New header file opensslconf.h contains the macros set by Configure.

The configuration process could use some more clean-ups.

diff --git a/crypto/Makefile.ssl b/crypto/Makefile.ssl
index a0c972276c30e559eb2094a4f7325f1746fa99a6..c62786cc6df04881738f52a8cf7a7748a6ccd620 100644 (file)
--- a/crypto/Makefile.ssl
+++ b/crypto/Makefile.ssl
@@ -40,7 +40,7 @@ LIBOBJ= cryptlib.o mem.o cversion.o ex_data.o tmdiff.o $(ERRC).o
 SRC= $(LIBSRC)
 
 EXHEADER= crypto.h cryptall.h tmdiff.h opensslv.h
-HEADER=        cryptlib.h date.h $(EXHEADER)
+HEADER=        cryptlib.h date.h opensslconf.h $(EXHEADER)
 
 ALL=    $(GENERAL) $(SRC) $(HEADER)
 

diff --git a/crypto/opensslconf.h.in b/crypto/opensslconf.h.in
new file mode 100644 (file)
index 0000000..c858513
--- /dev/null
+++ b/crypto/opensslconf.h.in
@@ -0,0 +1,151 @@
+/* crypto/opensslconf.h */
+/* WARNING: This file is autogenerated by Configure */
+
+#if defined(HEADER_IDEA_H) && !defined(IDEA_INT)
+#define IDEA_INT unsigned int
+#endif
+
+#if defined(HEADER_MD2_H) && !defined(MD2_INT)
+#define MD2_INT unsigned int
+#endif
+
+#if defined(HEADER_RC2_H) && !defined(RC2_INT)
+/* I need to put in a mod for the alpha - eay */
+#define RC2_INT unsigned int
+#endif
+
+#if defined(HEADER_RC4_H) && !defined(RC4_INT)
+/* using int types make the structure larger but make the code faster
+ * on most boxes I have tested - up to %20 faster. */
+#define RC4_INT unsigned int
+#endif
+
+#if defined(HEADER_DES_H) && !defined(DES_LONG)
+/* If this is set to 'unsigned int' on a DEC Alpha, this gives about a
+ * %20 speed up (longs are 8 bytes, int's are 4). */
+#ifndef DES_LONG
+#define DES_LONG unsigned long
+#endif
+#endif
+
+#if defined(HEADER_BN_H) && !defined(CONFIG_HEADER_BN_H)
+#define CONFIG_HEADER_BN_H
+#define BN_LLONG
+
+/* Should we define BN_DIV2W here? */
+
+/* Only one for the following should be defined */
+/* The prime number generation stuff may not work when
+ * EIGHT_BIT but I don't care since I've only used this mode
+ * for debuging the bignum libraries */
+#undef SIXTY_FOUR_BIT_LONG
+#undef SIXTY_FOUR_BIT
+#define THIRTY_TWO_BIT
+#undef SIXTEEN_BIT
+#undef EIGHT_BIT
+#endif
+
+#if defined(HEADER_RC4_LOCL_H) && !defined(CONFIG_HEADER_RC4_LOCL_H)
+#define CONFIG_HEADER_RC4_LOCL_H
+/* if this is defined data[i] is used instead of *data, this is a %20
+ * speedup on x86 */
+#define RC4_INDEX
+#endif
+
+#if defined(HEADER_BF_LOCL_H) && !defined(CONFIG_HEADER_BF_LOCL_H)
+#define CONFIG_HEADER_BF_LOCL_H
+/* Special defines which change the way the code is built depending on the
+   CPU and OS.  For SGI machines you can use _MIPS_SZLONG (32 or 64) to find
+   even newer MIPS CPU's, but at the moment one size fits all for
+   optimization options.  Older Sparc's work better with only UNROLL, but
+   there's no way to tell at compile time what it is you're running on */
+
+#if defined( sun )                    /* Newer Sparc's */
+#  define BF_PTR
+#elif defined( __ultrix )     /* Older MIPS */
+#  define BF_PTR
+#elif defined( __sgi )                /* Newer MIPS */
+#  define BF_PTR
+#endif /* Systems-specific speed defines */
+
+/* use BF_PTR2 for intel boxes,
+ * BF_PTR for sparc and MIPS/SGI
+ * use nothing for Alpha and HP.
+ */
+#if !defined(BF_PTR) && !defined(BF_PTR2)
+#define BF_PTR2
+#endif
+#endif /* HEADER_BF_LOCL_H */
+
+#if defined(HEADER_DES_LOCL_H) && !defined(CONFIG_HEADER_DES_LOCL_H)
+#define CONFIG_HEADER_DES_LOCL_H
+#ifndef DES_DEFAULT_OPTIONS
+/* the following is tweaked from a config script, that is why it is a
+ * protected undef/define */
+#ifndef DES_PTR
+#define DES_PTR
+#endif
+
+/* This helps C compiler generate the correct code for multiple functional
+ * units.  It reduces register dependancies at the expense of 2 more
+ * registers */
+#ifndef DES_RISC1
+#define DES_RISC1
+#endif
+
+#ifndef DES_RISC2
+#undef DES_RISC2
+#endif
+
+#if defined(DES_RISC1) && defined(DES_RISC2)
+YOU SHOULD NOT HAVE BOTH DES_RISC1 AND DES_RISC2 DEFINED!!!!!
+#endif
+
+/* Unroll the inner loop, this sometimes helps, sometimes hinders.
+ * Very mucy CPU dependant */
+#ifndef DES_UNROLL
+#define DES_UNROLL
+#endif
+
+/* These default values were supplied by
+ * Peter Gutman <pgut001@cs.auckland.ac.nz>
+ * They are only used if nothing else has been defined */
+#if !defined(DES_PTR) && !defined(DES_RISC1) && !defined(DES_RISC2) && !defined(DES_UNROLL)
+/* Special defines which change the way the code is built depending on the
+   CPU and OS.  For SGI machines you can use _MIPS_SZLONG (32 or 64) to find
+   even newer MIPS CPU's, but at the moment one size fits all for
+   optimization options.  Older Sparc's work better with only UNROLL, but
+   there's no way to tell at compile time what it is you're running on */
+ 
+#if defined( sun )             /* Newer Sparc's */
+#  define DES_PTR
+#  define DES_RISC1
+#  define DES_UNROLL
+#elif defined( __ultrix )      /* Older MIPS */
+#  define DES_PTR
+#  define DES_RISC2
+#  define DES_UNROLL
+#elif defined( __osf1__ )      /* Alpha */
+#  define DES_PTR
+#  define DES_RISC2
+#elif defined ( _AIX )         /* RS6000 */
+  /* Unknown */
+#elif defined( __hpux )                /* HP-PA */
+  /* Unknown */
+#elif defined( __aux )         /* 68K */
+  /* Unknown */
+#elif defined( __dgux )                /* 88K (but P6 in latest boxes) */
+#  define DES_UNROLL
+#elif defined( __sgi )         /* Newer MIPS */
+#  define DES_PTR
+#  define DES_RISC2
+#  define DES_UNROLL
+#elif defined( i386 )          /* x86 boxes, should be gcc */
+#  define DES_PTR
+#  define DES_RISC1
+#  define DES_UNROLL
+#endif /* Systems-specific speed defines */
+#endif
+
+#endif /* DES_DEFAULT_OPTIONS */
+#endif /* HEADER_DES_LOCL_H */