rockchip: dts: tinker: Add tinker-s board support

Support tinker-s board. The board is equivalent of tinker board
except of emmc.

TODO:
- support of usb current burst when the board is powered from pc

Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>

diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index c22fbaf2255edd93da38c821676d570aa37f8b9c..d8846df1bdd9031d059f0df69f0a656153e71a1d 100644 (file)
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -90,6 +90,7 @@ dtb-$(CONFIG_ROCKCHIP_RK3288) += \
        rk3288-popmetal.dtb \
        rk3288-rock2-square.dtb \
        rk3288-tinker.dtb \
+       rk3288-tinker-s.dtb \
        rk3288-veyron-jerry.dtb \
        rk3288-veyron-mickey.dtb \
        rk3288-veyron-minnie.dtb \

diff --git a/arch/arm/dts/rk3288-tinker-s-u-boot.dtsi b/arch/arm/dts/rk3288-tinker-s-u-boot.dtsi
new file mode 100644 (file)
index 0000000..a177fca
--- /dev/null
+++ b/arch/arm/dts/rk3288-tinker-s-u-boot.dtsi
@@ -0,0 +1,34 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2019 Amarula Solutions SRO
+ */
+
+#include "rk3288-u-boot.dtsi"
+#include "rk3288-tinker-u-boot.dtsi"
+
+/ {
+       chosen {
+               u-boot,spl-boot-order = \
+                       "same-as-spl", &sdmmc, &emmc;
+       };
+};
+
+&emmc {
+       u-boot,dm-spl;
+};
+
+&emmc_clk {
+       u-boot,dm-spl;
+};
+
+&emmc_cmd {
+       u-boot,dm-spl;
+};
+
+&emmc_pwr {
+       u-boot,dm-spl;
+};
+
+&emmc_bus8 {
+       u-boot,dm-spl;
+};

diff --git a/arch/arm/dts/rk3288-tinker-s.dts b/arch/arm/dts/rk3288-tinker-s.dts
new file mode 100644 (file)
index 0000000..cc7ac5f
--- /dev/null
+++ b/arch/arm/dts/rk3288-tinker-s.dts
@@ -0,0 +1,29 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2017 Fuzhou Rockchip Electronics Co., Ltd.
+ */
+
+/dts-v1/;
+
+#include "rk3288-tinker.dtsi"
+
+/ {
+       model = "Rockchip RK3288 Asus Tinker Board S";
+       compatible = "asus,rk3288-tinker-s", "rockchip,rk3288";
+
+       chosen {
+               stdout-path = &uart2;
+       };
+};
+
+&emmc {
+       bus-width = <8>;
+       cap-mmc-highspeed;
+       non-removable;
+       pinctrl-names = "default";
+       pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_pwr &emmc_bus8>;
+       max-frequency = <150000000>;
+       mmc-hs200-1_8v;
+       mmc-ddr-1_8v;
+       status = "okay";
+};

diff --git a/board/rockchip/tinker_rk3288/MAINTAINERS b/board/rockchip/tinker_rk3288/MAINTAINERS
index cddceafb6e93ac0e1c3bac858dd65ec0333f85a5..ed5de682c97761fd22f0a16c67d82a8e58c31229 100644 (file)
--- a/board/rockchip/tinker_rk3288/MAINTAINERS
+++ b/board/rockchip/tinker_rk3288/MAINTAINERS
@@ -4,3 +4,10 @@ S:     Maintained
 F:     board/rockchip/tinker_rk3288
 F:     include/configs/tinker_rk3288.h
 F:     configs/tinker-rk3288_defconfig
+
+TINKER-S-RK3288
+M:     Michael Trimarchi <michael@amarulasolutions.com>
+S:     Maintained
+F:     board/rockchip/tinker_rk3288
+F:     include/configs/tinker_rk3288.h
+F:     configs/tinker-s-rk3288_defconfig

diff --git a/board/rockchip/tinker_rk3288/tinker-rk3288.c b/board/rockchip/tinker_rk3288/tinker-rk3288.c
index 6c76c3c25c4d644a5f6c2c27357dec7d6f56b4a8..7a0c3c997d9bddb483777e1c7762ac0ad7645877 100644 (file)
--- a/board/rockchip/tinker_rk3288/tinker-rk3288.c
+++ b/board/rockchip/tinker_rk3288/tinker-rk3288.c
@@ -8,6 +8,8 @@
 #include <env.h>
 #include <i2c_eeprom.h>
 #include <netdev.h>
+#include <asm/arch-rockchip/bootrom.h>
+#include <asm/io.h>
 
 static int get_ethaddr_from_eeprom(u8 *addr)
 {
@@ -33,3 +35,13 @@ int rk3288_board_late_init(void)
 
        return 0;
 }
+
+int mmc_get_env_dev(void)
+{
+       u32 bootdevice_brom_id = readl(BROM_BOOTSOURCE_ID_ADDR);
+
+       if (bootdevice_brom_id == BROM_BOOTSOURCE_EMMC)
+               return 0;
+
+       return 1;
+}

diff --git a/configs/tinker-s-rk3288_defconfig b/configs/tinker-s-rk3288_defconfig
new file mode 100644 (file)
index 0000000..c851a93
--- /dev/null
+++ b/configs/tinker-s-rk3288_defconfig
@@ -0,0 +1,99 @@
+CONFIG_ARM=y
+CONFIG_ARCH_ROCKCHIP=y
+CONFIG_SYS_TEXT_BASE=0x01000000
+CONFIG_SPL_GPIO_SUPPORT=y
+CONFIG_ROCKCHIP_RK3288=y
+CONFIG_TARGET_TINKER_RK3288=y
+CONFIG_NR_DRAM_BANKS=1
+CONFIG_SPL_SIZE_LIMIT=307200
+CONFIG_SPL_STACK_R_ADDR=0x800000
+CONFIG_DEBUG_UART_BASE=0xff690000
+CONFIG_DEBUG_UART_CLOCK=24000000
+CONFIG_DEBUG_UART=y
+CONFIG_TPL_SYS_MALLOC_F_LEN=0x4000
+CONFIG_SPL_SYS_MALLOC_F_LEN=0x4000
+CONFIG_SYS_MALLOC_F_LEN=0x4000
+# CONFIG_ANDROID_BOOT_IMAGE is not set
+CONFIG_USE_PREBOOT=y
+CONFIG_SILENT_CONSOLE=y
+CONFIG_CONSOLE_MUX=y
+CONFIG_DEFAULT_FDT_FILE="rk3288-tinker-s.dtb"
+# CONFIG_DISPLAY_CPUINFO is not set
+CONFIG_DISPLAY_BOARDINFO_LATE=y
+CONFIG_SPL_STACK_R=y
+CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x300000
+CONFIG_SPL_I2C_SUPPORT=y
+CONFIG_SPL_POWER_SUPPORT=y
+CONFIG_CMD_GPIO=y
+CONFIG_CMD_GPT=y
+CONFIG_CMD_I2C=y
+CONFIG_CMD_MMC=y
+CONFIG_CMD_SF=y
+CONFIG_CMD_SPI=y
+CONFIG_CMD_USB=y
+CONFIG_CMD_USB_MASS_STORAGE=y
+# CONFIG_CMD_SETEXPR is not set
+CONFIG_CMD_BMP=y
+CONFIG_CMD_CACHE=y
+CONFIG_CMD_TIME=y
+CONFIG_CMD_PMIC=y
+CONFIG_CMD_REGULATOR=y
+# CONFIG_SPL_DOS_PARTITION is not set
+# CONFIG_SPL_EFI_PARTITION is not set
+CONFIG_SPL_PARTITION_UUIDS=y
+CONFIG_SPL_OF_CONTROL=y
+CONFIG_DEFAULT_DEVICE_TREE="rk3288-tinker-s"
+CONFIG_OF_SPL_REMOVE_PROPS="clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
+CONFIG_ENV_IS_IN_MMC=y
+CONFIG_REGMAP=y
+CONFIG_SPL_REGMAP=y
+CONFIG_SYSCON=y
+CONFIG_SPL_SYSCON=y
+# CONFIG_SPL_SIMPLE_BUS is not set
+CONFIG_CLK=y
+CONFIG_SPL_CLK=y
+CONFIG_FASTBOOT_FLASH=y
+CONFIG_FASTBOOT_FLASH_MMC_DEV=0
+CONFIG_FASTBOOT_CMD_OEM_FORMAT=y
+CONFIG_ROCKCHIP_GPIO=y
+CONFIG_SYS_I2C_ROCKCHIP=y
+CONFIG_MISC=y
+CONFIG_I2C_EEPROM=y
+CONFIG_MMC_DW=y
+CONFIG_MMC_DW_ROCKCHIP=y
+CONFIG_SPI_FLASH=y
+CONFIG_SF_DEFAULT_SPEED=20000000
+CONFIG_DM_ETH=y
+CONFIG_ETH_DESIGNWARE=y
+CONFIG_GMAC_ROCKCHIP=y
+CONFIG_PINCTRL=y
+CONFIG_SPL_PINCTRL=y
+CONFIG_DM_PMIC=y
+CONFIG_PMIC_RK8XX=y
+CONFIG_SPL_DM_REGULATOR=y
+CONFIG_DM_REGULATOR_FIXED=y
+CONFIG_SPL_DM_REGULATOR_FIXED=y
+CONFIG_REGULATOR_RK8XX=y
+CONFIG_PWM_ROCKCHIP=y
+CONFIG_RAM=y
+CONFIG_SPL_RAM=y
+CONFIG_DEBUG_UART_SHIFT=2
+CONFIG_SYSRESET=y
+CONFIG_USB=y
+CONFIG_USB_DWC2=y
+CONFIG_ROCKCHIP_USB2_PHY=y
+CONFIG_USB_GADGET=y
+CONFIG_USB_GADGET_MANUFACTURER="Rockchip"
+CONFIG_USB_GADGET_VENDOR_NUM=0x2207
+CONFIG_USB_GADGET_PRODUCT_NUM=0x320a
+CONFIG_USB_GADGET_DWC2_OTG=y
+CONFIG_USB_HOST_ETHER=y
+CONFIG_USB_ETHER_ASIX=y
+CONFIG_USB_ETHER_SMSC95XX=y
+CONFIG_CMD_DHRYSTONE=y
+CONFIG_ERRNO_STR=y
+CONFIG_DM_VIDEO=y
+CONFIG_DISPLAY=y
+CONFIG_VIDEO_ROCKCHIP=y
+CONFIG_DISPLAY_ROCKCHIP_HDMI=y
+CONFIG_CONSOLE_SCROLL_LINES=10

diff --git a/include/configs/tinker_rk3288.h b/include/configs/tinker_rk3288.h
index 5adae68c91bbde65589b4b41e9d36cdb29357d0e..f8a55a2cec60d31b594b2c558b2dababb259cd2f 100644 (file)
--- a/include/configs/tinker_rk3288.h
+++ b/include/configs/tinker_rk3288.h
@@ -12,6 +12,7 @@
 #undef BOOT_TARGET_DEVICES
 
 #define BOOT_TARGET_DEVICES(func) \
+       func(MMC, mmc, 0) \
        func(MMC, mmc, 1) \
        func(USB, usb, 0) \
        func(PXE, pxe, na) \