2) Dropped some currently unneeded, commented-out, code from pbx-users.lua.
module("luci.controller.pbx", package.seeall)
function index()
- entry({"admin", "services", "pbx"}, cbi("pbx"), "PBX", 80)
- entry({"admin", "services", "pbx", "pbx-google"}, cbi("pbx-google"), "Google Accounts", 1)
- entry({"admin", "services", "pbx", "pbx-voip"}, cbi("pbx-voip"), "SIP Accounts", 2)
- entry({"admin", "services", "pbx", "pbx-users"}, cbi("pbx-users"), "User Accounts", 3)
- entry({"admin", "services", "pbx", "pbx-calls"}, cbi("pbx-calls"), "Call Routing", 4)
- entry({"admin", "services", "pbx", "pbs-advanced"}, cbi("pbx-advanced"), "Advanced Settings", 5)
+ entry({"admin", "services", "pbx"}, cbi("pbx"), "PBX", 80)
+ entry({"admin", "services", "pbx", "pbx-google"}, cbi("pbx-google"), "Google Accounts", 1)
+ entry({"admin", "services", "pbx", "pbx-voip"}, cbi("pbx-voip"), "SIP Accounts", 2)
+ entry({"admin", "services", "pbx", "pbx-users"}, cbi("pbx-users"), "User Accounts", 3)
+ entry({"admin", "services", "pbx", "pbx-calls"}, cbi("pbx-calls"), "Call Routing", 4)
+ entry({"admin", "services", "pbx", "pbs-advanced"}, cbi("pbx-advanced"), "Advanced Settings", 5)
end
-- Returns all the network related settings, including a constructed RTP range
function get_network_info()
- externhost = m.uci:get(modulename, "advanced", "externhost")
- ipaddr = m.uci:get("network", "lan", "ipaddr")
- bindport = m.uci:get(modulename, "advanced", "bindport")
- rtpstart = m.uci:get(modulename, "advanced", "rtpstart")
- rtpend = m.uci:get(modulename, "advanced", "rtpend")
-
- if bindport == nil then bindport = defaultbindport end
- if rtpstart == nil then rtpstart = defaultrtpstart end
- if rtpend == nil then rtpend = defaultrtpend end
-
- if rtpstart == nil or rtpend == nil then
- rtprange = nil
- else
- rtprange = rtpstart .. "-" .. rtpend
- end
-
- return bindport, rtprange, ipaddr, externhost
+ externhost = m.uci:get(modulename, "advanced", "externhost")
+ ipaddr = m.uci:get("network", "lan", "ipaddr")
+ bindport = m.uci:get(modulename, "advanced", "bindport")
+ rtpstart = m.uci:get(modulename, "advanced", "rtpstart")
+ rtpend = m.uci:get(modulename, "advanced", "rtpend")
+
+ if bindport == nil then bindport = defaultbindport end
+ if rtpstart == nil then rtpstart = defaultrtpstart end
+ if rtpend == nil then rtpend = defaultrtpend end
+
+ if rtpstart == nil or rtpend == nil then
+ rtprange = nil
+ else
+ rtprange = rtpstart .. "-" .. rtpend
+ end
+
+ return bindport, rtprange, ipaddr, externhost
end
-- If not present, insert empty rules in the given config & section named PBX-SIP and PBX-RTP
function insert_empty_sip_rtp_rules(config, section)
- -- Add rules named PBX-SIP and PBX-RTP if not existing
- found_sip_rule = false
- found_rtp_rule = false
- m.uci:foreach(config, section,
- function(s1)
- if s1._name == 'PBX-SIP' then
- found_sip_rule = true
- elseif s1._name == 'PBX-RTP' then
- found_rtp_rule = true
- end
- end)
-
- if found_sip_rule ~= true then
- newrule=m.uci:add(config, section)
- m.uci:set(config, newrule, '_name', 'PBX-SIP')
- end
- if found_rtp_rule ~= true then
- newrule=m.uci:add(config, section)
- m.uci:set(config, newrule, '_name', 'PBX-RTP')
- end
+ -- Add rules named PBX-SIP and PBX-RTP if not existing
+ found_sip_rule = false
+ found_rtp_rule = false
+ m.uci:foreach(config, section,
+ function(s1)
+ if s1._name == 'PBX-SIP' then
+ found_sip_rule = true
+ elseif s1._name == 'PBX-RTP' then
+ found_rtp_rule = true
+ end
+ end)
+
+ if found_sip_rule ~= true then
+ newrule=m.uci:add(config, section)
+ m.uci:set(config, newrule, '_name', 'PBX-SIP')
+ end
+ if found_rtp_rule ~= true then
+ newrule=m.uci:add(config, section)
+ m.uci:set(config, newrule, '_name', 'PBX-RTP')
+ end
end
-- Delete rules in the given config & section named PBX-SIP and PBX-RTP
function delete_sip_rtp_rules(config, section)
- -- Remove rules named PBX-SIP and PBX-RTP
- commit = false
- m.uci:foreach(config, section,
- function(s1)
- if s1._name == 'PBX-SIP' or s1._name == 'PBX-RTP' then
- m.uci:delete(config, s1['.name'])
- commit = true
- end
- end)
-
- -- If something changed, then we commit the config.
- if commit == true then m.uci:commit(config) end
+ -- Remove rules named PBX-SIP and PBX-RTP
+ commit = false
+ m.uci:foreach(config, section,
+ function(s1)
+ if s1._name == 'PBX-SIP' or s1._name == 'PBX-RTP' then
+ m.uci:delete(config, s1['.name'])
+ commit = true
+ end
+ end)
+
+ -- If something changed, then we commit the config.
+ if commit == true then m.uci:commit(config) end
end
-- Deletes QoS rules associated with this PBX.
function delete_qos_rules()
- delete_sip_rtp_rules ("qos", "classify")
+ delete_sip_rtp_rules ("qos", "classify")
end
function insert_qos_rules()
- -- Insert empty PBX-SIP and PBX-RTP rules if not present.
- insert_empty_sip_rtp_rules ("qos", "classify")
-
- -- Get the network information
- bindport, rtprange, ipaddr, externhost = get_network_info()
-
- -- Iterate through the QoS rules, and if there is no other rule with the same port
- -- range at the express service level, insert this rule.
- commit = false
- m.uci:foreach("qos", "classify",
- function(s1)
- if s1._name == 'PBX-SIP' then
- if s1.ports ~= bindport or s1.target ~= "Express" or s1.proto ~= "udp" then
- m.uci:set("qos", s1['.name'], "ports", bindport)
- m.uci:set("qos", s1['.name'], "proto", "udp")
- m.uci:set("qos", s1['.name'], "target", "Express")
- commit = true
- end
- elseif s1._name == 'PBX-RTP' then
- if s1.ports ~= rtprange or s1.target ~= "Express" or s1.proto ~= "udp" then
- m.uci:set("qos", s1['.name'], "ports", rtprange)
- m.uci:set("qos", s1['.name'], "proto", "udp")
- m.uci:set("qos", s1['.name'], "target", "Express")
- commit = true
- end
- end
- end)
-
- -- If something changed, then we commit the qos config.
- if commit == true then m.uci:commit("qos") end
+ -- Insert empty PBX-SIP and PBX-RTP rules if not present.
+ insert_empty_sip_rtp_rules ("qos", "classify")
+
+ -- Get the network information
+ bindport, rtprange, ipaddr, externhost = get_network_info()
+
+ -- Iterate through the QoS rules, and if there is no other rule with the same port
+ -- range at the express service level, insert this rule.
+ commit = false
+ m.uci:foreach("qos", "classify",
+ function(s1)
+ if s1._name == 'PBX-SIP' then
+ if s1.ports ~= bindport or s1.target ~= "Express" or s1.proto ~= "udp" then
+ m.uci:set("qos", s1['.name'], "ports", bindport)
+ m.uci:set("qos", s1['.name'], "proto", "udp")
+ m.uci:set("qos", s1['.name'], "target", "Express")
+ commit = true
+ end
+ elseif s1._name == 'PBX-RTP' then
+ if s1.ports ~= rtprange or s1.target ~= "Express" or s1.proto ~= "udp" then
+ m.uci:set("qos", s1['.name'], "ports", rtprange)
+ m.uci:set("qos", s1['.name'], "proto", "udp")
+ m.uci:set("qos", s1['.name'], "target", "Express")
+ commit = true
+ end
+ end
+ end)
+
+ -- If something changed, then we commit the qos config.
+ if commit == true then m.uci:commit("qos") end
end
-- This function is a (so far) unsuccessful attempt to manipulate the firewall rules from here
-- Need to do more testing and eventually move to this mode.
function maintain_firewall_rules()
- -- Get the network information
- bindport, rtprange, ipaddr, externhost = get_network_info()
-
- commit = false
- -- Only if externhost is set, do we control firewall rules.
- if externhost ~= nil and bindport ~= nil and rtprange ~= nil then
- -- Insert empty PBX-SIP and PBX-RTP rules if not present.
- insert_empty_sip_rtp_rules ("firewall", "rule")
-
- -- Iterate through the firewall rules, and if the dest_port and dest_ip setting of the\
- -- SIP and RTP rule do not match what we want configured, set all the entries in the rule\
- -- appropriately.
- m.uci:foreach("firewall", "rule",
- function(s1)
- if s1._name == 'PBX-SIP' then
- if s1.dest_port ~= bindport then
- m.uci:set("firewall", s1['.name'], "dest_port", bindport)
- m.uci:set("firewall", s1['.name'], "src", "wan")
- m.uci:set("firewall", s1['.name'], "proto", "udp")
- m.uci:set("firewall", s1['.name'], "target", "ACCEPT")
- commit = true
- end
- elseif s1._name == 'PBX-RTP' then
- if s1.dest_port ~= rtprange then
- m.uci:set("firewall", s1['.name'], "dest_port", rtprange)
- m.uci:set("firewall", s1['.name'], "src", "wan")
- m.uci:set("firewall", s1['.name'], "proto", "udp")
- m.uci:set("firewall", s1['.name'], "target", "ACCEPT")
- commit = true
- end
- end
- end)
- else
- -- We delete the firewall rules if one or more of the necessary parameters are not set.
- sip_rule_name=nil
- rtp_rule_name=nil
-
- -- First discover the configuration names of the rules.
- m.uci:foreach("firewall", "rule",
- function(s1)
- if s1._name == 'PBX-SIP' then
- sip_rule_name = s1['.name']
- elseif s1._name == 'PBX-RTP' then
- rtp_rule_name = s1['.name']
- end
- end)
-
- -- Then, using the names, actually delete the rules.
- if sip_rule_name ~= nil then
- m.uci:delete("firewall", sip_rule_name)
- commit = true
- end
- if rtp_rule_name ~= nil then
- m.uci:delete("firewall", rtp_rule_name)
- commit = true
- end
- end
-
- -- If something changed, then we commit the firewall config.
- if commit == true then m.uci:commit("firewall") end
+ -- Get the network information
+ bindport, rtprange, ipaddr, externhost = get_network_info()
+
+ commit = false
+ -- Only if externhost is set, do we control firewall rules.
+ if externhost ~= nil and bindport ~= nil and rtprange ~= nil then
+ -- Insert empty PBX-SIP and PBX-RTP rules if not present.
+ insert_empty_sip_rtp_rules ("firewall", "rule")
+
+ -- Iterate through the firewall rules, and if the dest_port and dest_ip setting of the\
+ -- SIP and RTP rule do not match what we want configured, set all the entries in the rule\
+ -- appropriately.
+ m.uci:foreach("firewall", "rule",
+ function(s1)
+ if s1._name == 'PBX-SIP' then
+ if s1.dest_port ~= bindport then
+ m.uci:set("firewall", s1['.name'], "dest_port", bindport)
+ m.uci:set("firewall", s1['.name'], "src", "wan")
+ m.uci:set("firewall", s1['.name'], "proto", "udp")
+ m.uci:set("firewall", s1['.name'], "target", "ACCEPT")
+ commit = true
+ end
+ elseif s1._name == 'PBX-RTP' then
+ if s1.dest_port ~= rtprange then
+ m.uci:set("firewall", s1['.name'], "dest_port", rtprange)
+ m.uci:set("firewall", s1['.name'], "src", "wan")
+ m.uci:set("firewall", s1['.name'], "proto", "udp")
+ m.uci:set("firewall", s1['.name'], "target", "ACCEPT")
+ commit = true
+ end
+ end
+ end)
+ else
+ -- We delete the firewall rules if one or more of the necessary parameters are not set.
+ sip_rule_name=nil
+ rtp_rule_name=nil
+
+ -- First discover the configuration names of the rules.
+ m.uci:foreach("firewall", "rule",
+ function(s1)
+ if s1._name == 'PBX-SIP' then
+ sip_rule_name = s1['.name']
+ elseif s1._name == 'PBX-RTP' then
+ rtp_rule_name = s1['.name']
+ end
+ end)
+
+ -- Then, using the names, actually delete the rules.
+ if sip_rule_name ~= nil then
+ m.uci:delete("firewall", sip_rule_name)
+ commit = true
+ end
+ if rtp_rule_name ~= nil then
+ m.uci:delete("firewall", rtp_rule_name)
+ commit = true
+ end
+ end
+
+ -- If something changed, then we commit the firewall config.
+ if commit == true then m.uci:commit("firewall") end
end
m = Map (modulename, translate("Advanced Settings"),
- translate("This section contains settings which do not need to be changed under\
- normal circumstances. In addition, here you can configure your system\
- for use with remote SIP devices, and resolve call quality issues by enabling\
- the insertion of QoS rules."))
+ translate("This section contains settings which do not need to be changed under\
+ normal circumstances. In addition, here you can configure your system\
+ for use with remote SIP devices, and resolve call quality issues by enabling\
+ the insertion of QoS rules."))
-- Recreate the voip server config, and restart necessary services after changes are commited
-- to the advanced configuration. The firewall must restart because of "Remote Usage".
function m.on_after_commit(self)
- -- Make sure firewall rules are in place
- maintain_firewall_rules()
+ -- Make sure firewall rules are in place
+ maintain_firewall_rules()
- -- If insertion of QoS rules is enabled
- if m.uci:get(modulename, "advanced", "qos_enabled") == "yes" then
- insert_qos_rules()
- else
- delete_qos_rules()
- end
+ -- If insertion of QoS rules is enabled
+ if m.uci:get(modulename, "advanced", "qos_enabled") == "yes" then
+ insert_qos_rules()
+ else
+ delete_qos_rules()
+ end
- luci.sys.call("/etc/init.d/pbx-" .. server .. " restart 1\>/dev/null 2\>/dev/null")
- luci.sys.call("/etc/init.d/" .. server .. " restart 1\>/dev/null 2\>/dev/null")
- luci.sys.call("/etc/init.d/firewall restart 1\>/dev/null 2\>/dev/null")
+ luci.sys.call("/etc/init.d/pbx-" .. server .. " restart 1\>/dev/null 2\>/dev/null")
+ luci.sys.call("/etc/init.d/" .. server .. " restart 1\>/dev/null 2\>/dev/null")
+ luci.sys.call("/etc/init.d/firewall restart 1\>/dev/null 2\>/dev/null")
end
-----------------------------------------------------------------------------
s:tab("general", translate("General Settings"))
s:tab("remote_usage", translate("Remote Usage"),
translatef("You can use your SIP devices/softphones with this system from a remote location\
- as well, as long as your Internet Service Provider gives you a public IP.\
- You will be able to call other local users for free (e.g. other Analog Telephone Adapters (ATAs))\
- and use your VoIP providers to make calls as if you were at local to the PBX.\
- After configuring this tab, go back to where users are configured and see the new\
- Server and Port setting you need to configure the SIP devices with. Please note that by default\
- %s uses UDP port range %d to %d for RTP traffic (which carries voice), in case you need to configure\
- NAT or QoS on another device.", appname, defaultrtpstart, defaultrtpend))
+ as well, as long as your Internet Service Provider gives you a public IP.\
+ You will be able to call other local users for free (e.g. other Analog Telephone Adapters (ATAs))\
+ and use your VoIP providers to make calls as if you were at local to the PBX.\
+ After configuring this tab, go back to where users are configured and see the new\
+ Server and Port setting you need to configure the SIP devices with. Please note that by default\
+ %s uses UDP port range %d to %d for RTP traffic (which carries voice), in case you need to configure\
+ NAT or QoS on another device.", appname, defaultrtpstart, defaultrtpend))
s:tab("qos", translate("QoS Settings"),
- translate("If you experience jittery or high latency audio during heavy downloads, you may want to enable QoS.\
- QoS prioritizes traffic to and from your network for specified ports and IP addresses, resulting in\
- better latency and throughput for sound in our case. If enabled below, a QoS rule for this service will\
- be configured by the PBX automatically, but you must visit the QoS configuration page (Network->QoS) to\
- configure other critical QoS settings like Download and Upload speed."))
+ translate("If you experience jittery or high latency audio during heavy downloads, you may want \
+ to enable QoS. QoS prioritizes traffic to and from your network for specified ports and IP \
+ addresses, resulting in better latency and throughput for sound in our case. If enabled below, \
+ a QoS rule for this service will be configured by the PBX automatically, but you must visit the \
+ QoS configuration page (Network->QoS) to configure other critical QoS settings like Download \
+ and Upload speed."))
ua = s:taboption("general", Value, "useragent", translate("User Agent String"),
- translate("This is the name that the VoIP server will use to identify itself when\
- registering to VoIP (SIP) providers. Some providers require this to a specific\
- string matching a hardware SIP device."))
+ translate("This is the name that the VoIP server will use to identify itself when\
+ registering to VoIP (SIP) providers. Some providers require this to a specific\
+ string matching a hardware SIP device."))
ua.default = appname
h = s:taboption("remote_usage", Value, "externhost", translate("Domain Name/Dynamic Domain Name"),
- translate("You should either have registered a domain name and have a static IP\
- address, or have configured Dynamic DNS on this router. Enter a\
- domain name which resolves to your external IP address."))
+ translate("You should either have registered a domain name and have a static IP\
+ address, or have configured Dynamic DNS on this router. Enter a\
+ domain name which resolves to your external IP address."))
h.datatype = "hostname"
p = s:taboption("remote_usage", Value, "bindport", translate("External SIP Port"),
- translate("Pick a random port number between 6500 and 9500 for the service to listen on.\
- Do not pick the standard 5060, because it is often subject to brute-force attacks.\
- When finished, (1) click \"Save and Apply\", and (2) click the \"Restart VoIP Service\"\
- button above. Finally, (3) look in the \"SIP Device/Softphone Accounts\" section for\
- updated Server and Port settings for your SIP Devices/Softphones."))
+ translate("Pick a random port number between 6500 and 9500 for the service to listen on.\
+ Do not pick the standard 5060, because it is often subject to brute-force attacks.\
+ When finished, (1) click \"Save and Apply\", and (2) click the \"Restart VoIP Service\"\
+ button above. Finally, (3) look in the \"SIP Device/Softphone Accounts\" section for\
+ updated Server and Port settings for your SIP Devices/Softphones."))
p.datatype = "port"
p = s:taboption("remote_usage", Value, "rtpstart", translate("RTP Port Range Start"),
- translate("RTP traffic carries actual voice packets. This is the start of the port range\
- which will be used for setting up RTP communication. It's usually OK to leave this\
- at the default value."))
+ translate("RTP traffic carries actual voice packets. This is the start of the port range\
+ which will be used for setting up RTP communication. It's usually OK to leave this\
+ at the default value."))
p.datatype = "port"
p.default = defaultrtpstart
m = Map (modulename, translate("Call Routing"),
- translate("This is where you indicate which Google/SIP accounts are used to call what \
- country/area codes, which users can use which SIP/Google accounts, how incoming\
- calls are routed, what numbers can get into this PBX with a password, and what\
- numbers are blacklisted."))
+ translate("This is where you indicate which Google/SIP accounts are used to call what \
+ country/area codes, which users can use which SIP/Google accounts, how incoming\
+ calls are routed, what numbers can get into this PBX with a password, and what\
+ numbers are blacklisted."))
-- Recreate the config, and restart services after changes are commited to the configuration.
function m.on_after_commit(self)
- luci.sys.call("/etc/init.d/pbx-" .. server .. " restart 1\>/dev/null 2\>/dev/null")
- luci.sys.call("/etc/init.d/" .. server .. " restart 1\>/dev/null 2\>/dev/null")
+ luci.sys.call("/etc/init.d/pbx-" .. server .. " restart 1\>/dev/null 2\>/dev/null")
+ luci.sys.call("/etc/init.d/" .. server .. " restart 1\>/dev/null 2\>/dev/null")
end
----------------------------------------------------------------------------------------------------
s = m:section(NamedSection, "outgoing_calls", "call_routing", translate("Outgoing Calls"),
- translate("If you have more than one account which can make outgoing calls, you\
- should enter a list of phone numbers and prefixes in the following fields for each\
- provider listed. Invalid prefixes are removed silently, and only 0-9, X, Z, N, #, *,\
- and + are valid characters. The letter X matches 0-9, Z matches 1-9, and N matches 2-9.\
- For example to make calls to Germany through a provider, you can enter 49. To make calls\
- to North America, you can enter 1NXXNXXXXXX. If one of your providers can make \"local\"\
- calls to an area code like New York's 646, you can enter 646NXXXXXX for that\
- provider. You should leave one account with an empty list to make calls with\
- it by default, if no other provider's prefixes match. The system will automatically\
- replace an empty list with a message that the provider dials all numbers. Be as specific as\
- possible (i.e. 1NXXNXXXXXX is better than 1). Please note all international dial codes\
- are discarded (e.g. 00, 011, 010, 0011). Entries can be made in a\
- space-separated list, and/or one per line by hitting enter after every one."))
+ translate("If you have more than one account which can make outgoing calls, you\
+ should enter a list of phone numbers and prefixes in the following fields for each\
+ provider listed. Invalid prefixes are removed silently, and only 0-9, X, Z, N, #, *,\
+ and + are valid characters. The letter X matches 0-9, Z matches 1-9, and N matches 2-9.\
+ For example to make calls to Germany through a provider, you can enter 49. To make calls\
+ to North America, you can enter 1NXXNXXXXXX. If one of your providers can make \"local\"\
+ calls to an area code like New York's 646, you can enter 646NXXXXXX for that\
+ provider. You should leave one account with an empty list to make calls with\
+ it by default, if no other provider's prefixes match. The system will automatically\
+ replace an empty list with a message that the provider dials all numbers. Be as specific as\
+ possible (i.e. 1NXXNXXXXXX is better than 1). Please note all international dial codes\
+ are discarded (e.g. 00, 011, 010, 0011). Entries can be made in a space-separated\
+ list, and/or one per line by hitting enter after every one."))
s.anonymous = true
m.uci:foreach(googlemodulename, "gtalk_jabber",
- function(s1)
- if s1.username ~= nil and s1.name ~= nil and
- s1.make_outgoing_calls == "yes" then
- patt = s:option(DynamicList, s1.name, s1.username)
-
- -- Add provider to the associative array of valid accounts.
- validoutaccounts[s1.name] = s1.username
-
- -- If the saved field is empty, we return a string
- -- telling the user that this account would dial any exten.
- function patt.cfgvalue(self, section)
- value = self.map:get(section, self.option)
-
- if value == nil then
- return {"Dials any number"}
- else
- return value
- end
- end
-
- -- Write only valid extensions into the config file.
- function patt.write(self, section, value)
- newvalue = {}
- nindex = 1
- for index, field in ipairs(value) do
- val = luci.util.trim(value[index])
- if is_valid_extension(val) == true then
- newvalue[nindex] = val
- nindex = nindex + 1
- end
- end
- DynamicList.write(self, section, newvalue)
- end
- end
- end)
+ function(s1)
+ if s1.username ~= nil and s1.name ~= nil and
+ s1.make_outgoing_calls == "yes" then
+ patt = s:option(DynamicList, s1.name, s1.username)
+
+ -- Add provider to the associative array of valid accounts.
+ validoutaccounts[s1.name] = s1.username
+
+ -- If the saved field is empty, we return a string
+ -- telling the user that this account would dial any exten.
+ function patt.cfgvalue(self, section)
+ value = self.map:get(section, self.option)
+
+ if value == nil then
+ return {"Dials any number"}
+ else
+ return value
+ end
+ end
+
+ -- Write only valid extensions into the config file.
+ function patt.write(self, section, value)
+ newvalue = {}
+ nindex = 1
+ for index, field in ipairs(value) do
+ val = luci.util.trim(value[index])
+ if is_valid_extension(val) == true then
+ newvalue[nindex] = val
+ nindex = nindex + 1
+ end
+ end
+ DynamicList.write(self, section, newvalue)
+ end
+ end
+ end)
m.uci:foreach(voipmodulename, "voip_provider",
- function(s1)
- if s1.defaultuser ~= nil and s1.host ~= nil and
- s1.name ~= nil and s1.make_outgoing_calls == "yes" then
- patt = s:option(DynamicList, s1.name, s1.defaultuser .. "@" .. s1.host)
-
- -- Add provider to the associative array of valid accounts.
- validoutaccounts[s1.name] = s1.defaultuser .. "@" .. s1.host
-
- -- If the saved field is empty, we return a string
- -- telling the user that this account would dial any exten.
- function patt.cfgvalue(self, section)
- value = self.map:get(section, self.option)
-
- if value == nil then
- return {"Dials any number"}
- else
- return value
- end
- end
-
- -- Write only valid extensions into the config file.
- function patt.write(self, section, value)
- newvalue = {}
- nindex = 1
- for index, field in ipairs(value) do
- val = luci.util.trim(value[index])
- if is_valid_extension(val) == true then
- newvalue[nindex] = val
- nindex = nindex + 1
- end
- end
- DynamicList.write(self, section, newvalue)
- end
- end
- end)
+ function(s1)
+ if s1.defaultuser ~= nil and s1.host ~= nil and
+ s1.name ~= nil and s1.make_outgoing_calls == "yes" then
+ patt = s:option(DynamicList, s1.name, s1.defaultuser .. "@" .. s1.host)
+
+ -- Add provider to the associative array of valid accounts.
+ validoutaccounts[s1.name] = s1.defaultuser .. "@" .. s1.host
+
+ -- If the saved field is empty, we return a string
+ -- telling the user that this account would dial any exten.
+ function patt.cfgvalue(self, section)
+ value = self.map:get(section, self.option)
+
+ if value == nil then
+ return {"Dials any number"}
+ else
+ return value
+ end
+ end
+
+ -- Write only valid extensions into the config file.
+ function patt.write(self, section, value)
+ newvalue = {}
+ nindex = 1
+ for index, field in ipairs(value) do
+ val = luci.util.trim(value[index])
+ if is_valid_extension(val) == true then
+ newvalue[nindex] = val
+ nindex = nindex + 1
+ end
+ end
+ DynamicList.write(self, section, newvalue)
+ end
+ end
+ end)
----------------------------------------------------------------------------------------------------
s = m:section(NamedSection, "incoming_calls", "call_routing", translate("Incoming Calls"),
- translate("For each provider that receives calls, here you can restrict which users to ring\
- on incoming calls. If the list is empty, the system will indicate that all users\
- which are enabled for incoming calls will ring. Invalid usernames will be rejected\
- silently. Also, entering a username here overrides the user's setting to not receive\
- incoming calls, so this way, you can make users ring only for select providers.\
- Entries can be made in a space-separated list, and/or one per\
- line by hitting enter after every one."))
+ translate("For each provider that receives calls, here you can restrict which users to ring\
+ on incoming calls. If the list is empty, the system will indicate that all users\
+ which are enabled for incoming calls will ring. Invalid usernames will be rejected\
+ silently. Also, entering a username here overrides the user's setting to not receive\
+ incoming calls, so this way, you can make users ring only for select providers.\
+ Entries can be made in a space-separated list, and/or one per\
+ line by hitting enter after every one."))
s.anonymous = true
m.uci:foreach(googlemodulename, "gtalk_jabber",
- function(s1)
- if s1.username ~= nil and s1.register == "yes" then
- field_name=string.gsub(s1.username, "%W", "_")
- gtalkaccts = s:option(DynamicList, field_name, s1.username)
-
- -- If the saved field is empty, we return a string
- -- telling the user that this account would dial any exten.
- function gtalkaccts.cfgvalue(self, section)
- value = self.map:get(section, self.option)
-
- if value == nil then
- return {"Rings all users"}
- else
- return value
- end
- end
-
- -- Write only valid user names.
- function gtalkaccts.write(self, section, value)
- newvalue = {}
- nindex = 1
- for index, field in ipairs(value) do
- trimuser = luci.util.trim(value[index])
- if allvalidusers[trimuser] == true then
- newvalue[nindex] = trimuser
- nindex = nindex + 1
- end
- end
- DynamicList.write(self, section, newvalue)
- end
- end
- end)
+ function(s1)
+ if s1.username ~= nil and s1.register == "yes" then
+ field_name=string.gsub(s1.username, "%W", "_")
+ gtalkaccts = s:option(DynamicList, field_name, s1.username)
+
+ -- If the saved field is empty, we return a string
+ -- telling the user that this account would dial any exten.
+ function gtalkaccts.cfgvalue(self, section)
+ value = self.map:get(section, self.option)
+
+ if value == nil then
+ return {"Rings all users"}
+ else
+ return value
+ end
+ end
+
+ -- Write only valid user names.
+ function gtalkaccts.write(self, section, value)
+ newvalue = {}
+ nindex = 1
+ for index, field in ipairs(value) do
+ trimuser = luci.util.trim(value[index])
+ if allvalidusers[trimuser] == true then
+ newvalue[nindex] = trimuser
+ nindex = nindex + 1
+ end
+ end
+ DynamicList.write(self, section, newvalue)
+ end
+ end
+ end)
m.uci:foreach(voipmodulename, "voip_provider",
- function(s1)
- if s1.defaultuser ~= nil and s1.host ~= nil and s1.register == "yes" then
- field_name=string.gsub(s1.defaultuser .. "_" .. s1.host, "%W", "_")
- voipaccts = s:option(DynamicList, field_name, s1.defaultuser .. "@" .. s1.host)
-
- -- If the saved field is empty, we return a string
- -- telling the user that this account would dial any exten.
- function voipaccts.cfgvalue(self, section)
- value = self.map:get(section, self.option)
-
- if value == nil then
- return {"Rings all users"}
- else
- return value
- end
- end
-
- -- Write only valid user names.
- function voipaccts.write(self, section, value)
- newvalue = {}
- nindex = 1
- for index, field in ipairs(value) do
- trimuser = luci.util.trim(value[index])
- if allvalidusers[trimuser] == true then
- newvalue[nindex] = trimuser
- nindex = nindex + 1
- end
- end
- DynamicList.write(self, section, newvalue)
- end
- end
- end)
+ function(s1)
+ if s1.defaultuser ~= nil and s1.host ~= nil and s1.register == "yes" then
+ field_name=string.gsub(s1.defaultuser .. "_" .. s1.host, "%W", "_")
+ voipaccts = s:option(DynamicList, field_name, s1.defaultuser .. "@" .. s1.host)
+
+ -- If the saved field is empty, we return a string
+ -- telling the user that this account would dial any exten.
+ function voipaccts.cfgvalue(self, section)
+ value = self.map:get(section, self.option)
+
+ if value == nil then
+ return {"Rings all users"}
+ else
+ return value
+ end
+ end
+
+ -- Write only valid user names.
+ function voipaccts.write(self, section, value)
+ newvalue = {}
+ nindex = 1
+ for index, field in ipairs(value) do
+ trimuser = luci.util.trim(value[index])
+ if allvalidusers[trimuser] == true then
+ newvalue[nindex] = trimuser
+ nindex = nindex + 1
+ end
+ end
+ DynamicList.write(self, section, newvalue)
+ end
+ end
+ end)
----------------------------------------------------------------------------------------------------
s = m:section(NamedSection, "providers_user_can_use", "call_routing",
translate("Providers Used for Outgoing Calls"),
translate("If you would like, you could restrict which providers users are allowed to use for outgoing\
- calls. By default all users can use all providers. To show up in the list below the user should\
- be allowed to make outgoing calls in the \"User Accounts\" page. Enter VoIP providers in the format\
- username@some.host.name, as listed in \"Outgoing Calls\" above. It's easiest to copy and paste\
- the providers from above. Invalid entries will be rejected silently. Entries can be made in a \
- space-separated list, and/or one per line by hitting enter after every one."))
+ calls. By default all users can use all providers. To show up in the list below the user should\
+ be allowed to make outgoing calls in the \"User Accounts\" page. Enter VoIP providers in the format\
+ username@some.host.name, as listed in \"Outgoing Calls\" above. It's easiest to copy and paste\
+ the providers from above. Invalid entries will be rejected silently. Entries can be made in a \
+ space-separated list, and/or one per line by hitting enter after every one."))
s.anonymous = true
m.uci:foreach(usersmodulename, "local_user",
- function(s1)
- -- Add user to list of all valid users.
- if s1.defaultuser ~= nil then allvalidusers[s1.defaultuser] = true end
-
- if s1.defaultuser ~= nil and s1.can_call == "yes" then
- providers = s:option(DynamicList, s1.defaultuser, s1.defaultuser)
-
- -- If the saved field is empty, we return a string
- -- telling the user that this account would dial any exten.
- function providers.cfgvalue(self, section)
- value = self.map:get(section, self.option)
-
- if value == nil then
- return {"Uses all provider accounts"}
- else
- newvalue = {}
- -- Convert internal names to user@host values.
- for i,v in ipairs(value) do
- newvalue[i] = validoutaccounts[v]
- end
- return newvalue
- end
- end
-
- -- Cook the new values prior to entering them into the config file.
- -- Also, enter them only if they are valid.
- function providers.write(self, section, value)
- cookedvalue = {}
- cindex = 1
- for index, field in ipairs(value) do
- cooked = string.gsub(luci.util.trim(value[index]), "%W", "_")
- if validoutaccounts[cooked] ~= nil then
- cookedvalue[cindex] = cooked
- cindex = cindex + 1
- end
- end
- DynamicList.write(self, section, cookedvalue)
- end
- end
- end)
+ function(s1)
+ -- Add user to list of all valid users.
+ if s1.defaultuser ~= nil then allvalidusers[s1.defaultuser] = true end
+
+ if s1.defaultuser ~= nil and s1.can_call == "yes" then
+ providers = s:option(DynamicList, s1.defaultuser, s1.defaultuser)
+
+ -- If the saved field is empty, we return a string
+ -- telling the user that this account would dial any exten.
+ function providers.cfgvalue(self, section)
+ value = self.map:get(section, self.option)
+
+ if value == nil then
+ return {"Uses all provider accounts"}
+ else
+ newvalue = {}
+ -- Convert internal names to user@host values.
+ for i,v in ipairs(value) do
+ newvalue[i] = validoutaccounts[v]
+ end
+ return newvalue
+ end
+ end
+
+ -- Cook the new values prior to entering them into the config file.
+ -- Also, enter them only if they are valid.
+ function providers.write(self, section, value)
+ cookedvalue = {}
+ cindex = 1
+ for index, field in ipairs(value) do
+ cooked = string.gsub(luci.util.trim(value[index]), "%W", "_")
+ if validoutaccounts[cooked] ~= nil then
+ cookedvalue[cindex] = cooked
+ cindex = cindex + 1
+ end
+ end
+ DynamicList.write(self, section, cookedvalue)
+ end
+ end
+ end)
----------------------------------------------------------------------------------------------------
s = m:section(TypedSection, "callthrough_numbers", translate("Call-through Numbers"),
- translate("Designate numbers which will be allowed to call through this system and which user's\
- privileges it will have."))
+ translate("Designate numbers which will be allowed to call through this system and which user's\
+ privileges it will have."))
s.anonymous = true
s.addremove = true
p.default = "yes"
user = s:option(Value, "defaultuser", translate("User Name"),
- translate("The number(s) specified above will be able to dial out with this user's providers.\
- Invalid usernames are dropped silently, please verify that the entry was accepted."))
+ translate("The number(s) specified above will be able to dial out with this user's providers.\
+ Invalid usernames are dropped silently, please verify that the entry was accepted."))
function user.write(self, section, value)
trimuser = luci.util.trim(value)
if allvalidusers[trimuser] == true then
end
pwd = s:option(Value, "pin", translate("PIN"),
- translate("Your PIN disappears when saved for your protection. It will be changed\
- only when you enter a value different from the saved one. Leaving the PIN\
- empty is possible, but please beware of the security implications."))
+ translate("Your PIN disappears when saved for your protection. It will be changed\
+ only when you enter a value different from the saved one. Leaving the PIN\
+ empty is possible, but please beware of the security implications."))
pwd.password = true
pwd.rmempty = false
----------------------------------------------------------------------------------------------------
s = m:section(NamedSection, "blacklisting", "call_routing", translate("Blacklisted Numbers"),
- translate("Enter phone numbers that you want to decline calls from automatically.\
- You should probably omit the country code and any leading\
- zeroes, but please experiment to make sure you are blocking numbers from your\
- desired area successfully."))
+ translate("Enter phone numbers that you want to decline calls from automatically.\
+ You should probably omit the country code and any leading\
+ zeroes, but please experiment to make sure you are blocking numbers from your\
+ desired area successfully."))
s.anonymous = true
b = s:option(DynamicList, "blacklist1", translate("Dynamic List of Blacklisted Numbers"),
- translate("Specify numbers individually here. Press enter to add more numbers."))
+ translate("Specify numbers individually here. Press enter to add more numbers."))
b.cast = "string"
b.datatype = "uinteger"
b = s:option(Value, "blacklist2", translate("Space-Separated List of Blacklisted Numbers"),
- translate("Copy-paste large lists of numbers here."))
+ translate("Copy-paste large lists of numbers here."))
b.template = "cbi/tvalue"
b.rows = 3
defaultstatusmessage = "PBX online, may lose messages"
m = Map (modulename, translate("Google Accounts"),
- translate("This is where you set up your Google (Talk and Voice) Accounts, in order to start\
- using them for dialing and receiving calls (voice chat and real phone calls). Click \"Add\"\
- to add as many accounts as you wish."))
+ translate("This is where you set up your Google (Talk and Voice) Accounts, in order to start\
+ using them for dialing and receiving calls (voice chat and real phone calls). Click \"Add\"\
+ to add as many accounts as you wish."))
-- Recreate the config, and restart services after changes are commited to the configuration.
function m.on_after_commit(self)
-- Create a field "name" for each account which identifies the account in the backend.
commit = false
m.uci:foreach(modulename, "gtalk_jabber",
- function(s1)
- if s1.username ~= nil then
- name=string.gsub(s1.username, "%W", "_")
- if s1.name ~= name then
- m.uci:set(modulename, s1['.name'], "name", name)
- commit = true
- end
- end
- end)
+ function(s1)
+ if s1.username ~= nil then
+ name=string.gsub(s1.username, "%W", "_")
+ if s1.name ~= name then
+ m.uci:set(modulename, s1['.name'], "name", name)
+ commit = true
+ end
+ end
+ end)
if commit == true then m.uci:commit(modulename) end
luci.sys.call("/etc/init.d/pbx-" .. server .. " restart 1\>/dev/null 2\>/dev/null")
s:option(Value, "username", translate("Email"))
pwd = s:option(Value, "secret", translate("Password"),
- translate("When your password is saved, it disappears from this field and is not displayed\
- for your protection. The previously saved password will be changed only when you\
- enter a value different from the saved one."))
+ translate("When your password is saved, it disappears from this field and is not displayed\
+ for your protection. The previously saved password will be changed only when you\
+ enter a value different from the saved one."))
pwd.password = true
pwd.rmempty = false
p = s:option(ListValue, "register",
- translate("Enable Incoming Calls (See Status, Message below)"),
- translate("When somebody starts voice chat with your GTalk account or calls the GVoice,\
- number (if you have Google Voice), the call will be forwarded to any users\
- that are online (registered using a SIP device or softphone) and permitted to\
- receive the call. If you have Google Voice, you must go to your GVoice settings and\
- forward calls to Google chat in order to actually receive calls made to your\
- GVoice number. If you have trouble receiving calls from GVoice, experiment\
- with the Call Screening option in your GVoice Settings. Finally, make sure no other\
- client is online with this account (browser in gmail, mobile/desktop Google Talk\
- App) as it may interfere."))
+ translate("Enable Incoming Calls (See Status, Message below)"),
+ translate("When somebody starts voice chat with your GTalk account or calls the GVoice,\
+ number (if you have Google Voice), the call will be forwarded to any users\
+ that are online (registered using a SIP device or softphone) and permitted to\
+ receive the call. If you have Google Voice, you must go to your GVoice settings and\
+ forward calls to Google chat in order to actually receive calls made to your\
+ GVoice number. If you have trouble receiving calls from GVoice, experiment\
+ with the Call Screening option in your GVoice Settings. Finally, make sure no other\
+ client is online with this account (browser in gmail, mobile/desktop Google Talk\
+ App) as it may interfere."))
p:value("yes", translate("Yes"))
p:value("no", translate("No"))
p.default = "yes"
p = s:option(ListValue, "make_outgoing_calls", translate("Enable Outgoing Calls"),
- translate("Use this account to make outgoing calls as configured in the \"Call Routing\" section."))
+ translate("Use this account to make outgoing calls as configured in the \"Call Routing\" section."))
p:value("yes", translate("Yes"))
p:value("no", translate("No"))
p.default = "yes"
st.default = defaultstatus
stm = s:option(Value, "statusmessage", translate("Account Status Message"),
- translate("Avoid using anything but alpha-numeric characters, space, comma, and period."))
+ translate("Avoid using anything but alpha-numeric characters, space, comma, and period."))
stm:depends("register", "yes")
stm.default = defaultstatusmessage
modulename = "pbx-users"
modulenamecalls = "pbx-calls"
modulenameadvanced = "pbx-advanced"
-
+
+
m = Map (modulename, translate("User Accounts"),
- translate("Here you must configure at least one SIP account, which you\
- will use to register with this service. Use this account either in an analog telephony\
- adapter (ATA), or in a SIP softphone like CSipSimple, Linphone, or Sipdroid on your\
- Android smartphone, or X-lite or Ekiga on your computer. By default, all SIP accounts\
- will ring simultaneously if a call is made to one of your VoIP provider accounts or GV\
- numbers."))
+ translate("Here you must configure at least one SIP account, which you\
+ will use to register with this service. Use this account either in an analog telephony\
+ adapter (ATA), or in a SIP softphone like CSipSimple, Linphone, or Sipdroid on your\
+ Android smartphone, or X-lite or Ekiga on your computer. By default, all SIP accounts\
+ will ring simultaneously if a call is made to one of your VoIP provider accounts or GV\
+ numbers."))
-- Recreate the config, and restart services after changes are commited to the configuration.
function m.on_after_commit(self)
- --allusers = ""
- --ringusers = ""
- --
- ---- Create two lists of users - one of all users and one of users enabled for incoming calls.
- --m.uci:foreach(modulename, "local_user",
- -- function(s1)
- -- allusers = allusers .. " " .. s1.defaultuser
- -- if s1.ring == "yes" then
- -- ringusers = ringusers .. " " .. s1.defaultuser
- -- end
- -- end)
- --
- --m.uci:set (modulenamecalls, "valid_users", "allusers", allusers)
- --m.uci:set (modulenamecalls, "valid_users", "ringusers", ringusers)
- --m.uci:commit (modulenamecalls)
-
- luci.sys.call("/etc/init.d/pbx-" .. server .. " restart 1\>/dev/null 2\>/dev/null")
- luci.sys.call("/etc/init.d/" .. server .. " restart 1\>/dev/null 2\>/dev/null")
+ luci.sys.call("/etc/init.d/pbx-" .. server .. " restart 1\>/dev/null 2\>/dev/null")
+ luci.sys.call("/etc/init.d/" .. server .. " restart 1\>/dev/null 2\>/dev/null")
end
externhost = m.uci:get(modulenameadvanced, "advanced", "externhost")
end
s:option(DummyValue, "ipaddr", translate("Server Setting for Local SIP Devices"),
- translate("Enter this IP (or IP:port) in the Server/Registrar setting of SIP devices you will\
- use ONLY locally and never from a remote location.")).default = ipaddr
+ translate("Enter this IP (or IP:port) in the Server/Registrar setting of SIP devices you will\
+ use ONLY locally and never from a remote location.")).default = ipaddr
if externhost ~= nil then
if bindport ~= nil then
externhost = externhost .. ":" .. bindport
end
s:option(DummyValue, "externhost", translate("Server Setting for Remote SIP Devices"),
- translate("Enter this hostname (or hostname:port) in the Server/Registrar setting of SIP\
- devices you will use from a remote location (they will work locally too).")
- ).default = externhost
+ translate("Enter this hostname (or hostname:port) in the Server/Registrar setting of SIP\
+ devices you will use from a remote location (they will work locally too).")
+ ).default = externhost
end
if bindport ~= nil then
- s:option(DummyValue, "bindport", translate("Port Setting for SIP Devices"),
- translatef("If setting Server/Registrar to %s or %s does not work for you, try setting\
- it to %s or %s and entering this port number in a separate field which specifies the\
- Server/Registrar port number. Beware that some devices have a confusing\
- setting which sets the port where SIP requests originate from on the SIP\
- device itself (bind port). The port specified on this page is NOT this bind port\
- but the this service listens on.",
- ipaddr, externhost, just_ipaddr, just_externhost)).default = bindport
+ s:option(DummyValue, "bindport", translate("Port Setting for SIP Devices"),
+ translatef("If setting Server/Registrar to %s or %s does not work for you, try setting\
+ it to %s or %s and entering this port number in a separate field which specifies the\
+ Server/Registrar port number. Beware that some devices have a confusing\
+ setting which sets the port where SIP requests originate from on the SIP\
+ device itself (bind port). The port specified on this page is NOT this bind port\
+ but the this service listens on.",
+ ipaddr, externhost, just_ipaddr, just_externhost)).default = bindport
end
-----------------------------------------------------------------------------
s.addremove = true
s:option(Value, "fullname", translate("Full Name"),
- translate("You can specify a real name to show up in the Caller ID here."))
+ translate("You can specify a real name to show up in the Caller ID here."))
du = s:option(Value, "defaultuser", translate("User Name"),
- translate("Use (four to five digit) numeric user name if you are connecting normal telephones\
- with ATAs to this system (so they can dial user names)."))
+ translate("Use (four to five digit) numeric user name if you are connecting normal telephones\
+ with ATAs to this system (so they can dial user names)."))
du.datatype = "uciname"
pwd = s:option(Value, "secret", translate("Password"),
- translate("Your password disappears when saved for your protection. It will be changed\
- only when you enter a value different from the saved one."))
+ translate("Your password disappears when saved for your protection. It will be changed\
+ only when you enter a value different from the saved one."))
pwd.password = true
pwd.rmempty = false
modulename = "pbx-voip"
m = Map (modulename, translate("SIP Accounts"),
- translate("This is where you set up your SIP (VoIP) accounts ts like Sipgate, SipSorcery,\
- the popular Betamax providers, and any other providers with SIP settings in order to start \
- using them for dialing and receiving calls (SIP uri and real phone calls). Click \"Add\" to\
- add as many accounts as you wish."))
+ translate("This is where you set up your SIP (VoIP) accounts ts like Sipgate, SipSorcery,\
+ the popular Betamax providers, and any other providers with SIP settings in order to start \
+ using them for dialing and receiving calls (SIP uri and real phone calls). Click \"Add\" to\
+ add as many accounts as you wish."))
-- Recreate the config, and restart services after changes are commited to the configuration.
function m.on_after_commit(self)
commit = false
-- Create a field "name" for each account which identifies the account in the backend.
m.uci:foreach(modulename, "voip_provider",
- function(s1)
- if s1.defaultuser ~= nil and s1.host ~= nil then
- name=string.gsub(s1.defaultuser.."_"..s1.host, "%W", "_")
- if s1.name ~= name then
- m.uci:set(modulename, s1['.name'], "name", name)
- commit = true
- end
- end
- end)
+ function(s1)
+ if s1.defaultuser ~= nil and s1.host ~= nil then
+ name=string.gsub(s1.defaultuser.."_"..s1.host, "%W", "_")
+ if s1.name ~= name then
+ m.uci:set(modulename, s1['.name'], "name", name)
+ commit = true
+ end
+ end
+ end)
if commit == true then m.uci:commit(modulename) end
luci.sys.call("/etc/init.d/pbx-" .. server .. " restart 1\>/dev/null 2\>/dev/null")
s:option(Value, "defaultuser", translate("User Name"))
pwd = s:option(Value, "secret", translate("Password"),
- translate("When your password is saved, it disappears from this field and is not displayed\
- for your protection. The previously saved password will be changed only when you\
- enter a value different from the saved one."))
+ translate("When your password is saved, it disappears from this field and is not displayed\
+ for your protection. The previously saved password will be changed only when you\
+ enter a value different from the saved one."))
h.datatype = "host"
p = s:option(ListValue, "register", translate("Enable Incoming Calls (Register via SIP)"),
- translate("This option should be set to \"Yes\" if you have a DID \(real telephone number\)\
- associated with this SIP account or want to receive SIP uri calls through this\
- provider."))
+ translate("This option should be set to \"Yes\" if you have a DID \(real telephone number\)\
+ associated with this SIP account or want to receive SIP uri calls through this\
+ provider."))
p:value("yes", translate("Yes"))
p:value("no", translate("No"))
p.default = "yes"
p = s:option(ListValue, "make_outgoing_calls", translate("Enable Outgoing Calls"),
- translate("Use this account to make outgoing calls."))
+ translate("Use this account to make outgoing calls."))
p:value("yes", translate("Yes"))
p:value("no", translate("No"))
p.default = "yes"
from = s:option(Value, "fromdomain",
- translate("SIP Realm (needed by some providers)"))
+ translate("SIP Realm (needed by some providers)"))
from.optional = true
from.datatype = "host"
for lpos,splitline in ipairs(splitlines) do
loutput = ""
for ipos,index in ipairs(indices) do
- if splitline[index] ~= nil then
- loutput = loutput .. string.format("%-50s", splitline[index])
- else
- loutput = nil
- break
- end
+ if splitline[index] ~= nil then
+ loutput = loutput .. string.format("%-50s", splitline[index])
+ else
+ loutput = nil
+ break
+ end
end
-
+
if loutput ~= nil then
- output = output .. loutput .. "\n"
+ output = output .. loutput .. "\n"
end
end
return output
m = Map (modulename, translate("PBX Main Page"),
- translate("This configuration page allows you to configure a phone system (PBX) service which\
+ translate("This configuration page allows you to configure a phone system (PBX) service which\
permits making phone calls through multiple Google and SIP (like Sipgate,\
SipSorcery, and Betamax) accounts and sharing them among many SIP devices. \
Note that Google accounts, SIP accounts, and local user accounts are configured in the \
-----------------------------------------------------------------------------------------
s = m:section(NamedSection, "connection_status", "main",
- translate("Service Control and Connection Status"))
+ translate("Service Control and Connection Status"))
s.anonymous = true
s:option (DummyValue, "status", translate("Service Status"))
return format_indices(regs, {1, 5}) ..
format_indices(jabs, {2, 4}) .. "\n" ..
- format_indices(usrs, {1} ) .. "\n" .. chan
+ format_indices(usrs, {1} ) .. "\n" .. chan
elseif server == "freeswitch" then
return "Freeswitch is not supported yet.\n"
# In this string, we concatenate all local users enabled to receive calls
# readily formatted for the Dial command.
localusers_to_ring=""
+
# In this string, we keep a list of all users that are enabled for outgoing
# calls. It is used at the end to create the user contexts.
localusers_can_dial=""
# Copies the template files which we don't edit.
copy_unedited_templates_over()
{
- cp $TMPL_ASTERISK $WORKDIR/asterisk.conf
- cp $TMPL_GTALK $WORKDIR/gtalk.conf
- cp $TMPL_INDICATIONS $WORKDIR/indications.conf
- cp $TMPL_LOGGER $WORKDIR/logger.conf
- cp $TMPL_MANAGER $WORKDIR/manager.conf
- cp $TMPL_MODULES $WORKDIR/modules.conf
+ cp $TMPL_ASTERISK $WORKDIR/asterisk.conf
+ cp $TMPL_GTALK $WORKDIR/gtalk.conf
+ cp $TMPL_INDICATIONS $WORKDIR/indications.conf
+ cp $TMPL_LOGGER $WORKDIR/logger.conf
+ cp $TMPL_MANAGER $WORKDIR/manager.conf
+ cp $TMPL_MODULES $WORKDIR/modules.conf
}
# Touches all the included files, to prevent asterisk from refusing to
# Puts together all the extensions.conf related configuration.
pbx_create_extensions_config()
{
- sed "s/|LOCALUSERS|/$localusers_to_ring/g" $TMPL_EXTENSIONS > $WORKDIR/extensions.conf
- mv $WORKDIR/inext.TMP $WORKDIR/extensions_incoming.conf
- cp $TMPL_EXTINCNTXTGTALKHDR $WORKDIR/extensions_incoming_gtalk.conf
- cat $WORKDIR/outextgtalk.TMP >> $WORKDIR/extensions_incoming_gtalk.conf 2>/dev/null
- rm -f $WORKDIR/outextgtalk.TMP
- mv $WORKDIR/blacklist.TMP $WORKDIR/extensions_blacklist.conf
- mv $WORKDIR/userext.TMP $WORKDIR/extensions_user.conf
- cp $TMPL_EXTCTHRUHDR $WORKDIR/extensions_callthrough.conf
- cat $WORKDIR/callthrough.TMP >> $WORKDIR/extensions_callthrough.conf 2>/dev/null
- rm -f $WORKDIR/callthrough.TMP
- cat $TMPL_EXTCTHRUCHECKHDR >> $WORKDIR/extensions_callthrough.conf 2>/dev/null
- cat $WORKDIR/callthroughcheck.TMP >> $WORKDIR/extensions_callthrough.conf 2>/dev/null
- rm -f $WORKDIR/callthroughcheck.TMP
- cat $TMPL_EXTCTHRUCHECKFTR >> $WORKDIR/extensions_callthrough.conf 2>/dev/null
- rm -f $WORKDIR/outext-*.TMP
- rm -f $WORKDIR/localext.TMP
+ sed "s/|LOCALUSERS|/$localusers_to_ring/g" $TMPL_EXTENSIONS > $WORKDIR/extensions.conf
+ mv $WORKDIR/inext.TMP $WORKDIR/extensions_incoming.conf
+ cp $TMPL_EXTINCNTXTGTALKHDR $WORKDIR/extensions_incoming_gtalk.conf
+ cat $WORKDIR/outextgtalk.TMP >> $WORKDIR/extensions_incoming_gtalk.conf 2>/dev/null
+ rm -f $WORKDIR/outextgtalk.TMP
+ mv $WORKDIR/blacklist.TMP $WORKDIR/extensions_blacklist.conf
+ mv $WORKDIR/userext.TMP $WORKDIR/extensions_user.conf
+ cp $TMPL_EXTCTHRUHDR $WORKDIR/extensions_callthrough.conf
+ cat $WORKDIR/callthrough.TMP >> $WORKDIR/extensions_callthrough.conf 2>/dev/null
+ rm -f $WORKDIR/callthrough.TMP
+ cat $TMPL_EXTCTHRUCHECKHDR >> $WORKDIR/extensions_callthrough.conf 2>/dev/null
+ cat $WORKDIR/callthroughcheck.TMP >> $WORKDIR/extensions_callthrough.conf 2>/dev/null
+ rm -f $WORKDIR/callthroughcheck.TMP
+ cat $TMPL_EXTCTHRUCHECKFTR >> $WORKDIR/extensions_callthrough.conf 2>/dev/null
+ rm -f $WORKDIR/outext-*.TMP
+ rm -f $WORKDIR/localext.TMP
}
# Puts together all the sip.conf related configuration.
pbx_create_sip_config()
{
- mv $WORKDIR/sip_regs.TMP $WORKDIR/sip_registrations.conf
- mv $WORKDIR/sip_peers.TMP $WORKDIR/sip_peers.conf
- mv $WORKDIR/sip_users.TMP $WORKDIR/sip_users.conf
+ mv $WORKDIR/sip_regs.TMP $WORKDIR/sip_registrations.conf
+ mv $WORKDIR/sip_peers.TMP $WORKDIR/sip_peers.conf
+ mv $WORKDIR/sip_users.TMP $WORKDIR/sip_users.conf
}
# Creates the jabber.conf related config
pbx_create_jabber_config()
{
- cp $TMPL_JABBER $WORKDIR/jabber.conf
- mv $WORKDIR/jabber.TMP $WORKDIR/jabber_users.conf
+ cp $TMPL_JABBER $WORKDIR/jabber.conf
+ mv $WORKDIR/jabber.TMP $WORKDIR/jabber_users.conf
}
# Gets rid of any config files from $ASTERISKDIR not found in $WORKDIR.
clean_up_asterisk_config_dir()
{
- for f in $ASTERISKDIR/* ; do
- basef="`basename $f`"
- if [ ! -e "$WORKDIR/$basef" ] ; then
- rm -rf "$f"
- fi
- done
+ for f in $ASTERISKDIR/* ; do
+ basef="`basename $f`"
+ if [ ! -e "$WORKDIR/$basef" ] ; then
+ rm -rf "$f"
+ fi
+ done
}
# Compares md5sums of the config files in $WORKDIR to those
# wear on flash in embedded devices.
compare_configs_and_copy_changed()
{
- # First, compute md5sums of the config files in $WORKDIR.
- cd $WORKDIR/
- md5sum * > $MD5SUMSFILE
+ # First, compute md5sums of the config files in $WORKDIR.
+ cd $WORKDIR/
+ md5sum * > $MD5SUMSFILE
- # Now, check the files in $ASTERISKDIR against the md5sums.
- cd $ASTERISKDIR/
- changed_files="`md5sum -c $MD5SUMSFILE 2>/dev/null | fgrep ": FAILED" | awk -F: '{print $1}'`"
+ # Now, check the files in $ASTERISKDIR against the md5sums.
+ cd $ASTERISKDIR/
+ changed_files="`md5sum -c $MD5SUMSFILE 2>/dev/null | fgrep ": FAILED" | awk -F: '{print $1}'`"
- rm -f $MD5SUMSFILE
+ rm -f $MD5SUMSFILE
- [ -z "$changed_files" ] && return
+ [ -z "$changed_files" ] && return
- # Now copy over the changed files.
- for f in $changed_files ; do
- cp "$WORKDIR/$f" "$ASTERISKDIR/$f"
- done
+ # Now copy over the changed files.
+ for f in $changed_files ; do
+ cp "$WORKDIR/$f" "$ASTERISKDIR/$f"
+ done
}
# Calls the functions that create the final config files
# Gets rid of $WORKDIR
pbx_assemble_and_copy_config()
{
- mkdir -p $ASTERISKDIR
+ mkdir -p $ASTERISKDIR
- copy_unedited_templates_over
- create_included_files
- pbx_create_extensions_config
- pbx_create_sip_config
- pbx_create_jabber_config
+ copy_unedited_templates_over
+ create_included_files
+ pbx_create_extensions_config
+ pbx_create_sip_config
+ pbx_create_jabber_config
- touch $WORKDIR/features.conf
+ touch $WORKDIR/features.conf
- # At this point, $WORKDIR should contain a complete, working config.
- clean_up_asterisk_config_dir
+ # At this point, $WORKDIR should contain a complete, working config.
+ clean_up_asterisk_config_dir
- compare_configs_and_copy_changed
+ compare_configs_and_copy_changed
- [ ! -d $ASTERISKDIR/manager.d ] && mkdir -p $ASTERISKDIR/manager.d/
+ [ ! -d $ASTERISKDIR/manager.d ] && mkdir -p $ASTERISKDIR/manager.d/
- # Get rid of the working directory
- rm -rf $WORKDIR/
+ # Get rid of the working directory
+ rm -rf $WORKDIR/
}
# Creates configuration for a user and adds it to the temporary file that holds
# all users configured so far.
pbx_add_user()
{
- local fullname
- local defaultuser
- local secret
- local ring
- local can_call
-
- config_get fullname $1 fullname
- config_get defaultuser $1 defaultuser
- config_get secret $1 secret
- config_get ring $1 ring
- config_get can_call $1 can_call
-
- [ -z "$defaultuser" -o -z "$secret" ] && return
- [ -z "$fullname" ] && fullname="$defaultuser"
-
- sed "s/|DEFAULTUSER|/$defaultuser/g" $TMPL_SIPUSR > $WORKDIR/sip_user.tmp
-
- if [ "$can_call" = "yes" ] ; then
- # Add user to list of all users that are allowed to make calls.
- localusers_can_dial="$localusers_can_dial $defaultuser"
- sed -i "s/|CONTEXTNAME|/$defaultuser/g" $WORKDIR/sip_user.tmp
- else
- sed -i "s/|CONTEXTNAME|/$HANGUPCNTXT/g" $WORKDIR/sip_user.tmp
- fi
-
- # Add this user's configuration to the temp file containing all user configs.
- sed "s/|FULLNAME|/$fullname/" $WORKDIR/sip_user.tmp |\
- sed "s/|SECRET|/$secret/g" >> $WORKDIR/sip_users.TMP
-
- if [ "$ring" = "yes" ] ; then
- if [ -z "$localusers_to_ring" ] ; then
- localusers_to_ring="SIP\/$defaultuser"
- else
- localusers_to_ring="$localusers_to_ring\&SIP\/$defaultuser"
- fi
- fi
-
- # Add configuration which allows local users to call each other.
- sed "s/|DEFAULTUSER|/$defaultuser/g" $TMPL_EXTOUTLOCAL >> $WORKDIR/localext.TMP
-
- rm -f $WORKDIR/sip_user.tmp
+ local fullname
+ local defaultuser
+ local secret
+ local ring
+ local can_call
+
+ config_get fullname $1 fullname
+ config_get defaultuser $1 defaultuser
+ config_get secret $1 secret
+ config_get ring $1 ring
+ config_get can_call $1 can_call
+
+ [ -z "$defaultuser" -o -z "$secret" ] && return
+ [ -z "$fullname" ] && fullname="$defaultuser"
+
+ sed "s/|DEFAULTUSER|/$defaultuser/g" $TMPL_SIPUSR > $WORKDIR/sip_user.tmp
+
+ if [ "$can_call" = "yes" ] ; then
+ # Add user to list of all users that are allowed to make calls.
+ localusers_can_dial="$localusers_can_dial $defaultuser"
+ sed -i "s/|CONTEXTNAME|/$defaultuser/g" $WORKDIR/sip_user.tmp
+ else
+ sed -i "s/|CONTEXTNAME|/$HANGUPCNTXT/g" $WORKDIR/sip_user.tmp
+ fi
+
+ # Add this user's configuration to the temp file containing all user configs.
+ sed "s/|FULLNAME|/$fullname/" $WORKDIR/sip_user.tmp |\
+ sed "s/|SECRET|/$secret/g" >> $WORKDIR/sip_users.TMP
+
+ if [ "$ring" = "yes" ] ; then
+ if [ -z "$localusers_to_ring" ] ; then
+ localusers_to_ring="SIP\/$defaultuser"
+ else
+ localusers_to_ring="$localusers_to_ring\&SIP\/$defaultuser"
+ fi
+ fi
+
+ # Add configuration which allows local users to call each other.
+ sed "s/|DEFAULTUSER|/$defaultuser/g" $TMPL_EXTOUTLOCAL >> $WORKDIR/localext.TMP
+
+ rm -f $WORKDIR/sip_user.tmp
}
# Creates configuration for a Google account, and adds it to the temporary file that holds
# Also creates the outgoing extensions which are used in users' outgoing contexts.
pbx_add_jabber()
{
- local username
- local secret
- local numprefix
- local register
- local make_outgoing_calls
- local name
- local users_to_ring
- local status
- local statusmessage
-
- config_get username $1 username
- config_get secret $1 secret
- config_get numprefix $1 numprefix
- config_get register $1 register
- config_get make_outgoing_calls $1 make_outgoing_calls
- config_get name $1 name
- config_get status $1 status
- config_get statusmessage $1 statusmessage
-
- [ -z "$username" -o -z "$secret" ] && return
-
- # Construct a jabber entry for this provider.
- sed "s/|USERNAME|/$username/g" $TMPL_JABBERUSER |\
- sed "s/|NAME|/$name/g" > $WORKDIR/jabber.tmp
-
- if [ "$register" = yes ] ; then
- # If this provider is enabled for incoming calls, we need to set the
- # status of the user to something other than unavailable in order to receive calls.
- sed -i "s/|STATUS|/$status/g" $WORKDIR/jabber.tmp
- sed -i "s/|STATUSMESSAGE|/\"$statusmessage\"/g" $WORKDIR/jabber.tmp
-
- users_to_ring="`uci -q get ${MODULENAME}-calls.incoming_calls.$name`"
- # If no users have been specified to ring, we ring all users enabled for incoming calls.
- if [ -z "$users_to_ring" ] ; then
- users_to_ring=$localusers_to_ring
- else
- # Else, we cook up a string formatted for the Dial command
- # with the specified users (SIP/user1&SIP/user2&...). We do it
- # with set, shift and a loop in order to be more tolerant of ugly whitespace
- # messes entered by users.
- set $users_to_ring
- users_to_ring="SIP\/$1" && shift
- for u in $@ ; do users_to_ring=$users_to_ring\\\&SIP\\\/$u ; done
- fi
-
- # Now, we add this account to the gtalk incoming context.
- sed "s/|USERNAME|/$username/g" $TMPL_EXTINCNTXTGTALK |\
- sed "s/|LOCALUSERS|/$users_to_ring/g" >> $WORKDIR/outextgtalk.TMP
- else
- sed -i "s/|STATUS|/$GTALKUNVL/g" $WORKDIR/jabber.tmp
- sed -i "s/|STATUSMESSAGE|/\"\"/g" $WORKDIR/jabber.tmp
- fi
-
- # Add this account's configuration to the temp file containing all account configs.
- sed "s/|SECRET|/$secret/g" $WORKDIR/jabber.tmp >> $WORKDIR/jabber.TMP
-
- # If this provider is enabled for outgoing calls.
- if [ "$make_outgoing_calls" = "yes" ] ; then
-
- numprefix="`uci -q get ${MODULENAME}-calls.outgoing_calls.$name`"
-
- # If no prefixes are specified, then we use "X" which matches any prefix.
- [ -z "$numprefix" ] && numprefix="X"
-
- for p in $numprefix ; do
- sed "s/|NUMPREFIX|/$p/g" $TMPL_EXTOUTGTALK |\
- sed "s/|NAME|/$name/g" >> $WORKDIR/outext-$name.TMP
- done
-
- # Add this provider to the list of enabled outbound providers.
- if [ -z "$outbound_providers" ] ; then
- outbound_providers="$name"
- else
- outbound_providers="$outbound_providers $name"
- fi
- fi
-
- rm -f $WORKDIR/jabber.tmp
+ local username
+ local secret
+ local numprefix
+ local register
+ local make_outgoing_calls
+ local name
+ local users_to_ring
+ local status
+ local statusmessage
+
+ config_get username $1 username
+ config_get secret $1 secret
+ config_get numprefix $1 numprefix
+ config_get register $1 register
+ config_get make_outgoing_calls $1 make_outgoing_calls
+ config_get name $1 name
+ config_get status $1 status
+ config_get statusmessage $1 statusmessage
+
+ [ -z "$username" -o -z "$secret" ] && return
+
+ # Construct a jabber entry for this provider.
+ sed "s/|USERNAME|/$username/g" $TMPL_JABBERUSER |\
+ sed "s/|NAME|/$name/g" > $WORKDIR/jabber.tmp
+
+ if [ "$register" = yes ] ; then
+ # If this provider is enabled for incoming calls, we need to set the
+ # status of the user to something other than unavailable in order to receive calls.
+ sed -i "s/|STATUS|/$status/g" $WORKDIR/jabber.tmp
+ sed -i "s/|STATUSMESSAGE|/\"$statusmessage\"/g" $WORKDIR/jabber.tmp
+
+ users_to_ring="`uci -q get ${MODULENAME}-calls.incoming_calls.$name`"
+ # If no users have been specified to ring, we ring all users enabled for incoming calls.
+ if [ -z "$users_to_ring" ] ; then
+ users_to_ring=$localusers_to_ring
+ else
+ # Else, we cook up a string formatted for the Dial command
+ # with the specified users (SIP/user1&SIP/user2&...). We do it
+ # with set, shift and a loop in order to be more tolerant of ugly whitespace
+ # messes entered by users.
+ set $users_to_ring
+ users_to_ring="SIP\/$1" && shift
+ for u in $@ ; do users_to_ring=$users_to_ring\\\&SIP\\\/$u ; done
+ fi
+
+ # Now, we add this account to the gtalk incoming context.
+ sed "s/|USERNAME|/$username/g" $TMPL_EXTINCNTXTGTALK |\
+ sed "s/|LOCALUSERS|/$users_to_ring/g" >> $WORKDIR/outextgtalk.TMP
+ else
+ sed -i "s/|STATUS|/$GTALKUNVL/g" $WORKDIR/jabber.tmp
+ sed -i "s/|STATUSMESSAGE|/\"\"/g" $WORKDIR/jabber.tmp
+ fi
+
+ # Add this account's configuration to the temp file containing all account configs.
+ sed "s/|SECRET|/$secret/g" $WORKDIR/jabber.tmp >> $WORKDIR/jabber.TMP
+
+ # If this provider is enabled for outgoing calls.
+ if [ "$make_outgoing_calls" = "yes" ] ; then
+
+ numprefix="`uci -q get ${MODULENAME}-calls.outgoing_calls.$name`"
+
+ # If no prefixes are specified, then we use "X" which matches any prefix.
+ [ -z "$numprefix" ] && numprefix="X"
+
+ for p in $numprefix ; do
+ sed "s/|NUMPREFIX|/$p/g" $TMPL_EXTOUTGTALK |\
+ sed "s/|NAME|/$name/g" >> $WORKDIR/outext-$name.TMP
+ done
+
+ # Add this provider to the list of enabled outbound providers.
+ if [ -z "$outbound_providers" ] ; then
+ outbound_providers="$name"
+ else
+ outbound_providers="$outbound_providers $name"
+ fi
+ fi
+
+ rm -f $WORKDIR/jabber.tmp
}
# Creates configuration for a SIP provider account, and adds it to the temporary file that holds
# Also creates the outgoing extensions which are used in users' outgoing contexts.
pbx_add_peer()
{
- local defaultuser
- local secret
- local host
- local fromdomain
- local register
- local numprefix
- local make_outgoing_calls
- local name
- local users_to_ring
- local port
- local outboundproxy
-
- config_get defaultuser $1 defaultuser
- config_get secret $1 secret
- config_get host $1 host
- config_get port $1 port
- config_get outbountproxy $1 outboundproxy
- config_get fromdomain $1 fromdomain
- config_get register $1 register
- config_get numprefix $1 numprefix
- config_get make_outgoing_calls $1 make_outgoing_calls
- config_get name $1 name
-
- [ -z "$defaultuser" -o -z "$secret" -o -z "$host" ] && return
- [ -z "$fromdomain" ] && fromdomain=$host
- [ -n "$port" ] && port="port=$port"
- [ -n "$outboundproxy" ] && outboundproxy="outboundproxy=$outboundproxy"
-
- # Construct a sip peer entry for this provider.
- sed "s/|DEFAULTUSER|/$defaultuser/" $TMPL_SIPPEER > $WORKDIR/sip_peer.tmp
- sed -i "s/|NAME|/$name/" $WORKDIR/sip_peer.tmp
- sed -i "s/|FROMUSER|/$defaultuser/" $WORKDIR/sip_peer.tmp
- sed -i "s/|SECRET|/$secret/" $WORKDIR/sip_peer.tmp
- sed -i "s/|HOST|/$host/" $WORKDIR/sip_peer.tmp
- sed -i "s/|PORT|/$port/" $WORKDIR/sip_peer.tmp
- sed -i "s/|OUTBOUNDPROXY|/$outboundproxy/" $WORKDIR/sip_peer.tmp
- # Add this account's configuration to the temp file containing all account configs.
- sed "s/|FROMDOMAIN|/$host/" $WORKDIR/sip_peer.tmp >> $WORKDIR/sip_peers.TMP
-
- # If this provider is enabled for incoming calls.
- if [ "$register" = "yes" ] ; then
- # Then we create a registration string for this provider.
- sed "s/|DEFAULTUSER|/$defaultuser/g" $TMPL_SIPREG > $WORKDIR/sip_reg.tmp
- sed -i "s/|SECRET|/$secret/g" $WORKDIR/sip_reg.tmp
- sed "s/|NAME|/$name/g" $WORKDIR/sip_reg.tmp >> $WORKDIR/sip_regs.TMP
-
- users_to_ring="`uci -q get ${MODULENAME}-calls.incoming_calls.$name`"
- # If no users have been specified to ring, we ring all users enabled for incoming calls.
- if [ -z "$users_to_ring" ] ; then
- users_to_ring=$localusers_to_ring
- else
- # Else, we cook up a string formatted for the Dial command
- # with the specified users (SIP/user1&SIP/user2&...). We do it
- # with set, shift and a loop in order to be more tolerant of ugly whitespace
- # messes entered by users.
- set $users_to_ring
- users_to_ring="SIP\/$1" && shift
- for u in $@ ; do users_to_ring=$users_to_ring\\\&SIP\\\/$u ; done
- fi
-
- # And we create an incoming calls context for this provider.
- sed "s/|NAME|/$name/g" $TMPL_EXTINCNTXTSIP |\
- sed "s/|LOCALUSERS|/$users_to_ring/g" >> $WORKDIR/inext.TMP
- fi
-
- # If this provider is enabled for outgoing calls.
- if [ "$make_outgoing_calls" = "yes" ] ; then
-
- numprefix="`uci -q get ${MODULENAME}-calls.outgoing_calls.$name`"
- # If no prefixes are specified, then we use "X" which matches any prefix.
- [ -z "$numprefix" ] && numprefix="X"
- for p in $numprefix ; do
- sed "s/|NUMPREFIX|/$p/g" $TMPL_EXTOUTSIP |\
- sed "s/|NAME|/$name/g" >> $WORKDIR/outext-$name.TMP
- done
-
- # Add this provider to the list of enabled outbound providers.
- if [ -z "$outbound_providers" ] ; then
- outbound_providers="$name"
- else
- outbound_providers="$outbound_providers $name"
- fi
- fi
-
- rm -f $WORKDIR/sip_peer.tmp
- rm -f $WORKDIR/sip_reg.tmp
+ local defaultuser
+ local secret
+ local host
+ local fromdomain
+ local register
+ local numprefix
+ local make_outgoing_calls
+ local name
+ local users_to_ring
+ local port
+ local outboundproxy
+
+ config_get defaultuser $1 defaultuser
+ config_get secret $1 secret
+ config_get host $1 host
+ config_get port $1 port
+ config_get outbountproxy $1 outboundproxy
+ config_get fromdomain $1 fromdomain
+ config_get register $1 register
+ config_get numprefix $1 numprefix
+ config_get make_outgoing_calls $1 make_outgoing_calls
+ config_get name $1 name
+
+ [ -z "$defaultuser" -o -z "$secret" -o -z "$host" ] && return
+ [ -z "$fromdomain" ] && fromdomain=$host
+ [ -n "$port" ] && port="port=$port"
+ [ -n "$outboundproxy" ] && outboundproxy="outboundproxy=$outboundproxy"
+
+ # Construct a sip peer entry for this provider.
+ sed "s/|DEFAULTUSER|/$defaultuser/" $TMPL_SIPPEER > $WORKDIR/sip_peer.tmp
+ sed -i "s/|NAME|/$name/" $WORKDIR/sip_peer.tmp
+ sed -i "s/|FROMUSER|/$defaultuser/" $WORKDIR/sip_peer.tmp
+ sed -i "s/|SECRET|/$secret/" $WORKDIR/sip_peer.tmp
+ sed -i "s/|HOST|/$host/" $WORKDIR/sip_peer.tmp
+ sed -i "s/|PORT|/$port/" $WORKDIR/sip_peer.tmp
+ sed -i "s/|OUTBOUNDPROXY|/$outboundproxy/" $WORKDIR/sip_peer.tmp
+ # Add this account's configuration to the temp file containing all account configs.
+ sed "s/|FROMDOMAIN|/$host/" $WORKDIR/sip_peer.tmp >> $WORKDIR/sip_peers.TMP
+
+ # If this provider is enabled for incoming calls.
+ if [ "$register" = "yes" ] ; then
+ # Then we create a registration string for this provider.
+ sed "s/|DEFAULTUSER|/$defaultuser/g" $TMPL_SIPREG > $WORKDIR/sip_reg.tmp
+ sed -i "s/|SECRET|/$secret/g" $WORKDIR/sip_reg.tmp
+ sed "s/|NAME|/$name/g" $WORKDIR/sip_reg.tmp >> $WORKDIR/sip_regs.TMP
+
+ users_to_ring="`uci -q get ${MODULENAME}-calls.incoming_calls.$name`"
+ # If no users have been specified to ring, we ring all users enabled for incoming calls.
+ if [ -z "$users_to_ring" ] ; then
+ users_to_ring=$localusers_to_ring
+ else
+ # Else, we cook up a string formatted for the Dial command
+ # with the specified users (SIP/user1&SIP/user2&...). We do it
+ # with set, shift and a loop in order to be more tolerant of ugly whitespace
+ # messes entered by users.
+ set $users_to_ring
+ users_to_ring="SIP\/$1" && shift
+ for u in $@ ; do users_to_ring=$users_to_ring\\\&SIP\\\/$u ; done
+ fi
+
+ # And we create an incoming calls context for this provider.
+ sed "s/|NAME|/$name/g" $TMPL_EXTINCNTXTSIP |\
+ sed "s/|LOCALUSERS|/$users_to_ring/g" >> $WORKDIR/inext.TMP
+ fi
+
+ # If this provider is enabled for outgoing calls.
+ if [ "$make_outgoing_calls" = "yes" ] ; then
+
+ numprefix="`uci -q get ${MODULENAME}-calls.outgoing_calls.$name`"
+ # If no prefixes are specified, then we use "X" which matches any prefix.
+ [ -z "$numprefix" ] && numprefix="X"
+ for p in $numprefix ; do
+ sed "s/|NUMPREFIX|/$p/g" $TMPL_EXTOUTSIP |\
+ sed "s/|NAME|/$name/g" >> $WORKDIR/outext-$name.TMP
+ done
+
+ # Add this provider to the list of enabled outbound providers.
+ if [ -z "$outbound_providers" ] ; then
+ outbound_providers="$name"
+ else
+ outbound_providers="$outbound_providers $name"
+ fi
+ fi
+
+ rm -f $WORKDIR/sip_peer.tmp
+ rm -f $WORKDIR/sip_reg.tmp
}
# For all local users enabled for outbound calls, creates a context
# allowed to use.
pbx_create_user_contexts()
{
- local providers
-
- for u in $localusers_can_dial ; do
- sed "s/|DEFAULTUSER|/$u/g" $TMPL_EXTUSERCNTXTHDR >> $WORKDIR/userext.TMP
- cat $WORKDIR/localext.TMP >> $WORKDIR/userext.TMP
- providers="`uci -q get ${MODULENAME}-calls.providers_user_can_use.$u`"
- [ -z "$providers" ] && providers="$outbound_providers"
-
- # For each provider, cat the contents of outext-$name.TMP into the user's outgoing calls extension
- for p in $providers ; do
- [ -f $WORKDIR/outext-$p.TMP ] && cat $WORKDIR/outext-$p.TMP >> $WORKDIR/userext.TMP
- done
- cat $TMPL_EXTUSERCNTXTFTR >> $WORKDIR/userext.TMP
- done
+ local providers
+
+ for u in $localusers_can_dial ; do
+ sed "s/|DEFAULTUSER|/$u/g" $TMPL_EXTUSERCNTXTHDR >> $WORKDIR/userext.TMP
+ cat $WORKDIR/localext.TMP >> $WORKDIR/userext.TMP
+ providers="`uci -q get ${MODULENAME}-calls.providers_user_can_use.$u`"
+ [ -z "$providers" ] && providers="$outbound_providers"
+
+ # For each provider, cat the contents of outext-$name.TMP into the user's outgoing calls extension
+ for p in $providers ; do
+ [ -f $WORKDIR/outext-$p.TMP ] && cat $WORKDIR/outext-$p.TMP >> $WORKDIR/userext.TMP
+ done
+ cat $TMPL_EXTUSERCNTXTFTR >> $WORKDIR/userext.TMP
+ done
}
# Creates the blacklist context which hangs up on blacklisted numbers.
pbx_add_blacklist()
{
- local blacklist1
- local blacklist2
-
- config_get blacklist1 blacklisting blacklist1
- config_get blacklist2 blacklisting blacklist2
-
- # We create the blacklist context no matter whether the blacklist
- # actually contains entries or not, since the PBX will send calls
- # to the context for a check against the list anyway.
- cp $TMPL_EXTBLKLISTHDR $WORKDIR/blacklist.TMP
- for n in $blacklist1 $blacklist2 ; do
- sed "s/|BLACKLISTITEM|/$n/g" $TMPL_EXTBLKLIST >> $WORKDIR/blacklist.TMP
- done
- cat $TMPL_EXTBLKLISTFTR >> $WORKDIR/blacklist.TMP
+ local blacklist1
+ local blacklist2
+
+ config_get blacklist1 blacklisting blacklist1
+ config_get blacklist2 blacklisting blacklist2
+
+ # We create the blacklist context no matter whether the blacklist
+ # actually contains entries or not, since the PBX will send calls
+ # to the context for a check against the list anyway.
+ cp $TMPL_EXTBLKLISTHDR $WORKDIR/blacklist.TMP
+ for n in $blacklist1 $blacklist2 ; do
+ sed "s/|BLACKLISTITEM|/$n/g" $TMPL_EXTBLKLIST >> $WORKDIR/blacklist.TMP
+ done
+ cat $TMPL_EXTBLKLISTFTR >> $WORKDIR/blacklist.TMP
}
# Creates the callthrough context which allows specified numbers to get
# into the PBX and dial out as the configured user.
pbx_add_callthrough()
{
- local callthrough_number_list
- local defaultuser
- local pin
- local enabled
-
- config_get callthrough_number_list $1 callthrough_number_list
- config_get defaultuser $1 defaultuser
- config_get pin $1 pin
- config_get enabled $1 enabled
-
- [ "$enabled" = "no" ] && return
- [ "$defaultuser" = "" ] && return
-
- for callthrough_number in $callthrough_number_list ; do
- sed "s/|NUMBER|/$callthrough_number/g" $TMPL_EXTCTHRUCHECK >> $WORKDIR/callthroughcheck.TMP
-
- sed "s/|NUMBER|/$callthrough_number/g" $TMPL_EXTCTHRU |\
- sed "s/|DEFAULTUSER|/$defaultuser/" |\
- sed "s/|PIN|/$pin/" >> $WORKDIR/callthrough.TMP
- done
+ local callthrough_number_list
+ local defaultuser
+ local pin
+ local enabled
+
+ config_get callthrough_number_list $1 callthrough_number_list
+ config_get defaultuser $1 defaultuser
+ config_get pin $1 pin
+ config_get enabled $1 enabled
+
+ [ "$enabled" = "no" ] && return
+ [ "$defaultuser" = "" ] && return
+
+ for callthrough_number in $callthrough_number_list ; do
+ sed "s/|NUMBER|/$callthrough_number/g" $TMPL_EXTCTHRUCHECK >> $WORKDIR/callthroughcheck.TMP
+
+ sed "s/|NUMBER|/$callthrough_number/g" $TMPL_EXTCTHRU |\
+ sed "s/|DEFAULTUSER|/$defaultuser/" |\
+ sed "s/|PIN|/$pin/" >> $WORKDIR/callthrough.TMP
+ done
}
# Creates sip.conf from its template.
pbx_cook_sip_template()
{
- local useragent
- local externhost
- local bindport
+ local useragent
+ local externhost
+ local bindport
- config_get useragent advanced useragent
- config_get externhost advanced externhost
- config_get bindport advanced bindport
+ config_get useragent advanced useragent
+ config_get externhost advanced externhost
+ config_get bindport advanced bindport
- [ -z "$useragent" ] && useragent="$USERAGENT"
+ [ -z "$useragent" ] && useragent="$USERAGENT"
- sed "s/|USERAGENT|/$useragent/g" $TMPL_SIP > $WORKDIR/sip.conf
+ sed "s/|USERAGENT|/$useragent/g" $TMPL_SIP > $WORKDIR/sip.conf
- if [ -z "$externhost" ] ; then
- sed -i "s/externhost=|EXTERNHOST|//g" $WORKDIR/sip.conf
- else
- sed -i "s/|EXTERNHOST|/$externhost/g" $WORKDIR/sip.conf
- fi
+ if [ -z "$externhost" ] ; then
+ sed -i "s/externhost=|EXTERNHOST|//g" $WORKDIR/sip.conf
+ else
+ sed -i "s/|EXTERNHOST|/$externhost/g" $WORKDIR/sip.conf
+ fi
- if [ -z "$bindport" ] ; then
- sed -i "s/bindport=|BINDPORT|//g" $WORKDIR/sip.conf
- else
- sed -i "s/|BINDPORT|/$bindport/g" $WORKDIR/sip.conf
- fi
+ if [ -z "$bindport" ] ; then
+ sed -i "s/bindport=|BINDPORT|//g" $WORKDIR/sip.conf
+ else
+ sed -i "s/|BINDPORT|/$bindport/g" $WORKDIR/sip.conf
+ fi
}
# Creates rtp.conf from its template.
pbx_cook_rtp_template()
{
- local rtpstart
- local rtpend
+ local rtpstart
+ local rtpend
- config_get rtpstart advanced rtpstart
- config_get rtpend advanced rtpend
+ config_get rtpstart advanced rtpstart
+ config_get rtpend advanced rtpend
- sed "s/|RTPSTART|/$rtpstart/" $TMPL_RTP |\
- sed "s/|RTPEND|/$rtpend/" > $WORKDIR/rtp.conf
+ sed "s/|RTPSTART|/$rtpstart/" $TMPL_RTP |\
+ sed "s/|RTPEND|/$rtpend/" > $WORKDIR/rtp.conf
}
# Makes sure the ownership of specified directories is proper.
pbx_fix_ownership()
{
- chown $ASTUSER:$ASTGROUP $ASTDIRS
- chown $ASTUSER:$ASTGROUP -R $ASTDIRSRECURSIVE
+ chown $ASTUSER:$ASTGROUP $ASTDIRS
+ chown $ASTUSER:$ASTGROUP -R $ASTDIRSRECURSIVE
}
start() {
- mkdir -p $WORKDIR
-
- # Create the users.
- config_load ${MODULENAME}-users
- config_foreach pbx_add_user local_user
-
- # Create configuration for each google account.
- config_unset
- config_load ${MODULENAME}-google
- config_foreach pbx_add_jabber gtalk_jabber
-
- # Create configuration for each voip provider.
- config_unset
- config_load ${MODULENAME}-voip
- config_foreach pbx_add_peer voip_provider
-
- # Create the user contexts, and phone blacklist.
- config_unset
- config_load ${MODULENAME}-calls
- pbx_create_user_contexts
- pbx_add_blacklist
- config_foreach pbx_add_callthrough callthrough_numbers
-
- # Prepare sip.conf using settings from the "advanced" section.
- config_unset
- config_load ${MODULENAME}-advanced
- pbx_cook_sip_template
- pbx_cook_rtp_template
-
- # Assemble the configuration, and copy changed files over.
- pbx_assemble_and_copy_config
-
- # Enforce ownership of specified files and directories.
- pbx_fix_ownership
-}
-
+ mkdir -p $WORKDIR
+
+ # Create the users.
+ config_load ${MODULENAME}-users
+ config_foreach pbx_add_user local_user
+
+ # Create configuration for each google account.
+ config_unset
+ config_load ${MODULENAME}-google
+ config_foreach pbx_add_jabber gtalk_jabber
+
+ # Create configuration for each voip provider.
+ config_unset
+ config_load ${MODULENAME}-voip
+ config_foreach pbx_add_peer voip_provider
+
+ # Create the user contexts, and phone blacklist.
+ config_unset
+ config_load ${MODULENAME}-calls
+ pbx_create_user_contexts
+ pbx_add_blacklist
+ config_foreach pbx_add_callthrough callthrough_numbers
+
+ # Prepare sip.conf using settings from the "advanced" section.
+ config_unset
+ config_load ${MODULENAME}-advanced
+ pbx_cook_sip_template
+ pbx_cook_rtp_template
+
+ # Assemble the configuration, and copy changed files over.
+ pbx_assemble_and_copy_config
+
+ # Enforce ownership of specified files and directories.
+ pbx_fix_ownership
+}
\ No newline at end of file
projects / oweals / luci.git / commitdiff