFC 1321. The first function is a little bit optimized
- * (as found in Colin Plumbs public domain implementation).
- * #define FF(b, c, d) ((b & c) | (~b & d))
- */
-# define FF(b, c, d) (d ^ (b & (c ^ d)))
-# define FG(b, c, d) FF (d, b, c)
-# define FH(b, c, d) (b ^ c ^ d)
-# define FI(b, c, d) (c ^ (b | ~d))
-
-/* Starting with the result of former calls of this function (or the
- * initialization function update the context for the next LEN bytes
- * starting at BUFFER.
- * It is necessary that LEN is a multiple of 64!!!
- */
-static void md5_hash_block(const void *buffer, size_t len, struct md5_ctx_t *ctx)
-{
- uint32_t correct_words[16];
- const uint32_t *words = buffer;
- size_t nwords = len / sizeof(uint32_t);
- const uint32_t *endp = words + nwords;
-
-# if MD5SUM_SIZE_VS_SPEED > 0
- static const uint32_t C_array[] = {
- /* round 1 */
- 0xd76aa478, 0xe8c7b756, 0x242070db, 0xc1bdceee,
- 0xf57c0faf, 0x4787c62a, 0xa8304613, 0xfd469501,
- 0x698098d8, 0x8b44f7af, 0xffff5bb1, 0x895cd7be,
- 0x6b901122, 0xfd987193, 0xa679438e, 0x49b40821,
- /* round 2 */
- 0xf61e2562, 0xc040b340, 0x265e5a51, 0xe9b6c7aa,
- 0xd62f105d, 0x2441453, 0xd8a1e681, 0xe7d3fbc8,
- 0x21e1cde6, 0xc33707d6, 0xf4d50d87, 0x455a14ed,
- 0xa9e3e905, 0xfcefa3f8, 0x676f02d9, 0x8d2a4c8a,
- /* round 3 */
- 0xfffa3942, 0x8771f681, 0x6d9d6122, 0xfde5380c,
- 0xa4beea44, 0x4bdecfa9, 0xf6bb4b60, 0xbebfbc70,
- 0x289b7ec6, 0xeaa127fa, 0xd4ef3085, 0x4881d05,
- 0xd9d4d039, 0xe6db99e5, 0x1fa27cf8, 0xc4ac5665,
- /* round 4 */
- 0xf4292244, 0x432aff97, 0xab9423a7, 0xfc93a039,
- 0x655b59c3, 0x8f0ccc92, 0xffeff47d, 0x85845dd1,
- 0x6fa87e4f, 0xfe2ce6e0, 0xa3014314, 0x4e0811a1,
- 0xf7537e82, 0xbd3af235, 0x2ad7d2bb, 0xeb86d391
- };
-
- static const char P_array[] = {
-# if MD5SUM_SIZE_VS_SPEED > 1
- 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, /* 1 */
-# endif /* MD5SUM_SIZE_VS_SPEED > 1 */
- 1, 6, 11, 0, 5, 10, 15, 4, 9, 14, 3, 8, 13, 2, 7, 12, /* 2 */
- 5, 8, 11, 14, 1, 4, 7, 10, 13, 0, 3, 6, 9, 12, 15, 2, /* 3 */
- 0, 7, 14, 5, 12, 3, 10, 1, 8, 15, 6, 13, 4, 11, 2, 9 /* 4 */
- };
-
-# if MD5SUM_SIZE_VS_SPEED > 1
- static const char S_array[] = {
- 7, 12, 17, 22,
- 5, 9, 14, 20,
- 4, 11, 16, 23,
- 6, 10, 15, 21
- };
-# endif /* MD5SUM_SIZE_VS_SPEED > 1 */
-# endif
-
- uint32_t A = ctx->A;
- uint32_t B = ctx->B;
- uint32_t C = ctx->C;
- uint32_t D = ctx->D;
-
- /* First increment the byte count. RFC 1321 specifies the possible
- length of the file up to 2^64 bits. Here we only compute the
- number of bytes. Do a double word increment. */
- ctx->total[0] += len;
- if (ctx->total[0] < len)
- ++ctx->total[1];
-
- /* Process all bytes in the buffer with 64 bytes in each round of
- the loop. */
- while (words < endp) {
- uint32_t *cwp = correct_words;
- uint32_t A_save = A;
- uint32_t B_save = B;
- uint32_t C_save = C;
- uint32_t D_save = D;
-
-# if MD5SUM_SIZE_VS_SPEED > 1
-# define CYCLIC(w, s) (w = (w << s) | (w >> (32 - s)))
-
- const uint32_t *pc;
- const char *pp;
- const char *ps;
- int i;
- uint32_t temp;
-
- for (i = 0; i < 16; i++) {
- cwp[i] = SWAP(words[i]);
- }
- words += 16;
-
-# if MD5SUM_SIZE_VS_SPEED > 2
- pc = C_array;
- pp = P_array;
- ps = S_array - 4;
-
- for (i = 0; i < 64; i++) {
- if ((i & 0x0f) == 0)
- ps += 4;
- temp = A;
- switch (i >> 4) {
- case 0:
- temp += FF(B, C, D);
- break;
- case 1:
- temp += FG(B, C, D);
- break;
- case 2:
- temp += FH(B, C, D);
- break;
- case 3:
- temp += FI(B, C, D);
- }
- temp += cwp[(int) (*pp++)] + *pc++;
- CYCLIC(temp, ps[i & 3]);
- temp += B;
- A = D;
- D = C;
- C = B;
- B = temp;
- }
-# else
- pc = C_array;
- pp = P_array;
- ps = S_array;
-
- for (i = 0; i < 16; i++) {
- temp = A + FF(B, C, D) + cwp[(int) (*pp++)] + *pc++;
- CYCLIC(temp, ps[i & 3]);
- temp += B;
- A = D;
- D = C;
- C = B;
- B = temp;
- }
-
- ps += 4;
- for (i = 0; i < 16; i++) {
- temp = A + FG(B, C, D) + cwp[(int) (*pp++)] + *pc++;
- CYCLIC(temp, ps[i & 3]);
- temp += B;
- A = D;
- D = C;
- C = B;
- B = temp;
- }
- ps += 4;
- for (i = 0; i < 16; i++) {
- temp = A + FH(B, C, D) + cwp[(int) (*pp++)] + *pc++;
- CYCLIC(temp, ps[i & 3]);
- temp += B;
- A = D;
- D = C;
- C = B;
- B = temp;
- }
- ps += 4;
- for (i = 0; i < 16; i++) {
- temp = A + FI(B, C, D) + cwp[(int) (*pp++)] + *pc++;
- CYCLIC(temp, ps[i & 3]);
- temp += B;
- A = D;
- D = C;
- C = B;
- B = temp;
- }
-
-# endif /* MD5SUM_SIZE_VS_SPEED > 2 */
-# else
- /* First round: using the given function, the context and a constant
- the next context is computed. Because the algorithms processing
- unit is a 32-bit word and it is determined to work on words in
- little endian byte order we perhaps have to change the byte order
- before the computation. To reduce the work for the next steps
- we store the swapped words in the array CORRECT_WORDS. */
-
-# define OP(a, b, c, d, s, T) \
- do \
- { \
- a += FF (b, c, d) + (*cwp++ = SWAP (*words)) + T; \
- ++words; \
- CYCLIC (a, s); \
- a += b; \
- } \
- while (0)
-
- /* It is unfortunate that C does not provide an operator for
- cyclic rotation. Hope the C compiler is smart enough. */
- /* gcc 2.95.4 seems to be --aaronl */
-# define CYCLIC(w, s) (w = (w << s) | (w >> (32 - s)))
-
- /* Before we start, one word to the strange constants.
- They are defined in RFC 1321 as
-
- T[i] = (int) (4294967296.0 * fabs (sin (i))), i=1..64
- */
-
-# if MD5SUM_SIZE_VS_SPEED == 1
- const uint32_t *pc;
- const char *pp;
- int i;
-# endif /* MD5SUM_SIZE_VS_SPEED */
-
- /* Round 1. */
-# if MD5SUM_SIZE_VS_SPEED == 1
- pc = C_array;
- for (i = 0; i < 4; i++) {
- OP(A, B, C, D, 7, *pc++);
- OP(D, A, B, C, 12, *pc++);
- OP(C, D, A, B, 17, *pc++);
- OP(B, C, D, A, 22, *pc++);
- }
-# else
- OP(A, B, C, D, 7, 0xd76aa478);
- OP(D, A, B, C, 12, 0xe8c7b756);
- OP(C, D, A, B, 17, 0x242070db);
- OP(B, C, D, A, 22, 0xc1bdceee);
- OP(A, B, C, D, 7, 0xf57c0faf);
- OP(D, A, B, C, 12, 0x4787c62a);
- OP(C, D, A, B, 17, 0xa8304613);
- OP(B, C, D, A, 22, 0xfd469501);
- OP(A, B, C, D, 7, 0x698098d8);
- OP(D, A, B, C, 12, 0x8b44f7af);
- OP(C, D, A, B, 17, 0xffff5bb1);
- OP(B, C, D, A, 22, 0x895cd7be);
- OP(A, B, C, D, 7, 0x6b901122);
- OP(D, A, B, C, 12, 0xfd987193);
- OP(C, D, A, B, 17, 0xa679438e);
- OP(B, C, D, A, 22, 0x49b40821);
-# endif /* MD5SUM_SIZE_VS_SPEED == 1 */
-
- /* For the second to fourth round we have the possibly swapped words
- in CORRECT_WORDS. Redefine the macro to take an additional first
- argument specifying the function to use. */
-# undef OP
-# define OP(f, a, b, c, d, k, s, T) \
- do \
- { \
- a += f (b, c, d) + correct_words[k] + T; \
- CYCLIC (a, s); \
- a += b; \
- } \
- while (0)
-
- /* Round 2. */
-# if MD5SUM_SIZE_VS_SPEED == 1
- pp = P_array;
- for (i = 0; i < 4; i++) {
- OP(FG, A, B, C, D, (int) (*pp++), 5, *pc++);
- OP(FG, D, A, B, C, (int) (*pp++), 9, *pc++);
- OP(FG, C, D, A, B, (int) (*pp++), 14, *pc++);
- OP(FG, B, C, D, A, (int) (*pp++), 20, *pc++);
- }
-# else
- OP(FG, A, B, C, D, 1, 5, 0xf61e2562);
- OP(FG, D, A, B, C, 6, 9, 0xc040b340);
- OP(FG, C, D, A, B, 11, 14, 0x265e5a51);
- OP(FG, B, C, D, A, 0, 20, 0xe9b6c7aa);
- OP(FG, A, B, C, D, 5, 5, 0xd62f105d);
- OP(FG, D, A, B, C, 10, 9, 0x02441453);
- OP(FG, C, D, A, B, 15, 14, 0xd8a1e681);
- OP(FG, B, C, D, A, 4, 20, 0xe7d3fbc8);
- OP(FG, A, B, C, D, 9, 5, 0x21e1cde6);
- OP(FG, D, A, B, C, 14, 9, 0xc33707d6);
- OP(FG, C, D, A, B, 3, 14, 0xf4d50d87);
- OP(FG, B, C, D, A, 8, 20, 0x455a14ed);
- OP(FG, A, B, C, D, 13, 5, 0xa9e3e905);
- OP(FG, D, A, B, C, 2, 9, 0xfcefa3f8);
- OP(FG, C, D, A, B, 7, 14, 0x676f02d9);
- OP(FG, B, C, D, A, 12, 20, 0x8d2a4c8a);
-# endif /* MD5SUM_SIZE_VS_SPEED == 1 */
-
- /* Round 3. */
-# if MD5SUM_SIZE_VS_SPEED == 1
- for (i = 0; i < 4; i++) {
- OP(FH, A, B, C, D, (int) (*pp++), 4, *pc++);
- OP(FH, D, A, B, C, (int) (*pp++), 11, *pc++);
- OP(FH, C, D, A, B, (int) (*pp++), 16, *pc++);
- OP(FH, B, C, D, A, (int) (*pp++), 23, *pc++);
- }
-# else
- OP(FH, A, B, C, D, 5, 4, 0xfffa3942);
- OP(FH, D, A, B, C, 8, 11, 0x8771f681);
- OP(FH, C, D, A, B, 11, 16, 0x6d9d6122);
- OP(FH, B, C, D, A, 14, 23, 0xfde5380c);
- OP(FH, A, B, C, D, 1, 4, 0xa4beea44);
- OP(FH, D, A, B, C, 4, 11, 0x4bdecfa9);
- OP(FH, C, D, A, B, 7, 16, 0xf6bb4b60);
- OP(FH, B, C, D, A, 10, 23, 0xbebfbc70);
- OP(FH, A, B, C, D, 13, 4, 0x289b7ec6);
- OP(FH, D, A, B, C, 0, 11, 0xeaa127fa);
- OP(FH, C, D, A, B, 3, 16, 0xd4ef3085);
- OP(FH, B, C, D, A, 6, 23, 0x04881d05);
- OP(FH, A, B, C, D, 9, 4, 0xd9d4d039);
- OP(FH, D, A, B, C, 12, 11, 0xe6db99e5);
- OP(FH, C, D, A, B, 15, 16, 0x1fa27cf8);
- OP(FH, B, C, D, A, 2, 23, 0xc4ac5665);
-# endif /* MD5SUM_SIZE_VS_SPEED == 1 */
-
- /* Round 4. */
-# if MD5SUM_SIZE_VS_SPEED == 1
- for (i = 0; i < 4; i++) {
- OP(FI, A, B, C, D, (int) (*pp++), 6, *pc++);
- OP(FI, D, A, B, C, (int) (*pp++), 10, *pc++);
- OP(FI, C, D, A, B, (int) (*pp++), 15, *pc++);
- OP(FI, B, C, D, A, (int) (*pp++), 21, *pc++);
- }
-# else
- OP(FI, A, B, C, D, 0, 6, 0xf4292244);
- OP(FI, D, A, B, C, 7, 10, 0x432aff97);
- OP(FI, C, D, A, B, 14, 15, 0xab9423a7);
- OP(FI, B, C, D, A, 5, 21, 0xfc93a039);
- OP(FI, A, B, C, D, 12, 6, 0x655b59c3);
- OP(FI, D, A, B, C, 3, 10, 0x8f0ccc92);
- OP(FI, C, D, A, B, 10, 15, 0xffeff47d);
- OP(FI, B, C, D, A, 1, 21, 0x85845dd1);
- OP(FI, A, B, C, D, 8, 6, 0x6fa87e4f);
- OP(FI, D, A, B, C, 15, 10, 0xfe2ce6e0);
- OP(FI, C, D, A, B, 6, 15, 0xa3014314);
- OP(FI, B, C, D, A, 13, 21, 0x4e0811a1);
- OP(FI, A, B, C, D, 4, 6, 0xf7537e82);
- OP(FI, D, A, B, C, 11, 10, 0xbd3af235);
- OP(FI, C, D, A, B, 2, 15, 0x2ad7d2bb);
- OP(FI, B, C, D, A, 9, 21, 0xeb86d391);
-# endif /* MD5SUM_SIZE_VS_SPEED == 1 */
-# endif /* MD5SUM_SIZE_VS_SPEED > 1 */
-
- /* Add the starting values of the context. */
- A += A_save;
- B += B_save;
- C += C_save;
- D += D_save;
- }
-
- /* Put checksum in context given as argument. */
- ctx->A = A;
- ctx->B = B;
- ctx->C = C;
- ctx->D = D;
-}
-
-/* Starting with the result of former calls of this function (or the
- * initialization function update the context for the next LEN bytes
- * starting at BUFFER.
- * It is NOT required that LEN is a multiple of 64.
- */
-
-static void md5_hash_bytes(const void *buffer, size_t len, struct md5_ctx_t *ctx)
-{
- /* When we already have some bits in our internal buffer concatenate
- both inputs first. */
- if (ctx->buflen != 0) {
- size_t left_over = ctx->buflen;
- size_t add = 128 - left_over > len ? len : 128 - left_over;
-
- memcpy(&ctx->buffer[left_over], buffer, add);
- ctx->buflen += add;
-
- if (left_over + add > 64) {
- md5_hash_block(ctx->buffer, (left_over + add) & ~63, ctx);
- /* The regions in the following copy operation cannot overlap. */
- memcpy(ctx->buffer, &ctx->buffer[(left_over + add) & ~63],
- (left_over + add) & 63);
- ctx->buflen = (left_over + add) & 63;
- }
-
- buffer = (const char *) buffer + add;
- len -= add;
- }
-
- /* Process available complete blocks. */
- if (len > 64) {
- md5_hash_block(buffer, len & ~63, ctx);
- buffer = (const char *) buffer + (len & ~63);
- len &= 63;
- }
-
- /* Move remaining bytes in internal buffer. */
- if (len > 0) {
- memcpy(ctx->buffer, buffer, len);
- ctx->buflen = len;
- }
-}
-
-static void md5_hash(const void *buffer, size_t length, void *md5_ctx)
-{
- if (length % 64 == 0) {
- md5_hash_block(buffer, length, md5_ctx);
- } else {
- md5_hash_bytes(buffer, length, md5_ctx);
- }
-}
-
-/* Process the remaining bytes in the buffer and put result from CTX
- * in first 16 bytes following RESBUF. The result is always in little
- * endian byte order, so that a byte-wise output yields to the wanted
- * ASCII representation of the message digest.
- *
- * IMPORTANT: On some systems it is required that RESBUF is correctly
- * aligned for a 32 bits value.
- */
-static void *md5_end(void *resbuf, struct md5_ctx_t *ctx)
-{
- /* Take yet unprocessed bytes into account. */
- uint32_t bytes = ctx->buflen;
- size_t pad;
-
- /* Now count remaining bytes. */
- ctx->total[0] += bytes;
- if (ctx->total[0] < bytes)
- ++ctx->total[1];
-
- pad = bytes >= 56 ? 64 + 56 - bytes : 56 - bytes;
-# if MD5SUM_SIZE_VS_SPEED > 0
- memset(&ctx->buffer[bytes], 0, pad);
- ctx->buffer[bytes] = 0x80;
-# else
- memcpy(&ctx->buffer[bytes], fillbuf, pad);
-# endif /* MD5SUM_SIZE_VS_SPEED > 0 */
-
- /* Put the 64-bit file length in *bits* at the end of the buffer. */
- *(uint32_t *) & ctx->buffer[bytes + pad] = SWAP(ctx->total[0] << 3);
- *(uint32_t *) & ctx->buffer[bytes + pad + 4] =
- SWAP(((ctx->total[1] << 3) | (ctx->total[0] >> 29)));
-
- /* Process last bytes. */
- md5_hash_block(ctx->buffer, bytes + pad + 8, ctx);
-
- /* Put result from CTX in first 16 bytes following RESBUF. The result is
- * always in little endian byte order, so that a byte-wise output yields
- * to the wanted ASCII representation of the message digest.
- *
- * IMPORTANT: On some systems it is required that RESBUF is correctly
- * aligned for a 32 bits value.
- */
- ((uint32_t *) resbuf)[0] = SWAP(ctx->A);
- ((uint32_t *) resbuf)[1] = SWAP(ctx->B);
- ((uint32_t *) resbuf)[2] = SWAP(ctx->C);
- ((uint32_t *) resbuf)[3] = SWAP(ctx->D);
-
- return resbuf;
-}
-#endif /* CONFIG_MD5SUM */
-
-
-
-
-extern int hash_fd(int src_fd, const size_t size, const uint8_t hash_algo,
- uint8_t * hashval)
-{
- int result = EXIT_SUCCESS;
-// size_t hashed_count = 0;
- size_t blocksize = 0;
- size_t remaining = size;
- unsigned char *buffer = NULL;
- void (*hash_fn_ptr)(const void *, size_t, void *) = NULL;
- void *cx = NULL;
-
-#ifdef CONFIG_SHA1SUM
- struct sha1_ctx_t sha1_cx;
-#endif
-#ifdef CONFIG_MD5SUM
- struct md5_ctx_t md5_cx;
-#endif
-
-
-#ifdef CONFIG_SHA1SUM
- if (hash_algo == HASH_SHA1) {
- /* Ensure that BLOCKSIZE is a multiple of 64. */
- blocksize = 65536;
- buffer = xmalloc(blocksize);
- hash_fn_ptr = sha1_hash;
- cx = &sha1_cx;
- }
-#endif
-#ifdef CONFIG_MD5SUM
- if (hash_algo == HASH_MD5) {
- blocksize = 4096;
- buffer = xmalloc(blocksize + 72);
- hash_fn_ptr = md5_hash;
- cx = &md5_cx;
- }
-#endif
-
- /* Initialize the computation context. */
-#ifdef CONFIG_SHA1SUM
- if (hash_algo == HASH_SHA1) {
- sha1_begin(&sha1_cx);
- }
-#endif
-#ifdef CONFIG_MD5SUM
- if (hash_algo == HASH_MD5) {
- md5_begin(&md5_cx);
- }
-#endif
- /* Iterate over full file contents. */
- while ((remaining == (size_t) -1) || (remaining > 0)) {
- size_t read_try;
- ssize_t read_got;
-
- if (remaining > blocksize) {
- read_try = blocksize;
- } else {
- read_try = remaining;
- }
- read_got = bb_full_read(src_fd, buffer, read_try);
- if (read_got < 1) {
- /* count == 0 means short read
- * count == -1 means read error */
- result = read_got - 1;
- break;
- }
- if (remaining != (size_t) -1) {
- remaining -= read_got;
- }
-
- /* Process buffer */
- hash_fn_ptr(buffer, read_got, cx);
- }
-
- /* Finalize and write the hash into our buffer. */
-#ifdef CONFIG_SHA1SUM
- if (hash_algo == HASH_SHA1) {
- sha1_end(hashval, &sha1_cx);
- }
-#endif
-#ifdef CONFIG_MD5SUM
- if (hash_algo == HASH_MD5) {
- md5_end(hashval, &md5_cx);
- }
-#endif
-
- free(buffer);
- return result;
-}
--- /dev/null
+/*
+ * md5.c - Compute MD5 checksum of strings according to the
+ * definition of MD5 in RFC 1321 from April 1992.
+ *
+ * Written by Ulrich Drepper <drepper@gnu.ai.mit.edu>, 1995.
+ *
+ * Copyright (C) 1995-1999 Free Software Foundation, Inc.
+ * Copyright (C) 2001 Manuel Novoa III
+ * Copyright (C) 2003 Glenn L. McGrath
+ * Copyright (C) 2003 Erik Andersen
+ *
+ * Licensed under the GPL v2 or later, see the file LICENSE in this tarball.
+ */
+#include <fcntl.h>
+#include <limits.h>
+#include <stdio.h>
+#include <stdint.h>
+#include <stdlib.h>
+#include <string.h>
+#include <unistd.h>
+
+#include "busybox.h"
+
+# if CONFIG_MD5_SIZE_VS_SPEED < 0 || CONFIG_MD5_SIZE_VS_SPEED > 3
+# define MD5_SIZE_VS_SPEED 2
+# else
+# define MD5_SIZE_VS_SPEED CONFIG_MD5_SIZE_VS_SPEED
+# endif
+
+/* Handle endian-ness */
+# if !BB_BIG_ENDIAN
+# define SWAP(n) (n)
+# elif defined(bswap_32)
+# define SWAP(n) bswap_32(n)
+# else
+# define SWAP(n) ((n << 24) | ((n&65280)<<8) | ((n&16711680)>>8) | (n>>24))
+# endif
+
+# if MD5_SIZE_VS_SPEED == 0
+/* This array contains the bytes used to pad the buffer to the next
+ 64-byte boundary. (RFC 1321, 3.1: Step 1) */
+static const unsigned char fillbuf[64] = { 0x80, 0 /* , 0, 0, ... */ };
+# endif /* MD5_SIZE_VS_SPEED == 0 */
+
+/* Initialize structure containing state of computation.
+ * (RFC 1321, 3.3: Step 3)
+ */
+void md5_begin(md5_ctx_t *ctx)
+{
+ ctx->A = 0x67452301;
+ ctx->B = 0xefcdab89;
+ ctx->C = 0x98badcfe;
+ ctx->D = 0x10325476;
+
+ ctx->total[0] = ctx->total[1] = 0;
+ ctx->buflen = 0;
+}
+
+/* These are the four functions used in the four steps of the MD5 algorithm
+ * and defined in the RFC 1321. The first function is a little bit optimized
+ * (as found in Colin Plumbs public domain implementation).
+ * #define FF(b, c, d) ((b & c) | (~b & d))
+ */
+# define FF(b, c, d) (d ^ (b & (c ^ d)))
+# define FG(b, c, d) FF (d, b, c)
+# define FH(b, c, d) (b ^ c ^ d)
+# define FI(b, c, d) (c ^ (b | ~d))
+
+/* Starting with the result of former calls of this function (or the
+ * initialization function update the context for the next LEN bytes
+ * starting at BUFFER.
+ * It is necessary that LEN is a multiple of 64!!!
+ */
+void md5_hash_block(const void *buffer, size_t len, md5_ctx_t *ctx)
+{
+ uint32_t correct_words[16];
+ const uint32_t *words = buffer;
+ size_t nwords = len / sizeof(uint32_t);
+ const uint32_t *endp = words + nwords;
+
+# if MD5_SIZE_VS_SPEED > 0
+ static const uint32_t C_array[] = {
+ /* round 1 */
+ 0xd76aa478, 0xe8c7b756, 0x242070db, 0xc1bdceee,
+ 0xf57c0faf, 0x4787c62a, 0xa8304613, 0xfd469501,
+ 0x698098d8, 0x8b44f7af, 0xffff5bb1, 0x895cd7be,
+ 0x6b901122, 0xfd987193, 0xa679438e, 0x49b40821,
+ /* round 2 */
+ 0xf61e2562, 0xc040b340, 0x265e5a51, 0xe9b6c7aa,
+ 0xd62f105d, 0x2441453, 0xd8a1e681, 0xe7d3fbc8,
+ 0x21e1cde6, 0xc33707d6, 0xf4d50d87, 0x455a14ed,
+ 0xa9e3e905, 0xfcefa3f8, 0x676f02d9, 0x8d2a4c8a,
+ /* round 3 */
+ 0xfffa3942, 0x8771f681, 0x6d9d6122, 0xfde5380c,
+ 0xa4beea44, 0x4bdecfa9, 0xf6bb4b60, 0xbebfbc70,
+ 0x289b7ec6, 0xeaa127fa, 0xd4ef3085, 0x4881d05,
+ 0xd9d4d039, 0xe6db99e5, 0x1fa27cf8, 0xc4ac5665,
+ /* round 4 */
+ 0xf4292244, 0x432aff97, 0xab9423a7, 0xfc93a039,
+ 0x655b59c3, 0x8f0ccc92, 0xffeff47d, 0x85845dd1,
+ 0x6fa87e4f, 0xfe2ce6e0, 0xa3014314, 0x4e0811a1,
+ 0xf7537e82, 0xbd3af235, 0x2ad7d2bb, 0xeb86d391
+ };
+
+ static const char P_array[] = {
+# if MD5_SIZE_VS_SPEED > 1
+ 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, /* 1 */
+# endif /* MD5_SIZE_VS_SPEED > 1 */
+ 1, 6, 11, 0, 5, 10, 15, 4, 9, 14, 3, 8, 13, 2, 7, 12, /* 2 */
+ 5, 8, 11, 14, 1, 4, 7, 10, 13, 0, 3, 6, 9, 12, 15, 2, /* 3 */
+ 0, 7, 14, 5, 12, 3, 10, 1, 8, 15, 6, 13, 4, 11, 2, 9 /* 4 */
+ };
+
+# if MD5_SIZE_VS_SPEED > 1
+ static const char S_array[] = {
+ 7, 12, 17, 22,
+ 5, 9, 14, 20,
+ 4, 11, 16, 23,
+ 6, 10, 15, 21
+ };
+# endif /* MD5_SIZE_VS_SPEED > 1 */
+# endif
+
+ uint32_t A = ctx->A;
+ uint32_t B = ctx->B;
+ uint32_t C = ctx->C;
+ uint32_t D = ctx->D;
+
+ /* First increment the byte count. RFC 1321 specifies the possible
+ length of the file up to 2^64 bits. Here we only compute the
+ number of bytes. Do a double word increment. */
+ ctx->total[0] += len;
+ if (ctx->total[0] < len)
+ ++ctx->total[1];
+
+ /* Process all bytes in the buffer with 64 bytes in each round of
+ the loop. */
+ while (words < endp) {
+ uint32_t *cwp = correct_words;
+ uint32_t A_save = A;
+ uint32_t B_save = B;
+ uint32_t C_save = C;
+ uint32_t D_save = D;
+
+# if MD5_SIZE_VS_SPEED > 1
+# define CYCLIC(w, s) (w = (w << s) | (w >> (32 - s)))
+
+ const uint32_t *pc;
+ const char *pp;
+ const char *ps;
+ int i;
+ uint32_t temp;
+
+ for (i = 0; i < 16; i++) {
+ cwp[i] = SWAP(words[i]);
+ }
+ words += 16;
+
+# if MD5_SIZE_VS_SPEED > 2
+ pc = C_array;
+ pp = P_array;
+ ps = S_array - 4;
+
+ for (i = 0; i < 64; i++) {
+ if ((i & 0x0f) == 0)
+ ps += 4;
+ temp = A;
+ switch (i >> 4) {
+ case 0:
+ temp += FF(B, C, D);
+ break;
+ case 1:
+ temp += FG(B, C, D);
+ break;
+ case 2:
+ temp += FH(B, C, D);
+ break;
+ case 3:
+ temp += FI(B, C, D);
+ }
+ temp += cwp[(int) (*pp++)] + *pc++;
+ CYCLIC(temp, ps[i & 3]);
+ temp += B;
+ A = D;
+ D = C;
+ C = B;
+ B = temp;
+ }
+# else
+ pc = C_array;
+ pp = P_array;
+ ps = S_array;
+
+ for (i = 0; i < 16; i++) {
+ temp = A + FF(B, C, D) + cwp[(int) (*pp++)] + *pc++;
+ CYCLIC(temp, ps[i & 3]);
+ temp += B;
+ A = D;
+ D = C;
+ C = B;
+ B = temp;
+ }
+
+ ps += 4;
+ for (i = 0; i < 16; i++) {
+ temp = A + FG(B, C, D) + cwp[(int) (*pp++)] + *pc++;
+ CYCLIC(temp, ps[i & 3]);
+ temp += B;
+ A = D;
+ D = C;
+ C = B;
+ B = temp;
+ }
+ ps += 4;
+ for (i = 0; i < 16; i++) {
+ temp = A + FH(B, C, D) + cwp[(int) (*pp++)] + *pc++;
+ CYCLIC(temp, ps[i & 3]);
+ temp += B;
+ A = D;
+ D = C;
+ C = B;
+ B = temp;
+ }
+ ps += 4;
+ for (i = 0; i < 16; i++) {
+ temp = A + FI(B, C, D) + cwp[(int) (*pp++)] + *pc++;
+ CYCLIC(temp, ps[i & 3]);
+ temp += B;
+ A = D;
+ D = C;
+ C = B;
+ B = temp;
+ }
+
+# endif /* MD5_SIZE_VS_SPEED > 2 */
+# else
+ /* First round: using the given function, the context and a constant
+ the next context is computed. Because the algorithms processing
+ unit is a 32-bit word and it is determined to work on words in
+ little endian byte order we perhaps have to change the byte order
+ before the computation. To reduce the work for the next steps
+ we store the swapped words in the array CORRECT_WORDS. */
+
+# define OP(a, b, c, d, s, T) \
+ do \
+ { \
+ a += FF (b, c, d) + (*cwp++ = SWAP (*words)) + T; \
+ ++words; \
+ CYCLIC (a, s); \
+ a += b; \
+ } \
+ while (0)
+
+ /* It is unfortunate that C does not provide an operator for
+ cyclic rotation. Hope the C compiler is smart enough. */
+ /* gcc 2.95.4 seems to be --aaronl */
+# define CYCLIC(w, s) (w = (w << s) | (w >> (32 - s)))
+
+ /* Before we start, one word to the strange constants.
+ They are defined in RFC 1321 as
+
+ T[i] = (int) (4294967296.0 * fabs (sin (i))), i=1..64
+ */
+
+# if MD5_SIZE_VS_SPEED == 1
+ const uint32_t *pc;
+ const char *pp;
+ int i;
+# endif /* MD5_SIZE_VS_SPEED */
+
+ /* Round 1. */
+# if MD5_SIZE_VS_SPEED == 1
+ pc = C_array;
+ for (i = 0; i < 4; i++) {
+ OP(A, B, C, D, 7, *pc++);
+ OP(D, A, B, C, 12, *pc++);
+ OP(C, D, A, B, 17, *pc++);
+ OP(B, C, D, A, 22, *pc++);
+ }
+# else
+ OP(A, B, C, D, 7, 0xd76aa478);
+ OP(D, A, B, C, 12, 0xe8c7b756);
+ OP(C, D, A, B, 17, 0x242070db);
+ OP(B, C, D, A, 22, 0xc1bdceee);
+ OP(A, B, C, D, 7, 0xf57c0faf);
+ OP(D, A, B, C, 12, 0x4787c62a);
+ OP(C, D, A, B, 17, 0xa8304613);
+ OP(B, C, D, A, 22, 0xfd469501);
+ OP(A, B, C, D, 7, 0x698098d8);
+ OP(D, A, B, C, 12, 0x8b44f7af);
+ OP(C, D, A, B, 17, 0xffff5bb1);
+ OP(B, C, D, A, 22, 0x895cd7be);
+ OP(A, B, C, D, 7, 0x6b901122);
+ OP(D, A, B, C, 12, 0xfd987193);
+ OP(C, D, A, B, 17, 0xa679438e);
+ OP(B, C, D, A, 22, 0x49b40821);
+# endif /* MD5_SIZE_VS_SPEED == 1 */
+
+ /* For the second to fourth round we have the possibly swapped words
+ in CORRECT_WORDS. Redefine the macro to take an additional first
+ argument specifying the function to use. */
+# undef OP
+# define OP(f, a, b, c, d, k, s, T) \
+ do \
+ { \
+ a += f (b, c, d) + correct_words[k] + T; \
+ CYCLIC (a, s); \
+ a += b; \
+ } \
+ while (0)
+
+ /* Round 2. */
+# if MD5_SIZE_VS_SPEED == 1
+ pp = P_array;
+ for (i = 0; i < 4; i++) {
+ OP(FG, A, B, C, D, (int) (*pp++), 5, *pc++);
+ OP(FG, D, A, B, C, (int) (*pp++), 9, *pc++);
+ OP(FG, C, D, A, B, (int) (*pp++), 14, *pc++);
+ OP(FG, B, C, D, A, (int) (*pp++), 20, *pc++);
+ }
+# else
+ OP(FG, A, B, C, D, 1, 5, 0xf61e2562);
+ OP(FG, D, A, B, C, 6, 9, 0xc040b340);
+ OP(FG, C, D, A, B, 11, 14, 0x265e5a51);
+ OP(FG, B, C, D, A, 0, 20, 0xe9b6c7aa);
+ OP(FG, A, B, C, D, 5, 5, 0xd62f105d);
+ OP(FG, D, A, B, C, 10, 9, 0x02441453);
+ OP(FG, C, D, A, B, 15, 14, 0xd8a1e681);
+ OP(FG, B, C, D, A, 4, 20, 0xe7d3fbc8);
+ OP(FG, A, B, C, D, 9, 5, 0x21e1cde6);
+ OP(FG, D, A, B, C, 14, 9, 0xc33707d6);
+ OP(FG, C, D, A, B, 3, 14, 0xf4d50d87);
+ OP(FG, B, C, D, A, 8, 20, 0x455a14ed);
+ OP(FG, A, B, C, D, 13, 5, 0xa9e3e905);
+ OP(FG, D, A, B, C, 2, 9, 0xfcefa3f8);
+ OP(FG, C, D, A, B, 7, 14, 0x676f02d9);
+ OP(FG, B, C, D, A, 12, 20, 0x8d2a4c8a);
+# endif /* MD5_SIZE_VS_SPEED == 1 */
+
+ /* Round 3. */
+# if MD5_SIZE_VS_SPEED == 1
+ for (i = 0; i < 4; i++) {
+ OP(FH, A, B, C, D, (int) (*pp++), 4, *pc++);
+ OP(FH, D, A, B, C, (int) (*pp++), 11, *pc++);
+ OP(FH, C, D, A, B, (int) (*pp++), 16, *pc++);
+ OP(FH, B, C, D, A, (int) (*pp++), 23, *pc++);
+ }
+# else
+ OP(FH, A, B, C, D, 5, 4, 0xfffa3942);
+ OP(FH, D, A, B, C, 8, 11, 0x8771f681);
+ OP(FH, C, D, A, B, 11, 16, 0x6d9d6122);
+ OP(FH, B, C, D, A, 14, 23, 0xfde5380c);
+ OP(FH, A, B, C, D, 1, 4, 0xa4beea44);
+ OP(FH, D, A, B, C, 4, 11, 0x4bdecfa9);
+ OP(FH, C, D, A, B, 7, 16, 0xf6bb4b60);
+ OP(FH, B, C, D, A, 10, 23, 0xbebfbc70);
+ OP(FH, A, B, C, D, 13, 4, 0x289b7ec6);
+ OP(FH, D, A, B, C, 0, 11, 0xeaa127fa);
+ OP(FH, C, D, A, B, 3, 16, 0xd4ef3085);
+ OP(FH, B, C, D, A, 6, 23, 0x04881d05);
+ OP(FH, A, B, C, D, 9, 4, 0xd9d4d039);
+ OP(FH, D, A, B, C, 12, 11, 0xe6db99e5);
+ OP(FH, C, D, A, B, 15, 16, 0x1fa27cf8);
+ OP(FH, B, C, D, A, 2, 23, 0xc4ac5665);
+# endif /* MD5_SIZE_VS_SPEED == 1 */
+
+ /* Round 4. */
+# if MD5_SIZE_VS_SPEED == 1
+ for (i = 0; i < 4; i++) {
+ OP(FI, A, B, C, D, (int) (*pp++), 6, *pc++);
+ OP(FI, D, A, B, C, (int) (*pp++), 10, *pc++);
+ OP(FI, C, D, A, B, (int) (*pp++), 15, *pc++);
+ OP(FI, B, C, D, A, (int) (*pp++), 21, *pc++);
+ }
+# else
+ OP(FI, A, B, C, D, 0, 6, 0xf4292244);
+ OP(FI, D, A, B, C, 7, 10, 0x432aff97);
+ OP(FI, C, D, A, B, 14, 15, 0xab9423a7);
+ OP(FI, B, C, D, A, 5, 21, 0xfc93a039);
+ OP(FI, A, B, C, D, 12, 6, 0x655b59c3);
+ OP(FI, D, A, B, C, 3, 10, 0x8f0ccc92);
+ OP(FI, C, D, A, B, 10, 15, 0xffeff47d);
+ OP(FI, B, C, D, A, 1, 21, 0x85845dd1);
+ OP(FI, A, B, C, D, 8, 6, 0x6fa87e4f);
+ OP(FI, D, A, B, C, 15, 10, 0xfe2ce6e0);
+ OP(FI, C, D, A, B, 6, 15, 0xa3014314);
+ OP(FI, B, C, D, A, 13, 21, 0x4e0811a1);
+ OP(FI, A, B, C, D, 4, 6, 0xf7537e82);
+ OP(FI, D, A, B, C, 11, 10, 0xbd3af235);
+ OP(FI, C, D, A, B, 2, 15, 0x2ad7d2bb);
+ OP(FI, B, C, D, A, 9, 21, 0xeb86d391);
+# endif /* MD5_SIZE_VS_SPEED == 1 */
+# endif /* MD5_SIZE_VS_SPEED > 1 */
+
+ /* Add the starting values of the context. */
+ A += A_save;
+ B += B_save;
+ C += C_save;
+ D += D_save;
+ }
+
+ /* Put checksum in context given as argument. */
+ ctx->A = A;
+ ctx->B = B;
+ ctx->C = C;
+ ctx->D = D;
+}
+
+/* Starting with the result of former calls of this function (or the
+ * initialization function update the context for the next LEN bytes
+ * starting at BUFFER.
+ * It is NOT required that LEN is a multiple of 64.
+ */
+
+static void md5_hash_bytes(const void *buffer, size_t len, md5_ctx_t *ctx)
+{
+ /* When we already have some bits in our internal buffer concatenate
+ both inputs first. */
+ if (ctx->buflen != 0) {
+ size_t left_over = ctx->buflen;
+ size_t add = 128 - left_over > len ? len : 128 - left_over;
+
+ memcpy(&ctx->buffer[left_over], buffer, add);
+ ctx->buflen += add;
+
+ if (left_over + add > 64) {
+ md5_hash_block(ctx->buffer, (left_over + add) & ~63, ctx);
+ /* The regions in the following copy operation cannot overlap. */
+ memcpy(ctx->buffer, &ctx->buffer[(left_over + add) & ~63],
+ (left_over + add) & 63);
+ ctx->buflen = (left_over + add) & 63;
+ }
+
+ buffer = (const char *) buffer + add;
+ len -= add;
+ }
+
+ /* Process available complete blocks. */
+ if (len > 64) {
+ md5_hash_block(buffer, len & ~63, ctx);
+ buffer = (const char *) buffer + (len & ~63);
+ len &= 63;
+ }
+
+ /* Move remaining bytes in internal buffer. */
+ if (len > 0) {
+ memcpy(ctx->buffer, buffer, len);
+ ctx->buflen = len;
+ }
+}
+
+void md5_hash(const void *data, size_t length, md5_ctx_t *ctx)
+{
+ if (length % 64 == 0) {
+ md5_hash_block(data, length, ctx);
+ } else {
+ md5_hash_bytes(data, length, ctx);
+ }
+}
+
+/* Process the remaining bytes in the buffer and put result from CTX
+ * in first 16 bytes following RESBUF. The result is always in little
+ * endian byte order, so that a byte-wise output yields to the wanted
+ * ASCII representation of the message digest.
+ *
+ * IMPORTANT: On some systems it is required that RESBUF is correctly
+ * aligned for a 32 bits value.
+ */
+void *md5_end(void *resbuf, md5_ctx_t *ctx)
+{
+ /* Take yet unprocessed bytes into account. */
+ uint32_t bytes = ctx->buflen;
+ size_t pad;
+
+ /* Now count remaining bytes. */
+ ctx->total[0] += bytes;
+ if (ctx->total[0] < bytes)
+ ++ctx->total[1];
+
+ pad = bytes >= 56 ? 64 + 56 - bytes : 56 - bytes;
+# if MD5_SIZE_VS_SPEED > 0
+ memset(&ctx->buffer[bytes], 0, pad);
+ ctx->buffer[bytes] = 0x80;
+# else
+ memcpy(&ctx->buffer[bytes], fillbuf, pad);
+# endif /* MD5_SIZE_VS_SPEED > 0 */
+
+ /* Put the 64-bit file length in *bits* at the end of the buffer. */
+ *(uint32_t *) & ctx->buffer[bytes + pad] = SWAP(ctx->total[0] << 3);
+ *(uint32_t *) & ctx->buffer[bytes + pad + 4] =
+ SWAP(((ctx->total[1] << 3) | (ctx->total[0] >> 29)));
+
+ /* Process last bytes. */
+ md5_hash_block(ctx->buffer, bytes + pad + 8, ctx);
+
+ /* Put result from CTX in first 16 bytes following RESBUF. The result is
+ * always in little endian byte order, so that a byte-wise output yields
+ * to the wanted ASCII representation of the message digest.
+ *
+ * IMPORTANT: On some systems it is required that RESBUF is correctly
+ * aligned for a 32 bits value.
+ */
+ ((uint32_t *) resbuf)[0] = SWAP(ctx->A);
+ ((uint32_t *) resbuf)[1] = SWAP(ctx->B);
+ ((uint32_t *) resbuf)[2] = SWAP(ctx->C);
+ ((uint32_t *) resbuf)[3] = SWAP(ctx->D);
+
+ return resbuf;
+}
+
--- /dev/null
+/*
+ * Based on shasum from http://www.netsw.org/crypto/hash/
+ * Majorly hacked up to use Dr Brian Gladman's sha1 code
+ *
+ * Copyright (C) 2002 Dr Brian Gladman <brg@gladman.me.uk>, Worcester, UK.
+ * Copyright (C) 2003 Glenn L. McGrath
+ * Copyright (C) 2003 Erik Andersen
+ *
+ * LICENSE TERMS
+ *
+ * The free distribution and use of this software in both source and binary
+ * form is allowed (with or without changes) provided that:
+ *
+ * 1. distributions of this source code include the above copyright
+ * notice, this list of conditions and the following disclaimer;
+ *
+ * 2. distributions in binary form include the above copyright
+ * notice, this list of conditions and the following disclaimer
+ * in the documentation and/or other associated materials;
+ *
+ * 3. the copyright holder's name is not used to endorse products
+ * built using this software without specific written permission.
+ *
+ * ALTERNATIVELY, provided that this notice is retained in full, this product
+ * may be distributed under the terms of the GNU General Public License (GPL),
+ * in which case the provisions of the GPL apply INSTEAD OF those given above.
+ *
+ * DISCLAIMER
+ *
+ * This software is provided 'as is' with no explicit or implied warranties
+ * in respect of its properties, including, but not limited to, correctness
+ * and/or fitness for purpose.
+ * ---------------------------------------------------------------------------
+ * Issue Date: 10/11/2002
+ *
+ * This is a byte oriented version of SHA1 that operates on arrays of bytes
+ * stored in memory. It runs at 22 cycles per byte on a Pentium P4 processor
+ */
+
+#include <fcntl.h>
+#include <limits.h>
+#include <stdio.h>
+#include <stdint.h>
+#include <stdlib.h>
+#include <string.h>
+#include <unistd.h>
+
+#include "busybox.h"
+
+# define SHA1_BLOCK_SIZE 64
+# define SHA1_DIGEST_SIZE 20
+# define SHA1_HASH_SIZE SHA1_DIGEST_SIZE
+# define SHA2_GOOD 0
+# define SHA2_BAD 1
+
+# define rotl32(x,n) (((x) << n) | ((x) >> (32 - n)))
+
+# define SHA1_MASK (SHA1_BLOCK_SIZE - 1)
+
+/* reverse byte order in 32-bit words */
+#define ch(x,y,z) ((z) ^ ((x) & ((y) ^ (z))))
+#define parity(x,y,z) ((x) ^ (y) ^ (z))
+#define maj(x,y,z) (((x) & (y)) | ((z) & ((x) | (y))))
+
+/* A normal version as set out in the FIPS. This version uses */
+/* partial loop unrolling and is optimised for the Pentium 4 */
+# define rnd(f,k) \
+ t = a; a = rotl32(a,5) + f(b,c,d) + e + k + w[i]; \
+ e = d; d = c; c = rotl32(b, 30); b = t
+
+
+static void sha1_compile(sha1_ctx_t *ctx)
+{
+ uint32_t w[80], i, a, b, c, d, e, t;
+
+ /* note that words are compiled from the buffer into 32-bit */
+ /* words in big-endian order so an order reversal is needed */
+ /* here on little endian machines */
+ for (i = 0; i < SHA1_BLOCK_SIZE / 4; ++i)
+ w[i] = htonl(ctx->wbuf[i]);
+
+ for (i = SHA1_BLOCK_SIZE / 4; i < 80; ++i)
+ w[i] = rotl32(w[i - 3] ^ w[i - 8] ^ w[i - 14] ^ w[i - 16], 1);
+
+ a = ctx->hash[0];
+ b = ctx->hash[1];
+ c = ctx->hash[2];
+ d = ctx->hash[3];
+ e = ctx->hash[4];
+
+ for (i = 0; i < 20; ++i) {
+ rnd(ch, 0x5a827999);
+ }
+
+ for (i = 20; i < 40; ++i) {
+ rnd(parity, 0x6ed9eba1);
+ }
+
+ for (i = 40; i < 60; ++i) {
+ rnd(maj, 0x8f1bbcdc);
+ }
+
+ for (i = 60; i < 80; ++i) {
+ rnd(parity, 0xca62c1d6);
+ }
+
+ ctx->hash[0] += a;
+ ctx->hash[1] += b;
+ ctx->hash[2] += c;
+ ctx->hash[3] += d;
+ ctx->hash[4] += e;
+}
+
+void sha1_begin(sha1_ctx_t *ctx)
+{
+ ctx->count[0] = ctx->count[1] = 0;
+ ctx->hash[0] = 0x67452301;
+ ctx->hash[1] = 0xefcdab89;
+ ctx->hash[2] = 0x98badcfe;
+ ctx->hash[3] = 0x10325476;
+ ctx->hash[4] = 0xc3d2e1f0;
+}
+
+/* SHA1 hash data in an array of bytes into hash buffer and call the */
+/* hash_compile function as required. */
+void sha1_hash(const void *data, size_t length, sha1_ctx_t *ctx)
+{
+ uint32_t pos = (uint32_t) (ctx->count[0] & SHA1_MASK);
+ uint32_t freeb = SHA1_BLOCK_SIZE - pos;
+ const unsigned char *sp = data;
+
+ if ((ctx->count[0] += length) < length)
+ ++(ctx->count[1]);
+
+ while (length >= freeb) { /* tranfer whole blocks while possible */
+ memcpy(((unsigned char *) ctx->wbuf) + pos, sp, freeb);
+ sp += freeb;
+ length -= freeb;
+ freeb = SHA1_BLOCK_SIZE;
+ pos = 0;
+ sha1_compile(ctx);
+ }
+
+ memcpy(((unsigned char *) ctx->wbuf) + pos, sp, length);
+}
+
+void *sha1_end(void *resbuf, sha1_ctx_t *ctx)
+{
+ /* SHA1 Final padding and digest calculation */
+ #if BB_BIG_ENDIAN
+ static uint32_t mask[4] = { 0x00000000, 0xff000000, 0xffff0000, 0xffffff00 };
+ static uint32_t bits[4] = { 0x80000000, 0x00800000, 0x00008000, 0x00000080 };
+ #else
+ static uint32_t mask[4] = { 0x00000000, 0x000000ff, 0x0000ffff, 0x00ffffff };
+ static uint32_t bits[4] = { 0x00000080, 0x00008000, 0x00800000, 0x80000000 };
+ #endif /* __BYTE_ORDER */
+
+ uint8_t *hval = resbuf;
+ uint32_t i, cnt = (uint32_t) (ctx->count[0] & SHA1_MASK);
+
+ /* mask out the rest of any partial 32-bit word and then set */
+ /* the next byte to 0x80. On big-endian machines any bytes in */
+ /* the buffer will be at the top end of 32 bit words, on little */
+ /* endian machines they will be at the bottom. Hence the AND */
+ /* and OR masks above are reversed for little endian systems */
+ ctx->wbuf[cnt >> 2] =
+ (ctx->wbuf[cnt >> 2] & mask[cnt & 3]) | bits[cnt & 3];
+
+ /* we need 9 or more empty positions, one for the padding byte */
+ /* (above) and eight for the length count. If there is not */
+ /* enough space pad and empty the buffer */
+ if (cnt > SHA1_BLOCK_SIZE - 9) {
+ if (cnt < 60)
+ ctx->wbuf[15] = 0;
+ sha1_compile(ctx);
+ cnt = 0;
+ } else /* compute a word index for the empty buffer positions */
+ cnt = (cnt >> 2) + 1;
+
+ while (cnt < 14) /* and zero pad all but last two positions */
+ ctx->wbuf[cnt++] = 0;
+
+ /* assemble the eight byte counter in the buffer in big-endian */
+ /* format */
+
+ ctx->wbuf[14] = htonl((ctx->count[1] << 3) | (ctx->count[0] >> 29));
+ ctx->wbuf[15] = htonl(ctx->count[0] << 3);
+
+ sha1_compile(ctx);
+
+ /* extract the hash value as bytes in case the hash buffer is */
+ /* misaligned for 32-bit words */
+
+ for (i = 0; i < SHA1_DIGEST_SIZE; ++i)
+ hval[i] = (unsigned char) (ctx->hash[i >> 2] >> 8 * (~i & 3));
+
+ return resbuf;
+}
+
+
projects / oweals / busybox.git / commitdiff