keystone: set default pci mode to root complex
authorKaricheri, Muralidharan <m-karicheri2@ti.com>
Tue, 9 Dec 2014 19:32:26 +0000 (14:32 -0500)
committerTom Rini <trini@ti.com>
Mon, 5 Jan 2015 20:13:47 +0000 (15:13 -0500)
pci ports are used as root complex in Linux. So set this as default
in u-boot for keystone devices

Signed-off-by: Murali Karicheri <m-karicheri2@ti.com>
arch/arm/cpu/armv7/keystone/init.c
arch/arm/include/asm/arch-keystone/hardware.h

index c2b947839d292a14090e15d951703eb99e517f6e..c96845c4e27b93600454daa07d9cc87e483d39a2 100644 (file)
 #include <asm/arch/hardware.h>
 #include <asm/arch/psc_defs.h>
 
+#define MAX_PCI_PORTS          2
+enum pci_mode  {
+       ENDPOINT,
+       LEGACY_ENDPOINT,
+       ROOTCOMPLEX,
+};
+
+#define DEVCFG_MODE_MASK               (BIT(2) | BIT(1))
+#define DEVCFG_MODE_SHIFT              1
+
 void chip_configuration_unlock(void)
 {
        __raw_writel(KS2_KICK0_MAGIC, KS2_KICK0);
@@ -68,6 +78,24 @@ void osr_init(void)
 }
 #endif
 
+/* Function to set up PCIe mode */
+static void config_pcie_mode(int pcie_port,  enum pci_mode mode)
+{
+       u32 val = __raw_readl(KS2_DEVCFG);
+
+       if (pcie_port >= MAX_PCI_PORTS)
+               return;
+
+       /**
+        * each pci port has two bits for mode and it starts at
+        * bit 1. So use port number to get the right bit position.
+        */
+       pcie_port <<= 1;
+       val &= ~(DEVCFG_MODE_MASK << pcie_port);
+       val |= ((mode << DEVCFG_MODE_SHIFT) << pcie_port);
+       __raw_writel(val, KS2_DEVCFG);
+}
+
 int arch_cpu_init(void)
 {
        chip_configuration_unlock();
@@ -77,8 +105,13 @@ int arch_cpu_init(void)
        msmc_share_all_segments(KS2_MSMC_SEGMENT_NETCP);
        msmc_share_all_segments(KS2_MSMC_SEGMENT_QM_PDSP);
        msmc_share_all_segments(KS2_MSMC_SEGMENT_PCIE0);
+
+       /* Initialize the PCIe-0 to work as Root Complex */
+       config_pcie_mode(0, ROOTCOMPLEX);
 #if defined(CONFIG_SOC_K2E) || defined(CONFIG_SOC_K2L)
        msmc_share_all_segments(KS2_MSMC_SEGMENT_PCIE1);
+       /* Initialize the PCIe-1 to work as Root Complex */
+       config_pcie_mode(1, ROOTCOMPLEX);
 #endif
 #ifdef CONFIG_SOC_K2L
        osr_init();
index be22bdb1ca2c0502f7e30fc7363ede26b4d0aeba..16cbcee12b58534ac93afb3dfd0721ced3192eea 100644 (file)
@@ -144,6 +144,7 @@ typedef volatile unsigned int   *dv_reg_p;
 #define KS2_DEVICE_STATE_CTRL_BASE     0x02620000
 #define KS2_JTAG_ID_REG                        (KS2_DEVICE_STATE_CTRL_BASE + 0x18)
 #define KS2_DEVSTAT                    (KS2_DEVICE_STATE_CTRL_BASE + 0x20)
+#define KS2_DEVCFG                     (KS2_DEVICE_STATE_CTRL_BASE + 0x14c)
 
 /* PSC */
 #define KS2_PSC_BASE                   0x02350000