usb: dwc3: Makefile: Make dwc3 driver compile in u-boot
authorKishon Vijay Abraham I <kishon@ti.com>
Mon, 23 Feb 2015 13:10:16 +0000 (18:40 +0530)
committerMarek Vasut <marex@denx.de>
Tue, 14 Apr 2015 03:48:10 +0000 (05:48 +0200)
Now that the entire dwc3 driver is adapted to compile with uboot build,
modify the Makefiles so that the dwc3 driver can be built.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Reviewed-by: Lukasz Majewski <l.majewski@samsung.com>
Makefile
drivers/usb/dwc3/Makefile
drivers/usb/gadget/udc/Makefile

index 950c960fe62d517ea28c3091ac485a8e804761b9..0f7d58388e63a0fcc3b42b2406fb10d38c4be627 100644 (file)
--- a/Makefile
+++ b/Makefile
@@ -650,8 +650,10 @@ libs-y += drivers/spi/
 libs-$(CONFIG_FMAN_ENET) += drivers/net/fm/
 libs-$(CONFIG_SYS_FSL_DDR) += drivers/ddr/fsl/
 libs-y += drivers/serial/
+libs-y += drivers/usb/dwc3/
 libs-y += drivers/usb/eth/
 libs-y += drivers/usb/gadget/
+libs-y += drivers/usb/gadget/udc/
 libs-y += drivers/usb/host/
 libs-y += drivers/usb/musb/
 libs-y += drivers/usb/musb-new/
index afaa767718e5017bb16a55dfc283209687f527ad..e455a5279c2b71c3859cb49c90bf9f2b6e326ced 100644 (file)
@@ -1,37 +1,8 @@
-ccflags-$(CONFIG_USB_DWC3_DEBUG)       := -DDEBUG
-ccflags-$(CONFIG_USB_DWC3_VERBOSE)     += -DVERBOSE_DEBUG
-
 obj-$(CONFIG_USB_DWC3)                 += dwc3.o
 
-dwc3-y                                 := core.o debug.o
-
-ifneq ($(filter y,$(CONFIG_USB_DWC3_HOST) $(CONFIG_USB_DWC3_DUAL_ROLE)),)
-       dwc3-y                          += host.o
-endif
-
-ifneq ($(filter y,$(CONFIG_USB_DWC3_GADGET) $(CONFIG_USB_DWC3_DUAL_ROLE)),)
-       dwc3-y                          += gadget.o ep0.o
-endif
-
-ifneq ($(CONFIG_DEBUG_FS),)
-       dwc3-y                          += debugfs.o
-endif
+dwc3-y                                 := core.o
 
-##
-# Platform-specific glue layers go here
-#
-# NOTICE: Make sure your glue layer doesn't depend on anything
-# which is arch-specific and that it compiles on all situations.
-#
-# We want to keep this requirement in order to be able to compile
-# the entire driver (with all its glue layers) on several architectures
-# and make sure it compiles fine. This will also help with allmodconfig
-# and allyesconfig builds.
-##
+dwc3-y                                 += gadget.o ep0.o
 
 obj-$(CONFIG_USB_DWC3_OMAP)            += dwc3-omap.o
-obj-$(CONFIG_USB_DWC3_EXYNOS)          += dwc3-exynos.o
-obj-$(CONFIG_USB_DWC3_PCI)             += dwc3-pci.o
-obj-$(CONFIG_USB_DWC3_KEYSTONE)                += dwc3-keystone.o
-obj-$(CONFIG_USB_DWC3_QCOM)            += dwc3-qcom.o
-obj-$(CONFIG_USB_DWC3_ST)              += dwc3-st.o
+obj-$(CONFIG_USB_DWC3_PHY_OMAP)                += ti_usb_phy.o
index be265aa0a2630e13a47407244193d6df87fb8851..12380f4e4e91fb22f3f6ddbde029fa4871f8353c 100644 (file)
@@ -1,4 +1,4 @@
 #
 # USB peripheral controller drivers
 #
-obj-$(CONFIG_USB_GADGET)       += udc-core.o
+obj-$(CONFIG_USB_DWC3_GADGET)  += udc-core.o