ehci: Add support for Qualcomm EHCI
authorMateusz Kulikowski <mateusz.kulikowski@gmail.com>
Thu, 31 Mar 2016 21:12:26 +0000 (23:12 +0200)
committerTom Rini <trini@konsulko.com>
Fri, 1 Apr 2016 21:18:11 +0000 (17:18 -0400)
This driver is able to reconfigure OTG controller into HOST mode.
Board can add board-specific initialization as board_prepare_usb().
It requires USB_ULPI_VIEWPORT enabled in board configuration.

Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
Acked-by: Marek Vasut <marex@denx.de>
Tested-by: Simon Glass <sjg@chromium.org>
doc/device-tree-bindings/usb/ehci-msm.txt [new file with mode: 0644]
drivers/usb/host/Kconfig
drivers/usb/host/Makefile
drivers/usb/host/ehci-msm.c [new file with mode: 0644]

diff --git a/doc/device-tree-bindings/usb/ehci-msm.txt b/doc/device-tree-bindings/usb/ehci-msm.txt
new file mode 100644 (file)
index 0000000..205bb07
--- /dev/null
@@ -0,0 +1,10 @@
+Chipidea EHCI controller (part of OTG controller) used on Qualcomm devices.
+
+Required properties:
+- compatible: must be "qcom,ehci-host"
+- reg: start address and size of the registers
+
+ehci@78d9000 {
+       compatible = "qcom,ehci-host";
+       reg = <0x78d9000 0x400>;
+};
index 93323741938294b8269149fc617ecbba3a8eeb56..d2363c80671403e809909d3cc5e95629f7792348 100644 (file)
@@ -74,6 +74,17 @@ config USB_EHCI_MX6
        ---help---
          Enables support for the on-chip EHCI controller on i.MX6 SoCs.
 
+config USB_EHCI_MSM
+       bool "Support for Qualcomm on-chip EHCI USB controller"
+       depends on DM_USB
+       select USB_ULPI_VIEWPORT
+       default n
+       ---help---
+         Enables support for the on-chip EHCI controller on Qualcomm
+         Snapdragon SoCs.
+         This driver supports combination of Chipidea USB controller
+         and Synapsys USB PHY in host mode only.
+
 config USB_EHCI_GENERIC
        bool "Support for generic EHCI USB controller"
        depends on OF_CONTROL
index 9a87d2bf62d2e79255a7e5e70066ebf7760661c3..507519ea72c7a72e32c5fa92d09f7bc0491f5d21 100644 (file)
@@ -43,6 +43,7 @@ obj-$(CONFIG_USB_EHCI_MX7) += ehci-mx6.o
 obj-$(CONFIG_USB_EHCI_OMAP) += ehci-omap.o
 obj-$(CONFIG_USB_EHCI_PPC4XX) += ehci-ppc4xx.o
 obj-$(CONFIG_USB_EHCI_MARVELL) += ehci-marvell.o
+obj-$(CONFIG_USB_EHCI_MSM) += ehci-msm.o
 obj-$(CONFIG_USB_EHCI_PCI) += ehci-pci.o
 obj-$(CONFIG_USB_EHCI_SPEAR) += ehci-spear.o
 obj-$(CONFIG_USB_EHCI_SUNXI) += ehci-sunxi.o
diff --git a/drivers/usb/host/ehci-msm.c b/drivers/usb/host/ehci-msm.c
new file mode 100644 (file)
index 0000000..6484c1c
--- /dev/null
@@ -0,0 +1,178 @@
+/*
+ * Qualcomm EHCI driver
+ *
+ * (C) Copyright 2015 Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
+ *
+ * Based on Linux driver
+ *
+ * SPDX-License-Identifier:    GPL-2.0+
+ */
+
+#include <common.h>
+#include <dm.h>
+#include <errno.h>
+#include <fdtdec.h>
+#include <libfdt.h>
+#include <usb.h>
+#include <usb/ehci-ci.h>
+#include <usb/ulpi.h>
+#include <wait_bit.h>
+#include <asm/gpio.h>
+#include <asm/io.h>
+#include <linux/compat.h>
+#include "ehci.h"
+
+/* PHY viewport regs */
+#define ULPI_MISC_A_READ         0x96
+#define ULPI_MISC_A_SET          0x97
+#define ULPI_MISC_A_CLEAR        0x98
+#define ULPI_MISC_A_VBUSVLDEXTSEL    (1 << 1)
+#define ULPI_MISC_A_VBUSVLDEXT       (1 << 0)
+
+#define GEN2_SESS_VLD_CTRL_EN (1 << 7)
+
+#define SESS_VLD_CTRL         (1 << 25)
+
+struct msm_ehci_priv {
+       struct ehci_ctrl ctrl; /* Needed by EHCI */
+       struct usb_ehci *ehci; /* Start of IP core*/
+       struct ulpi_viewport ulpi_vp; /* ULPI Viewport */
+};
+
+int __weak board_prepare_usb(enum usb_init_type type)
+{
+       return 0;
+}
+
+static void setup_usb_phy(struct msm_ehci_priv *priv)
+{
+       /* Select and enable external configuration with USB PHY */
+       ulpi_write(&priv->ulpi_vp, (u8 *)ULPI_MISC_A_SET,
+                  ULPI_MISC_A_VBUSVLDEXTSEL | ULPI_MISC_A_VBUSVLDEXT);
+}
+
+static void reset_usb_phy(struct msm_ehci_priv *priv)
+{
+       /* Disable VBUS mimicing in the controller. */
+       ulpi_write(&priv->ulpi_vp, (u8 *)ULPI_MISC_A_CLEAR,
+                  ULPI_MISC_A_VBUSVLDEXTSEL | ULPI_MISC_A_VBUSVLDEXT);
+}
+
+
+static int msm_init_after_reset(struct ehci_ctrl *dev)
+{
+       struct msm_ehci_priv *p = container_of(dev, struct msm_ehci_priv, ctrl);
+       struct usb_ehci *ehci = p->ehci;
+
+       /* select ULPI phy */
+       writel(PORT_PTS_ULPI, &ehci->portsc);
+       setup_usb_phy(p);
+
+       /* Enable sess_vld */
+       setbits_le32(&ehci->genconfig2, GEN2_SESS_VLD_CTRL_EN);
+
+       /* Enable external vbus configuration in the LINK */
+       setbits_le32(&ehci->usbcmd, SESS_VLD_CTRL);
+
+       /* USB_OTG_HS_AHB_BURST */
+       writel(0x0, &ehci->sbuscfg);
+
+       /* USB_OTG_HS_AHB_MODE: HPROT_MODE */
+       /* Bus access related config. */
+       writel(0x08, &ehci->sbusmode);
+
+       /* set mode to host controller */
+       writel(CM_HOST, &ehci->usbmode);
+
+       return 0;
+}
+
+static const struct ehci_ops msm_ehci_ops = {
+       .init_after_reset = msm_init_after_reset
+};
+
+static int ehci_usb_probe(struct udevice *dev)
+{
+       struct msm_ehci_priv *p = dev_get_priv(dev);
+       struct usb_ehci *ehci = p->ehci;
+       struct ehci_hccr *hccr;
+       struct ehci_hcor *hcor;
+       int ret;
+
+       hccr = (struct ehci_hccr *)((phys_addr_t)&ehci->caplength);
+       hcor = (struct ehci_hcor *)((phys_addr_t)hccr +
+                       HC_LENGTH(ehci_readl(&(hccr)->cr_capbase)));
+
+       ret = board_prepare_usb(USB_INIT_HOST);
+       if (ret < 0)
+               return ret;
+
+       return ehci_register(dev, hccr, hcor, &msm_ehci_ops, 0, USB_INIT_HOST);
+}
+
+static int ehci_usb_remove(struct udevice *dev)
+{
+       struct msm_ehci_priv *p = dev_get_priv(dev);
+       struct usb_ehci *ehci = p->ehci;
+       int ret;
+
+       ret = ehci_deregister(dev);
+       if (ret)
+               return ret;
+
+       /* Stop controller. */
+       clrbits_le32(&ehci->usbcmd, CMD_RUN);
+
+       reset_usb_phy(p);
+
+       ret = board_prepare_usb(USB_INIT_DEVICE); /* Board specific hook */
+       if (ret < 0)
+               return ret;
+
+       /* Reset controller */
+       setbits_le32(&ehci->usbcmd, CMD_RESET);
+
+       /* Wait for reset */
+       if (wait_for_bit(__func__, &ehci->usbcmd, CMD_RESET, false, 30,
+                        false)) {
+               printf("Stuck on USB reset.\n");
+               return -ETIMEDOUT;
+       }
+
+       return 0;
+}
+
+static int ehci_usb_ofdata_to_platdata(struct udevice *dev)
+{
+       struct msm_ehci_priv *priv = dev_get_priv(dev);
+
+       priv->ulpi_vp.port_num = 0;
+       priv->ehci = (void *)dev_get_addr(dev);
+
+       if (priv->ehci == (void *)FDT_ADDR_T_NONE)
+               return -EINVAL;
+
+       /* Warning: this will not work if viewport address is > 64 bit due to
+        * ULPI design.
+        */
+       priv->ulpi_vp.viewport_addr = (phys_addr_t)&priv->ehci->ulpi_viewpoint;
+
+       return 0;
+}
+
+static const struct udevice_id ehci_usb_ids[] = {
+       { .compatible = "qcom,ehci-host", },
+       { }
+};
+
+U_BOOT_DRIVER(usb_ehci) = {
+       .name   = "ehci_msm",
+       .id     = UCLASS_USB,
+       .of_match = ehci_usb_ids,
+       .ofdata_to_platdata = ehci_usb_ofdata_to_platdata,
+       .probe = ehci_usb_probe,
+       .remove = ehci_usb_remove,
+       .ops    = &ehci_usb_ops,
+       .priv_auto_alloc_size = sizeof(struct msm_ehci_priv),
+       .flags  = DM_FLAG_ALLOC_PRIV_DMA,
+};